Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Sato et al., “A Control System of the Slow-extraction Beam Lines in the JPARC Project”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP516, pp. XX-XX.
[n] Klinger V., “A New HERA Cryogenic Control System - Requirements and Objectives”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1O02, pp. XX-XX.
[n] P. Li, M. Li, D. Wu, Z. Xu, and X. Yang, “Research of Emittance Compensation of CAEP CW DC-Gun Photoinjector”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA21, pp. 377-380.
[n] D. Bafia, “Application of accelerator technology to quantum information science”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEYD03, unpublished.
[n] E. Ritter et al., “Implementation of a Superconducting Electron Beam Ion Source into the HIT Ion Source Test Bench”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2153-2155. doi:10.18429/JACoW-IPAC2014-WEPRO083
[n] L. Wang et al., “Observation of Beam Ion Instability in SPEAR3”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS090, pp. 814-816.
[n] N. F. Petry, M. Busch, K. K??mpel, O. Meusel, and H. Podlech, “Further Designs of HOM Couplers for Superconducting 400 MHz RF Cavities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4132-4134. doi:10.18429/JACoW-IPAC2019-THPTS013
[n] S. M. Liuzzo, M. E. Biagini, P. Raimondi, T. Demma, and Y. Papaphilippou, “Frequency Map Analysis for SuperB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC073, pp. 1341-1343.
[n] V. Balandin, R. Brinkmann, W. Decking, and N. Golubeva, “Twiss Parameters of Coupled Particle Beams with Equal Eigenemittances”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC008, pp. 1167-1169.
[n] B. X. Yang, J. L. Bailey, S. J. Stein, and D. R. Walters, “Design of a High-Resolution Optical Transition Radiation Imager System for the Linac Coherent Light Source Undulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT087, pp. 4209-4211.
[n] M. A. Bakr et al., “Comparison between Hexaboride Materials for Thermionic Cathode RF Gun”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC029, pp. 1782-1784.
[n] R. Calaga, S. A. Belomestnykh, I. Ben-Zvi, and Q. Wu, “A Quarter Wave Design for Crab Crossing in the LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC027, pp. 2260-2262.
[n] S. Molloy and R. Ainsworth, “Discussion of the Optimisation of a Linac Lattice to Minimise Disruption by a Class of Parasitic Modes”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB048, pp. 585-587.
[n] M. Notani, C. M. Ankenbrandt, R. P. Johnson, T. J. Roberts, and C. Bowman, “Handling GEM*STER Volatile Radioactive Fission Products”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR062, pp. 4115-4117.
[n] A. Borysenko et al., “Electro-optical Bunch Length Monitor for FLUTE: Layout and Simulations”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3527-3529. doi:10.18429/JACoW-IPAC2014-THPME123
[n] P. H. Williams, D. Angal-Kalinin, J. K. Jones, M. Eriksson, S. Thorin, and S. Werin, “Tolerance Studies of the Max-IV Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC067, pp. 3047-3049.
[n] A. Asami et al., “Injector of the Positron Generator”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-25, pp. 496-498.
[n] Y. Renier et al., “Latest News on High Average RF Power Operation at PITZ”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 59-61. doi:10.18429/JACoW-LINAC2016-MOOP08
[n] W. Scandale et al., “Optimization of the Even Normal Multipole Components in the Main Dipole of the Large Hadron Collider”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE014, pp. 2427-2429.
[n] F. Marti, P. Miller, D. Poe, M. Steiner, J. Stetson, and X. Y. Wu, “Commissioning of the Coupled Cyclotron System at NSCL”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper B-2, pp. XX-XX.
[n] R. Li, S. Q. Tan, W. F. Wu, and R. N. Xu, “A High-Performance Digital Controller based on Ethernet Interface for Accelerator Power Supply”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 501-503. doi:10.18429/JACoW-IPAC2014-MOPME057
[n] C. Pagani, “A High Current Proton Linac with 352 MHz SC Cavities”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP23, pp. 107-109.
[n] Y. Taira, H. Kato, R. Kuroda, and H. Toyokawa, “Development of a C-band RF Gun with a Coniferous-tree-type Carbon Nanostructure Field Emission Cathode”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2545-2547. doi:10.18429/JACoW-IPAC2015-WEPWA024
[n] Yu. D. Kliuchevskaia, S. M. Polozov, A. Aryshev, M. Shevelev, N. Terunuma, and J. Urakawa, “Pre-bunched Electron Beam Emittance Simulation and Measurement”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1864-1866. doi:10.18429/JACoW-IPAC2016-TUPOW045
[n] T. Lamb et al., “Characterization of the Engineered Photodiode-based Fiber Link Stabilization Scheme for Optical Synchronization Systems”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD049, pp. 2627-2629.
[n] C. J. Metzger-Kraus, M. Abo-Bakr, B. C. Kuske, and A. Adelmann, “Latest Improvements of OPAL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3058-3060. doi:10.18429/JACoW-IPAC2016-WEPOY034
[n] S. Paret et al., “Measurement and Simulation of Luminosity Leveling in LHC via Beam Separation”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO1C06, pp. 451-455.
[n] E. Marin et al., “Status of the ATF2 Lattices”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC016, pp. 1027-1029.
[n] R. Heuer, “Physics Results at the LHC and Implications for Future HEP Programmes”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper FRYCP01, pp. 4190-4194.
[n] G. Stancari et al., “Development of hollow electron beams for proton and ion collimation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB076, pp. 1698-1700.
[n] K. Nanbu et al., “Development Status of Linear Focal Cherenkov Ring Camera”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 152-154. doi:10.18429/JACoW-IPAC2016-MOPMB029
[n] A. Ushakov, F. Dietrich, S. Riemann, T. Rublack, and P. Sievers, “Radiative Cooled Target for the ILC Polarized Positron Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1526-1528. doi:10.18429/JACoW-IPAC2015-TUPWA048
[n] B. S. Zerbe and P. M. Duxbury, “Mean-Field Density Evolution of Bunched Particles With Non-Zero Initial Velocity”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 233-239. doi:10.18429/JACoW-ICAP2018-TUPAF20
[n] R. L. Gluckstern, R. K. Cooper, and R. Li, “Electric Polarizability and Magnetic Susceptibility of Small Holes in a Thin Screen”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 88-91.
