Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Grech, F. Jafarinia, G. Geloni, M. Guetg, and T. Guest, “Virtual photon pulse characterisation using machine learning methods”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4468-4470. doi:10.18429/JACoW-IPAC2023-THPL020
[n] T. Petersen et al., “Nb3Sn Technology for Low-beta linacs”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 641-644. doi:10.18429/JACoW-LINAC2024-THPB006
[n] R. H. Bassel, “Research with AVF Cyclotrons in the USA”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-003, pp. XX-XX.
[n] P. K. Kankiya, J. P. Jamilkowski, and T. Samms, “Synchronized Ramping of Magnet Power Supplies for Streamlined Operation at Energy Recovery Linac (ERL) and Electron Lens (e-Lens)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 244-246. doi:10.18429/JACoW-ICALEPCS2015-MOPGF066
[n] A. Skuja, “The Status of CHEER”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2028-2031.
[n] A. Taghibi Khotbeh-Sara, F. Rahmani, F. Ghasemi, H. Khalafi, and M. Mohseni Kejani, “Nuclear and Mechanical Basic Design of Target for Mo-99 Production Using High Power Electron Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 148-150. doi:10.18429/JACoW-LINAC2018-MOPO069
[n] S. Persichelli et al., “Impedance and Collective Effects for the Advanced Light Source Upgrade at LBNL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3192-3195. doi:10.18429/JACoW-IPAC2017-WEPIK106
[n] S. Yamada et al., “Injector System of HIMAC”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH405, pp. 593-595.
[n] G. Mazzola et al., “Radiation to electronics studies for CERN gamma factory-proof of principle experiment in SPS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1202-1205. doi:10.18429/JACoW-IPAC2024-TUPC80
[n] F. Zimmermann et al., “Accelerator Physics Highlights in the 1997/98 SLC Run”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D034, pp. 474-476.
[n] A. Neumann et al., “Update on SRF Cavity Design, Production and Testing for BERLinPro”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB026, pp. 1127-1131.
[n] T. Hays, H. Padamsee, and R. W. R?Âth, “Determining HRFc for Nb and Nb3Sn through HPP and Transient Q Analysis”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C14, pp. 437-440.
[n] P. F. Ma et al., “Error Study of CPHS DTL after Assembly”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 763-766. doi:10.18429/JACoW-LINAC2018-THPO036
[n] W.-D. Klotz and R. Pordes, “The Grid”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper ROPA008, unpublished.
[n] G. Benedetti, D. Einfeld, E. Huttel, M. Munoz, and M. Pont, “Injection into the ALBA Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC068, pp. 2151-2153.
[n] C. Moore et al., “Dependence of the Emittances of the Fermilab Injectors on Intensity”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3000-3002.
[n] S.-A. Udongwo and U. van Rienen, “Multicell parameterisation for sensitivity analysis and uncertainty quantification of elliptical accelerator cavities”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1753-1756. doi:10.18429/JACoW-IPAC2025-WEPB015
[n] M. Won et al., “Design of Transmission Line at 28 GHz, 10 kW for ECR Ion Source in KBSI”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD042, pp. 1494-1496.
[n] Y. Piao, R. J. Dejus, M. F. Qian, I. Vasserman, and J. Z. Xu, “Magnetic Shims Studies for APS-U Hybrid Permanent Magnet Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3941-3944. doi:10.18429/JACoW-IPAC2021-THPAB077
[n] G. D??me, “The SPS Acceleration System Travelling Wave Drift-Tube Structure for the CERN SPS”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C06, pp. 138-147.
[n] G. Cuttone, “STATUS OF THE EXCYT PROJECT”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 21A6, pp. XX-XX.
[n] A. Ushakov, K. Floettmann, S. Riemann, and K. N. Sanosyan, “Radiation Levels and Activation at the ILC Positron Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS046, pp. 2478-2480.
