Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Zhang, I. Marneris, and J. Sandberg, “Large Scale Distributed Parameter Model of Main Magnet System and Frequency Decomposition Analysis”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS104, pp. 670-672.
[n] J. Qiang, Y. Hao, Y. Luo, C. Montag, F. J. Willeke, and D. Xu, “Strong-Strong Simulations of Coherent Beam-Beam Effects in the EIC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1942-1945. doi:10.18429/JACoW-IPAC2022-WEPOPT041
[n] W. LC. Le Coz et al., “Progress on the Beam Energy Monitor for the SPIRAL2 Accelerator.”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF29, pp. 617-619.
[n] S. M. Deambrosis, G. Keppel, V. Palmieri, V. Rampazzo, C. Roncolato, and R. G. Sharma, “A15 Superconductors: An Alternative to Niobium for RF Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA13, pp. 205-209.
[n] C. Johnstone and B. Autin, “Large Acceptance Muon Storage Rings for Neutrino Production: Lattice Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP51, pp. 3071-3073.
[n] W. Pelzer, “VICKSI Beam Bunch Preparation”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-14, pp. 380-383.
[n] L. Merminga, “Energy Recovery Linacs”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUOB001, pp. XX-XX.
[n] S. L. Smith, N. Bliss, A. R. Goulden, D. J. Holder, P. A. McIntosh, and G. Priebe, “The Status of the Daresbury Energy Recovery Linac Prototype”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN084, pp. 1106-1108.
[n] Z. Insepov, V. Ivanov, S. J. Jokela, and M. Wetstein, “Comparison of Back-scattering Properties of Electron Emission Materials”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP005, pp. 817-819.
[n] Y. Ohshiro, “DEVELOPMENT OF AN ECR ION SOURCE AT CNS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P20, pp. XX-XX.
[n] F. Stulle, A. Latina, S. Molloy, D. Schulte, and J. Snuverink, “Status of the CLIC RTML Studies”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC054, pp. 3013-3015.
[n] Z. A. Conway et al., “Development of a Superconducting Half-Wave Resonator for PXIE”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB067, pp. 624-626.
[n] M. N. Butler, F. Jones, S. Koscielniak, and G. H. Mackenzie, “Coulomb Scattering Cross Sections for Accelerator Design”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 654-657.
[n] R. Keitel, “Tdct - a Configuration Tool for EPICS Runtime Databases”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP098, pp. 871-873.
[n] H. Hotchi and Y. Sato, “Progress of beam power upgrade in J-PARC main ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1124-1127. doi:10.18429/JACoW-IPAC2025-TUPB072
[n] M. Tobiyama et al., “Development of Button Electrodes for SuperKEKB Rings”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM041, pp. 223-227.
[n] K. Schindl, “Upgrading the CERN PS Booster for SPS Multi-Pulse Filling and Antiproton Production”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2803-2806.
[n] A. Carpenter, J. F. Benesch, and C. J. Slominski, “RF Calibration of CEBAF Linac Cavities Through Phase Shifts”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 870-872. doi:10.18429/JACoW-NAPAC2016-WEB4CO03
[n] M. P. Crouch et al., “Impact of Long Range Beam-Beam Effects on Intensity and Luminosity Lifetimes from the 2015 LHC Run”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1422-1425. doi:10.18429/JACoW-IPAC2016-TUPMW007
[n] A. Y. Orlov, P. N. Alekseev, S. V. Barabin, and D. A. Liakin, “Universal Timer Module for the Timing System of the Accelerating-Storage Complex ITEP-TWAC”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB042, pp. 269-271.
[n] K. Artoos et al., “Modal Analysis and Measurement of Water Cooling Induced Vibrations on a CLIC Main Beam Quadrupole Prototype”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO028, pp. 541-543.
[n] O. Calvo and G. Tool, “Analysis of the Transmission Line Effects in the SSC Magnet System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1425-1428.
[n] S.-H. Jeong, J. Choi, D. E. Kim, and K.-H. Park, “Digital Power Supply for Air Core Magnet”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH085, pp. 445-447.
[n] F. Cioeta et al., “Thermal Simulations for Optical Transition Radiation Screen for ELI-NP Compton Gamma Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 536-539. doi:10.18429/JACoW-IBIC2016-TUPG75
[n] J. Teichert et al., “Design Upgrades of the Next Superconducting RF Gun for ELBE”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 326-328. doi:10.18429/JACoW-SRF2019-MOP100
[n] Charrue P., Denis B., Jonker M., Vanden Eynden M., “Upgrading the SPS Operational Software for the LHC Era
The SPS-2001 Software Project”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper WC1P08, pp. XX-XX.
[n] J. Grebenyuk, K. Floettmann, T. Mehrling, and J. Osterhoff, “Laser-Wakefield Acceleration with External Bunch Injection at REGAE”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA005, pp. 254-256.
[n] K. Iwamoto, Y. Ikeda, T. Kitamura, and T. Matsuoka, “Design of Cold BPM Feedthrough”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC041, pp. 1146-1148.
[n] L. M. Onischenko et al., “Compact Cyclotron as a Proton Source for the Detection of Explosives Based on Nuclear Resonance Absorption in Nitrogen”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC020, pp. 363-365.