[n] B. Copy, M. Br?ñger, A. Papageorgiou Koufidis, E. Piselli, and I. Prieto Barreiro, “Integrating IoT Devices Into the CERN Control and Monitoring Platform”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1389. doi:10.18429/JACoW-ICALEPCS2019-WEPHA125
[n] S. P. Virostek, M. A. Green, T. O. Niinikoski, H. Pan, S. Prestemon, and R. Preece, “Final Assembly and Testing of the MICE Superconducting Spectrometer Solenoids”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC035, pp. 3362-3364.
[n] J. P. H. Sladen et al., “Automatic Conditioning of the CTF3 RF System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH144, pp. 1355-1357.
[n] L. Arnaudon, M. D. Disdier, P. M. Maesen, and M. P. Prax, “Control of the LHC 400 MHz RF System (ACS)”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT004, pp. 533-535.
[n] D. Gonnella, M. Liepe, and S. Posen, “Quench Studies of a Superconducting RF Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC071, pp. 2375-2377.
[n] E. Cormier-Michel et al., “Predictive Design and Interpretation of Colliding Pulse Injected Laser Wakefield Experiments”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP137, pp. 349-351.
[n] A. Bosotti et al., “Mechanical Vibration Measurements on TTF Cryomodules”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAA005, pp. 434-436.
[n] G. Kruk, O. Da Silva Alves, L. Molinari, and E. Roux, “Best Practices for Efficient Development of JavaFX Applications”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1078-1083. doi:10.18429/JACoW-ICALEPCS2017-THAPL02
[n] M. J. Barnes, L. Ducimeti?¿re, N. Garrel, B. Goddard, V. Mertens, and W. J. M. Weterings, “Analysis of Ferrite Heating of the LHC Injection Kickers and Proposals for Future Reduction of Temperature”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR090, pp. 2038-2040.
[n] T. Planche et al., “Commissioning and Early Operation of the ARIEL e-Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 12-16. doi:10.18429/JACoW-LINAC2016-MO2A03
[n] P. Cruikshank, S. D. Claudet, W. Maan, L. Mourier, A. Perrier-Cornet, and N. Provot, “Leak Tightness of LHC Cold Vacuum Systems”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS020, pp. 1566-1568.
[n] A. Hanuka et al., “Cumulative Damage of Ultrafast Laser Pulses”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4066-4069. doi:10.18429/JACoW-IPAC2016-THPOW054
[n] P. Proudlock, “Electrical Powering Strategy of LHC. First Design Study”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP021G, pp. 2320-2322.
[n] C. Liu, A. Marusic, and M. G. Minty, “Optics Measurement and Correction during Acceleration with Beta-squeeze in RHIC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1380-1383. doi:10.18429/JACoW-IPAC2015-TUBD1
[n] T. Kojima, T. Narita, K. Nishiyama, H. Sakaki, H. Takahashi, and K. Tsutsumi, “Development Status of Personnel Protection System for IFMIF/EVEDA Accelerator Prototype”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU028, pp. 1126-1129.
[n] S. G. Schubert et al., “Investigation of Laser-cleaning Process on Lead Photocathodes”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD050, pp. 1515-1517.
[n] A. Bungau, C. Bungau, R. Cywinski, P. J. C. King, and J. S. Lord, “GEANT4 Validation Studies at the ISIS Muon Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA075, pp. 247-249.
[n] T. H. Sun, G. Feng, Z. Ren, and Z.-J. Zhang, “Design of magnets for Hefei advanced light facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3677-3679. doi:10.18429/JACoW-IPAC2023-WEPM053
[n] P. Marchand et al., “Operational Experience and Upgrades of the SOLEIL Storage Ring RF System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2480-2483. doi:10.18429/JACoW-IPAC2014-WEPRI004
[n] M. A. Fedorov, G. K. Brunton, C. M. Estes, J. M. Fisher, C. D. Marshall, and E. A. Stout, “Analyzing Off-normals in Large Distributed Control Systems using Deep Packet Inspection and Data Mining Techniques”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC086, pp. 1278-1280.
[n] D. Uriot and N. Pichoff, “Status of TraceWin Code”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 92-94. doi:10.18429/JACoW-IPAC2015-MOPWA008
[n] L. D. Hansborough et al., “Fabrication and Tuning Techniques for Side-Coupled Electron Accelerator Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-36, pp. 128-130.
[n] J. Vollaire et al., “Radiation Protection Aspects of the Linac Coherent Light Source Front End Enclosure”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC23, pp. 554-557.
[n] G. Mamaev et al., “800-keV Electron Induction Injector with High Average Power”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P073, pp. 1263-1265.
[n] H.-W. Glock, M. Abo-Bakr, J. Kolbe, F. Pflocksch, A. Schaelicke, and C. Potratz, “Loss Factor and Impedance Analysis of Warm Components of BERLinPro”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 128-131. doi:10.18429/JACoW-IPAC2015-MOPWA018
[n] A. Halavanau et al., “Measurement of the Transverse Beam Dynamics in a TESLA-type Superconducting Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 323-326. doi:10.18429/JACoW-LINAC2016-MOP106018
[n] D. Proft, A. Balling, F. Frommberger, and W. Hillert, “The Beam Loss Monitoring System at ELSA”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR008, pp. 786-788.
[n] Z. C. Liu et al., “IHEP03 Fabrication and Testing Status”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO022, pp. 2364-2365.
[n] M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2594-2598. doi:10.18429/JACoW-IPAC2023-WEYD1
[n] E. Feldmeier, R. Cee, and Th. Haberer, “Operation of the LINAC and the LINAC RF System for the Ion-Beam Therapy Center Heidelberg”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP067, pp. 211-213.