[n] A. Halavanau, P. Piot, G. Ha, J. G. Power, E. E. Wisniewski, and G. Qiang, “A Simple Method for Measuring the Electron-Beam Magnetization”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 521-524. doi:10.18429/JACoW-NAPAC2016-TUPOB16
[n] R. J. Dejus, Y. Piao, M. F. Qian, J. M. TerHAAR, I. Vasserman, and J. Z. Xu, “Status of Insertion Device Tuning for the APS Upgrade”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3966-3969. doi:10.18429/JACoW-IPAC2021-THPAB085
[n] Y. Zhao, Y. He, S. Huang, L. Peng, and M. Yu, “RF design for a quadrupole resonator with a fundamental frequency of 325 MHz at IMP”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1741-1744. doi:10.18429/JACoW-IPAC2025-WEPB010
[n] A. A. Glazov et al., “Research of the Beam Orbit Expansion Effect”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B47, pp. 181-183.
[n] Y.-S. Cheng et al., “Waveform and Spectrum Acquisition for the TLS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB017, pp. 2722-2724.
[n] E. Bargall??, K. H. Andersen, R. Andersson, A. De Isusi, A. Nordt, and E. J. Pitcher, “ESS Availability and Reliability Approach”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1033-1035. doi:10.18429/JACoW-IPAC2015-MOPTY045
[n] Y. Hidaka, O. V. Chubar, C. A. Kit?®gi, and T. Tanabe, “Commissioning of Current Strips for Elliptically Polarizing Undulators at NSLS-II”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4160-4163. doi:10.18429/JACoW-IPAC2021-THPAB198
[n] J. H. Hottenbacher et al., “The SIS100 Extraction and Emergency Kicker Magnet System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4115-4118. doi:10.18429/JACoW-IPAC2021-THPAB178
[n] K. Kan, M. Gohdo, J. Yang, and Y. Yoshida, “Study on Laser Modulator for Electron Beam Density Modulation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4241-4243. doi:10.18429/JACoW-IPAC2021-THPAB228
[n] P. Pizzol, J. W. Lewellen, E. R. Olivas, E. I. Simakov, and T. Tajima, “Design, Construction and Tests of the Cooling System with a Cryocooler for Cavity Testing”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4056-4058. doi:10.18429/JACoW-IPAC2021-THPAB153
[n] A. Bernhard et al., “Magnetic design of the cSTART magnets”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1788-1791. doi:10.18429/JACoW-IPAC2025-WEPB026
[n] C. Tennant et al., “CEBAF-ER: Extending the Frontier of Energy Recovery at Jefferson Lab”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUO08, pp. 249-253.
[n] Y. Hidaka, D. A. Hidas, F. Plassard, T. V. Shaftan, and G. M. Wang, “Enhancing Efficiency of Multi-Objective Neural-Network-Assisted Nonlinear Dynamics Lattice Optimization via 1-D Aperture Objectives & Objective Focusing”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4156-4159. doi:10.18429/JACoW-IPAC2021-THPAB197
[n] A. H. Regan, D. Brittain, D. E. Rees, and C. D. Ziomek, “RF System Description for the Ground Test Accelerator Radio-Frequency Quadrupole”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-27, pp. 680-682.
[n] K. Chida, I. Katayama, S. Ono, Y. Tanabe, T. Watanabe, and M. Yoshizawa, “A Cryogenic Current Measuring Device for the Low-Intensity Beam at the Storage Ring TARN II”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP20F, pp. 1610-1612.
[n] D. Banerjee et al., “M2 Experimental Beamline Optics Studies for Next Generation Muon Beam Experiments at CERN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4041-4044. doi:10.18429/JACoW-IPAC2021-THPAB143
[n] A. Lombardi et al., “Compact hadron sources and linacs for societal applications”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 909-914. doi:10.18429/JACoW-IPAC2025-TUZN2
[n] W. Li, P. Liu, Y. K. Wu, and J. Yan, “Design Study on Beam Size Measurement System Using SR Interferometry for Low Beam Current”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3949-3952. doi:10.18429/JACoW-IPAC2021-THPAB079
[n] R. Lill, “Advanced Photon Source Low-Energy Undulator Test Line Bunch Compressor Beam Position Monitor System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH057, pp. 1351-1353.