[n] S. Monig, J. M. Coello de Portugal, A. Langner, E. H. Maclean, T. Persson, and R. Tomas, “Short Term Dynamic Aperture with AC Dipoles”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3496-3499. doi:10.18429/JACoW-IPAC2016-THPMR044
[n] M. M. Maggiore, L. Bromberg, C. E. Miller, J. V. Minervini, and A. Radovinsky, “Study of a Superconducting Compact Cyclotron for Delivering 20 MeV High Current Proton Beam”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT020, pp. 76-78.
[n] G. Stinson and P. Bricault, “A Proposal for an Additional Beamline to the TRIUMF ISAC Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB024, pp. 1670-1672.
[n] A. Balkcum and T. W. Habermann, “RF Sources for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIBKI01, pp. 2684-2684.
[n] B. Singh et al., “Active Shimming of Dynamic Multipoles of an APPLE II Undulator in the Diamond Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO057, pp. 1997-1999.
[n] P. Bosland, M. Couach, F. Guemas, M. Juillard, and A. F. Khoder, “NbTiN Sperconducting Thin Films Prepared by Magnetron Sputtering”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1316-1319.
[n] A. Ponton, Y. I. Levinsen, E. Sargsyan, A. C. France, O. Piquet, and B. Pottin, “Voltage Error Studies in the ESS RFQ”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3320-3323. doi:10.18429/JACoW-IPAC2016-THPMB039
[n] J.-H. Jang, D.-O. Jeon, H. Jin, and H. J. Kim, “Commissioning of the RAON Superconducting Linac”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THYA001, unpublished.
[n] J. N. Yan et al., “Measurement of Nanometer Electron Beam Sizes with Laser Interference using IPBSM”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUCC04, pp. 310-314.
[n] S. Watanabe et al., “Study of Beam Dynamics at Cooler Synchrotron TARN-II”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VII-04, pp. 286-289.
[n] J. C. Garnier et al., “System Relation Management and Status Tracking for CERN Accelerator Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC030, pp. 619-622.
[n] M. Volpi et al., “Performance Validation of High-Gradient X-Band Structures at the University of Melbourne’s X-LAB”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 260-264. doi:10.18429/JACoW-IBIC2025-MOPMO34
[n] M. Muramatsu, A. G. Drentje, and A. Kitagawa, “Development of Electron Cyclotron Resonance Ion Sources for Carbon-Ion Radiotherapy”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB23, pp. 247-249.
[n] D. Winklehner, J. R. Alonso, J. M. Conrad, and R. W. Hamm, “An RFQ Direct Injection Scheme for the IsoDAR High Intensity H2+ Cyclotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3384-3386. doi:10.18429/JACoW-IPAC2015-WEPTY048
[n] M. A. K. Othman et al., “THz-Based Femtosecond MeV Electron Bunch Compression”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3766-3768. doi:10.18429/JACoW-IPAC2019-THPGW079
[n] L. Liu, R. H. A. Farias, X. R. Resende, and P. F. Tavares, “Beam Based Calibration of the LNLS UVX Storage Ring BPMs”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP011, pp. 3717-3719.
[n] G. Franchetti and F. Zimmermann, “Trapping of Neutral Molecules by the Electromagnetic Beam Field”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1649-1654. doi:10.18429/JACoW-IPAC2022-WEIZSP2
[n] X. J. Wang et al., “Challenges of Operating a Photocathode RF Gun Injector”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4043, pp. 866-868.
[n] A. H. Lumpkin, M. Wendt, and J. M. Byrd, “Feasibility of Diagnostics Undulator Studies at ASTA”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD25, pp. 591-594.
[n] M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets During Run 2 and Future Plans”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3495-3498. doi:10.18429/JACoW-IPAC2017-WEPVA100
[n] R. Cohen, E. Martin, and K. Ziegler, “The Current Extractions Channel of the Nevis Synchrocyclotron Conversion Project”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 326-328.
[n] K. Yokoya, “Review of Beam-beam Interaction in Electron-Positron Circular Colliders”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 224-229.
[n] S. I. Meigo et al., “Measurement of Displacement Cross-Section for Structural Materials in High-Power Proton Accelerator Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 499-501. doi:10.18429/JACoW-IPAC2018-MOPML045
[n] N. Walker and D. Schulte, “Simulations of the Static Tuning for the TESLA Linear Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB007, pp. 2736-2738.
[n] Z. A. Conway et al., “Multi-Cell Reentrant Cavity Development and Testing At Cornell”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP047, pp. 930-932.
[n] R. Corsini and A. Hofmann, “A Possible FEL Based on LEP Superconducting Cavities”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP016G, pp. 721-723.
[n] A. Lyapin and S. T. Boogert, “A Proposal of a Single Coupler Cavity Beam Position Monitor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP024, pp. 4000-4002.
[n] J. Jones, A. Brynes, M. Johnson, M. King, and N. Ziyan, “Moonlight on the Serengeti: Casting (Digital) Shadows with SIMBA, PUMBA, LAURA and Friends”, presented at the IPAC'26, Deauville, France, May 2026, paper WEV6003, unpublished.
[n] M. Pasini, A. Bechtold, D. Habs, O. Kester, and A. Schempp, “Beam Dynamics Studies for the Low Energy Section at MAFF”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT034, pp. 1219-1221.
[n] S. Friis-Nielsen et al., “Commissioning Results from the Injection System for the Australian Synchrotron Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS005, pp. 3272-3274.
[n] J. Fitzgerald and J. Crisp, “A Compact BPM for the Fermilab Main Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P071, pp. 2072-2074.