[n] W. Sch?Âllkopf et al., “The New IR FEL Facility at the Fritz-Haber-Institut in Berlin”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper WEB04, pp. 629-634.
[n] J. M. Dias, N. Lopes, G. Figueira, J. T. Mendonca, and L. Oliveira e Silva, “Photon Acceleration as the Laser Wakefield Diagnostic for Future Plasma Accelerators”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA147, pp. 3725-3727.
[n] A. Nadji et al., “Operation and Performance Upgrade of the Soleil Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC044, pp. 3002-3004.
[n] M. K. Craddock, “New Concepts in FFAG Design for Secondary Beam Facilities and Other Applications”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAC003, pp. 261-265.
[n] K. Ohmi, Y. Sato, J. Takano, and S. Hatakeyama, “Measurement of Optics Errors and Space Charge Effects”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO1B03, pp. 517-521.
[n] O. Turgut et al., “Estimation of Ecloud and TMCI Driven Vertical Instability Dynamics from SPS MD Measurements - Implications for Feedback Control”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP199, pp. 1861-1863.
[n] V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818.
[n] X. Wu et al., “Beam Dynamics Studies for the Reacceleration of Low Energy RIBs at the NSCL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS053, pp. 1769-1771.
[n] C. Liu, T. Fujiwara, M. Uesaka, and J. Kusano, “Backscattering X-ray System by using 950 keV X-band Linac X-ray Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2209-2211. doi:10.18429/JACoW-IPAC2014-WEPRO104
[n] S. Schulz et al., “An Optical Cross-correlation Scheme to Synchronize Distributed Laser Systems at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC160, pp. 3366-3368.
[n] R. A. Baartman et al., “Reliable Production of Multiple High Intensity Beams with the 500 MeV TRIUMF Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper TUM1CCO03, pp. 280-282.
[n] L. R. Shen, D. K. Liu, and T. Wan, “Virtualization in Control System Environment”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU031, pp. 1138-1140.
[n] Y. Luo, W. Fischer, X. Gu, G. Robert-Demolaize, V. Schoefer, and S. M. White, “Beam-beam Simulation for the 2015 RHIC Proton Run with Electron Lenses”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1533-1535. doi:10.18429/JACoW-IPAC2016-TUPMW040
[n] M. Ries et al., “Transverse Resonance Island Buckets at the MLS and BESSY II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 138-140. doi:10.18429/JACoW-IPAC2015-MOPWA021
[n] A. Saa Hernandez, P. J. Spiller, and U. Ratzinger, “Optimization of the Sextupole Scheme and Compensation of the Time-Dependent Field Errors during Slow Extraction from the Superconducting Synchrotron SIS300”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC059, pp. 2151-2153.
[n] T. Honda et al., “Recent Development and Operational Status of PF-Ring and PF-AR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 286-288. doi:10.18429/JACoW-IPAC2014-MOPRO084
[n] R. M. Brodhage, M. Kaiser, W. Vinzenz, M. Vossberg, and U. Ratzinger, “Status of the FAIR Proton Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3702-3704. doi:10.18429/JACoW-IPAC2015-THPF011
[n] R. B. Agustsson et al., “Normal Conducting Radio Frequency X-band Deflecting Cavity Fabrication, Validation and Tuning”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI086, pp. 2899-2901.
[n] K. J. Ruisard, A. V. Aleksandrov, S. M. Cousineau, and Z. L. Zhang, “Characterization and Modeling of High-Intensity Evolution in the SNS Beam Test Facility”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 954-956. doi:10.18429/JACoW-NAPAC2019-THZBA4
[n] R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053.
[n] B. Yee-Rendon, R. Lopez-Fernandez, J. Barranco, R. Calaga, R. Tomas, and F. Zimmermann, “Fast Crab Cavity Failures in HL-LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 997-999. doi:10.18429/JACoW-IPAC2014-TUPRO003
[n] F. Albert et al., “Narrow Band Optimization of a Compton Gamma-Ray Source Produced From an X-Band Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP011, pp. 592-594.
[n] J. Skelly, T. Clifford, and R. Frankel, “A Broadband Accelerator Control Network”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2155-2158.
[n] S. Zhang et al., “PandABox: A Multipurpose Platform for Multi-technique Scanning and Feedback Applications”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 143-150. doi:10.18429/JACoW-ICALEPCS2017-TUAPL05
[n] A. A. Sahai et al., “Proton Acceleration by a Relativistic Laser Frequency-Chirp Driven Plasma Snowplow”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD059, pp. 2654-2656.
[n] P. W. van Amersfoort et al., “Felix: the Dutch Free Electron laser for Infrared Experiments”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 430-433.
[n] T. Miura et al., “Performance of RF System for Compact-ERL Main Linac at KEK”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2450-2452. doi:10.18429/JACoW-IPAC2014-WEPME073
[n] S. Casalbuoni et al., “Measurements of the Beam Heat Load in the Cold Bore Superconductive Undulator Installed at ANKA”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN024, pp. 968-970.
[n] M. Di Giacomo, P. Balleyguier, A. C. Caruso, F. Consoli, and A. Longhitano, “Experimental determination of impedance and delay time of the 100 meander transmission line for the SPIRAL2 Single Bunch Selector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS075, pp. 1710-1712.
[n] O. Boine-Frankenheim, “Accelerator Challenges of Proposed Radioactive Beam Facilities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper FRXGB001, pp. 99-103.
[n] L. Popielarski, L. J. Dubbs, K. Elliott, I. M. Malloch, R. Oweiss, and J. Popielarski, “Cleanroom Techniques to Improve Surface Cleanliness and Repeatability for SRF Coldmass Production”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC065, pp. 2357-2359.
