JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	K. Kanazawa and H. Fukuma, “Measurement of the Electron Cloud Density in a Solenoid Coil and a Quadrupole Magnet at KEKB LER”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD041, pp. 2015-2017. 
[n]	N. R. Neveu et al., “Benchmark of RF Photoinjector and Dipole Using ASTRA, GPT, and OPAL”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1194-1196. doi:10.18429/JACoW-NAPAC2016-THPOA46
[n]	P. Datte et al., “Electrical Design Considerations for a 40MHz Gas Ionization Chamber”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH046, pp. 1327-1329. 
[n]	Ph. Guid?®e and J. Peyromaure, “A New Approach for High-Power Solid-State Drivers Used for Wide-Band RF Acceleration”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-10, pp. 180-183. 
[n]	F. Zimmermann, M. Koratzinos, A. P. Blondel, and M. Zanetti, “LEP3: A High Luminosity e+e- Collider in the LHC Tunnel to Study the Higgs Boson”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR078, pp. 2005-2007. 
[n]	G. N. Kim et al., “Pohang Neutron Facility Based on Electron Linear Accelerator”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP518, pp. XX-XX. 
[n]	C. P. Welsch, “Accelerator Optimization Through Beam Diagnostics”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 391-394. doi:10.18429/JACoW-IBIC2016-TUPG28
[n]	V. Tympel et al., “The Next Generation of Cryogenic Current Comparators for Beam Monitoring”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 441-444. doi:10.18429/JACoW-IBIC2016-TUPG43
[n]	S. Yakovenko et al., “Electron Cooler for the NICA Collider”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO08, pp. 113-115. 
[n]	A. Saini, J.-P. Carneiro, B. M. Hanna, L. R. Prost, A. V. Shemyakin, and V. L. Sista, “Beam Optics Measurements in Medium Energy Beam Transport at PIP-II Injector Test Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 909-912. doi:10.18429/JACoW-IPAC2018-TUPAF077
[n]	J. K. Munro, J. E. Cleaves, E. L. Williams, D. J. Nypaver, K. U. Kasemir, and R. D. Meyer, “Use of EPICS For High-Level Control of SNS Conventional Facilities”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP030, pp. XX-XX. 
[n]	N. R. Stevenson et al., “A Remotely Controlled Robotic Vehicle for Work Within Radioactive Environments”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IV-12, pp. 198-201. 
[n]	S. Setzer et al., “Investigation of Dark Currents in the S-DALINAC Superconducting Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG058, pp. 3569-3571. 
[n]	O. A. Anderson and L. Soroka, “Emittance Growth in Intense Mismatched Beams”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1043-1046. 
[n]	L. Dahl and J. Klabunde, “On the Performance of Computer Automatic Tuning at the Unilac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2153-2156. 
[n]	T. Fujino et al., “Status of the Seamless L-Band Cavity Fabrication at KEK”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F37, pp. 741-745. 
[n]	A. Schick and D. L. Rubin, “Beam-Beam Performance as a Function of betaupsilon at CESR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 470-473. 
[n]	J. S. Hangst et al., “Laser Cooling of Stored Beams in ASTRID”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1764-1767. 
[n]	S. Dastan, S. Livinov, J. Rahighi, R. Saffari, and M. Steck, “The ESR Closed Orbit  Calculation and Simulation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3349-3351. doi:10.18429/JACoW-IPAC2019-WEPTS100
[n]	F. F. Bertinelli et al., “Design and Fabrication of Superfluid Helium Heat Exchanger Tubes for the LHC Superconducting Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT010, pp. 1837-1839. 
[n]	W. R. Flavell, “Functional Materials Development using Accelerator-based Light Sources: Current Capabilities and Future Prospects”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEIC04, pp. 2156-2160. 
[n]	R. Kose, “Status of the HERA-Project”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 29-34. 
[n]	J. E. Spencer, “Internal Targets in Storage Rings”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1758-1761. 
[n]	S. A. Gavrilov, D. A. Chermoshentsev, and A. Feschenko, “Development, Fabrication and Laboratory Tests of Bunch Shape Monitors for ESS Linac”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 407-409. doi:10.18429/JACoW-IBIC2018-WEPA17
[n]	G. Besnier, J. Jacob, P. Kernel, R. Nagaoka, J.-L. Revol, and A. Ropert, “Experimental and Theoretical Studies of Transverse Single Bunch Instabilities at ESRF”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP05G, pp. 999-1001. 
[n]	V. Bechtold, P. Fehsenfeld, and H. Schweickert, “Industrial Applications of the Karlsruhe Compact Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-02, pp. 593-596. 
[n]	L. R. Ives et al., “200 kW CW, 350 MHz Multiple Beam Inductive Output Tube”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO08, pp. 946-947. 
[n]	N. R. Lobanov and D. C. Weisser, “Status Report on RFSC ANU”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP002, pp. 124-128. 
[n]	K. J. Gofron, Y. Q. Cai, D. S. Coburn, and A. Suvorov, “Temperature Control of Crystal Optics for Ultrahigh-Resolution Applications”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 899-902. doi:10.18429/JACoW-ICALEPCS2023-TUPDP132
[n]	R. Miyamoto et al., “ESS Low Energy Beam Transport Tuning During the First Beam Commissioning Stage”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1046-1049. doi:10.18429/JACoW-IPAC2019-MOPTS084
[n]	D. A. Judd, L. J. Kettle, H. Menown, B. P. Newton, N. S. Nicholls, and R. Sheldrake, “Modern Thyratron Crowbar Protection Systems”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1600-1603. 
