Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Martínez Samblas, E. Calvo Giraldo, M. Gonzalez-Berges, and M. Krupa, “Python Expert Applications for Large Beam Instrumentation Systems at CERN”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1460-1464. doi:10.18429/JACoW-ICALEPCS2023-THPDP061
[n] S. Assadi, “Adaptable Machine Protection Architecture for CW, High Intensity Accelerators”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3402-3404. doi:10.18429/JACoW-IPAC2015-WEPTY057
[n] K. Yamada, “Upgrade and Current Status of High-Frequency Systems for RIKEN Ring Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOAI02, pp. 6-11. doi:10.18429/JACoW-CYCLOTRONS2022-MOAI02
[n] F. Simoens and A. France, “Tuning Procedure of The 5 MeV IPHI RFQ”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH486, pp. 794-796.
[n] J. Bengtsson, “Ultra Low Emittance Light Sources”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUXM01, pp. 988-992.
[n] F. Eozenou, C. Z. Antoine, A. Aspart, S. Berry, J. F. Denis, and B. Malki, “Efficiency of Electropolishing versus Bath Composition and Aging: First Results”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP02, pp. 451-454.
[n] G. Kraft et al., “First Patient Treatment at GSI with Heavy Ions”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper FRX02A, pp. 212-216.
[n] K. A. Brown, M. Harvey, Y. C. Jing, P. K. Kankiya, and S. Seletskiy, “Online Simulation Framework Through HTTP Services”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 734-738. doi:10.18429/JACoW-ICALEPCS2017-TUPHA135
[n] W. Namkung, “Linac R&D in Korea”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper FR1002, pp. 1026-1030.
[n] H. Karadeniz, E. Recepoglu, and S. Sultansoy, “QCD Explorer Based eA and A Colliders”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP051, pp. 2635-2637.
[n] W. M. Fawley, G. Penn, A. Sessler, and J. S. Wurtele, “Studies of the Front End of a Neutrino Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC011, pp. 748-750.
[n] D. Giove, P. Gmaj, L. Lo Monaco, G. Raia, and L. Rossi, “Test and Calibration of the Magnetic Measurement System for the Superconducting Cyclotron at LNS, Catania”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 936-939.
[n] Y. J. Yuan et al., “Status and Upgrades of HIRFL”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUM1I01, pp. 110-114.
[n] G. Broggi, A. Abramov, M. Boscolo, R. Bruce, R. Kersevan, and S. Redaelli, “Beam losses due to beam-residual gas interactions in the FCC-ee”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 390-393. doi:10.18429/JACoW-IPAC2025-MOPM036
[n] R. Klein, R. Thornagel, and G. Ulm, “BESSY II Operated as a Primary Source Standard”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOBLH03, pp. 273-275.
[n] V. Litvinenko, “Future Electron-Hadron Colliders”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEXMH02, pp. 2364-2368.
[n] K. O. Thielheim, “Particle Acceleration in Electromagnetic Wave Fields”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 951-954.
[n] J. A. Crittenden and S. Wang, “Comparison of Transfer Map Derivation Methods for Static Magnetic Fields”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 799-801. doi:10.18429/JACoW-IPAC2021-MOPAB253
[n] V. G. Dudnikov et al., “Positive and Negative Ions Radio Frequency Sources with Solenoidal Magnetic Field”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 799-802. doi:10.18429/JACoW-NAPAC2016-WEPOA45
[n] J. Barranco and Y. Papaphilippou, “Efficiency and Robustness of the PS2 Collimation System”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC01, pp. 259-261.
[n] C. Xu, M. J. Kelley, and C. E. Reece, “SRF Cavity Surface Topography Characterization Using Replica Techniques”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC093, pp. 3497-3499.
[n] Y. B. Leng, Z. C. Chen, Y. B. Yan, and R. X. Yuan, “Beam Diagnostics Global Data Warehouse Implementation and Application at SSRF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC116, pp. 1287-1289.
[n] W.-Y. Lin, T.-W. Hsu, B.-Y. Huang, C.-Y. Hung, T.-Y. Lee, and H.-J. Tsai, “Development of a real-time waveform monitoring system for pulsed power supplies at Taiwan photon source”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6691, unpublished.
[n] L. Monaco et al., “Application of In-Vacuum Infrared Pyrometry During Fabrication of European XFEL Niobium Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP062, pp. 570-574.
[n] Y. Zhang, Z. Liu, and R. Remec, “ISOL Target-Vapor Transport System Simulations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP028, pp. 2850-2852.
[n] B. Rusnak et al., “Superconducting Multicell Cavity Development Program at Los Alamos”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1021-1024.
[n] J. T. Collins, H. Cease, S. J. Izzo, Z. Liu, J. Nudell, and C. A. Preissner, “Preliminary Design of the Magnet Support and Alignment Systems for the Aps-U Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 87-89. doi:10.18429/JACoW-MEDSI2016-MOPE34
[n] R. I. Farnsworth, C. A. Myers, and A. C. Starritt, “The Flange for Controls System to Internet Applications”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP106, pp. XX-XX.
[n] J. D. Noland et al., “Measurement of the Diamagnetic Current on the LBNL 6.4 GHz ECR Ion Source”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT011, pp. 140-142.