[n] W. Vollenberg, P. Costa Pinto, B. Holliger, A. Sapountzis, and M. Taborelli, “Titanium Coating of Ceramics for Accelerator Applications”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3148-3150. doi:10.18429/JACoW-IPAC2015-WEPHA020
[n] M. A. Plum, J. Galambos, and S.-H. Kim, “Accelerator Systems Modifications for a Second Target Station at the Oak Ridge Spallation Neutron Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2140-2142. doi:10.18429/JACoW-IPAC2014-WEPRO079
[n] Y. Nishimura, K. Sakaue, T. Takahashi, M. Washio, T. Takatomi, and J. Urakawa, “Study on Two-cell RF-deflector Cavity for Ultra-short Electron Bunch Measurement”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI023, pp. 2753-2755.
[n] A. Markovik, G. P?Âplau, U. van Rienen, W. Hillert, D. Sauerland, and A. Meseck, “Dynamics of Ion Distributions in Beam Guiding Magnets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1668-1670. doi:10.18429/JACoW-IPAC2014-TUPRI046
[n] O. B. Malyshev et al., “Test Cavity and Cryostat for SRF Thin Film Evaluation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3232-3234. doi:10.18429/JACoW-IPAC2015-WEPHA052
[n] T. Margreiter, I. De Cesaris, T. Gadner, M. Incurvati, S. Pelletier, and R. Teixeira, “High-oower modular GaN based power supply for MedAustron scanning magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3739-3742. doi:10.18429/JACoW-IPAC2023-WEPM075
[n] F. Wang, F. S. He, L. Lin, and K. Zhao, “Study on the High Order Modes of the 3.5cell Cavity at Peking University”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD009, pp. 4296-4297.
[n] L. Wang et al., “The Upgrade Project of Hefei Light Source (HLS)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA043, pp. 2588-2590.
[n] S. Posen and M. Liepe, “Measurement of the Mechanical Properties of Superconducting Cavities During Operation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC081, pp. 2399-2401.
[n] Y. Papaphilippou et al., “Conceptual Design of the CLIC damping rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC086, pp. 1368-1370.
[n] C. Vaccarezza et al., “Optimization Studies for the Beam Dynamic in the RF Linac of the ELI-NP Gamma Beam System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1850-1853. doi:10.18429/JACoW-IPAC2016-TUPOW041
[n] M. Wang, T. R. Bieler, D. Kang, and C. Compton, “Characterization of Microstructural Defects in SRF Cavity Niobium using Electron Channeling Contrast Imaging”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 792-796. doi:10.18429/JACoW-SRF2017-THPB027
[n] J. G. Wang, D. Kehne, M. Reiser, D. X. Wang, T. Shea, and E. Boggasch, “Induction Acceleration Module for Maryland Pulse Compression Experiment”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH430, pp. 668-670.
[n] Y. Shobuda, P. K. Saha, M. Yamamoto, Y. H. Chin, Y. Irie, and T. Toyama, “The Kicker Impedance and its Effect on the RCS in J-PARC”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO2AB02, pp. 369-373.
[n] R. J. Jones, “Recent Progress on the ORNL Mc2 Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63G03, pp. XX-XX.
[n] P. D. Hermes, R. Bruce, J. M. Jowett, and S. Redaelli, “Betatron Cleaning for Heavy Ion Beams with IR7 Dispersion Suppressor Collimators”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2057-2059. doi:10.18429/JACoW-IPAC2015-TUPTY025
[n] M. Fitterer et al., “LHeC Lattice Design”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ014, pp. 3714-3716.
[n] C. Hovater et al., “Operational Experience With CW High Gradient and High QL Cryomodules”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THIOC03, pp. 834-838.
[n] L. Yang et al., “Research on the New Cavity Structure of RFQ Accelerator With Bent Vanes at IMP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 802-804. doi:10.18429/JACoW-LINAC2018-THPO050
[n] D. M. Zhou, K. Ohmi, and K. Oide, “CSR Impedance for an Ultrarelativistic Beam moving in a Curved Trajectory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC108, pp. 2268-2270.
[n] G. R. S. Franco et al., “Upgrading the LNLS Control System from a Proprietary to a Commercial Communications Environment”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT003, pp. 530-532.
[n] S. G. Schubert et al., “Influence of Growth Method on K3Sb Photocathode Structure and Performance”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 624-626. doi:10.18429/JACoW-IPAC2014-MOPRI018
[n] S. Braccini, A. Ereditato, P. Scampoli, and K. von Bremen, “The New Bern Cyclotron Laboratory for Radioisotope Production and Research”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS080, pp. 3618-3620.
[n] R. Li, H. G. Chen, D. M. Li, S. L. Lu, T. J. Shen, and D. X. Wang, “Ramping Power Supplies for the SSRF Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP123, pp. 3646-3648.
[n] A. Miyamoto, H. Hara, K. Kanaoka, K. Okihira, K. Sennyu, and T. Yanagisawa, “MHI's Production Activities of Superconducting Cavity”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB029, pp. 1141-1145.
[n] H. Geng et al., “Emittance Measurement with Wire Scanners at CADS MEBT1”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3575-3577. doi:10.18429/JACoW-IPAC2014-THPME139
[n] C. Meng et al., “The Progress in Physics Design of HEPS LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1008-1011. doi:10.18429/JACoW-IPAC2019-MOPTS067
[n] J. D. Fox et al., “Development of a 4 GS/s Intra-bunch Instability Control System for the SPS - Next Steps”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1766-1768. doi:10.18429/JACoW-IPAC2014-TUPRI085
[n] G. Hoffstaetter et al., “ERL Upgrade of an Existing X-ray Facility: CHESS at CESR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF078, pp. 497-499.
[n] E. Chojnacki and S. Belomestnykh, “RF Power Coupler Performance at CESR and Study of a Multipactor Inhibited Coupler”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper THA006, pp. 560-565.
[n] A. Faus-Golfe and A. Verdier, “Dynamic Aperture Limitations of the LHC in Physics Conditions due to Low-Beta Insertions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP023L, pp. 902-904.
[n] W. Fang et al., “R&D of X-band Accelerating Structure for Compact XFEL at SINAP”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP127, pp. 715-718.