[n] A. Wallander et al., “Approaching the Final Design of ITER Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOAAB03, pp. 490-493.
[n] S. Schreiber, “The Injector of the VUV-FEL at DESY”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP038, pp. XX-XX.
[n] H. Sugimoto, H. Koiso, A. Morita, Y. Ohnishi, and K. Oide, “Design Study of the SuperKEKB Interaction Region Optics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 950-952. doi:10.18429/JACoW-IPAC2014-TUOAB02
[n] A. Burrill et al., “Challenges Encountered during the Processing of the BNL ERL 5 Cell Accelerating Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS088, pp. 2541-2543.
[n] D. Reschke et al., “High Gradients in 3 GHz Nine-Cell Cavities for Superconducting Linear Colliders”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F17, pp. XX-XX.
[n] A. Pazos, P. Duval, S. Fiedler, and U. R. Ristau, “An Embedded Distributed System Based on TINE and Windows CE”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEX04, pp. 148-150.
[n] S. H. Kim, Y. J. Han, J. Y. Huang, S.-C. Kim, S. H. Nam, and S. S. Park, “Energy Stabilization of 2.5 GeV Linac using DeQing”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA063, pp. 717-719.
[n] D. Rifuggiato, L. Calabretta, V. A. Shchepunov, and A. I. Papash, “Axial Injection in the LNS Superconducting Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-15, pp. 646-649.
[n] B. Sarkar, S. K. Thakur, C. D. Datta, and D. Sarkar, “Control Strategy for the Main Magnet Power Supplies of the K-500 Superconducting Cyclotron”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_082.
[n] M. A. Kempkes, F. O. Arntz, M. P. J. Gaudreau, A. Kardo-Sysoev, and A. Krasnykh, “A Kicker Driver for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN111, pp. 2972-2974.
[n] R. Veness et al., “Design Aspects of the RF Contacts for the LHC Beam Vacuum Interconnects”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH037, pp. 2168-2170.
[n] J. Roberts et al., “Demonstration of CLIC Level Phase Stability using a High Bandwidth, Low Latency Drive Beam Phase Feedforward System at the CLIC Test Facility CTF3”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2673-2676. doi:10.18429/JACoW-IPAC2016-WEPOR006
[n] S. Q. Liao, “PIC Simulation of the High Current Beam for the LIA”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 124-126. doi:10.18429/JACoW-SAP2017-TUBH2
[n] G. Franchetti, “Mitigation of Space Charge and Nonlinear Resonance Induced Beam Loss in SIS100”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS002, pp. 589-591.
[n] J. Y. Huang et al., “RHIC Injection Transport Beam Emittance Measurements”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF04, pp. 45-48.
[n] Y. Yamamoto, E. Kako, and T. Shishido, “Development of Peak Hold Module for Electron Emission in STF-Type Power Coupler for the ILC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1034-1036. doi:10.18429/JACoW-IPAC2017-MOPVA073
[n] L. M. Ford, M. T. Heron, and R. J. Smith, “A High Precision Digitiser and Multiplexer for the New Orbit Processing Electronics at Daresbury”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1551-1554.
[n] F. Yan et al., “Commissioning of the China-ADS Injector-I Testing Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2048-2051. doi:10.18429/JACoW-IPAC2016-WEOBA02
[n] G. Feng et al., “Lattice Design and Beam Lifetime Study for HLS St01orage Ring Upgrade Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA042, pp. 2585-2587.
[n] A. V. Shemyakin et al., “Characterization of the Beam from the RFQ of the PIP-II Injector Test”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2425-2428. doi:10.18429/JACoW-IPAC2017-TUPVA139
[n] F. Wolff-Fabris, J. Pflueger, F. Hellberg, and F. Schmidt-Foehre, “Status of the Radiation Damage on the European XFEL Undulator Systems”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1776-1779. doi:10.18429/JACoW-IPAC2018-WEYGBD2
[n] N. Y. Huang et al., “Generation of Sub-Hundred Femtosecond X-Ray via Head-On Inverse Compton Scattering”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP007, pp. 2276-2278.
[n] R. Kammering and J. Carwardine, “An orbit feedback for the Free Electron Laser in Hamburg (FLASH)”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL015, pp. 58-60.
[n] M. Koopmans et al., “Vertical Beam Size Measurement Methods at the BESSY II Storage Ring and their Resolution Limits”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2491-2494. doi:10.18429/JACoW-IPAC2019-WEPGW012
[n] A. Romanenko, L. D. Cooley, J. P. Ozelis, N. Solyak, and V. P. Yakovlev, “Assumptions for the RF Losses in the 650 MHz Cavities of the Project X Linac”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP085, pp. 985-987.
[n] W. W. MacKay et al., “Commissioning and Future Plans for Polarized Protons in RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA004, pp. 24-26.
[n] E. Bravin et al., “Collision Rate Monitors for LHC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN067, pp. 4171-4173.
[n] Y. Y. Hu et al., “The Design of Dose Parameter Acquisition and Control System for a Pencil Beam Scanning System in HUST-PTF”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 143-146. doi:10.18429/JACoW-IBIC2018-MOPC14
[n] Y. Jiao, S. Y. Chen, and G. Xu, “Candidate HEPS Lattice Design With Emittances Approaching the Diffraction Limit of Hard X-Rays”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2703-2705. doi:10.18429/JACoW-IPAC2017-WEPAB054
[n] S. K. Parcell, D. W. Arnott, and E. M. Conard, “New Irradiation Facilities at the Australian National Medical Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-30, pp. 123-126.
