Favourites
For Word
[n] R. I. Cutler, J. Owen, and J. Whittaker, “Performance of Wire Scanner Beam Profile Monitors to Determine the Emittance and Position of High Power CW Electron Beams of the NBS-Los Alamos Racetrack Microtron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 625-628.
[n] B. T. Matthias, “Magnetization Curves of Superconductors - Type I, Type II and Type III”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper D02, pp. 90-92.
[n] K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2541-2544. doi:10.18429/JACoW-IPAC2018-WEPMF073
[n] Y. Takashima et al., “Present Status of Accelerators in Aichi Synchrotron Radiation Center”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2877-2879. doi:10.18429/JACoW-IPAC2016-WEPOW023
[n] F. Poulet, “Optimization of EPURE LINAC performances and time characterization using electronic/photonic focal spot size correlation”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL069, unpublished.
[n] S. Sanaye Hajari, S. Doebert, and H. Shaker, “Beam Dynamics Studies of the CLIC Drive Beam Injector”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP034, pp. 131-133.
[n] C. Cheng et al., “A New Method of Acquiring Fast Beam Transversal Profile in the Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME039, pp. 556-558.
[n] T. Shidara, S. Anami, A. Asami, H. Honma, and K. Nakao, “Microwave Source Upgrade of the KEK 2.5-GeV Linac Relevant to B-Factory Project”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO443, pp. 165-167.
[n] V. L. Auslender, A. A. Bryazgin, A. M. Gonchar, M. V. Korobeynikov, V. I. Serbin, and L. A. Voronin, “Experience of Electron Beam Treatment For Sterilization of Disposal Medical Goods and in Other Medical and Biological Applications”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D058, pp. 816-818.
[n] B. Terzic et al., “Long-Term Simulations of Beam-Beam Dynamics on GPUs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3918-3920. doi:10.18429/JACoW-IPAC2017-THPAB086
[n] H. Weise, “How To Produce 100 Superconducting Modules for the European XFEL in Collaboration and with Industry”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1923-1928. doi:10.18429/JACoW-IPAC2014-WEIB03
[n] W. Guo, S. Krinsky, and L. Yang, “NSLS-II Lattice Optimization with Non-zero Chromaticity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA076, pp. 2663-2665.
[n] P. Snopok and E. Overton, “The Status of the Construction of MICE Step IV”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1364-1366. doi:10.18429/JACoW-IPAC2014-TUPME011
[n] L. C. Deacon et al., “Development of a Spectrometer for Proton Driven Plasma Wakefield Accelerated Electrons at AWAKE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2601-2604. doi:10.18429/JACoW-IPAC2015-WEPWA045
[n] D. Zhou et al., “Impedance Calculation and Simulation of Microwave Instability for the Main Rings of SuperKEKB”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1600-1602. doi:10.18429/JACoW-IPAC2014-TUPRI021
[n] C. J. Kost and G. H. Mackenzie, “Extraction of a Beam Made up of Two Spatially Separate Components”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-31, pp. 493-495.
[n] C. Feng, D. Wang, and Z. T. Zhao, “Study of the Energy Chirp Effects on Seeded FEL Schemes at SDUV-FEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP056, pp. 1724-1726.
[n] A. A. Lutman et al., “XFEL Operational Flexibility due to the Dechirper System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2219-2223. doi:10.18429/JACoW-IPAC2019-WEXPLM1
[n] J. W. McKenzie and B. L. Militsyn, “Initial Design of a Superconducting RF Photoinjector Option for the UK's New Light Source Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC016, pp. 1746-1748.
[n] N. Hayashi et al., “Injection Energy Recovery of J-PARC RCS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS096, pp. 2730-2732.
[n] V. Vogel et al., “Operation of an L-band RF Gun with Pulses Inside the Burst Mode RF Pulse”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC111, pp. 3146-3148.
For LaTeX
Use Complete Form
For BibTeX
References
- R. I. Cutler, J. Owen, and J. Whittaker, “Performance of Wire Scanner Beam Profile Monitors to Determine the Emittance and Position of High Power CW Electron Beams of the NBS-Los Alamos Racetrack Microtron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 625-628.
- B. T. Matthias, “Magnetization Curves of Superconductors - Type I, Type II and Type III”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper D02, pp. 90-92.
- K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2541-2544.
- Y. Takashima et al., “Present Status of Accelerators in Aichi Synchrotron Radiation Center”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2877-2879.
- F. Poulet, “Optimization of EPURE LINAC performances and time characterization using electronic/photonic focal spot size correlation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL069, unpublished.
- S. Sanaye Hajari, S. Doebert, and H. Shaker, “Beam Dynamics Studies of the CLIC Drive Beam Injector”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP034, pp. 131-133.
- C. Cheng et al., “A New Method of Acquiring Fast Beam Transversal Profile in the Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME039, pp. 556-558.
- T. Shidara, S. Anami, A. Asami, H. Honma, and K. Nakao, “Microwave Source Upgrade of the KEK 2.5-GeV Linac Relevant to B-Factory Project”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO443, pp. 165-167.
- V. L. Auslender, A. A. Bryazgin, A. M. Gonchar, M. V. Korobeynikov, V. I. Serbin, and L. A. Voronin, “Experience of Electron Beam Treatment For Sterilization of Disposal Medical Goods and in Other Medical and Biological Applications”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D058, pp. 816-818.
- B. Terzic et al., “Long-Term Simulations of Beam-Beam Dynamics on GPUs”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3918-3920.
- H. Weise, “How To Produce 100 Superconducting Modules for the European XFEL in Collaboration and with Industry”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1923-1928.
- W. Guo, S. Krinsky, and L. Yang, “NSLS-II Lattice Optimization with Non-zero Chromaticity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA076, pp. 2663-2665.
- P. Snopok and E. Overton, “The Status of the Construction of MICE Step IV”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1364-1366.
- L. C. Deacon et al., “Development of a Spectrometer for Proton Driven Plasma Wakefield Accelerated Electrons at AWAKE”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2601-2604.
- D. Zhou et al., “Impedance Calculation and Simulation of Microwave Instability for the Main Rings of SuperKEKB”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1600-1602.
- C. J. Kost and G. H. Mackenzie, “Extraction of a Beam Made up of Two Spatially Separate Components”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-31, pp. 493-495.
- C. Feng, D. Wang, and Z. T. Zhao, “Study of the Energy Chirp Effects on Seeded FEL Schemes at SDUV-FEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP056, pp. 1724-1726.
- A. A. Lutman et al., “XFEL Operational Flexibility due to the Dechirper System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2219-2223.
- J. W. McKenzie and B. L. Militsyn, “Initial Design of a Superconducting RF Photoinjector Option for the UK's New Light Source Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC016, pp. 1746-1748.
- N. Hayashi et al., “Injection Energy Recovery of J-PARC RCS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS096, pp. 2730-2732.
- V. Vogel et al., “Operation of an L-band RF Gun with Pulses Inside the Burst Mode RF Pulse”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC111, pp. 3146-3148.
Back to search