Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. R. Kozak and O. V. Belikov, “Controller of Power Supplies for Corrector Magnets of European XFEL”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 715-717. doi:10.18429/JACoW-RUPAC2016-THPSC078
[n] C. J. Gardner et al., “Status and Recent Performance of the Accelerators that Serve as Gold Injector for RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH045, pp. 3326-3328.
[n] K. Wootton and X. Shi, “Measurements of ultralow emittance and transverse coherence at the Advanced Photon Source Upgrade storage ring”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 658-664. doi:10.18429/JACoW-NAPAC2025-WEYN03
[n] N. Yamamoto et al., “Study of the Coherent Terahertz Radiation by Laser Bunch Slicing at UVSOR-II Electron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA037, pp. 2570-2572.
[n] B. Y. Bogdanovich and A. V. Shalnov, “Linacs with Self-Acceleration of Bunched Beam”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 473-475.
[n] M. K. Craddock et al., “Recent Developments on the TRIUMF KAON Factory Proposal”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 320-323.
[n] Q. Wu, I. Ben-Zvi, X. Chang, and J. Skarita, “Simulations for Preliminary Design of a Multi-Cathode DC Electron Gun for eRHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB035, pp. 1599-1601.
[n] A. E. Vlieks et al., “Development of An X-Band Photoinjector at SLAC”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO453, pp. 163-165.
[n] J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
[n] H. Fukuma et al., “Beam-based Measurement of Strength Errors in Quadrupole Magnets with Orbit Bumps”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP061L, pp. 956-958.
[n] J. Bojowald et al., “Diagnostic Tools for the COSY-Juelich Synchrotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1515-1518.
[n] A. M. Fialkovsky, P. O. Klinovsky, K. V. Kotenko, V. P. Malyshev, and T. R. Virkunen, “Integrated Inspection Method of Motor Transports Based on Acceleration Technology”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 692-694. doi:10.18429/JACoW-RUPAC2016-THPSC068
[n] S. Okuda, T. Kojima, R. Taniguchi, and Y. Tanaka, “Low-Intensity Electron Beam Monitoring and Beam Applications at OPU Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP018, pp. 286-288.
[n] H. J. Kim and T. Sen, “Electron Lens in RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD066, pp. 2075-2077.
[n] G. Stupakov, S. Kladov, Z. Huang, and Y.-K. Kim, “Simulations of IBS through electric field fluctuations”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 668-672. doi:10.18429/JACoW-NAPAC2025-WECD01
[n] M. P. Bourgarel, L. Bex, P. Di Bernardo, and E. Plawski, “GANIL Axial Injection Design with an ECR Ion Source”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B40, pp. 161-164.
[n] F. G. Resmini and A. Salomone, “Center Region Studies for Axial Injection in the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B38, pp. 154-157.
[n] J. C. Bourdon et al., “CLIO: Free Electron Laser in ORSAY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 314-317.
[n] P. Schmueser, “Properties and Practical Performance of SC Magnets in Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 284-289.
[n] M. Kuchnir and P. Sanger, “Thermal Conductance Measurements of Mechanical Supports for Superconducting Magnets”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1183-1185.
[n] N. A. Huque, E. Daly, and T. Wijeratne, “Upgrades to Cryogenic Capabilities for Cryomodule Testing at JLab”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 983-987. doi:10.18429/JACoW-SRF2019-THP051
[n] P. Forck et al., “ARIES-ADA: An R&D Network for Advanced Diagnostics at Accelerators”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 71-74. doi:10.18429/JACoW-IBIC2018-MOPB02
[n] A. Freyberger, “Commissioning and Operation of 12 GeV CEBAF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. XX-XX. doi:10.18429/JACoW-IPAC2015-MOXGB2
[n] H. Wang, Y. Feng, S. Forcat Oller, J. Krzywinski, E. Ortiz, and M. Rowen, “The Design of LCLS-II Photon Beam Containment System”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 133-135. doi:10.18429/JACoW-MEDSI2018-TUPH39
[n] M. Ferianis, M. Bossi, and T. Monaci, “Destructive Beam Diagnostics at ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1500-1503.
