Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. W. Wheeler, “RF Power Sources”, in Proc. LINAC'61, Long Island, NY, USA, Apr. 1961, paper TALKS-10, pp. 52-54.
[n] H.-H. Tsai, F.-Z. Hsiao, W.-R. Liao, H.-C. Li, and P.-S. Chuang, “A Dual-System Approach for Upgrading the Helium Cryogenic System at the Taiwan Photon Source”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7672, unpublished.
[n] M. A. C. Cummings, R. P. Johnson, and T. J. Roberts, “GEM*STAR Accelerator-Driven Subcritical System for Improved Safety, Waste Management, and Plutonium Disposition”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1998-2000. doi:10.18429/JACoW-IPAC2016-TUPOY043
[n] A. Rhyder, G. R. Jackson, and A. Owen, “A software framework based on Qt for accessing EPICS data using Channel Access”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL002, pp. 30-32.
[n] D. Trbojevic, “Non-Scaling FFAG and their Applications”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2B04, pp. 482-486.
[n] N. Suradet, G. G. Hoyes, P. Klysubun, S. Krainara, P. Sudmuang, and S. Teawphet, “Improvement of the Siam Photon Source Beam Loss Monitor System”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 190-192. doi:10.18429/JACoW-IBIC2015-MOPB058
[n] P. Kneisel, “Topic 1: High-field Q-slope”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper WEA01, pp. 407-407.
[n] G. v and R. Mueller, “The Concept of Modernizing the BESSY Control System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 872-875.
[n] C. R. Emigh, “Statistical Beam Transport for High Intensity Ion Currents”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper H01, pp. 182-190.
[n] D. Gonnella, F. Furuta, and M. Liepe, “Heat Treatment of SRF Cavities in a Low-Pressure Atmosphere”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP029, pp. 487-489.
[n] K. E. Hacker, “Enhancing the Harmonic Content of an HGHG Microbunch”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP096, pp. 281-285.
[n] A. L. Robinson and A. S. Schlachter, “The ALS-A High-brightness XUV Synchrotron Radiation Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2640-2643.
[n] X. Wang, J. Chen, S. Huang, X. Ouyang, X. Wu, and Y. Zong, “Development of a TE-mode sample host cavity”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2795-2797. doi:10.18429/JACoW-IPAC2024-WEPS45
[n] C. F. Chang, “Real-Time Motor Control System for Beamlines”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 41-43. doi:10.18429/JACoW-MEDSI2016-MOPE18
[n] P. Hurh, “The Radiation Damage In Accelerator Target Environments (RaDIATE) Collaboration R&D Program - Status and Future Activities”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 117-120. doi:10.18429/JACoW-NAPAC2016-MOPOB23
[n] H. Braun, K. Huebner, and W. Joho, “Decay Rates and Average Luminosity in a B-Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 141-144.
[n] Y. Yin, “Experience on Overcoming Beam RF Interference to DCCT”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2012-2014.
[n] J. G. de Villiers, “A FLAT-TOPPING SYSTEM FOR THE SEPARATED SECTOR CYCLOTRON AT ITHEMBA LABS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P22, pp. XX-XX.
[n] C. M. Warsop, “Studies of Beam Loss Control on the ISIS Synchrotron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT143, pp. 1464-1466.
[n] G. Danby et al., “Unicell Structure for Superconducting Storage Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1614-1617.
[n] A. Afanasev and R. P. Johnson, “Raising Photoemission Efficiency with Surface Acoustic Waves”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP199, pp. 2492-2494.
[n] M. K. Czwalinna et al., “New Design of the 40 GHz Bunch Arrival Time Monitor Using MTCA.4 Electronics at FLASH and for the European XFEL”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC31, pp. 749-752.
[n] Y. Miyahara, “Touschek Lifetime of a Round and Elliptical Electron Beam”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A03, pp. 663-665.
[n] K.-G. Rensfelt et al., “DESIREE - A Double Electrostatic Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT124, pp. 1425-1427.
[n] Y. Ishizawa and A. Yamashita, “Development of Accelerator Management Systems with GIS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAB03, pp. 296-298.
[n] M. L. Lopes, V. S. Kashikhin, K. Yonehara, M. Yu, and A. V. Zlobin, “Studies of High-field Sections of a Muon Helical Cooling Channel with Coil Separation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP172, pp. 1148-1150.
[n] J. Tang et al., “Injection System Design for the CSNS/RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS118, pp. 1783-1785.
[n] M. Di Cosmo and B. Todd, “The New Modular Control System for Power Converters at CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 697-700. doi:10.18429/JACoW-ICALEPCS2015-WEPGF005
[n] G. Cojocaru et al., “Electron Beam Applications in Chemical Processing”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P101, pp. 3854-3856.
[n] M. Dracos, “The European Spallation Source neutrino Super Beam project and physics performance”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 535-538. doi:10.18429/JACoW-IPAC2025-MOPM091
[n] P. Eyharts, P. Anthouard, J. Bardy, P. Eyl, and M. Thevenot, “LELIA: An Induction Linac Developed for FEL Application”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3204-3207.
