Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Tak?ícs, F. Szelecs?®nyi, F. T?írk?ínyi, A. Hermanne, M. Sonck, and J. van Hoyweghen, “The Use of Cross Section Data for Monitoring Charged Particle Beam Parameters”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-26, pp. 246-249.
[n] Y. H. Chin, S. Lee, Y. Shobuda, K. Takata, T. Toyama, and H. Tsutsui, “Impedance and radiation generated by a ceramic chamber with RF shields and TiN coating”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBX01, pp. 125-127.
[n] J. Norem et al., “An $e^+ e^-$ Top Factory in a 50+50 TeV Hadron Collider Tunnel”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W001, pp. 363-365.
[n] S. Hunt, “An Integrated Environment for Control System Development”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP711, pp. XX-XX.
[n] Y. F. Liu, C. Luo, D. Reschke, L. Steder, and M. Wiencek, “Occurring Dependency between Adjustable Coupling and Q_0 - Finding and Solving a Problem during Vertical Cavity Testing at DESY”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 619. doi:10.18429/JACoW-SRF2021-WEPCAV013
[n] L. Faillace et al., “An Ultra-high Repetition Rate S-band RF Gun”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH021, pp. 282-284.
[n] C. E. Hill and M. O, “The High Voltage System for the High Intensity CERN Proton Source”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4051, pp. 165-167.
[n] A. V. Aleksandrov and C. Deibele, “Experimental Study of the SNS MEBT Chopper Performance”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD063, pp. 831-833.
[n] M. K. Sullivan, K. J. Bertsche, A. Novokhatski, J. Seeman, and U. Wienands, “Changing the PEP-II Center-of-Mass Energy down to 10 GeV and up to 11 GeV”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP052, pp. 2613-2615.
[n] E. Senicheva, A. Lehrach, and D. Prasuhn, “The PANDA Insertion Impedance in High Energy Storage Ring of FAIR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH038, pp. 2865-2867.
[n] B. G?Ñlnander et al., “Status of Design Work Towards an Electron Cooler for HESR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP10, pp. 182-186.
[n] S. A. Kahn, G. Flanagan, F. Marhauser, M. L. Lopes, and K. Yonehara, “Conceptual Design of the Muon Cooling Channel to Incorporate RF Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1325-1327. doi:10.18429/JACoW-IPAC2014-TUPRO116
[n] T. Kamps et al., “R&D Towards a Laser Based Beam Size Monitor for the Future Linear Collider”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI100, pp. 1912-1914.
[n] D. J. Harding et al., “Restoring the Skew Quadrupole Moment in Tevatron Dipoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT053, pp. 3244-3246.
[n] V. Andreev et al., “Scale Room Temperature Model of the Superconducting RFQ1 for the PIAVE Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4085, pp. 965-967.
[n] N. Fuster-Martinez et al., “Realistic Beam Halo Model study in the Extraction Line of ATF2”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2038-2041. doi:10.18429/JACoW-IPAC2015-TUPTY019
[n] S. Redaelli et al., “Colliding Nanobeams in CLIC with Magnets Stabilized to the Sub-nm Level”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPC005, pp. 665-667.
[n] T. Sugimoto et al., “Continuously Adjustable Permanent Magnet Quadrupole for a Final Focus”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP015, pp. 583-585.
[n] R. L. Kustom, E. A. Crosbie, and T. K. Khoe, “A 1500 MeV Fixed-Field Alternating-Gradient Synchrotron for a Pulsed-Spallation Neutron Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2672-2675.
[n] M. T. F. Pivi et al., “Secondary Electron Yield Measurements and Groove Chambers Update Tests in the PEP-II Beam Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP064, pp. 691-693.
[n] A. Laxdal et al., “Novel method for real-time temperature monitoring of isotope production targets”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper TUCC01, unpublished.
[n] M. Veronese, M. B. Danailov, M. Ferianis, D. Filippetto, and S. P. Jamison, “Laboratory Characterization of Electro Optical Sampling (EOS) and THz Diagnostics for FERMI by Means of a Laser Driven pulsed THz Source”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC12, pp. 258-261.