[n] R. L. Geng et al., “Improving Gradient and Q Performance of BCP Etched Multi-Cell Cavities by Applying a Light EP”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO059, pp. 735-737.
[n] V. Parma et al., “Status of the Superconducting Proton Linac (SPL) Cryomodule”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP085, pp. 345-348.
[n] S. D. Jang, Y. G. Son, and J. S. Oh, “Design and Test Results on the Perveance Monitor for Measuring a 80-MW Klystron Characteristics”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP577, pp. XX-XX.
[n] Z. X. Shao, H. Gao, G. Liu, P. Liu, L. Wang, and H. Y. Zhang, “Research Progress of Power Supply System in HALS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1300-1302. doi:10.18429/JACoW-IPAC2019-TUPMP028
[n] R. Apel, H. Henke, F. Schoenfeld, and E. Weihreter, “A Cavity with Circular Waveguides for HOM Damping”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP004L, pp. 1940-1942.
[n] D. L. Hall, M. Liepe, J. T. Maniscalco, S. Posen, and Th. Proslier, “Recent Studies on the Current Limitations of State-of-the-Art Nb3Sn Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3454-3457. doi:10.18429/JACoW-IPAC2015-WEPTY074
[n] H. Eickhoff, Th. Haberer, and R. Steiner, “Accelerator Control for the GSI Cancer Therapy Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP06C, pp. 2348-2350.
[n] Q. A. Kerns, “Beam Position Measurement System at the Fermilab Main Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1513-1517.
[n] R. Becker, H. Hoeltermann, O. Kester, M. Kleinod, A. Schempp, and B. Zipfel, “The EBIS Option for Hadron Therapy”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP09C, pp. 2345-2347.
[n] D. R. Moffett and R. L. Barner, “An Intense H- Source for the IPNS-I Rapid Cycling Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2678-2681.
[n] R. Spesyvtsev, J. W. Baehr, M. Krasilnikov, and J. Roensch, “A Transverse Slice Emittance Measurement System Using Quadrupole Scan Technique and Streak Readout at PITZ”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH037, pp. 326-329.
[n] S. S. Gilardoni, S. Aumon, E. Effinger, J. Gil Flores, and U. Wienands, “Beam Loss Monitors Comparison at the CERN Proton Synchrotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC135, pp. 1341-1343.
[n] R. De Maria et al., “Optics modelling challenges for the HL-LHC”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1015, unpublished.
[n] V. Variale et al., “Measurements of Ion Selective Containment on the RF Charge Breeder Device BRIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE029, pp. 2065-2067.
[n] T. Demma, A. Drago, S. Guiducci, K. Ohmi, and M. Zobov, “A Simulation Study of the Electron Cloud Instability at DANE”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP070, pp. 4695-4697.
[n] K. Suda, E. Ikezawa, O. Kamigaito, N. Sakamoto, K. Yamada, and Y. Touchi, “Construction of the New Amplifiers for the RIKEN-LINAC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP122, pp. 339-341.
[n] L. Schaper, I. Hartl, M. Beye, and S. Schreiber, “A bright future for new innovative and excellent opportunities for science at FLASH”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL031, unpublished.
[n] W. A. Barth et al., “High Brilliance Uranium Beams for FAIR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2052-2054. doi:10.18429/JACoW-IPAC2016-WEOBA03
[n] D. Li et al., “Recent Progress on the Design of Normal Conducting APEX-II VHF CW Electron Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1891-1894. doi:10.18429/JACoW-IPAC2019-TUPRB097
[n] G. Gold, R. R. Johnson, B. F. Milton, and V. Sabaiduc, “Simulation and Design of a 70 MeV Cyclotron RF System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC001, pp. 3269-3271.
[n] X. Li et al., “Photocathode Preparation Studies Based on a Photocathode In-Situ Research Apparatus”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3620, unpublished.
[n] M. Mwaniki, P. Snopok, R. Thurman-Keup, and R. Ainsworth, “Evaluation of accuracy and resolution of the electron beam profile scanner at the Fermilab Main Injector”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 509-513. doi:10.18429/JACoW-IBIC2025-TUPMO20
[n] O. Groebner, P. C. Marin, and A. G. Mathewson, “Extended Study of Photon Stimulated Gas Desorption from OFHC Copper by 3.75 keV Critical Energy Photons”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 132-135.
[n] L. Buchmann et al., “An Intense Optically Pumped H
[n] V. W. Hughes, “The Yale Design Study of Linear Accelerators”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-04, pp. 98-100.
[n] A. Y. Zelinsky, I. V. Drebot, Yu. N. Grigor, R. Tatchyn, and O. D. Zvonarjova, “Radiation of Electron in the Field of Plane Light Wave”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT077, pp. 3997-3999.
[n] M. G. Cherney, J. Fujita, W. T. Waggoner, and Y. N. Gorbunov, “The STAR Slow Control System - Upgrade Status”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA12, pp. 340-341.
[n] G. Favia, F. Caspers, M. Morvillo, C. Rossi, and C. Vollinger, “Measurement Techniques and Application of Combined Parallel/Orthogonal Magnetic Bias on a Ferrite Tuned Resonator in Low Frequency Range (3-10 MHz)”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3087-3089. doi:10.18429/JACoW-IPAC2015-WEPMN070
[n] B. Keil et al., “Design of the SwissFEL BPM System”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC25, pp. 427-430.