[n] S. Fang and M. Laverty, “RF CONTROL SYSTEMS FOR THE TRIUMF ISAC RF”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP011, pp. XX-XX.
[n] H. S. Marks, W. S. Graves, M. R. Holl, and L. E. Malin, “Low Level RF Test System for the Compact X-Ray Light Source at Arizona State University”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 680-682. doi:10.18429/JACoW-NAPAC2019-WEPLM07
[n] I. J. Gillingham, M. G. Abbott, T. M. Cobb, and M. T. Heron, “Diverse Uses of Python at Diamond”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP024, pp. 137-139.
[n] F. Perez, I. Birkel, E. Huttel, A.-S. Mueller, and M. Pont, “Beam Size and Bunch Length Measurements at the ANKA Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG044, pp. 3276-3278.
[n] M. Eriksson and L.-J. Lindgren, “The 500 MHz Cavity for the MAX II Synchrotron Light Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2083-2086.
[n] D. Brandt et al., “Beam Dynamics Effects in the CERN SPS Used as a Lepton Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1205-1208.
[n] K. Evans, “New Features in MEDM”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP37, pp. 744-746.
[n] J. F. DeFord, G. D. Craig, G. Kamin, and L. Walling, “Computation of Wakefields in Structures containing Dispersive Materials”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper WE1-04, pp. 550-554.
[n] C. L. Olson, C. A. Frost, R. A. Gerber, and J. R. Woodworth, “The IFA-2 Collective Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3349-3352.
[n] H. Jang, D. H. Gil, Y. Jung, H. Kim, Y. Kim, and M. Lee, “Development of a Digital LLRF System for SRF Cavities in RAON Accelerator”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 845. doi:10.18429/JACoW-SRF2021-THPTEV008
[n] K. Elsener et al., “What Did We Learn from the Extraction Experiments with Bent Crystals at the CERN SPS?”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOO01A, pp. 239-241.
[n] D. Angal-Kalinin et al., “Commissioning of the Indus-1 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B01, pp. 687-689.
[n] M. N. Wilson, “Technology Transfer on the Helios Project”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 347-350.
[n] J. Lyles, J. Upadhyay, W. Hall, and M. Sanchez Barrueta, “Future directions for RF buncher at LANSCE proton storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1687-1690. doi:10.18429/JACoW-IPAC2024-TUPS26
[n] J. Gray et al., “Understanding energy-induced optics distortions in the LHC”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5041, unpublished.
[n] P. Zhang et al., “Status and Progress of the RF System for High Energy Photon Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1165-1168. doi:10.18429/JACoW-IPAC2021-MOPAB380
[n] J. D. Lawson, “Beam Measurements in the Harwell Variable Energy Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 635-641.
[n] S. Kolbe, F. Römer, T. Sieber, V. Tympel, and B. Voß, “Systematic analysis and mitigation of disturbances in beam current measurements using dual SQUID readout”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6044, unpublished.
[n] F. Bosco et al., “Advanced studies for the dynamics of high brightness electron beams with the code MILES”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3574-3577. doi:10.18429/JACoW-IPAC2023-WEPL190
[n] A. Wrulich, “The Trieste Synchrotron Light Source ELETTRA”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 210-213.
[n] D. K. C. Chan, “Conceptual Design of a Superconducting High-Intensity Proton Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper WE204, pp. 580-586.
[n] J. R. Alonso, A. Chatterjee, and C. A. Tobias, “High Purity Radioactive Beams at the Bevalac”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3003-3006.
[n] A. Adelmann, P. Arbenz, C. Kraus, and M. Wittberger, “Comparison of h- and p- Refinement in a Finite Element Maxwell Time Domain Solver”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEA4IS04, pp. 288-288.
[n] C. L. Olson, “IFA Proof of Principle Experiments”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4231-4234.
[n] H. Dewa et al., “Pulsed Beam Current Monitor with a Toroidal Coil”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-64, pp. 854-856.
[n] Q. Yuan, M. Gu, G. Y. Jiang, and R. Wang, “The Feed-forward Control Design of Correction Coil Power Supply for SSRF EPU”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA032, pp. 2199-2201.
[n] Y.-C. Chao et al., “TRIUMF-VECC Electron Linac Beam Dynamics Optimization”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC012, pp. 277-280.
[n] V. A. Lebedev and A. L. Romanov, “Optical Stochastic Cooling at IOTA ring”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper WEWAUD03, pp. 123-127.
[n] S. G. Shasharina, J. R. Cary, M. A. Durant, S. E. Kruger, and S. A. Veitzer, “VizSchema - A Standard Approach for Visualization of Computational Accelerator Physics Data”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper WE2IOPK05, pp. 101-106.
[n] H. Araki, C. Carlos, C. Pira, E. Chyhyrynets, G. Rosaz, and M. Yamanaka, “RF measurement of plasma electrolytic polished 1.3 GHz full-seamless Nb/Cu cavities”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP42, unpublished.