[n] Y. Zou and M. Olveg?Ñrd, “Studies on Beam Collimation System for the ESSnuSB Accumulator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4107-4110. doi:10.18429/JACoW-IPAC2021-THPAB176
[n] H. Hoteit et al., “Advancements in magnet power supply systems at KARA: enhancing stability, efficiency, and operational capabilities”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1726-1729. doi:10.18429/JACoW-IPAC2025-WEPB002
[n] R. Valizadeh et al., “Optimization of deposition parameters of Nb3Sn thin film on copper with and without buffer layer”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB069, unpublished.
[n] S. Simon, C. Benjamin, J. Bradley, and R. Valizadeh, “Impact of ion and neutral angular distribution on thin film deposition in HiPIMS and bipolar HiPIMS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB073, unpublished.
[n] R. Panas et al., “The impact of insertion devices on Solaris storage ring optics”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1855-1857. doi:10.18429/JACoW-IPAC2025-WEPB052
[n] X. Guo, Y. Gao, C. Han, F. Long, and P. Wei, “HEPS Magnet power supply with magnetization and demagnetization functions”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB001, unpublished.
[n] Q. Gu and Z. Wang, “Longitudinal Phase Space Study on Injector Beam of High Repetition Rate X-Ray FEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 584-587. doi:10.18429/JACoW-FEL2019-THB04
[n] J. Marcos, A. Fontanet, J. R. García, and R. Monge, “Insertion devices for the ultralow emittance storage ring ALBA II”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1839-1842. doi:10.18429/JACoW-IPAC2025-WEPB047
[n] V. A. Semin et al., “DC-280 Cyclotron for Factory of Super Heavy Elements, Experimental Results”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4126-4129. doi:10.18429/JACoW-IPAC2021-THPAB182
[n] A. S. Setty, D. Jousse, J.-L. Pastre, and E. Weihreter, “Beam Dynamics of the 50 MeV Preinjector for the Berlin Synchrotron BESSY II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA009, pp. 2490-2492.
[n] S. Samsam, R. Paparella, M. Rossetti Conti, L. Serafini, and D. Sertore, “Elevating beam quality and stability in linear accelerators through high order mode analysis”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 850-854. doi:10.18429/JACoW-IPAC2025-TUXN1
[n] E. Vogel et al., “Status of the European XFEL 3.9 GHz system”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB020, pp. 519-521.
[n] J. J. Dang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and S. Lee, “Fundamental Study on Electromagnetic Characteristics of Half-Wave Resonator for 200 MeV Energy Upgrade of KOMAC Proton Linac”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4098-4100. doi:10.18429/JACoW-IPAC2021-THPAB173
[n] S. Bira, L. Ferreira, G. Rosaz, and A.-M. Valente-Feliciano, “Characterization and modeling of electropolishing for copper cavities in superconducting applications”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB074, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Grech, F. Jafarinia, G. Geloni, M. Guetg, and T. Guest, “Virtual photon pulse characterisation using machine learning methods”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL020, pp. 4468-4470.
- T. Petersen et al., “Nb3Sn Technology for Low-beta linacs”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 641-644.
- R. H. Bassel, “Research with AVF Cyclotrons in the USA”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-003, pp. XX-XX.
- P. K. Kankiya, J. P. Jamilkowski, and T. Samms, “Synchronized Ramping of Magnet Power Supplies for Streamlined Operation at Energy Recovery Linac (ERL) and Electron Lens (e-Lens)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 244-246.
- A. Skuja, “The Status of CHEER”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2028-2031.
- A. Taghibi Khotbeh-Sara, F. Rahmani, F. Ghasemi, H. Khalafi, and M. Mohseni Kejani, “Nuclear and Mechanical Basic Design of Target for Mo-99 Production Using High Power Electron Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 148-150.
- S. Persichelli et al., “Impedance and Collective Effects for the Advanced Light Source Upgrade at LBNL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3192-3195.