[n] T. Y. Lee et al., “Residual Gas in the 14 m-long Aluminium Vacuum System of the Storage Ring of Taiwan Photon Source: toward Ultra-high Vacuum”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2396-2398. doi:10.18429/JACoW-IPAC2014-WEPME055
[n] T. A. Mohayai, “First Demonstration of Ionization Cooling in MICE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 5035-5040. doi:10.18429/JACoW-IPAC2018-FRXGBE3
[n] N. M. Kroll et al., “A High Power SLED-II Pulse Compression System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 327-330.
[n] R. Müller et al., “Orbit Drift Correction Using Correctors with Ultra-High DAC Resolution”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH301, pp. 1180-1182.
[n] F. Orsini et al., “Study and Realization of the First Superconducting Half Wave Resonator Prototype for the SRF Linac of the IFMIF Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC057, pp. 591-593.
[n] H. Z. Zimmermann, A. Bechtold, D. Habs, P. Kolb, and A. Schempp, “Beam Tests with the MAFF IH-RFQ at the IAP-Frankfurt”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP111, pp. 817-819.
[n] S. D. Nelson and J. E. Dunlap, “Electromagnetic Cold-Test Characterization of the Quad-Driven Stripline Kicker”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4076, pp. 234-236.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Zhang, I. Marneris, and J. Sandberg, “Large Scale Distributed Parameter Model of Main Magnet System and Frequency Decomposition Analysis”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS104, pp. 670-672.
- J. Qiang, Y. Hao, Y. Luo, C. Montag, F. J. Willeke, and D. Xu, “Strong-Strong Simulations of Coherent Beam-Beam Effects in the EIC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1942-1945.
- W. LC. Le Coz et al., “Progress on the Beam Energy Monitor for the SPIRAL2 Accelerator.”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF29, pp. 617-619.
- S. M. Deambrosis, G. Keppel, V. Palmieri, V. Rampazzo, C. Roncolato, and R. G. Sharma, “A15 Superconductors: An Alternative to Niobium for RF Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA13, pp. 205-209.
- C. Johnstone and B. Autin, “Large Acceptance Muon Storage Rings for Neutrino Production: Lattice Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP51, pp. 3071-3073.
- W. Pelzer, “VICKSI Beam Bunch Preparation”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-14, pp. 380-383.
- L. Merminga, “Energy Recovery Linacs”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUOB001, pp. XX-XX.
- S. L. Smith, N. Bliss, A. R. Goulden, D. J. Holder, P. A. McIntosh, and G. Priebe, “The Status of the Daresbury Energy Recovery Linac Prototype”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN084, pp. 1106-1108.
- Z. Insepov, V. Ivanov, S. J. Jokela, and M. Wetstein, “Comparison of Back-scattering Properties of Electron Emission Materials”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP005, pp. 817-819.
- Y. Ohshiro, “DEVELOPMENT OF AN ECR ION SOURCE AT CNS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P20, pp. XX-XX.
- F. Stulle, A. Latina, S. Molloy, D. Schulte, and J. Snuverink, “Status of the CLIC RTML Studies”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC054, pp. 3013-3015.
- Z. A. Conway et al., “Development of a Superconducting Half-Wave Resonator for PXIE”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB067, pp. 624-626.
- M. N. Butler, F. Jones, S. Koscielniak, and G. H. Mackenzie, “Coulomb Scattering Cross Sections for Accelerator Design”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 654-657.
- R. Keitel, “Tdct - a Configuration Tool for EPICS Runtime Databases”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP098, pp. 871-873.
- H. Hotchi and Y. Sato, “Progress of beam power upgrade in J-PARC main ring”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, pp. 1124-1127.
- M. Tobiyama et al., “Development of Button Electrodes for SuperKEKB Rings”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM041, pp. 223-227.
- K. Schindl, “Upgrading the CERN PS Booster for SPS Multi-Pulse Filling and Antiproton Production”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2803-2806.
- A. Carpenter, J. F. Benesch, and C. J. Slominski, “RF Calibration of CEBAF Linac Cavities Through Phase Shifts”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 870-872.
- M. P. Crouch et al., “Impact of Long Range Beam-Beam Effects on Intensity and Luminosity Lifetimes from the 2015 LHC Run”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1422-1425.
- A. Y. Orlov, P. N. Alekseev, S. V. Barabin, and D. A. Liakin, “Universal Timer Module for the Timing System of the Accelerating-Storage Complex ITEP-TWAC”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB042, pp. 269-271.
- K. Artoos et al., “Modal Analysis and Measurement of Water Cooling Induced Vibrations on a CLIC Main Beam Quadrupole Prototype”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO028, pp. 541-543.
- O. Calvo and G. Tool, “Analysis of the Transmission Line Effects in the SSC Magnet System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1425-1428.
- S.-H. Jeong, J. Choi, D. E. Kim, and K.-H. Park, “Digital Power Supply for Air Core Magnet”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH085, pp. 445-447.
- F. Cioeta et al., “Thermal Simulations for Optical Transition Radiation Screen for ELI-NP Compton Gamma Source”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 536-539.
- J. Teichert et al., “Design Upgrades of the Next Superconducting RF Gun for ELBE”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 326-328.
- Charrue P., Denis B., Jonker M., Vanden Eynden M., “Upgrading the SPS Operational Software for the LHC Era
The SPS-2001 Software Project”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper WC1P08, pp. XX-XX.