[n] A. Zeller, V. Blideanu, R. C. Gupta, R. M. Ronningen, and B. Sherrill, “Radiation Resistant Magnets for the RIA Fragment Separator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT031, pp. 2200-2202.
[n] E. Kikutani, J. Flanagan, T. Ieiri, and M. Tobiyama, “Present Status of the KEKB Bunch Feedback Systems”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI034, pp. 2085-2087.
[n] J. W. Baehr, H. L. Luedecke, and J. Roensch, “Optical System for Measuring Electron Bunch Length and Longitudinal Phase Space at Pitz: Extension and Methodical Investigations”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB20, pp. 274-276.
[n] M. McAteer, M. Abo-Bakr, B. C. Kuske, and A. Neumann, “Simulations of Dark Current from the BERLinPro Booster Module”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 671-673. doi:10.18429/JACoW-IPAC2016-MOPOR033
[n] S. Yammine and H. Thiesen, “HL-LHC Inner Triplet Powering and Control Strategy”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3544-3546. doi:10.18429/JACoW-IPAC2017-WEPVA116
[n] L. Hendrickson et al., “Implementation of Dynamic Misalignments and Luminosity Stabilization”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB014, pp. 2757-2759.
[n] Y. Tanimoto, “Direct Observation of the Dust-trapping Phenomenon”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUIC02, pp. 315-323.
[n] R. L. Gluckstern, “Beam Loading Effects in Proton Linacs”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 3-02, pp. 95-103.
[n] C. Houghton and L. Bobb, “Testing of SiC Blade X-ray Beam Position Monitors for Synchrotron Front-Ends”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 722-726. doi:10.18429/JACoW-IBIC2025-WEPMO05
[n] S. Boychenko et al., “Second Generation LHC Analysis Framework: Workload-based and User-oriented Solution”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2784-2787. doi:10.18429/JACoW-IPAC2016-WEPOR051
[n] J. Liu, S. H. Du, C. Guo, J. C. Yang, and G. Zhu, “Development and Application of High-Performance CISP-GPU Code for High Intensity Effects in HIAF”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper WEA1I1, unpublished.
[n] Q. S. Shu et al., “R & D in Progress to Overcome Field Emission in Superconducting Accelerator Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 491-494.
[n] Y. Wu, “The BEPC Storage Ring - Status and Prospects”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 180-183.
[n] P. He, D. Z. Guo, B. Liu, Y. Ma, Y. C. Yang, and L. Zhang, “Deposition of Non-Evaporative Getters R&D Activity for HEPS-TF”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 238-239. doi:10.18429/JACoW-NAPAC2016-MOPOB81
[n] A. M. Todd and M. F. Reusch, “RFQ Beam Dynamics Model Development”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU410, pp. 326-328.
[n] R. C. Gupta et al., “Optimization of Open Midplane Dipole Design for LHC IR Upgrade”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT049, pp. 3055-3057.
[n] F. Loehl et al., “Experimental Determination of the Timing Stability of the Optical Synchronization System at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC135, pp. 1386-1388.
[n] C. J. Richard, S. Cogan, and S. M. Lidia, “Bunch Length Measurements Using Beam Position Monitors”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP20, unpublished.
[n] A. V. Makeev, N. Atuchin, D. Bolkhovityanov, P. B. Cheblakov, and S. E. Karnaev, “Centralized Software and Hardware Configuration Tool for Large and Small Experimental Physics Facilities”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC022, pp. 591-593.
[n] R. Bracco et al., “Design, Construction and Testing of Small, Intense Permanent Magnet Sextupoles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP109G, pp. 2204-2206.
[n] R. Fedele, F. Galluccio, V. I. Man, and G. Miele, “Phase Space Description of Particle Beam Dynamics in the Thermal Wave Model”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1365-1368.
[n] A. Y. Murokh, R. B. Agustsson, P. Frigola, O. V. Chubar, and V. Solovyov, “Applications of Textured Dysprosium Concentrators in Ultra-Short Period Insertion Devices”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP231, pp. 1256-1258.
[n] R. Huang and Q. K. Jia, “Primary Study of the Photocathode Electron Gun With a Cone Cathode and Radial Polarization Laser”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1216-1219. doi:10.18429/JACoW-NAPAC2016-THPOA56
[n] R. T. Avery, K. L. Brown, and J. M. Peterson, “The PEP Injection System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1423-1426.