[n] S. U. De Silva, “Overview of SRF Deflecting and Crabbing Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1192-1198. doi:10.18429/JACoW-SRF2019-FRCAA1
[n] E. Thoeng et al., “Progress of TRIUMF Beta-SRF Facility for Novel SRF Materials”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 964-967. doi:10.18429/JACoW-SRF2019-THP047
[n] S. Lauber et al., “Reconstruction of the Longitudinal Phase Space for the Superconducting CW HELIAC”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1173-1177. doi:10.18429/JACoW-SRF2019-THP103
[n] Y. Petenev, T. Atkinson, A. V. Bondarenko, and A. N. Matveenko, “Feasibility Study of an ERL-based GeV-scale Multi-turn Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP016, pp. 604-606.
[n] R. Perin, “Review of R & D Towards High-field Accelerator Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 289-294.
[n] K. Kan et al., “Measurement of Temporal Electric Field of Electron Bunch using Photoconductive Antenna”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1623-1625. doi:10.18429/JACoW-IPAC2015-TUPJE007
[n] C. J. Herrlander, K.-G. Rensfelt, and J. Starker, “CRYRING - A Heavy-Ion Storage and Synchrotron Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 350-353.
[n] J. I. M. Botman et al., “Initial Design of a phi Factory”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 311-314.
[n] V. M. Biryukov, A. I. Drozhdin, and N. V. Mokhov, “On Possible Use of Bent Crystal to Improve Tevatron Beam Scraping”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA65, pp. 1234-1236.
[n] M. Blank et al., “Experimental Demonstration of High Power Millimeter Wave Gyro-Amplifers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP151, pp. 1016-1018.
[n] Y. Ding, K. L. F. Bane, and Y. M. Nosochkov, “Beam Shaping for High-Repetition-Rate X-Ray FELs”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 661-664. doi:10.18429/JACoW-FEL2019-THP035
[n] M. Khojoyan, A. Cauchois, J. Prudent, and A. Specka, “Design of a Compact Permanent Magnet Spectrometer for CILEX/APOLLON”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 61-65. doi:10.18429/JACoW-IBIC2018-MOPA16
[n] A. N. Matveenko, O. A. Shevchenko, and N. A. Vinokurov, “ISOCHRONOUS BEND FOR HIGH GAIN RING FEL”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUDP02, pp. XX-XX.
[n] G. Tosin et al., “Design of Magnet Prototypes for the new Brazilian Synchrotron Light Source - SIRIUS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD003, pp. 3084-3086.
[n] B. L. Militsyn et al., “First Results from III-V Photocathode Preparation Facility for the ALICE ERL Photoinjector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE095, pp. 2347-2349.
[n] M. Apollonio, A. P. Blondel, and D. J. Kelliher, “Muon Polarimeter in a Neutrino Factory Decay Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE053, pp. 3464-3466.
[n] A. Valentinov, L. Ioudin, I. Krylov, V. Rezvov, and I. Yupinov, “LOCAL FEEDBACK SYSTEM TO CORRECT SYNCHROTRON RADIATION BEAM POSITION AT SIBERIA-2 STORAGE RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUDP08, pp. XX-XX.
[n] K. A. Dewhurst et al., “Design of the Cockcroft Beamline: Adjustable Transport of Laser Wakefield Electrons to an Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3749-3752. doi:10.18429/JACoW-IPAC2019-THPGW070
[n] M. E. Nordby, N. Kurita, and C.-K. Ng, “Bellows Design for the PEP-II High Energy Ring Arc Chambers”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP07, pp. 2048-2050.
[n] R. A. Marsh, G. G. Anderson, C. P. J. Barty, D. J. Gibson, and Y. Hwang, “LLNL X-band RF Gun Results”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3993-3995. doi:10.18429/JACoW-IPAC2016-THPOW026
[n] N. A. Tahir, V. E. Fortov, I. Lomonosov, R. Piriz, R. Schmidt, and A. Shutov, “Simulations of the Full Impact of the LHC Beam on Solid Copper and Graphite Targets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA022, pp. 1375-1377.
[n] L. O. Dallin, “Failure Mode Analysis in Preparation for Top-up Injection at the Canadian Light Source (CLS)”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP053, pp. 682-684.
[n] M. Bellato, A. Dainelli, and M. Poggie, “commissioning and Developments of the ALPI Diagnostics System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1512-1515.
[n] G. Mavrogenes, J. Norem, and J. Simpson, “A Pulse Compression System for the ANL 20 MeV Linac”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-1, pp. 429-430.