[n] T. Birke et al., “Status of the Control System for the Energy Recovery Linac BERLinPro at HZB”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 159-164. doi:10.18429/JACoW-ERL2019-FRCOXBS04
[n] S. E. Korbly, W. J. Brown, M. A. Shapiro, and R. J. Temkin, “Design of a Smith-Purcell Radiation Bunch Length Diagnostic”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH114, pp. 2347-2349.
[n] F. Schlie?ƒmann, M. Arnold, M. Dutine, J. Pforr, N. Pietralla, and M. Steinhorst, “Beam Dynamics Simulations for the Twofold ERL Mode at the S-DALINAC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 155-158. doi:10.18429/JACoW-ERL2019-FRCOXBS03
[n] A. Valishev, S. Nagaitsev, V. V. Danilov, and D. N. Shatilov, “Beam Physics of Integrable Optics Test Accelerator at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC090, pp. 1371-1373.
[n] T. Yanagisawa, H. Hara, K. Kanaoka, K. Okihira, and K. Sennyu, “Development for Mass Production of Superconducting Cavity by MHI”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2876-2878. doi:10.18429/JACoW-IPAC2015-WEPMA048
[n] M. Zaera-Sanz, S. L. Birch, A. Monera Martinez, and A. Nordt, “Design, Development and Implementation of a Highly Dependable Magnet Powering Interlock System for ESS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1045-1047. doi:10.18429/JACoW-IPAC2015-MOPTY050
[n] Y. Kim et al., “Design of Cryomoudles for RAON”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2746-2748. doi:10.18429/JACoW-IPAC2014-WEPRI106
[n] M. Tigner, “Performance of the Cornell 10 Ge V Electron Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 156-159.
[n] G. Papotti, T. Bohl, F. Follin, and U. Wehrle, “Longitudinal Beam Measurements at the LHC: The LHC Beam Quality Monitor”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ022, pp. 1852-1854.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Sato et al., “A Control System of the Slow-extraction Beam Lines in the JPARC Project”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP516, pp. XX-XX.
- Klinger V., “A New HERA Cryogenic Control System - Requirements and Objectives”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1O02, pp. XX-XX.
- P. Li, M. Li, D. Wu, Z. Xu, and X. Yang, “Research of Emittance Compensation of CAEP CW DC-Gun Photoinjector”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA21, pp. 377-380.
- D. Bafia, “Application of accelerator technology to quantum information science”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper WEYD03, unpublished.
- E. Ritter et al., “Implementation of a Superconducting Electron Beam Ion Source into the HIT Ion Source Test Bench”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2153-2155.
- L. Wang et al., “Observation of Beam Ion Instability in SPEAR3”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS090, pp. 814-816.
- N. F. Petry, M. Busch, K. K??mpel, O. Meusel, and H. Podlech, “Further Designs of HOM Couplers for Superconducting 400 MHz RF Cavities”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4132-4134.
- S. M. Liuzzo, M. E. Biagini, P. Raimondi, T. Demma, and Y. Papaphilippou, “Frequency Map Analysis for SuperB”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC073, pp. 1341-1343.
- V. Balandin, R. Brinkmann, W. Decking, and N. Golubeva, “Twiss Parameters of Coupled Particle Beams with Equal Eigenemittances”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC008, pp. 1167-1169.
- B. X. Yang, J. L. Bailey, S. J. Stein, and D. R. Walters, “Design of a High-Resolution Optical Transition Radiation Imager System for the Linac Coherent Light Source Undulator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT087, pp. 4209-4211.
- M. A. Bakr et al., “Comparison between Hexaboride Materials for Thermionic Cathode RF Gun”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC029, pp. 1782-1784.
- R. Calaga, S. A. Belomestnykh, I. Ben-Zvi, and Q. Wu, “A Quarter Wave Design for Crab Crossing in the LHC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC027, pp. 2260-2262.
- S. Molloy and R. Ainsworth, “Discussion of the Optimisation of a Linac Lattice to Minimise Disruption by a Class of Parasitic Modes”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB048, pp. 585-587.
- M. Notani, C. M. Ankenbrandt, R. P. Johnson, T. J. Roberts, and C. Bowman, “Handling GEM*STER Volatile Radioactive Fission Products”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR062, pp. 4115-4117.
- A. Borysenko et al., “Electro-optical Bunch Length Monitor for FLUTE: Layout and Simulations”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3527-3529.
- P. H. Williams, D. Angal-Kalinin, J. K. Jones, M. Eriksson, S. Thorin, and S. Werin, “Tolerance Studies of the Max-IV Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC067, pp. 3047-3049.
- A. Asami et al., “Injector of the Positron Generator”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-25, pp. 496-498.
- Y. Renier et al., “Latest News on High Average RF Power Operation at PITZ”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 59-61.
- W. Scandale et al., “Optimization of the Even Normal Multipole Components in the Main Dipole of the Large Hadron Collider”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE014, pp. 2427-2429.
- F. Marti, P. Miller, D. Poe, M. Steiner, J. Stetson, and X. Y. Wu, “Commissioning of the Coupled Cyclotron System at NSCL”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper B-2, pp. XX-XX.
- R. Li, S. Q. Tan, W. F. Wu, and R. N. Xu, “A High-Performance Digital Controller based on Ethernet Interface for Accelerator Power Supply”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 501-503.
- C. Pagani, “A High Current Proton Linac with 352 MHz SC Cavities”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP23, pp. 107-109.
- Y. Taira, H. Kato, R. Kuroda, and H. Toyokawa, “Development of a C-band RF Gun with a Coniferous-tree-type Carbon Nanostructure Field Emission Cathode”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2545-2547.
- Yu. D. Kliuchevskaia, S. M. Polozov, A. Aryshev, M. Shevelev, N. Terunuma, and J. Urakawa, “Pre-bunched Electron Beam Emittance Simulation and Measurement”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1864-1866.
- T. Lamb et al., “Characterization of the Engineered Photodiode-based Fiber Link Stabilization Scheme for Optical Synchronization Systems”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD049, pp. 2627-2629.