- S. Yamada et al., “Injector System of HIMAC”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH405, pp. 593-595.
- G. Mazzola et al., “Radiation to electronics studies for CERN gamma factory-proof of principle experiment in SPS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC80, pp. 1202-1205.
- F. Zimmermann et al., “Accelerator Physics Highlights in the 1997/98 SLC Run”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D034, pp. 474-476.
- A. Neumann et al., “Update on SRF Cavity Design, Production and Testing for BERLinPro”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB026, pp. 1127-1131.
- T. Hays, H. Padamsee, and R. W. R?Âth, “Determining HRFc for Nb and Nb3Sn through HPP and Transient Q Analysis”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C14, pp. 437-440.
- P. F. Ma et al., “Error Study of CPHS DTL after Assembly”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 763-766.
- W.-D. Klotz and R. Pordes, “The Grid”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPA008, unpublished.
- G. Benedetti, D. Einfeld, E. Huttel, M. Munoz, and M. Pont, “Injection into the ALBA Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC068, pp. 2151-2153.
- C. Moore et al., “Dependence of the Emittances of the Fermilab Injectors on Intensity”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3000-3002.
- S.-A. Udongwo and U. van Rienen, “Multicell parameterisation for sensitivity analysis and uncertainty quantification of elliptical accelerator cavities”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB015, pp. 1753-1756.
- M. Won et al., “Design of Transmission Line at 28 GHz, 10 kW for ECR Ion Source in KBSI”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD042, pp. 1494-1496.
- Y. Piao, R. J. Dejus, M. F. Qian, I. Vasserman, and J. Z. Xu, “Magnetic Shims Studies for APS-U Hybrid Permanent Magnet Undulators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3941-3944.
- G. D??me, “The SPS Acceleration System Travelling Wave Drift-Tube Structure for the CERN SPS”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper C06, pp. 138-147.
- G. Cuttone, “STATUS OF THE EXCYT PROJECT”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 21A6, pp. XX-XX.
- A. Ushakov, K. Floettmann, S. Riemann, and K. N. Sanosyan, “Radiation Levels and Activation at the ILC Positron Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS046, pp. 2478-2480.
- A. Halavanau, P. Piot, G. Ha, J. G. Power, E. E. Wisniewski, and G. Qiang, “A Simple Method for Measuring the Electron-Beam Magnetization”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 521-524.
- R. J. Dejus, Y. Piao, M. F. Qian, J. M. TerHAAR, I. Vasserman, and J. Z. Xu, “Status of Insertion Device Tuning for the APS Upgrade”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3966-3969.
- Y. Zhao, Y. He, S. Huang, L. Peng, and M. Yu, “RF design for a quadrupole resonator with a fundamental frequency of 325 MHz at IMP”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB010, pp. 1741-1744.
- A. A. Glazov et al., “Research of the Beam Orbit Expansion Effect”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B47, pp. 181-183.
- Y.-S. Cheng et al., “Waveform and Spectrum Acquisition for the TLS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB017, pp. 2722-2724.
- E. Bargall??, K. H. Andersen, R. Andersson, A. De Isusi, A. Nordt, and E. J. Pitcher, “ESS Availability and Reliability Approach”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1033-1035.
- Y. Hidaka, O. V. Chubar, C. A. Kit?®gi, and T. Tanabe, “Commissioning of Current Strips for Elliptically Polarizing Undulators at NSLS-II”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4160-4163.
- J. H. Hottenbacher et al., “The SIS100 Extraction and Emergency Kicker Magnet System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4115-4118.
- K. Kan, M. Gohdo, J. Yang, and Y. Yoshida, “Study on Laser Modulator for Electron Beam Density Modulation”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4241-4243.
- P. Pizzol, J. W. Lewellen, E. R. Olivas, E. I. Simakov, and T. Tajima, “Design, Construction and Tests of the Cooling System with a Cryocooler for Cavity Testing”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4056-4058.