[n] D. Briggs et al., “Computer Modelling of Bunch-by-Bunch Feedback for the SLAC B-Factory Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1407-1410.
[n] C. T. Rogers, D. V. Neuffer, and P. Snopok, “Control of Beam Losses in the Front End for the Neutrino Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC041, pp. 223-225.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Tak?ícs, F. Szelecs?®nyi, F. T?írk?ínyi, A. Hermanne, M. Sonck, and J. van Hoyweghen, “The Use of Cross Section Data for Monitoring Charged Particle Beam Parameters”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-26, pp. 246-249.
- Y. H. Chin, S. Lee, Y. Shobuda, K. Takata, T. Toyama, and H. Tsutsui, “Impedance and radiation generated by a ceramic chamber with RF shields and TiN coating”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUBX01, pp. 125-127.
- J. Norem et al., “An $e^+ e^-$ Top Factory in a 50+50 TeV Hadron Collider Tunnel”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W001, pp. 363-365.
- S. Hunt, “An Integrated Environment for Control System Development”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP711, pp. XX-XX.
- Y. F. Liu, C. Luo, D. Reschke, L. Steder, and M. Wiencek, “Occurring Dependency between Adjustable Coupling and Q_0 - Finding and Solving a Problem during Vertical Cavity Testing at DESY”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 619.
- L. Faillace et al., “An Ultra-high Repetition Rate S-band RF Gun”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH021, pp. 282-284.
- C. E. Hill and M. O, “The High Voltage System for the High Intensity CERN Proton Source”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4051, pp. 165-167.
- A. V. Aleksandrov and C. Deibele, “Experimental Study of the SNS MEBT Chopper Performance”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD063, pp. 831-833.
- M. K. Sullivan, K. J. Bertsche, A. Novokhatski, J. Seeman, and U. Wienands, “Changing the PEP-II Center-of-Mass Energy down to 10 GeV and up to 11 GeV”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP052, pp. 2613-2615.
- E. Senicheva, A. Lehrach, and D. Prasuhn, “The PANDA Insertion Impedance in High Energy Storage Ring of FAIR”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH038, pp. 2865-2867.
- B. G?Ñlnander et al., “Status of Design Work Towards an Electron Cooler for HESR”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP10, pp. 182-186.
- S. A. Kahn, G. Flanagan, F. Marhauser, M. L. Lopes, and K. Yonehara, “Conceptual Design of the Muon Cooling Channel to Incorporate RF Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1325-1327.
- T. Kamps et al., “R&D Towards a Laser Based Beam Size Monitor for the Future Linear Collider”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI100, pp. 1912-1914.
- D. J. Harding et al., “Restoring the Skew Quadrupole Moment in Tevatron Dipoles”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT053, pp. 3244-3246.
- V. Andreev et al., “Scale Room Temperature Model of the Superconducting RFQ1 for the PIAVE Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4085, pp. 965-967.
- N. Fuster-Martinez et al., “Realistic Beam Halo Model study in the Extraction Line of ATF2”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2038-2041.
- S. Redaelli et al., “Colliding Nanobeams in CLIC with Magnets Stabilized to the Sub-nm Level”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPC005, pp. 665-667.
- T. Sugimoto et al., “Continuously Adjustable Permanent Magnet Quadrupole for a Final Focus”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP015, pp. 583-585.
- R. L. Kustom, E. A. Crosbie, and T. K. Khoe, “A 1500 MeV Fixed-Field Alternating-Gradient Synchrotron for a Pulsed-Spallation Neutron Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2672-2675.
- M. T. F. Pivi et al., “Secondary Electron Yield Measurements and Groove Chambers Update Tests in the PEP-II Beam Line”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP064, pp. 691-693.
- A. Laxdal et al., “Novel method for real-time temperature monitoring of isotope production targets”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper TUCC01, unpublished.
- M. Veronese, M. B. Danailov, M. Ferianis, D. Filippetto, and S. P. Jamison, “Laboratory Characterization of Electro Optical Sampling (EOS) and THz Diagnostics for FERMI by Means of a Laser Driven pulsed THz Source”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC12, pp. 258-261.