- C. J. Metzger-Kraus, M. Abo-Bakr, B. C. Kuske, and A. Adelmann, “Latest Improvements of OPAL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3058-3060.
- S. Paret et al., “Measurement and Simulation of Luminosity Leveling in LHC via Beam Separation”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO1C06, pp. 451-455.
- E. Marin et al., “Status of the ATF2 Lattices”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC016, pp. 1027-1029.
- R. Heuer, “Physics Results at the LHC and Implications for Future HEP Programmes”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper FRYCP01, pp. 4190-4194.
- G. Stancari et al., “Development of hollow electron beams for proton and ion collimation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB076, pp. 1698-1700.
- K. Nanbu et al., “Development Status of Linear Focal Cherenkov Ring Camera”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 152-154.
- A. Ushakov, F. Dietrich, S. Riemann, T. Rublack, and P. Sievers, “Radiative Cooled Target for the ILC Polarized Positron Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1526-1528.
- B. S. Zerbe and P. M. Duxbury, “Mean-Field Density Evolution of Bunched Particles With Non-Zero Initial Velocity”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 233-239.
- R. L. Gluckstern, R. K. Cooper, and R. Li, “Electric Polarizability and Magnetic Susceptibility of Small Holes in a Thin Screen”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 88-91.
- B. Copy, M. Br?ñger, A. Papageorgiou Koufidis, E. Piselli, and I. Prieto Barreiro, “Integrating IoT Devices Into the CERN Control and Monitoring Platform”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1389.
- S. P. Virostek, M. A. Green, T. O. Niinikoski, H. Pan, S. Prestemon, and R. Preece, “Final Assembly and Testing of the MICE Superconducting Spectrometer Solenoids”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC035, pp. 3362-3364.
- J. P. H. Sladen et al., “Automatic Conditioning of the CTF3 RF System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH144, pp. 1355-1357.
- L. Arnaudon, M. D. Disdier, P. M. Maesen, and M. P. Prax, “Control of the LHC 400 MHz RF System (ACS)”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT004, pp. 533-535.
- D. Gonnella, M. Liepe, and S. Posen, “Quench Studies of a Superconducting RF Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC071, pp. 2375-2377.
- E. Cormier-Michel et al., “Predictive Design and Interpretation of Colliding Pulse Injected Laser Wakefield Experiments”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP137, pp. 349-351.
- A. Bosotti et al., “Mechanical Vibration Measurements on TTF Cryomodules”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAA005, pp. 434-436.
- G. Kruk, O. Da Silva Alves, L. Molinari, and E. Roux, “Best Practices for Efficient Development of JavaFX Applications”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1078-1083.
- M. J. Barnes, L. Ducimeti?¿re, N. Garrel, B. Goddard, V. Mertens, and W. J. M. Weterings, “Analysis of Ferrite Heating of the LHC Injection Kickers and Proposals for Future Reduction of Temperature”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR090, pp. 2038-2040.
- T. Planche et al., “Commissioning and Early Operation of the ARIEL e-Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 12-16.
- P. Cruikshank, S. D. Claudet, W. Maan, L. Mourier, A. Perrier-Cornet, and N. Provot, “Leak Tightness of LHC Cold Vacuum Systems”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS020, pp. 1566-1568.
- A. Hanuka et al., “Cumulative Damage of Ultrafast Laser Pulses”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4066-4069.
- P. Proudlock, “Electrical Powering Strategy of LHC. First Design Study”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP021G, pp. 2320-2322.
- C. Liu, A. Marusic, and M. G. Minty, “Optics Measurement and Correction during Acceleration with Beta-squeeze in RHIC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1380-1383.
- T. Kojima, T. Narita, K. Nishiyama, H. Sakaki, H. Takahashi, and K. Tsutsumi, “Development Status of Personnel Protection System for IFMIF/EVEDA Accelerator Prototype”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU028, pp. 1126-1129.
- S. G. Schubert et al., “Investigation of Laser-cleaning Process on Lead Photocathodes”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD050, pp. 1515-1517.
- A. Bungau, C. Bungau, R. Cywinski, P. J. C. King, and J. S. Lord, “GEANT4 Validation Studies at the ISIS Muon Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA075, pp. 247-249.
- T. H. Sun, G. Feng, Z. Ren, and Z.-J. Zhang, “Design of magnets for Hefei advanced light facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM053, pp. 3677-3679.
- P. Marchand et al., “Operational Experience and Upgrades of the SOLEIL Storage Ring RF System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2480-2483.
- M. A. Fedorov, G. K. Brunton, C. M. Estes, J. M. Fisher, C. D. Marshall, and E. A. Stout, “Analyzing Off-normals in Large Distributed Control Systems using Deep Packet Inspection and Data Mining Techniques”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC086, pp. 1278-1280.
- D. Uriot and N. Pichoff, “Status of TraceWin Code”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 92-94.
- L. D. Hansborough et al., “Fabrication and Tuning Techniques for Side-Coupled Electron Accelerator Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-36, pp. 128-130.
- J. Vollaire et al., “Radiation Protection Aspects of the Linac Coherent Light Source Front End Enclosure”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC23, pp. 554-557.
- G. Mamaev et al., “800-keV Electron Induction Injector with High Average Power”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P073, pp. 1263-1265.
- H.-W. Glock, M. Abo-Bakr, J. Kolbe, F. Pflocksch, A. Schaelicke, and C. Potratz, “Loss Factor and Impedance Analysis of Warm Components of BERLinPro”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 128-131.
- A. Halavanau et al., “Measurement of the Transverse Beam Dynamics in a TESLA-type Superconducting Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 323-326.
- D. Proft, A. Balling, F. Frommberger, and W. Hillert, “The Beam Loss Monitoring System at ELSA”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR008, pp. 786-788.
- Z. C. Liu et al., “IHEP03 Fabrication and Testing Status”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO022, pp. 2364-2365.
- M. Siano et al., “Two-dimensional electron beam size measurements with X-ray Heterodyne Near Field Speckles”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEYD1, pp. 2594-2598.