[n] Yu. M. Arkatov et al., “THE ÔÇ£SALOÔÇØ PROJECT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUAO04, pp. XX-XX.
[n] M. Otani et al., “Disk and Washer Coupled Cavity Linac Design and Cold-Model for Muon Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1924-1927. doi:10.18429/JACoW-IPAC2019-TUPRB117
[n] M. J. Easton, M. Aslaninejad, S. Jolly, and J. K. Pozimski, “RFQ Design Optimisation for PAMELA Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP066, pp. 4926-4928.
[n] D. Horan and G. J. Waldschmidt, “Performance of the 352-MHz 4-kW CW Solid State RF Power Amplifier System using 1-kW Push-pull Devices”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP123, pp. 1059-1061.
[n] K. Ohmi and H. Koiso, “Dynamic Aperture Limit caused by IR Nonlinearity in Extremely Low-beta B Factories”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB015, pp. 1548-1550.
[n] M. M. El-Ashmawy and G. D'Auria, “ABCI-based Analytical Model for Calculating the Transverse Kick Factor in Axi-symmetric Step-out Transition”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD035, pp. 2006-2008.
[n] M. Labat, M. El Ajjouri, N. Hubert, D. Pedeau, M. Ribbens, and M.-A. Tordeux, “AXD Measurements at SOLEIL”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 209-212. doi:10.18429/JACoW-IBIC2016-MOPG61
[n] F. W. Jones, “A Graphical User Interface for RELAX3D”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P098, pp. 2600-2602.
[n] S. Valeri et al., “Spectroscopic Investigation of in situ Prepared Mulialkali-Based Photocathodesvaleri”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1459-1462.
[n] W. Singer, “Progress With Large Grain Cavities & Seamless Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOAAU04, pp. 466-466.
[n] O. A. Shevchenko, A. V. Kuzmin, and N. A. Vinokurov, “NUMERICAL MODELING OF THE NOVOSIBIRSK TERAHERTZ FEL AND COMPARISON WITH EXPERIMENTAL RESULTS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUDP06, pp. XX-XX.
[n] M. Fujieda et al., “A New Type of RF Cavity For High Intensity Proton Synchrotron Using High Permeability Magnetic Alloy”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOB03B, pp. 299-301.
[n] J. C. McNeur et al., “A Tapered Dielectric Structure for Laser Acceleration at Low Energy”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD047, pp. 4387-4389.
[n] E. W. Hoffman et al., “High Intensity Beam Profile Monitors for the LAMPF Primary Beam Lines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3420-3423.
[n] I. B. Enchevich, M. J. Barnes, and R. L. Poirier, “Analysis of Eddy Currents in the Walls of the Ferrite Tuned rf Cavity for the TRIUMF Kaon Factory Booster Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 699-702.
For LaTeX
Use Complete Form
For BibTeX
References
- V. R. Kozak and O. V. Belikov, “Controller of Power Supplies for Corrector Magnets of European XFEL”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 715-717.
- C. J. Gardner et al., “Status and Recent Performance of the Accelerators that Serve as Gold Injector for RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH045, pp. 3326-3328.
- K. Wootton and X. Shi, “Measurements of ultralow emittance and transverse coherence at the Advanced Photon Source Upgrade storage ring”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 658-664.
- N. Yamamoto et al., “Study of the Coherent Terahertz Radiation by Laser Bunch Slicing at UVSOR-II Electron Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA037, pp. 2570-2572.
- B. Y. Bogdanovich and A. V. Shalnov, “Linacs with Self-Acceleration of Bunched Beam”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 473-475.
- M. K. Craddock et al., “Recent Developments on the TRIUMF KAON Factory Proposal”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 320-323.
- Q. Wu, I. Ben-Zvi, X. Chang, and J. Skarita, “Simulations for Preliminary Design of a Multi-Cathode DC Electron Gun for eRHIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB035, pp. 1599-1601.
- A. E. Vlieks et al., “Development of An X-Band Photoinjector at SLAC”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO453, pp. 163-165.
- J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
- H. Fukuma et al., “Beam-based Measurement of Strength Errors in Quadrupole Magnets with Orbit Bumps”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP061L, pp. 956-958.
- J. Bojowald et al., “Diagnostic Tools for the COSY-Juelich Synchrotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1515-1518.