[n] L. D. Hansborough, J. M. Potter, and N. G. Wilson, “Mechanical Design of RFQ Resonator Cavities in the 400-MHz Frequency Range”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper I03, pp. 329-331.
[n] A. Brinkmann, A. G?Âssel, W. D. M?Âller, M. Pekeler, and D. Proch, “Performance Degradation in Several TESLA 9-cell Cavities due to Weld Imperfections”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C05, pp. 452-456.
[n] M. Y. Huang, H. C. Liu, S. Wang, and S. Y. Xu, “Study on the Fixed Point Injection during the Beam Commissioning for CSNS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1017-1019. doi:10.18429/JACoW-IPAC2018-TUPAL005
[n] S. Kuzikov, “Simple Theory of Thermal Fatigue Caused by RF Pulse Heating”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP65, pp. 168-170.
[n] S. Roesler, M. Brugger, D. Forkel-Wirth, and J. Vollaire, “Studies of Induced Radioactivity and Residual Dose Rates around Beam Absorbers of Different Materials”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B01, pp. 448-452.
[n] H. Takei, K. Hirano, S. I. Meigo, and K. Tsutsumi, “Beam Extraction by the Laser Charge Exchange Method Using the 3-MeV LINACParc”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 435-439. doi:10.18429/JACoW-IBIC2017-WEPCF08
[n] P. Stoltz, C. Nieter, C. Roark, and J. D. A. Smith, “Benchmarking Multipacting Simulation for FEL Components”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB45, pp. 501-503.
[n] M. C. Bellachioma, M. Bender, H. Kollmus, A. Kr?ñmer, J. Kurdal, and H. Reich-Sprenger, “Thin Film Coating for the Upgrade of the Ion Synchrotron SIS18 at GSI”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP014, pp. 378-380.
[n] S. Yamin, R. W. A?ƒmann, and B. Marchetti, “Study for the Alignment of Focusing Solenoid of ARES RF Gun and Effect of Misalignment of Solenoid on Emittance of Space Charge Dominated Electron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 147-150. doi:10.18429/JACoW-IPAC2019-MOPGW028
[n] T. Sen, “Parametric X-rays at FAST”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1877-1880. doi:10.18429/JACoW-IPAC2016-TUPOW050
[n] E. Thrane et al., “Photoinjector Production of A Flat Electron Beam”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU404, pp. 308-310.
[n] V. Kiselev and V. Smaluk Budker Institute of Nuclear Physics, “A method for measurement of transverse impedance distribution along storage ring”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PT19, pp. XX-XX.
[n] S. Bai et al., “Machine Detector Interface for CEPC”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 217. doi:10.18429/JACoW-eeFACT2018-WEXBA05
[n] K. Satou et al., “Development of a Beam Induced Heat-Flow Monitor for the Beam Dump of the J-PARC RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN047, pp. 4084-4086.
[n] T. J. Roberts and D. M. Kaplan, “Advanced Multi-program GUI for Accelerator Modeling”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC062, pp. 1868-1870.
[n] X. Y. Chang et al., “Study of Secondary Emission Enhanced Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE042, pp. 2711-2713.
[n] A. Wu, “Investigation of Oxide Layer Structure on Niobium Surfaces Using a Secondary Ion Mass Spectrometer”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP08, pp. 251-253.
[n] M. Santana-Leitner, A. Ibrahimov, L. Y. Nicolas, S. H. Rokni, D. R. Walz, and J. J. Welch, “Beam Dumps of the New LCLS-II”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3973-3975. doi:10.18429/JACoW-IPAC2014-THPRI086
[n] L. R. Williams et al., “Mobile CT-System for In-situ Inspection in the LHC at CERN”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB076, pp. 447-449.
[n] F. W. Jones, T. Planche, and Y.-N. Rao, “Tracking in a Cyclotron with Geant4”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WE4PB01, pp. 423-425.
[n] H. Kamitsubo et al., “A Proposed Multi-Purpose Separated-Sector Cyclotron at IPCR”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-07, pp. 2070-2073.
[n] S. Gayadeen, S. Duncan, and M. T. Heron, “Fast Orbit Feedback Control in Mode Space”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THMIB07, pp. 1082-1085.
[n] S. M. Meykopff, “Converting the Emittance Measurement MATLAB Tool Into a C++ Control System Server”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOPHA094, pp. XX-XX.
[n] G. Kruk and M. Peryt, “JDataViewer - Java-based Charting Library”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP093, pp. 856-858.
[n] A. Barry, B. Bowling, J. Kewisch, and J. Tang, “Orbit Correction Techniques for a Multipass Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU450, pp. 444-446.
[n] C. Y. Wu et al., “RF Reference Distribution and Timing System for the Taiwan Photon Source”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD86, pp. 506-508.
[n] C. Crawford, A. Sery, V. Shiltsev, A. Aleksandrov, B. Skarbo, and B. Sukhina, “Magnetic Field Alignment in the Beam-Beam Compensation Device”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP152, pp. 3321-3323.