- A. Bernhard et al., “Magnetic design of the cSTART magnets”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB026, pp. 1788-1791.
- C. Tennant et al., “CEBAF-ER: Extending the Frontier of Energy Recovery at Jefferson Lab”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUO08, pp. 249-253.
- Y. Hidaka, D. A. Hidas, F. Plassard, T. V. Shaftan, and G. M. Wang, “Enhancing Efficiency of Multi-Objective Neural-Network-Assisted Nonlinear Dynamics Lattice Optimization via 1-D Aperture Objectives & Objective Focusing”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4156-4159.
- A. H. Regan, D. Brittain, D. E. Rees, and C. D. Ziomek, “RF System Description for the Ground Test Accelerator Radio-Frequency Quadrupole”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-27, pp. 680-682.
- K. Chida, I. Katayama, S. Ono, Y. Tanabe, T. Watanabe, and M. Yoshizawa, “A Cryogenic Current Measuring Device for the Low-Intensity Beam at the Storage Ring TARN II”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP20F, pp. 1610-1612.
- D. Banerjee et al., “M2 Experimental Beamline Optics Studies for Next Generation Muon Beam Experiments at CERN”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4041-4044.
- A. Lombardi et al., “Compact hadron sources and linacs for societal applications”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUZN2, pp. 909-914.
- W. Li, P. Liu, Y. K. Wu, and J. Yan, “Design Study on Beam Size Measurement System Using SR Interferometry for Low Beam Current”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3949-3952.
- R. Lill, “Advanced Photon Source Low-Energy Undulator Test Line Bunch Compressor Beam Position Monitor System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH057, pp. 1351-1353.
- Y. Zou and M. Olveg?Ñrd, “Studies on Beam Collimation System for the ESSnuSB Accumulator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4107-4110.
- H. Hoteit et al., “Advancements in magnet power supply systems at KARA: enhancing stability, efficiency, and operational capabilities”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB002, pp. 1726-1729.
- R. Valizadeh et al., “Optimization of deposition parameters of Nb3Sn thin film on copper with and without buffer layer”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB069, unpublished.
- S. Simon, C. Benjamin, J. Bradley, and R. Valizadeh, “Impact of ion and neutral angular distribution on thin film deposition in HiPIMS and bipolar HiPIMS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB073, unpublished.
- R. Panas et al., “The impact of insertion devices on Solaris storage ring optics”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB052, pp. 1855-1857.
- X. Guo, Y. Gao, C. Han, F. Long, and P. Wei, “HEPS Magnet power supply with magnetization and demagnetization functions”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB001, unpublished.
- Q. Gu and Z. Wang, “Longitudinal Phase Space Study on Injector Beam of High Repetition Rate X-Ray FEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 584-587.
- J. Marcos, A. Fontanet, J. R. García, and R. Monge, “Insertion devices for the ultralow emittance storage ring ALBA II”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB047, pp. 1839-1842.
- V. A. Semin et al., “DC-280 Cyclotron for Factory of Super Heavy Elements, Experimental Results”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4126-4129.
- A. S. Setty, D. Jousse, J.-L. Pastre, and E. Weihreter, “Beam Dynamics of the 50 MeV Preinjector for the Berlin Synchrotron BESSY II”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA009, pp. 2490-2492.
- S. Samsam, R. Paparella, M. Rossetti Conti, L. Serafini, and D. Sertore, “Elevating beam quality and stability in linear accelerators through high order mode analysis”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUXN1, pp. 850-854.
- E. Vogel et al., “Status of the European XFEL 3.9 GHz system”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB020, pp. 519-521.
- J. J. Dang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and S. Lee, “Fundamental Study on Electromagnetic Characteristics of Half-Wave Resonator for 200 MeV Energy Upgrade of KOMAC Proton Linac”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4098-4100.
- S. Bira, L. Ferreira, G. Rosaz, and A.-M. Valente-Feliciano, “Characterization and modeling of electropolishing for copper cavities in superconducting applications”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB074, unpublished.
Back to search