- A. M. Fialkovsky, P. O. Klinovsky, K. V. Kotenko, V. P. Malyshev, and T. R. Virkunen, “Integrated Inspection Method of Motor Transports Based on Acceleration Technology”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 692-694.
- S. Okuda, T. Kojima, R. Taniguchi, and Y. Tanaka, “Low-Intensity Electron Beam Monitoring and Beam Applications at OPU Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP018, pp. 286-288.
- H. J. Kim and T. Sen, “Electron Lens in RHIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD066, pp. 2075-2077.
- G. Stupakov, S. Kladov, Z. Huang, and Y.-K. Kim, “Simulations of IBS through electric field fluctuations”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 668-672.
- M. P. Bourgarel, L. Bex, P. Di Bernardo, and E. Plawski, “GANIL Axial Injection Design with an ECR Ion Source”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B40, pp. 161-164.
- F. G. Resmini and A. Salomone, “Center Region Studies for Axial Injection in the Milan Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B38, pp. 154-157.
- J. C. Bourdon et al., “CLIO: Free Electron Laser in ORSAY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 314-317.
- P. Schmueser, “Properties and Practical Performance of SC Magnets in Accelerators”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 284-289.
- M. Kuchnir and P. Sanger, “Thermal Conductance Measurements of Mechanical Supports for Superconducting Magnets”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1183-1185.
- N. A. Huque, E. Daly, and T. Wijeratne, “Upgrades to Cryogenic Capabilities for Cryomodule Testing at JLab”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 983-987.
- P. Forck et al., “ARIES-ADA: An R&D Network for Advanced Diagnostics at Accelerators”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 71-74.
- A. Freyberger, “Commissioning and Operation of 12 GeV CEBAF”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. XX-XX.
- H. Wang, Y. Feng, S. Forcat Oller, J. Krzywinski, E. Ortiz, and M. Rowen, “The Design of LCLS-II Photon Beam Containment System”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 133-135.
- M. Ferianis, M. Bossi, and T. Monaci, “Destructive Beam Diagnostics at ELETTRA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1500-1503.
- S. U. De Silva, “Overview of SRF Deflecting and Crabbing Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1192-1198.
- E. Thoeng et al., “Progress of TRIUMF Beta-SRF Facility for Novel SRF Materials”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 964-967.
- S. Lauber et al., “Reconstruction of the Longitudinal Phase Space for the Superconducting CW HELIAC”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1173-1177.
- Y. Petenev, T. Atkinson, A. V. Bondarenko, and A. N. Matveenko, “Feasibility Study of an ERL-based GeV-scale Multi-turn Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP016, pp. 604-606.
- R. Perin, “Review of R & D Towards High-field Accelerator Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 289-294.
- K. Kan et al., “Measurement of Temporal Electric Field of Electron Bunch using Photoconductive Antenna”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1623-1625.
- C. J. Herrlander, K.-G. Rensfelt, and J. Starker, “CRYRING - A Heavy-Ion Storage and Synchrotron Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 350-353.
- J. I. M. Botman et al., “Initial Design of a phi Factory”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 311-314.
- V. M. Biryukov, A. I. Drozhdin, and N. V. Mokhov, “On Possible Use of Bent Crystal to Improve Tevatron Beam Scraping”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA65, pp. 1234-1236.
- M. Blank et al., “Experimental Demonstration of High Power Millimeter Wave Gyro-Amplifers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP151, pp. 1016-1018.
- Y. Ding, K. L. F. Bane, and Y. M. Nosochkov, “Beam Shaping for High-Repetition-Rate X-Ray FELs”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 661-664.
- M. Khojoyan, A. Cauchois, J. Prudent, and A. Specka, “Design of a Compact Permanent Magnet Spectrometer for CILEX/APOLLON”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 61-65.
- A. N. Matveenko, O. A. Shevchenko, and N. A. Vinokurov, “ISOCHRONOUS BEND FOR HIGH GAIN RING FEL”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUDP02, pp. XX-XX.
- G. Tosin et al., “Design of Magnet Prototypes for the new Brazilian Synchrotron Light Source - SIRIUS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD003, pp. 3084-3086.
- B. L. Militsyn et al., “First Results from III-V Photocathode Preparation Facility for the ALICE ERL Photoinjector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE095, pp. 2347-2349.