- J. Grebenyuk, K. Floettmann, T. Mehrling, and J. Osterhoff, “Laser-Wakefield Acceleration with External Bunch Injection at REGAE”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA005, pp. 254-256.
- K. Iwamoto, Y. Ikeda, T. Kitamura, and T. Matsuoka, “Design of Cold BPM Feedthrough”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC041, pp. 1146-1148.
- L. M. Onischenko et al., “Compact Cyclotron as a Proton Source for the Detection of Explosives Based on Nuclear Resonance Absorption in Nitrogen”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC020, pp. 363-365.
- S. Monig, J. M. Coello de Portugal, A. Langner, E. H. Maclean, T. Persson, and R. Tomas, “Short Term Dynamic Aperture with AC Dipoles”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3496-3499.
- M. M. Maggiore, L. Bromberg, C. E. Miller, J. V. Minervini, and A. Radovinsky, “Study of a Superconducting Compact Cyclotron for Delivering 20 MeV High Current Proton Beam”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT020, pp. 76-78.
- G. Stinson and P. Bricault, “A Proposal for an Additional Beamline to the TRIUMF ISAC Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB024, pp. 1670-1672.
- A. Balkcum and T. W. Habermann, “RF Sources for the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THIBKI01, pp. 2684-2684.
- B. Singh et al., “Active Shimming of Dynamic Multipoles of an APPLE II Undulator in the Diamond Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO057, pp. 1997-1999.
- P. Bosland, M. Couach, F. Guemas, M. Juillard, and A. F. Khoder, “NbTiN Sperconducting Thin Films Prepared by Magnetron Sputtering”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1316-1319.
- A. Ponton, Y. I. Levinsen, E. Sargsyan, A. C. France, O. Piquet, and B. Pottin, “Voltage Error Studies in the ESS RFQ”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3320-3323.
- J.-H. Jang, D.-O. Jeon, H. Jin, and H. J. Kim, “Commissioning of the RAON Superconducting Linac”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THYA001, unpublished.
- J. N. Yan et al., “Measurement of Nanometer Electron Beam Sizes with Laser Interference using IPBSM”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUCC04, pp. 310-314.
- S. Watanabe et al., “Study of Beam Dynamics at Cooler Synchrotron TARN-II”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VII-04, pp. 286-289.
- J. C. Garnier et al., “System Relation Management and Status Tracking for CERN Accelerator Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC030, pp. 619-622.
- M. Volpi et al., “Performance Validation of High-Gradient X-Band Structures at the University of Melbourne’s X-LAB”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 260-264.
- M. Muramatsu, A. G. Drentje, and A. Kitagawa, “Development of Electron Cyclotron Resonance Ion Sources for Carbon-Ion Radiotherapy”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB23, pp. 247-249.
- D. Winklehner, J. R. Alonso, J. M. Conrad, and R. W. Hamm, “An RFQ Direct Injection Scheme for the IsoDAR High Intensity H2+ Cyclotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3384-3386.
- M. A. K. Othman et al., “THz-Based Femtosecond MeV Electron Bunch Compression”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3766-3768.
- L. Liu, R. H. A. Farias, X. R. Resende, and P. F. Tavares, “Beam Based Calibration of the LNLS UVX Storage Ring BPMs”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP011, pp. 3717-3719.
- G. Franchetti and F. Zimmermann, “Trapping of Neutral Molecules by the Electromagnetic Beam Field”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1649-1654.
- X. J. Wang et al., “Challenges of Operating a Photocathode RF Gun Injector”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4043, pp. 866-868.
- A. H. Lumpkin, M. Wendt, and J. M. Byrd, “Feasibility of Diagnostics Undulator Studies at ASTA”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THPD25, pp. 591-594.
- M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets During Run 2 and Future Plans”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3495-3498.
- R. Cohen, E. Martin, and K. Ziegler, “The Current Extractions Channel of the Nevis Synchrocyclotron Conversion Project”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 326-328.
- K. Yokoya, “Review of Beam-beam Interaction in Electron-Positron Circular Colliders”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 224-229.
- S. I. Meigo et al., “Measurement of Displacement Cross-Section for Structural Materials in High-Power Proton Accelerator Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 499-501.
- N. Walker and D. Schulte, “Simulations of the Static Tuning for the TESLA Linear Collider”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB007, pp. 2736-2738.
- Z. A. Conway et al., “Multi-Cell Reentrant Cavity Development and Testing At Cornell”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP047, pp. 930-932.
- R. Corsini and A. Hofmann, “A Possible FEL Based on LEP Superconducting Cavities”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP016G, pp. 721-723.
- A. Lyapin and S. T. Boogert, “A Proposal of a Single Coupler Cavity Beam Position Monitor”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP024, pp. 4000-4002.
- J. Jones, A. Brynes, M. Johnson, M. King, and N. Ziyan, “Moonlight on the Serengeti: Casting (Digital) Shadows with SIMBA, PUMBA, LAURA and Friends”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEV6003, this conference.
- M. Pasini, A. Bechtold, D. Habs, O. Kester, and A. Schempp, “Beam Dynamics Studies for the Low Energy Section at MAFF”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT034, pp. 1219-1221.
- S. Friis-Nielsen et al., “Commissioning Results from the Injection System for the Australian Synchrotron Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS005, pp. 3272-3274.