[n] Y. Jiao, X. Cui, X. Y. Huang, and G. Xu, “Suppression of the CSR-induced Emittance Growth in Achromats using Two-dimensional point-kick Analysis”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THC03, pp. 976-979.
[n] D. Zhu, R. T. Dowd, and Y. E. Tan, “Study of Material Choice in Beam Dumps for Energetic Electron Beams”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 721-723. doi:10.18429/JACoW-IPAC2022-MOPOMS039
[n] M. Iwasaki et al., “Evaluation of the Detector BG for SuperKEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB019, pp. 1557-1559.
[n] J. A. Brandt, “A Review of Ultrasonic Additive Manufacturing for Particle Accelerator Applications”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 185. doi:10.18429/JACoW-MEDSI2020-TUPC06
[n] Y. Baconnier et al., “The CERN Linear Collider Test Facility”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH452, pp. 733-735.
[n] D. Ramos, “Modeling of the RF-shield Sliding Contact Fingers for the LHC Cryogenic Beam Vacuum Interconnects Using Implicit and Explicit Finite Element Formulations”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD035, pp. 1503-1505.
[n] T. Hayes, F. Severino, and K. S. Smith, “A Deterministic, Gigabit Serial Timing, Synchronization and Data Link for the RHIC LLRF”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP282, pp. 642-644.
[n] G. Hoffstaetter et al., “Progress Toward an ERL Extension to CESR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOOBAB02, pp. 107-109.
[n] T. Spickermann et al., “Comparison of Carbon Stripper Foils Under Operational Conditions at the Los Alamos Proton Storage Ring”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC02, pp. 262-264.
[n] R. Keller, R. Thomae, and J. Reijonen, “Evolution of the LEBT Layout for SNS”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD19, pp. 253-255.
[n] M. Sawamura, E. Cenni, T. Furuya, H. Sakai, K. Umemori, and K. Shinoe, “HOM Properties of Main Linac for cERL in Japan”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG3003, pp. 87-90.
[n] S. Di Mitri, M. Cornacchia, S. V. Milton, and S. Spampinati, “Alternative Scheme of Bunch Length Compression in Linacs for Free Electron Lasers”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP033, pp. 1610-1612.
[n] J. G. Wang, “Tracking Stripped Proton Particles in SNS Ring Injection Momentum Dump Line”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP039, pp. 1567-1569.
[n] B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
[n] P. V. Verdier, “Re-Writing TANGO Code Generator Using openArchitectureWare Technology”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP080, pp. 827-829.
[n] J. Martin, “Beam Detector Impedance Calculation Using Circuit Models”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1127-1130.
[n] S. K?â, R. Andersson, E. Bargall?â, A. Nordt, and M. Rejzek, “Applying the Functional System Interaction Process at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 649-654. doi:10.18429/JACoW-ICALEPCS2017-TUPHA101
[n] S. Kh. Egamediev, S. Khujaev, and A. I. Muminov, “Production of Carrier-Free Germanium-68 by Alpha-Particle Bombardment Zinc Cyclotron Target”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-19, pp. XX-XX.
[n] J. Haimson, B. Mecklenburg, G. Stowell, and E. L. Wright, “A Fully Demountable 550 kV Electron Gun for Low Emittance Beam Experiments with a 17 GHz Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W029, pp. 2808-2810.
[n] M. F. Vorogushin, “NIIEFA Accelerators for Industry and Medicine”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRXCH01, pp. 167-171.
[n] M. Placidi, S. Di Mitri, C. Pellegrini, and G. Penn, “Compact FEL-Driven Inverse Compton Scattering Gamma-Ray Source”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 617-620. doi:10.18429/JACoW-FEL2019-THP012
[n] A. Azima et al., “Jitter Measurement by Spatial Electro-optical Sampling at the Flash Free Electron Laser”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH011, pp. 71-73.
[n] V. A. Moiseev and A. V. Feschenko, “Space Charge Effects in Bunch Shape Monitors”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC13, pp. 178-180.
[n] S. Ikeda, M. R. Costanzo, T. Kanesue, R. F. Lambiase, C. J. Liaw, and M. Okamura, “Control of Laser Ablation Plasma by Pulsed Magnetic Field for Heavy Ion Beam Production”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB28, pp. 259-261.
[n] Y. Iwashita, Y. Fuwa, M. Hino, T. Kubo, and T. Saeki, “Evaluation of Sc Property Coated on a Surface”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB062, pp. 723-725.
[n] J. Pforr et al., “Setup for Beam Profile Measurements using Optical Transition Radiation”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 494-497. doi:10.18429/JACoW-IBIC2018-WEPC04
[n] T. Kii et al., “Reducing Back-Bombardment Effect Using Thermionic Cathode in IAE RF Gun”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS21, pp. XX-XX.
[n] K. Saito et al., “Development of 1.3 GHz Medium- Structure with High Gradient”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C15, pp. 534-539.