- E. Feldmeier, R. Cee, and Th. Haberer, “Operation of the LINAC and the LINAC RF System for the Ion-Beam Therapy Center Heidelberg”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP067, pp. 211-213.
- W. Sch?Âllkopf et al., “The New IR FEL Facility at the Fritz-Haber-Institut in Berlin”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper WEB04, pp. 629-634.
- J. M. Dias, N. Lopes, G. Figueira, J. T. Mendonca, and L. Oliveira e Silva, “Photon Acceleration as the Laser Wakefield Diagnostic for Future Plasma Accelerators”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA147, pp. 3725-3727.
- A. Nadji et al., “Operation and Performance Upgrade of the Soleil Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC044, pp. 3002-3004.
- M. K. Craddock, “New Concepts in FFAG Design for Secondary Beam Facilities and Other Applications”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAC003, pp. 261-265.
- K. Ohmi, Y. Sato, J. Takano, and S. Hatakeyama, “Measurement of Optics Errors and Space Charge Effects”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO1B03, pp. 517-521.
- O. Turgut et al., “Estimation of Ecloud and TMCI Driven Vertical Instability Dynamics from SPS MD Measurements - Implications for Feedback Control”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP199, pp. 1861-1863.
- V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818.
- X. Wu et al., “Beam Dynamics Studies for the Reacceleration of Low Energy RIBs at the NSCL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS053, pp. 1769-1771.
- C. Liu, T. Fujiwara, M. Uesaka, and J. Kusano, “Backscattering X-ray System by using 950 keV X-band Linac X-ray Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2209-2211.
- S. Schulz et al., “An Optical Cross-correlation Scheme to Synchronize Distributed Laser Systems at FLASH”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC160, pp. 3366-3368.
- R. A. Baartman et al., “Reliable Production of Multiple High Intensity Beams with the 500 MeV TRIUMF Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper TUM1CCO03, pp. 280-282.
- L. R. Shen, D. K. Liu, and T. Wan, “Virtualization in Control System Environment”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU031, pp. 1138-1140.
- Y. Luo, W. Fischer, X. Gu, G. Robert-Demolaize, V. Schoefer, and S. M. White, “Beam-beam Simulation for the 2015 RHIC Proton Run with Electron Lenses”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1533-1535.
- M. Ries et al., “Transverse Resonance Island Buckets at the MLS and BESSY II”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 138-140.
- A. Saa Hernandez, P. J. Spiller, and U. Ratzinger, “Optimization of the Sextupole Scheme and Compensation of the Time-Dependent Field Errors during Slow Extraction from the Superconducting Synchrotron SIS300”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC059, pp. 2151-2153.
- T. Honda et al., “Recent Development and Operational Status of PF-Ring and PF-AR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 286-288.
- R. M. Brodhage, M. Kaiser, W. Vinzenz, M. Vossberg, and U. Ratzinger, “Status of the FAIR Proton Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3702-3704.
- R. B. Agustsson et al., “Normal Conducting Radio Frequency X-band Deflecting Cavity Fabrication, Validation and Tuning”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI086, pp. 2899-2901.
- K. J. Ruisard, A. V. Aleksandrov, S. M. Cousineau, and Z. L. Zhang, “Characterization and Modeling of High-Intensity Evolution in the SNS Beam Test Facility”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 954-956.
- R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053.
- B. Yee-Rendon, R. Lopez-Fernandez, J. Barranco, R. Calaga, R. Tomas, and F. Zimmermann, “Fast Crab Cavity Failures in HL-LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 997-999.
- F. Albert et al., “Narrow Band Optimization of a Compton Gamma-Ray Source Produced From an X-Band Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP011, pp. 592-594.
- J. Skelly, T. Clifford, and R. Frankel, “A Broadband Accelerator Control Network”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2155-2158.
- S. Zhang et al., “PandABox: A Multipurpose Platform for Multi-technique Scanning and Feedback Applications”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 143-150.
- A. A. Sahai et al., “Proton Acceleration by a Relativistic Laser Frequency-Chirp Driven Plasma Snowplow”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD059, pp. 2654-2656.
- P. W. van Amersfoort et al., “Felix: the Dutch Free Electron laser for Infrared Experiments”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 430-433.
- T. Miura et al., “Performance of RF System for Compact-ERL Main Linac at KEK”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2450-2452.
- S. Casalbuoni et al., “Measurements of the Beam Heat Load in the Cold Bore Superconductive Undulator Installed at ANKA”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN024, pp. 968-970.
- M. Di Giacomo, P. Balleyguier, A. C. Caruso, F. Consoli, and A. Longhitano, “Experimental determination of impedance and delay time of the 100 meander transmission line for the SPIRAL2 Single Bunch Selector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS075, pp. 1710-1712.
- O. Boine-Frankenheim, “Accelerator Challenges of Proposed Radioactive Beam Facilities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper FRXGB001, pp. 99-103.
- L. Popielarski, L. J. Dubbs, K. Elliott, I. M. Malloch, R. Oweiss, and J. Popielarski, “Cleanroom Techniques to Improve Surface Cleanliness and Repeatability for SRF Coldmass Production”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC065, pp. 2357-2359.
- W. Vollenberg, P. Costa Pinto, B. Holliger, A. Sapountzis, and M. Taborelli, “Titanium Coating of Ceramics for Accelerator Applications”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3148-3150.
- M. A. Plum, J. Galambos, and S.-H. Kim, “Accelerator Systems Modifications for a Second Target Station at the Oak Ridge Spallation Neutron Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2140-2142.
- Y. Nishimura, K. Sakaue, T. Takahashi, M. Washio, T. Takatomi, and J. Urakawa, “Study on Two-cell RF-deflector Cavity for Ultra-short Electron Bunch Measurement”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI023, pp. 2753-2755.
- A. Markovik, G. P?Âplau, U. van Rienen, W. Hillert, D. Sauerland, and A. Meseck, “Dynamics of Ion Distributions in Beam Guiding Magnets”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1668-1670.