- J. Fitzgerald and J. Crisp, “A Compact BPM for the Fermilab Main Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P071, pp. 2072-2074.
- A. Wallander et al., “Approaching the Final Design of ITER Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOAAB03, pp. 490-493.
- S. Schreiber, “The Injector of the VUV-FEL at DESY”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP038, pp. XX-XX.
- H. Sugimoto, H. Koiso, A. Morita, Y. Ohnishi, and K. Oide, “Design Study of the SuperKEKB Interaction Region Optics”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 950-952.
- A. Burrill et al., “Challenges Encountered during the Processing of the BNL ERL 5 Cell Accelerating Cavity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS088, pp. 2541-2543.
- D. Reschke et al., “High Gradients in 3 GHz Nine-Cell Cavities for Superconducting Linear Colliders”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F17, pp. XX-XX.
- A. Pazos, P. Duval, S. Fiedler, and U. R. Ristau, “An Embedded Distributed System Based on TINE and Windows CE”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEX04, pp. 148-150.
- S. H. Kim, Y. J. Han, J. Y. Huang, S.-C. Kim, S. H. Nam, and S. S. Park, “Energy Stabilization of 2.5 GeV Linac using DeQing”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA063, pp. 717-719.
- D. Rifuggiato, L. Calabretta, V. A. Shchepunov, and A. I. Papash, “Axial Injection in the LNS Superconducting Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-15, pp. 646-649.
- B. Sarkar, S. K. Thakur, C. D. Datta, and D. Sarkar, “Control Strategy for the Main Magnet Power Supplies of the K-500 Superconducting Cyclotron”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_082.
- M. A. Kempkes, F. O. Arntz, M. P. J. Gaudreau, A. Kardo-Sysoev, and A. Krasnykh, “A Kicker Driver for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN111, pp. 2972-2974.
- R. Veness et al., “Design Aspects of the RF Contacts for the LHC Beam Vacuum Interconnects”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH037, pp. 2168-2170.
- J. Roberts et al., “Demonstration of CLIC Level Phase Stability using a High Bandwidth, Low Latency Drive Beam Phase Feedforward System at the CLIC Test Facility CTF3”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2673-2676.
- S. Q. Liao, “PIC Simulation of the High Current Beam for the LIA”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 124-126.
- G. Franchetti, “Mitigation of Space Charge and Nonlinear Resonance Induced Beam Loss in SIS100”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS002, pp. 589-591.
- J. Y. Huang et al., “RHIC Injection Transport Beam Emittance Measurements”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF04, pp. 45-48.
- Y. Yamamoto, E. Kako, and T. Shishido, “Development of Peak Hold Module for Electron Emission in STF-Type Power Coupler for the ILC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1034-1036.
- L. M. Ford, M. T. Heron, and R. J. Smith, “A High Precision Digitiser and Multiplexer for the New Orbit Processing Electronics at Daresbury”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1551-1554.
- F. Yan et al., “Commissioning of the China-ADS Injector-I Testing Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2048-2051.
- G. Feng et al., “Lattice Design and Beam Lifetime Study for HLS St01orage Ring Upgrade Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA042, pp. 2585-2587.
- A. V. Shemyakin et al., “Characterization of the Beam from the RFQ of the PIP-II Injector Test”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2425-2428.
- F. Wolff-Fabris, J. Pflueger, F. Hellberg, and F. Schmidt-Foehre, “Status of the Radiation Damage on the European XFEL Undulator Systems”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1776-1779.
- N. Y. Huang et al., “Generation of Sub-Hundred Femtosecond X-Ray via Head-On Inverse Compton Scattering”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP007, pp. 2276-2278.
- R. Kammering and J. Carwardine, “An orbit feedback for the Free Electron Laser in Hamburg (FLASH)”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL015, pp. 58-60.
- M. Koopmans et al., “Vertical Beam Size Measurement Methods at the BESSY II Storage Ring and their Resolution Limits”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2491-2494.
- A. Romanenko, L. D. Cooley, J. P. Ozelis, N. Solyak, and V. P. Yakovlev, “Assumptions for the RF Losses in the 650 MHz Cavities of the Project X Linac”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP085, pp. 985-987.
- W. W. MacKay et al., “Commissioning and Future Plans for Polarized Protons in RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPA004, pp. 24-26.
- E. Bravin et al., “Collision Rate Monitors for LHC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN067, pp. 4171-4173.
- Y. Y. Hu et al., “The Design of Dose Parameter Acquisition and Control System for a Pencil Beam Scanning System in HUST-PTF”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 143-146.
- Y. Jiao, S. Y. Chen, and G. Xu, “Candidate HEPS Lattice Design With Emittances Approaching the Diffraction Limit of Hard X-Rays”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2703-2705.
- S. K. Parcell, D. W. Arnott, and E. M. Conard, “New Irradiation Facilities at the Australian National Medical Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-30, pp. 123-126.
- R. L. Geng et al., “Improving Gradient and Q Performance of BCP Etched Multi-Cell Cavities by Applying a Light EP”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO059, pp. 735-737.
- V. Parma et al., “Status of the Superconducting Proton Linac (SPL) Cryomodule”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP085, pp. 345-348.
- S. D. Jang, Y. G. Son, and J. S. Oh, “Design and Test Results on the Perveance Monitor for Measuring a 80-MW Klystron Characteristics”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP577, pp. XX-XX.