[n]	G. R. D. Plateau et al., “Experimental Demonstration of Ultrashort J-Class Pulses in the Terahertz Regime from a Laser Wakefield Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP138, pp. 2818-2820. 
[n]	A. Sargsyan, V. Sahakyan, and W. Decking, “Parallel Operation of SASE1 and SASE3 Undulator Sections of European XFEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2554-2556. doi:10.18429/JACoW-IPAC2017-WEPAB001
[n]	S. Aumon, S. S. Gilardoni, O. Hans, and F. C. Peters, “Study of Beam Losses at Injection in the CERN Proton Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP034, pp. 3775-3777. 
[n]	A. Endo, K. Sakaue, M. Washio, and H. Mizoguchi, “Optimization of High Average Power FEL Beam for EUV Lithography Application”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper FRA04, pp. 990-992. 
[n]	Y. Yang et al., “FPGA Based Optical Phase Control for Coherent Laser Pulse Stacking”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2265-2267. doi:10.18429/JACoW-IPAC2018-WEPAL041
[n]	S. Fukuda et al., “Status of RF Sources in Super-Conducting RF Test Facility (STF) at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP086, pp. 1032-1034. 
[n]	R. Appio, P. Craievich, G. Penco, and M. Veronese, “Absolute Bunch Length Measurements at Fermi@ELETTRA FEL”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUAL3, pp. 312-315. 
[n]	Z. Zaharieva and R. Billen, “Rapid Development of Database Interfaces with Oracle APEX, Used for the Controls Systems at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP108, pp. 883-885. 
[n]	R. P. Wells, B. Ghiorso, F. Sannibale, J. W. Staples, and T. M. Huang, “Design and Fabrication of a VHF - CW High Repetition Rate Electron Gun”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 733-735. doi:10.18429/JACoW-IPAC2014-MOPRI056
[n]	S. J. Cooke, B. Levush, A. N. Vlasov, T. M. Antonsen, and I. A. Chernyavskiy, “GPU-Accelerated 3D Time-Domain Simulation of RF Fields and Particle Interactions”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP156, pp. 1779-1781. 
[n]	S. Srinivasan and P.-A. Duperrex, “Reentrant Cavity Resonator for Low Intensities Proton Beam Measurements”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2341-2344. doi:10.18429/JACoW-IPAC2018-WEPAL069
[n]	M. J. Barnes, O. Bjorkqvist, L. Jensen, and O. A. Nielsen, “Electromagnetic Modelling of Kicker Magnets to Derive Equivalent Circuits”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3506-3509. doi:10.18429/JACoW-IPAC2021-WEPAB346
[n]	O. I. Meshkov et al., “Development of the Methods of Beam Energy Spread Determination in the VEPP-4M Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC067, pp. 1209-1211. 
[n]	S. H. Kim, C. Doose, and Y. Ivanyushenkov, “Magnetic Field Measurement System for Superconducting Undulators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP081, pp. 321-323. 
[n]	M. C. Lara and H. E. Brooks, “LLL 100-MeV Electron Linac:  Design Considerations and Performance of the Beam-Transport Vacuum System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1609-1613. 
[n]	G. Tosin, R. Bas?¡lio, S. Casas, and R. J. F. Marcondes, “Bending Magnets Made with Permanent Magnets for the LNLS-2 Electron Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP001, pp. 127-129. 
[n]	F. Amiranoff et al., “Observation of Resonance in Beat-Wave Experiments with Nd Lasers”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 599-602. 
[n]	T. H. Fieguth, “The Optical Design of the Spin Manipulation System for the SLAC Linear Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 885-888. 
[n]	A. A. Mikhailichenko, “To the Quantum Limitations in Beam Physics”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA97, pp. 2814-2816. 
[n]	A. R. D. Rodrigues et al., “Sirius Status Update”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1381-1384. doi:10.18429/JACoW-IPAC2019-TUPGW003
[n]	F. Yan, H. Geng, C. Meng, H. F. Ouyang, S. Pei, and Y. L. Zhao, “ADS Injector I Frequency Choice at IHEP”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 265-268. doi:10.18429/JACoW-IPAC2015-MOPWA061
[n]	G. Wright et al., “Recent Changes to Beamline Software at the Canadian Light Source”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC100, pp. 813-815. 
[n]	C. Li et al., “Timing System Upgrade for Top-off Operation of HLS-II”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 612-614. doi:10.18429/JACoW-ICALEPCS2017-TUPHA086
[n]	D. A. Ovsyannikov, V. V. Altsybeyev, A. P. Durkin, and Y. A. Svistunov, “Acceleration of the Multicharged Ions with Different A/Z Ratios in Single RFQ Channel without Magnetic Field Focusing”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 308-310. doi:10.18429/JACoW-RUPAC2018-WEPSB12
[n]	T. Szymocha et al., “SOLARIS Digital User Office”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 873-875. doi:10.18429/JACoW-ICALEPCS2017-TUPHA188
[n]	S. Roy Chaudhuri, H. Hayatnagarkar, and S. Natarajan, “Integrated Monitoring and Control Specification Environment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOBAB06, pp. 47-50. 
[n]	R. A. Phillips, M. P. J. Gaudreau, M. K. Kempkes, B. E. Simpson, and J. A. Casey, “Affordable, Short Pulse MARX Modulator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA065, pp. 828-830. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search