[n] J. P. Sikora and S. De Santis, “Electron Cloud Density Measurements Using Resonant Microwaves at CesrTA”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF21, pp. 592-596.
[n] M. Giovannozzi, A. Bazzani, G. Turchetti, and S. Rambaldi, “Diffusion Phenomena in Simple Hamiltonian Systems: Some Analytical and Numerical Results”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 273-276.
[n] V. G. Vaccaro et al., “Design, Construction and Low Power RF Tests of the First Module of the ACLIP Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP132, pp. 1836-1838.
[n] Y.-J. Chen et al., “Compact Proton Injector and First Accelerator System Test for Compact Proton Dielectric Wall Cancer Therapy Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP094, pp. 1516-1518.
[n] G. Perdikakis, D. Bazin, J. Browne, D. Leitner, L. Y. Lin, and W. Wittmer, “Instrumentation at the Low Intensity Frontier: Diagnostics for the Stopped and Reaccelerated Beams of NSCL and FRIB”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG038, pp. 113-115.
For LaTeX
Use Complete Form
For BibTeX
References
- G. W. Wheeler, “RF Power Sources”, in Proc. 1961 Conf. on Linear Accelerators (LINAC'61), Long Island, NY, USA, Apr. 1961, paper TALKS-10, pp. 52-54.
- H.-H. Tsai, F.-Z. Hsiao, W.-R. Liao, H.-C. Li, and P.-S. Chuang, “A Dual-System Approach for Upgrading the Helium Cryogenic System at the Taiwan Photon Source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7672, this conference.
- M. A. C. Cummings, R. P. Johnson, and T. J. Roberts, “GEM*STAR Accelerator-Driven Subcritical System for Improved Safety, Waste Management, and Plutonium Disposition”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1998-2000.
- A. Rhyder, G. R. Jackson, and A. Owen, “A software framework based on Qt for accessing EPICS data using Channel Access”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL002, pp. 30-32.
- D. Trbojevic, “Non-Scaling FFAG and their Applications”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2B04, pp. 482-486.
- N. Suradet, G. G. Hoyes, P. Klysubun, S. Krainara, P. Sudmuang, and S. Teawphet, “Improvement of the Siam Photon Source Beam Loss Monitor System”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 190-192.
- P. Kneisel, “Topic 1: High-field Q-slope”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper WEA01, pp. 407-407.
- G. v and R. Mueller, “The Concept of Modernizing the BESSY Control System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 872-875.
- C. R. Emigh, “Statistical Beam Transport for High Intensity Ion Currents”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper H01, pp. 182-190.
- D. Gonnella, F. Furuta, and M. Liepe, “Heat Treatment of SRF Cavities in a Low-Pressure Atmosphere”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP029, pp. 487-489.
- K. E. Hacker, “Enhancing the Harmonic Content of an HGHG Microbunch”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP096, pp. 281-285.
- A. L. Robinson and A. S. Schlachter, “The ALS-A High-brightness XUV Synchrotron Radiation Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2640-2643.
- X. Wang, J. Chen, S. Huang, X. Ouyang, X. Wu, and Y. Zong, “Development of a TE-mode sample host cavity”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS45, pp. 2795-2797.
- C. F. Chang, “Real-Time Motor Control System for Beamlines”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 41-43.
- P. Hurh, “The Radiation Damage In Accelerator Target Environments (RaDIATE) Collaboration R&D Program - Status and Future Activities”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 117-120.
- H. Braun, K. Huebner, and W. Joho, “Decay Rates and Average Luminosity in a B-Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 141-144.
- Y. Yin, “Experience on Overcoming Beam RF Interference to DCCT”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2012-2014.
- J. G. de Villiers, “A FLAT-TOPPING SYSTEM FOR THE SEPARATED SECTOR CYCLOTRON AT ITHEMBA LABS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P22, pp. XX-XX.
- C. M. Warsop, “Studies of Beam Loss Control on the ISIS Synchrotron”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT143, pp. 1464-1466.
- G. Danby et al., “Unicell Structure for Superconducting Storage Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1614-1617.
- A. Afanasev and R. P. Johnson, “Raising Photoemission Efficiency with Surface Acoustic Waves”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP199, pp. 2492-2494.
- M. K. Czwalinna et al., “New Design of the 40 GHz Bunch Arrival Time Monitor Using MTCA.4 Electronics at FLASH and for the European XFEL”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC31, pp. 749-752.
- Y. Miyahara, “Touschek Lifetime of a Round and Elliptical Electron Beam”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A03, pp. 663-665.
- K.-G. Rensfelt et al., “DESIREE - A Double Electrostatic Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT124, pp. 1425-1427.
- Y. Ishizawa and A. Yamashita, “Development of Accelerator Management Systems with GIS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOAB03, pp. 296-298.
- M. L. Lopes, V. S. Kashikhin, K. Yonehara, M. Yu, and A. V. Zlobin, “Studies of High-field Sections of a Muon Helical Cooling Channel with Coil Separation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP172, pp. 1148-1150.
- J. Tang et al., “Injection System Design for the CSNS/RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS118, pp. 1783-1785.