- Z. X. Shao, H. Gao, G. Liu, P. Liu, L. Wang, and H. Y. Zhang, “Research Progress of Power Supply System in HALS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1300-1302.
- R. Apel, H. Henke, F. Schoenfeld, and E. Weihreter, “A Cavity with Circular Waveguides for HOM Damping”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP004L, pp. 1940-1942.
- D. L. Hall, M. Liepe, J. T. Maniscalco, S. Posen, and Th. Proslier, “Recent Studies on the Current Limitations of State-of-the-Art Nb3Sn Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3454-3457.
- H. Eickhoff, Th. Haberer, and R. Steiner, “Accelerator Control for the GSI Cancer Therapy Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP06C, pp. 2348-2350.
- Q. A. Kerns, “Beam Position Measurement System at the Fermilab Main Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1513-1517.
- R. Becker, H. Hoeltermann, O. Kester, M. Kleinod, A. Schempp, and B. Zipfel, “The EBIS Option for Hadron Therapy”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP09C, pp. 2345-2347.
- D. R. Moffett and R. L. Barner, “An Intense H- Source for the IPNS-I Rapid Cycling Synchrotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2678-2681.
- R. Spesyvtsev, J. W. Baehr, M. Krasilnikov, and J. Roensch, “A Transverse Slice Emittance Measurement System Using Quadrupole Scan Technique and Streak Readout at PITZ”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH037, pp. 326-329.
- S. S. Gilardoni, S. Aumon, E. Effinger, J. Gil Flores, and U. Wienands, “Beam Loss Monitors Comparison at the CERN Proton Synchrotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC135, pp. 1341-1343.
- R. De Maria et al., “Optics modelling challenges for the HL-LHC”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1015, this conference.
- V. Variale et al., “Measurements of Ion Selective Containment on the RF Charge Breeder Device BRIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE029, pp. 2065-2067.
- T. Demma, A. Drago, S. Guiducci, K. Ohmi, and M. Zobov, “A Simulation Study of the Electron Cloud Instability at DANE”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP070, pp. 4695-4697.
- K. Suda, E. Ikezawa, O. Kamigaito, N. Sakamoto, K. Yamada, and Y. Touchi, “Construction of the New Amplifiers for the RIKEN-LINAC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP122, pp. 339-341.
- L. Schaper, I. Hartl, M. Beye, and S. Schreiber, “A bright future for new innovative and excellent opportunities for science at FLASH”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL031, unpublished.
- W. A. Barth et al., “High Brilliance Uranium Beams for FAIR”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2052-2054.
- D. Li et al., “Recent Progress on the Design of Normal Conducting APEX-II VHF CW Electron Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1891-1894.
- G. Gold, R. R. Johnson, B. F. Milton, and V. Sabaiduc, “Simulation and Design of a 70 MeV Cyclotron RF System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC001, pp. 3269-3271.
- X. Li et al., “Photocathode Preparation Studies Based on a Photocathode In-Situ Research Apparatus”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP3620, this conference.
- M. Mwaniki, P. Snopok, R. Thurman-Keup, and R. Ainsworth, “Evaluation of accuracy and resolution of the electron beam profile scanner at the Fermilab Main Injector”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 509-513.
- O. Groebner, P. C. Marin, and A. G. Mathewson, “Extended Study of Photon Stimulated Gas Desorption from OFHC Copper by 3.75 keV Critical Energy Photons”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 132-135.
- L. Buchmann et al., “An Intense Optically Pumped H
- V. W. Hughes, “The Yale Design Study of Linear Accelerators”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-04, pp. 98-100.
- A. Y. Zelinsky, I. V. Drebot, Yu. N. Grigor, R. Tatchyn, and O. D. Zvonarjova, “Radiation of Electron in the Field of Plane Light Wave”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT077, pp. 3997-3999.
- M. G. Cherney, J. Fujita, W. T. Waggoner, and Y. N. Gorbunov, “The STAR Slow Control System - Upgrade Status”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA12, pp. 340-341.
- G. Favia, F. Caspers, M. Morvillo, C. Rossi, and C. Vollinger, “Measurement Techniques and Application of Combined Parallel/Orthogonal Magnetic Bias on a Ferrite Tuned Resonator in Low Frequency Range (3-10 MHz)”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3087-3089.
- B. Keil et al., “Design of the SwissFEL BPM System”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC25, pp. 427-430.
- T. Y. Lee et al., “Residual Gas in the 14 m-long Aluminium Vacuum System of the Storage Ring of Taiwan Photon Source: toward Ultra-high Vacuum”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2396-2398.
- T. A. Mohayai, “First Demonstration of Ionization Cooling in MICE”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 5035-5040.
- N. M. Kroll et al., “A High Power SLED-II Pulse Compression System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 327-330.
- R. Müller et al., “Orbit Drift Correction Using Correctors with Ultra-High DAC Resolution”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH301, pp. 1180-1182.
- F. Orsini et al., “Study and Realization of the First Superconducting Half Wave Resonator Prototype for the SRF Linac of the IFMIF Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC057, pp. 591-593.
- H. Z. Zimmermann, A. Bechtold, D. Habs, P. Kolb, and A. Schempp, “Beam Tests with the MAFF IH-RFQ at the IAP-Frankfurt”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP111, pp. 817-819.
- S. D. Nelson and J. E. Dunlap, “Electromagnetic Cold-Test Characterization of the Quad-Driven Stripline Kicker”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4076, pp. 234-236.
Back to search