[n] G. H. Gillespie, G. H. Gillespie Associates, J. F. DeFord, B. Held, and W. Hill, “Automating the Computation of Quadrupole Transfer Maps and Matrices Utilizing Electromagnetic Field Solutions”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP077, pp. 3883-3885.
[n] M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, A. Hofmann, and T. Weilbach, “Operational Experience with the HESR Electron Cooler Test Set-up”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO03, pp. 100-102.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Martínez Samblas, E. Calvo Giraldo, M. Gonzalez-Berges, and M. Krupa, “Python Expert Applications for Large Beam Instrumentation Systems at CERN”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP061, pp. 1460-1464.
- S. Assadi, “Adaptable Machine Protection Architecture for CW, High Intensity Accelerators”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3402-3404.
- K. Yamada, “Upgrade and Current Status of High-Frequency Systems for RIKEN Ring Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOAI02, pp. 6-11.
- F. Simoens and A. France, “Tuning Procedure of The 5 MeV IPHI RFQ”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH486, pp. 794-796.
- J. Bengtsson, “Ultra Low Emittance Light Sources”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUXM01, pp. 988-992.
- F. Eozenou, C. Z. Antoine, A. Aspart, S. Berry, J. F. Denis, and B. Malki, “Efficiency of Electropolishing versus Bath Composition and Aging: First Results”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP02, pp. 451-454.
- G. Kraft et al., “First Patient Treatment at GSI with Heavy Ions”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper FRX02A, pp. 212-216.
- K. A. Brown, M. Harvey, Y. C. Jing, P. K. Kankiya, and S. Seletskiy, “Online Simulation Framework Through HTTP Services”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 734-738.
- W. Namkung, “Linac R&D in Korea”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper FR1002, pp. 1026-1030.
- H. Karadeniz, E. Recepoglu, and S. Sultansoy, “QCD Explorer Based eA and A Colliders”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP051, pp. 2635-2637.
- W. M. Fawley, G. Penn, A. Sessler, and J. S. Wurtele, “Studies of the Front End of a Neutrino Factory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC011, pp. 748-750.
- D. Giove, P. Gmaj, L. Lo Monaco, G. Raia, and L. Rossi, “Test and Calibration of the Magnetic Measurement System for the Superconducting Cyclotron at LNS, Catania”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 936-939.
- Y. J. Yuan et al., “Status and Upgrades of HIRFL”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUM1I01, pp. 110-114.
- G. Broggi, A. Abramov, M. Boscolo, R. Bruce, R. Kersevan, and S. Redaelli, “Beam losses due to beam-residual gas interactions in the FCC-ee”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM036, pp. 390-393.
- R. Klein, R. Thornagel, and G. Ulm, “BESSY II Operated as a Primary Source Standard”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOBLH03, pp. 273-275.
- V. Litvinenko, “Future Electron-Hadron Colliders”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEXMH02, pp. 2364-2368.
- K. O. Thielheim, “Particle Acceleration in Electromagnetic Wave Fields”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 951-954.
- J. A. Crittenden and S. Wang, “Comparison of Transfer Map Derivation Methods for Static Magnetic Fields”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 799-801.
- V. G. Dudnikov et al., “Positive and Negative Ions Radio Frequency Sources with Solenoidal Magnetic Field”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 799-802.
- J. Barranco and Y. Papaphilippou, “Efficiency and Robustness of the PS2 Collimation System”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC01, pp. 259-261.
- C. Xu, M. J. Kelley, and C. E. Reece, “SRF Cavity Surface Topography Characterization Using Replica Techniques”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC093, pp. 3497-3499.
- Y. B. Leng, Z. C. Chen, Y. B. Yan, and R. X. Yuan, “Beam Diagnostics Global Data Warehouse Implementation and Application at SSRF”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC116, pp. 1287-1289.
- W.-Y. Lin, T.-W. Hsu, B.-Y. Huang, C.-Y. Hung, T.-Y. Lee, and H.-J. Tsai, “Development of a real-time waveform monitoring system for pulsed power supplies at Taiwan photon source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6691, this conference.
- L. Monaco et al., “Application of In-Vacuum Infrared Pyrometry During Fabrication of European XFEL Niobium Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP062, pp. 570-574.
- Y. Zhang, Z. Liu, and R. Remec, “ISOL Target-Vapor Transport System Simulations”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP028, pp. 2850-2852.
- B. Rusnak et al., “Superconducting Multicell Cavity Development Program at Los Alamos”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1021-1024.
- J. T. Collins, H. Cease, S. J. Izzo, Z. Liu, J. Nudell, and C. A. Preissner, “Preliminary Design of the Magnet Support and Alignment Systems for the Aps-U Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 87-89.
- R. I. Farnsworth, C. A. Myers, and A. C. Starritt, “The Flange for Controls System to Internet Applications”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP106, pp. XX-XX.
- J. D. Noland et al., “Measurement of the Diamagnetic Current on the LBNL 6.4 GHz ECR Ion Source”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUPOT011, pp. 140-142.
- G. H. Gillespie, G. H. Gillespie Associates, J. F. DeFord, B. Held, and W. Hill, “Automating the Computation of Quadrupole Transfer Maps and Matrices Utilizing Electromagnetic Field Solutions”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP077, pp. 3883-3885.
- M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, A. Hofmann, and T. Weilbach, “Operational Experience with the HESR Electron Cooler Test Set-up”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO03, pp. 100-102.
Back to search