- O. B. Malyshev et al., “Test Cavity and Cryostat for SRF Thin Film Evaluation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3232-3234.
- T. Margreiter, I. De Cesaris, T. Gadner, M. Incurvati, S. Pelletier, and R. Teixeira, “High-oower modular GaN based power supply for MedAustron scanning magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM075, pp. 3739-3742.
- F. Wang, F. S. He, L. Lin, and K. Zhao, “Study on the High Order Modes of the 3.5cell Cavity at Peking University”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD009, pp. 4296-4297.
- L. Wang et al., “The Upgrade Project of Hefei Light Source (HLS)”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA043, pp. 2588-2590.
- S. Posen and M. Liepe, “Measurement of the Mechanical Properties of Superconducting Cavities During Operation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC081, pp. 2399-2401.
- Y. Papaphilippou et al., “Conceptual Design of the CLIC damping rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC086, pp. 1368-1370.
- C. Vaccarezza et al., “Optimization Studies for the Beam Dynamic in the RF Linac of the ELI-NP Gamma Beam System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1850-1853.
- M. Wang, T. R. Bieler, D. Kang, and C. Compton, “Characterization of Microstructural Defects in SRF Cavity Niobium using Electron Channeling Contrast Imaging”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 792-796.
- J. G. Wang, D. Kehne, M. Reiser, D. X. Wang, T. Shea, and E. Boggasch, “Induction Acceleration Module for Maryland Pulse Compression Experiment”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH430, pp. 668-670.
- Y. Shobuda, P. K. Saha, M. Yamamoto, Y. H. Chin, Y. Irie, and T. Toyama, “The Kicker Impedance and its Effect on the RCS in J-PARC”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO2AB02, pp. 369-373.
- R. J. Jones, “Recent Progress on the ORNL Mc2 Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63G03, pp. XX-XX.
- P. D. Hermes, R. Bruce, J. M. Jowett, and S. Redaelli, “Betatron Cleaning for Heavy Ion Beams with IR7 Dispersion Suppressor Collimators”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2057-2059.
- M. Fitterer et al., “LHeC Lattice Design”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ014, pp. 3714-3716.
- C. Hovater et al., “Operational Experience With CW High Gradient and High QL Cryomodules”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THIOC03, pp. 834-838.
- L. Yang et al., “Research on the New Cavity Structure of RFQ Accelerator With Bent Vanes at IMP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 802-804.
- D. M. Zhou, K. Ohmi, and K. Oide, “CSR Impedance for an Ultrarelativistic Beam moving in a Curved Trajectory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC108, pp. 2268-2270.
- G. R. S. Franco et al., “Upgrading the LNLS Control System from a Proprietary to a Commercial Communications Environment”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT003, pp. 530-532.
- S. G. Schubert et al., “Influence of Growth Method on K3Sb Photocathode Structure and Performance”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 624-626.
- S. Braccini, A. Ereditato, P. Scampoli, and K. von Bremen, “The New Bern Cyclotron Laboratory for Radioisotope Production and Research”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS080, pp. 3618-3620.
- R. Li, H. G. Chen, D. M. Li, S. L. Lu, T. J. Shen, and D. X. Wang, “Ramping Power Supplies for the SSRF Booster”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP123, pp. 3646-3648.
- A. Miyamoto, H. Hara, K. Kanaoka, K. Okihira, K. Sennyu, and T. Yanagisawa, “MHI's Production Activities of Superconducting Cavity”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB029, pp. 1141-1145.
- H. Geng et al., “Emittance Measurement with Wire Scanners at CADS MEBT1”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3575-3577.
- C. Meng et al., “The Progress in Physics Design of HEPS LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1008-1011.
- J. D. Fox et al., “Development of a 4 GS/s Intra-bunch Instability Control System for the SPS - Next Steps”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1766-1768.
- G. Hoffstaetter et al., “ERL Upgrade of an Existing X-ray Facility: CHESS at CESR”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF078, pp. 497-499.
- E. Chojnacki and S. Belomestnykh, “RF Power Coupler Performance at CESR and Study of a Multipactor Inhibited Coupler”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper THA006, pp. 560-565.
- A. Faus-Golfe and A. Verdier, “Dynamic Aperture Limitations of the LHC in Physics Conditions due to Low-Beta Insertions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP023L, pp. 902-904.
- W. Fang et al., “R&D of X-band Accelerating Structure for Compact XFEL at SINAP”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP127, pp. 715-718.
- T. Birke et al., “Status of the Control System for the Energy Recovery Linac BERLinPro at HZB”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 159-164.
- S. E. Korbly, W. J. Brown, M. A. Shapiro, and R. J. Temkin, “Design of a Smith-Purcell Radiation Bunch Length Diagnostic”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH114, pp. 2347-2349.
- F. Schlie?ƒmann, M. Arnold, M. Dutine, J. Pforr, N. Pietralla, and M. Steinhorst, “Beam Dynamics Simulations for the Twofold ERL Mode at the S-DALINAC”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 155-158.
- A. Valishev, S. Nagaitsev, V. V. Danilov, and D. N. Shatilov, “Beam Physics of Integrable Optics Test Accelerator at Fermilab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC090, pp. 1371-1373.
- T. Yanagisawa, H. Hara, K. Kanaoka, K. Okihira, and K. Sennyu, “Development for Mass Production of Superconducting Cavity by MHI”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2876-2878.
- M. Zaera-Sanz, S. L. Birch, A. Monera Martinez, and A. Nordt, “Design, Development and Implementation of a Highly Dependable Magnet Powering Interlock System for ESS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1045-1047.
- Y. Kim et al., “Design of Cryomoudles for RAON”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2746-2748.
- M. Tigner, “Performance of the Cornell 10 Ge V Electron Synchrotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 156-159.
- G. Papotti, T. Bohl, F. Follin, and U. Wehrle, “Longitudinal Beam Measurements at the LHC: The LHC Beam Quality Monitor”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ022, pp. 1852-1854.
Back to search