- M. Di Cosmo and B. Todd, “The New Modular Control System for Power Converters at CERN”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 697-700.
- G. Cojocaru et al., “Electron Beam Applications in Chemical Processing”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P101, pp. 3854-3856.
- M. Dracos, “The European Spallation Source neutrino Super Beam project and physics performance”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM091, pp. 535-538.
- P. Eyharts, P. Anthouard, J. Bardy, P. Eyl, and M. Thevenot, “LELIA: An Induction Linac Developed for FEL Application”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3204-3207.
- S. Fang and M. Laverty, “RF CONTROL SYSTEMS FOR THE TRIUMF ISAC RF”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP011, pp. XX-XX.
- H. S. Marks, W. S. Graves, M. R. Holl, and L. E. Malin, “Low Level RF Test System for the Compact X-Ray Light Source at Arizona State University”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 680-682.
- I. J. Gillingham, M. G. Abbott, T. M. Cobb, and M. T. Heron, “Diverse Uses of Python at Diamond”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP024, pp. 137-139.
- F. Perez, I. Birkel, E. Huttel, A.-S. Mueller, and M. Pont, “Beam Size and Bunch Length Measurements at the ANKA Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG044, pp. 3276-3278.
- M. Eriksson and L.-J. Lindgren, “The 500 MHz Cavity for the MAX II Synchrotron Light Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2083-2086.
- D. Brandt et al., “Beam Dynamics Effects in the CERN SPS Used as a Lepton Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1205-1208.
- K. Evans, “New Features in MEDM”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP37, pp. 744-746.
- J. F. DeFord, G. D. Craig, G. Kamin, and L. Walling, “Computation of Wakefields in Structures containing Dispersive Materials”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper WE1-04, pp. 550-554.
- C. L. Olson, C. A. Frost, R. A. Gerber, and J. R. Woodworth, “The IFA-2 Collective Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3349-3352.
- H. Jang, D. H. Gil, Y. Jung, H. Kim, Y. Kim, and M. Lee, “Development of a Digital LLRF System for SRF Cavities in RAON Accelerator”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 845.
- K. Elsener et al., “What Did We Learn from the Extraction Experiments with Bent Crystals at the CERN SPS?”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOO01A, pp. 239-241.
- D. Angal-Kalinin et al., “Commissioning of the Indus-1 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B01, pp. 687-689.
- M. N. Wilson, “Technology Transfer on the Helios Project”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 347-350.
- J. Lyles, J. Upadhyay, W. Hall, and M. Sanchez Barrueta, “Future directions for RF buncher at LANSCE proton storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS26, pp. 1687-1690.
- J. Gray et al., “Understanding energy-induced optics distortions in the LHC”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5041, this conference.
- P. Zhang et al., “Status and Progress of the RF System for High Energy Photon Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1165-1168.
- J. D. Lawson, “Beam Measurements in the Harwell Variable Energy Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 635-641.
- S. Kolbe, F. Römer, T. Sieber, V. Tympel, and B. Voß, “Systematic analysis and mitigation of disturbances in beam current measurements using dual SQUID readout”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6044, this conference.
- F. Bosco et al., “Advanced studies for the dynamics of high brightness electron beams with the code MILES”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL190, pp. 3574-3577.
- A. Wrulich, “The Trieste Synchrotron Light Source ELETTRA”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 210-213.
- D. K. C. Chan, “Conceptual Design of a Superconducting High-Intensity Proton Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper WE204, pp. 580-586.
- J. R. Alonso, A. Chatterjee, and C. A. Tobias, “High Purity Radioactive Beams at the Bevalac”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3003-3006.
- A. Adelmann, P. Arbenz, C. Kraus, and M. Wittberger, “Comparison of h- and p- Refinement in a Finite Element Maxwell Time Domain Solver”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEA4IS04, pp. 288-288.
- C. L. Olson, “IFA Proof of Principle Experiments”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4231-4234.
- H. Dewa et al., “Pulsed Beam Current Monitor with a Toroidal Coil”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-64, pp. 854-856.
- Q. Yuan, M. Gu, G. Y. Jiang, and R. Wang, “The Feed-forward Control Design of Correction Coil Power Supply for SSRF EPU”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA032, pp. 2199-2201.
- Y.-C. Chao et al., “TRIUMF-VECC Electron Linac Beam Dynamics Optimization”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC012, pp. 277-280.
- V. A. Lebedev and A. L. Romanov, “Optical Stochastic Cooling at IOTA ring”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper WEWAUD03, pp. 123-127.
- S. G. Shasharina, J. R. Cary, M. A. Durant, S. E. Kruger, and S. A. Veitzer, “VizSchema - A Standard Approach for Visualization of Computational Accelerator Physics Data”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper WE2IOPK05, pp. 101-106.
- H. Araki, C. Carlos, C. Pira, E. Chyhyrynets, G. Rosaz, and M. Yamanaka, “RF measurement of plasma electrolytic polished 1.3 GHz full-seamless Nb/Cu cavities”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP42, unpublished.