- A. Zeller, V. Blideanu, R. C. Gupta, R. M. Ronningen, and B. Sherrill, “Radiation Resistant Magnets for the RIA Fragment Separator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT031, pp. 2200-2202.
- E. Kikutani, J. Flanagan, T. Ieiri, and M. Tobiyama, “Present Status of the KEKB Bunch Feedback Systems”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI034, pp. 2085-2087.
- J. W. Baehr, H. L. Luedecke, and J. Roensch, “Optical System for Measuring Electron Bunch Length and Longitudinal Phase Space at Pitz: Extension and Methodical Investigations”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB20, pp. 274-276.
- M. McAteer, M. Abo-Bakr, B. C. Kuske, and A. Neumann, “Simulations of Dark Current from the BERLinPro Booster Module”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 671-673.
- S. Yammine and H. Thiesen, “HL-LHC Inner Triplet Powering and Control Strategy”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3544-3546.
- L. Hendrickson et al., “Implementation of Dynamic Misalignments and Luminosity Stabilization”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB014, pp. 2757-2759.
- Y. Tanimoto, “Direct Observation of the Dust-trapping Phenomenon”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUIC02, pp. 315-323.
- R. L. Gluckstern, “Beam Loading Effects in Proton Linacs”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 3-02, pp. 95-103.
- C. Houghton and L. Bobb, “Testing of SiC Blade X-ray Beam Position Monitors for Synchrotron Front-Ends”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 722-726.
- S. Boychenko et al., “Second Generation LHC Analysis Framework: Workload-based and User-oriented Solution”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2784-2787.
- J. Liu, S. H. Du, C. Guo, J. C. Yang, and G. Zhu, “Development and Application of High-Performance CISP-GPU Code for High Intensity Effects in HIAF”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA1I1, unpublished.
- Q. S. Shu et al., “R & D in Progress to Overcome Field Emission in Superconducting Accelerator Cavities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 491-494.
- Y. Wu, “The BEPC Storage Ring - Status and Prospects”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 180-183.
- P. He, D. Z. Guo, B. Liu, Y. Ma, Y. C. Yang, and L. Zhang, “Deposition of Non-Evaporative Getters R&D Activity for HEPS-TF”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 238-239.
- A. M. Todd and M. F. Reusch, “RFQ Beam Dynamics Model Development”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU410, pp. 326-328.
- R. C. Gupta et al., “Optimization of Open Midplane Dipole Design for LHC IR Upgrade”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT049, pp. 3055-3057.
- F. Loehl et al., “Experimental Determination of the Timing Stability of the Optical Synchronization System at FLASH”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC135, pp. 1386-1388.
- C. J. Richard, S. Cogan, and S. M. Lidia, “Bunch Length Measurements Using Beam Position Monitors”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper TUPP20, unpublished.
- A. V. Makeev, N. Atuchin, D. Bolkhovityanov, P. B. Cheblakov, and S. E. Karnaev, “Centralized Software and Hardware Configuration Tool for Large and Small Experimental Physics Facilities”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC022, pp. 591-593.
- R. Bracco et al., “Design, Construction and Testing of Small, Intense Permanent Magnet Sextupoles”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP109G, pp. 2204-2206.
- R. Fedele, F. Galluccio, V. I. Man, and G. Miele, “Phase Space Description of Particle Beam Dynamics in the Thermal Wave Model”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1365-1368.
- A. Y. Murokh, R. B. Agustsson, P. Frigola, O. V. Chubar, and V. Solovyov, “Applications of Textured Dysprosium Concentrators in Ultra-Short Period Insertion Devices”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP231, pp. 1256-1258.
- R. Huang and Q. K. Jia, “Primary Study of the Photocathode Electron Gun With a Cone Cathode and Radial Polarization Laser”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1216-1219.
- R. T. Avery, K. L. Brown, and J. M. Peterson, “The PEP Injection System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1423-1426.
- D. Briggs et al., “Computer Modelling of Bunch-by-Bunch Feedback for the SLAC B-Factory Design”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1407-1410.
- C. T. Rogers, D. V. Neuffer, and P. Snopok, “Control of Beam Losses in the Front End for the Neutrino Factory”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC041, pp. 223-225.
Back to search