- M. Apollonio, A. P. Blondel, and D. J. Kelliher, “Muon Polarimeter in a Neutrino Factory Decay Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE053, pp. 3464-3466.
- A. Valentinov, L. Ioudin, I. Krylov, V. Rezvov, and I. Yupinov, “LOCAL FEEDBACK SYSTEM TO CORRECT SYNCHROTRON RADIATION BEAM POSITION AT SIBERIA-2 STORAGE RING”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUDP08, pp. XX-XX.
- K. A. Dewhurst et al., “Design of the Cockcroft Beamline: Adjustable Transport of Laser Wakefield Electrons to an Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3749-3752.
- M. E. Nordby, N. Kurita, and C.-K. Ng, “Bellows Design for the PEP-II High Energy Ring Arc Chambers”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP07, pp. 2048-2050.
- R. A. Marsh, G. G. Anderson, C. P. J. Barty, D. J. Gibson, and Y. Hwang, “LLNL X-band RF Gun Results”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3993-3995.
- N. A. Tahir, V. E. Fortov, I. Lomonosov, R. Piriz, R. Schmidt, and A. Shutov, “Simulations of the Full Impact of the LHC Beam on Solid Copper and Graphite Targets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA022, pp. 1375-1377.
- L. O. Dallin, “Failure Mode Analysis in Preparation for Top-up Injection at the Canadian Light Source (CLS)”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP053, pp. 682-684.
- M. Bellato, A. Dainelli, and M. Poggie, “commissioning and Developments of the ALPI Diagnostics System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1512-1515.
- G. Mavrogenes, J. Norem, and J. Simpson, “A Pulse Compression System for the ANL 20 MeV Linac”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-1, pp. 429-430.
- Yu. M. Arkatov et al., “THE ÔÇ£SALOÔÇØ PROJECT”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUAO04, pp. XX-XX.
- M. Otani et al., “Disk and Washer Coupled Cavity Linac Design and Cold-Model for Muon Linac”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1924-1927.
- M. J. Easton, M. Aslaninejad, S. Jolly, and J. K. Pozimski, “RFQ Design Optimisation for PAMELA Injector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP066, pp. 4926-4928.
- D. Horan and G. J. Waldschmidt, “Performance of the 352-MHz 4-kW CW Solid State RF Power Amplifier System using 1-kW Push-pull Devices”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP123, pp. 1059-1061.
- K. Ohmi and H. Koiso, “Dynamic Aperture Limit caused by IR Nonlinearity in Extremely Low-beta B Factories”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB015, pp. 1548-1550.
- M. M. El-Ashmawy and G. D'Auria, “ABCI-based Analytical Model for Calculating the Transverse Kick Factor in Axi-symmetric Step-out Transition”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD035, pp. 2006-2008.
- M. Labat, M. El Ajjouri, N. Hubert, D. Pedeau, M. Ribbens, and M.-A. Tordeux, “AXD Measurements at SOLEIL”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 209-212.
- F. W. Jones, “A Graphical User Interface for RELAX3D”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P098, pp. 2600-2602.
- S. Valeri et al., “Spectroscopic Investigation of in situ Prepared Mulialkali-Based Photocathodesvaleri”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1459-1462.
- W. Singer, “Progress With Large Grain Cavities & Seamless Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THOAAU04, pp. 466-466.
- O. A. Shevchenko, A. V. Kuzmin, and N. A. Vinokurov, “NUMERICAL MODELING OF THE NOVOSIBIRSK TERAHERTZ FEL AND COMPARISON WITH EXPERIMENTAL RESULTS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUDP06, pp. XX-XX.
- M. Fujieda et al., “A New Type of RF Cavity For High Intensity Proton Synchrotron Using High Permeability Magnetic Alloy”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOB03B, pp. 299-301.
- J. C. McNeur et al., “A Tapered Dielectric Structure for Laser Acceleration at Low Energy”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD047, pp. 4387-4389.
- E. W. Hoffman et al., “High Intensity Beam Profile Monitors for the LAMPF Primary Beam Lines”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3420-3423.
- I. B. Enchevich, M. J. Barnes, and R. L. Poirier, “Analysis of Eddy Currents in the Walls of the Ferrite Tuned rf Cavity for the TRIUMF Kaon Factory Booster Synchrotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 699-702.
Back to search