- L. D. Hansborough, J. M. Potter, and N. G. Wilson, “Mechanical Design of RFQ Resonator Cavities in the 400-MHz Frequency Range”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper I03, pp. 329-331.
- A. Brinkmann, A. G?Âssel, W. D. M?Âller, M. Pekeler, and D. Proch, “Performance Degradation in Several TESLA 9-cell Cavities due to Weld Imperfections”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C05, pp. 452-456.
- M. Y. Huang, H. C. Liu, S. Wang, and S. Y. Xu, “Study on the Fixed Point Injection during the Beam Commissioning for CSNS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1017-1019.
- S. Kuzikov, “Simple Theory of Thermal Fatigue Caused by RF Pulse Heating”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP65, pp. 168-170.
- S. Roesler, M. Brugger, D. Forkel-Wirth, and J. Vollaire, “Studies of Induced Radioactivity and Residual Dose Rates around Beam Absorbers of Different Materials”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B01, pp. 448-452.
- H. Takei, K. Hirano, S. I. Meigo, and K. Tsutsumi, “Beam Extraction by the Laser Charge Exchange Method Using the 3-MeV LINACParc”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 435-439.
- P. Stoltz, C. Nieter, C. Roark, and J. D. A. Smith, “Benchmarking Multipacting Simulation for FEL Components”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB45, pp. 501-503.
- M. C. Bellachioma, M. Bender, H. Kollmus, A. Kr?ñmer, J. Kurdal, and H. Reich-Sprenger, “Thin Film Coating for the Upgrade of the Ion Synchrotron SIS18 at GSI”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP014, pp. 378-380.
- S. Yamin, R. W. A?ƒmann, and B. Marchetti, “Study for the Alignment of Focusing Solenoid of ARES RF Gun and Effect of Misalignment of Solenoid on Emittance of Space Charge Dominated Electron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 147-150.
- T. Sen, “Parametric X-rays at FAST”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1877-1880.
- E. Thrane et al., “Photoinjector Production of A Flat Electron Beam”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU404, pp. 308-310.
- V. Kiselev and V. Smaluk Budker Institute of Nuclear Physics, “A method for measurement of transverse impedance distribution along storage ring”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PT19, pp. XX-XX.
- S. Bai et al., “Machine Detector Interface for CEPC”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 217.
- K. Satou et al., “Development of a Beam Induced Heat-Flow Monitor for the Beam Dump of the J-PARC RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN047, pp. 4084-4086.
- T. J. Roberts and D. M. Kaplan, “Advanced Multi-program GUI for Accelerator Modeling”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC062, pp. 1868-1870.
- X. Y. Chang et al., “Study of Secondary Emission Enhanced Photoinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE042, pp. 2711-2713.
- A. Wu, “Investigation of Oxide Layer Structure on Niobium Surfaces Using a Secondary Ion Mass Spectrometer”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP08, pp. 251-253.
- M. Santana-Leitner, A. Ibrahimov, L. Y. Nicolas, S. H. Rokni, D. R. Walz, and J. J. Welch, “Beam Dumps of the New LCLS-II”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3973-3975.
- L. R. Williams et al., “Mobile CT-System for In-situ Inspection in the LHC at CERN”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB076, pp. 447-449.
- F. W. Jones, T. Planche, and Y.-N. Rao, “Tracking in a Cyclotron with Geant4”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WE4PB01, pp. 423-425.
- H. Kamitsubo et al., “A Proposed Multi-Purpose Separated-Sector Cyclotron at IPCR”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-07, pp. 2070-2073.
- S. Gayadeen, S. Duncan, and M. T. Heron, “Fast Orbit Feedback Control in Mode Space”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THMIB07, pp. 1082-1085.
- S. M. Meykopff, “Converting the Emittance Measurement MATLAB Tool Into a C++ Control System Server”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper MOPHA094, pp. XX-XX.
- G. Kruk and M. Peryt, “JDataViewer - Java-based Charting Library”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP093, pp. 856-858.
- A. Barry, B. Bowling, J. Kewisch, and J. Tang, “Orbit Correction Techniques for a Multipass Linac”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU450, pp. 444-446.
- C. Y. Wu et al., “RF Reference Distribution and Timing System for the Taiwan Photon Source”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD86, pp. 506-508.
- C. Crawford, A. Sery, V. Shiltsev, A. Aleksandrov, B. Skarbo, and B. Sukhina, “Magnetic Field Alignment in the Beam-Beam Compensation Device”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP152, pp. 3321-3323.
- Y. Jiao, X. Cui, X. Y. Huang, and G. Xu, “Suppression of the CSR-induced Emittance Growth in Achromats using Two-dimensional point-kick Analysis”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THC03, pp. 976-979.
- D. Zhu, R. T. Dowd, and Y. E. Tan, “Study of Material Choice in Beam Dumps for Energetic Electron Beams”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 721-723.
- M. Iwasaki et al., “Evaluation of the Detector BG for SuperKEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB019, pp. 1557-1559.
- J. A. Brandt, “A Review of Ultrasonic Additive Manufacturing for Particle Accelerator Applications”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 185.
- Y. Baconnier et al., “The CERN Linear Collider Test Facility”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH452, pp. 733-735.
- D. Ramos, “Modeling of the RF-shield Sliding Contact Fingers for the LHC Cryogenic Beam Vacuum Interconnects Using Implicit and Explicit Finite Element Formulations”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD035, pp. 1503-1505.
- T. Hayes, F. Severino, and K. S. Smith, “A Deterministic, Gigabit Serial Timing, Synchronization and Data Link for the RHIC LLRF”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP282, pp. 642-644.
- G. Hoffstaetter et al., “Progress Toward an ERL Extension to CESR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOOBAB02, pp. 107-109.
- T. Spickermann et al., “Comparison of Carbon Stripper Foils Under Operational Conditions at the Los Alamos Proton Storage Ring”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC02, pp. 262-264.
- R. Keller, R. Thomae, and J. Reijonen, “Evolution of the LEBT Layout for SNS”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOD19, pp. 253-255.
- M. Sawamura, E. Cenni, T. Furuya, H. Sakai, K. Umemori, and K. Shinoe, “HOM Properties of Main Linac for cERL in Japan”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG3003, pp. 87-90.
- S. Di Mitri, M. Cornacchia, S. V. Milton, and S. Spampinati, “Alternative Scheme of Bunch Length Compression in Linacs for Free Electron Lasers”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP033, pp. 1610-1612.
- J. G. Wang, “Tracking Stripped Proton Particles in SNS Ring Injection Momentum Dump Line”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP039, pp. 1567-1569.
- B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
- P. V. Verdier, “Re-Writing TANGO Code Generator Using openArchitectureWare Technology”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP080, pp. 827-829.
- J. Martin, “Beam Detector Impedance Calculation Using Circuit Models”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1127-1130.
- S. K?â, R. Andersson, E. Bargall?â, A. Nordt, and M. Rejzek, “Applying the Functional System Interaction Process at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 649-654.
- S. Kh. Egamediev, S. Khujaev, and A. I. Muminov, “Production of Carrier-Free Germanium-68 by Alpha-Particle Bombardment Zinc Cyclotron Target”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-19, pp. XX-XX.
- J. Haimson, B. Mecklenburg, G. Stowell, and E. L. Wright, “A Fully Demountable 550 kV Electron Gun for Low Emittance Beam Experiments with a 17 GHz Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3W029, pp. 2808-2810.
- M. F. Vorogushin, “NIIEFA Accelerators for Industry and Medicine”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRXCH01, pp. 167-171.
- M. Placidi, S. Di Mitri, C. Pellegrini, and G. Penn, “Compact FEL-Driven Inverse Compton Scattering Gamma-Ray Source”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 617-620.
- A. Azima et al., “Jitter Measurement by Spatial Electro-optical Sampling at the Flash Free Electron Laser”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH011, pp. 71-73.
- V. A. Moiseev and A. V. Feschenko, “Space Charge Effects in Bunch Shape Monitors”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC13, pp. 178-180.
- S. Ikeda, M. R. Costanzo, T. Kanesue, R. F. Lambiase, C. J. Liaw, and M. Okamura, “Control of Laser Ablation Plasma by Pulsed Magnetic Field for Heavy Ion Beam Production”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB28, pp. 259-261.
- Y. Iwashita, Y. Fuwa, M. Hino, T. Kubo, and T. Saeki, “Evaluation of Sc Property Coated on a Surface”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB062, pp. 723-725.
- J. Pforr et al., “Setup for Beam Profile Measurements using Optical Transition Radiation”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 494-497.
- T. Kii et al., “Reducing Back-Bombardment Effect Using Thermionic Cathode in IAE RF Gun”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS21, pp. XX-XX.
- K. Saito et al., “Development of 1.3 GHz Medium- Structure with High Gradient”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C15, pp. 534-539.
- J. P. Sikora and S. De Santis, “Electron Cloud Density Measurements Using Resonant Microwaves at CesrTA”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF21, pp. 592-596.
- M. Giovannozzi, A. Bazzani, G. Turchetti, and S. Rambaldi, “Diffusion Phenomena in Simple Hamiltonian Systems: Some Analytical and Numerical Results”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 273-276.
- V. G. Vaccaro et al., “Design, Construction and Low Power RF Tests of the First Module of the ACLIP Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP132, pp. 1836-1838.
- Y.-J. Chen et al., “Compact Proton Injector and First Accelerator System Test for Compact Proton Dielectric Wall Cancer Therapy Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP094, pp. 1516-1518.
- G. Perdikakis, D. Bazin, J. Browne, D. Leitner, L. Y. Lin, and W. Wittmer, “Instrumentation at the Low Intensity Frontier: Diagnostics for the Stopped and Reaccelerated Beams of NSCL and FRIB”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG038, pp. 113-115.
Back to search