Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Aladwan, A. Bertrand, M. Dach, S. Hunt, R. Krempaska, and E. Zimoch, “Image Acquisition and Processing at the Swiss Light Source”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_095.
[n] D. Horan and G. J. Waldschmidt, “Performance of the 352-MHz 4-kW CW Solid State RF Power Amplifier System using 1-kW Push-pull Devices”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP123, pp. 1059-1061.
[n] K. Furukawa, J. Chiba, N. Kamikubota, and H. Nakagawa, “Implementation of the EPICS Device Support for Network Based Controllers”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP066, pp. XX-XX.
[n] E. W. Hoffman et al., “High Intensity Beam Profile Monitors for the LAMPF Primary Beam Lines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3420-3423.
[n] S. S. Kurennoy and Y. K. Batygin, “3D Electromagnetic and Beam Dynamics Modeling of the LANSCE Drift-Tube Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4079-4081. doi:10.18429/JACoW-IPAC2015-THPF150
[n] W. Singer and B. Dwersteg, “Influence of Heat Treatment on Thin Electrodeposited Cu Layers”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F22, pp. 653-657.
[n] N. C. Shipman, R. M. Jones, S. Calatroni, and W. Wuensch, “Measurement of the Dynamic Response of the CERN DC Spark System and Preliminary Estimates of the Breakdown Turn-on Time”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC027, pp. 3338-3340.
[n] A. V. Tsakanian, H. De Gersem, E. Gjonaj, T. Weiland, M. Dohlus, and I. Zagorodnov, “A New Approach for Resistive Wakefield Calculations in Time Domain”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 168-170. doi:10.18429/JACoW-IPAC2015-MOPWA031
[n] B. Goddard et al., “A New Lead Ion Injection System for the CERN SPS with 50 ns Rise Time”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI052, pp. 398-400.
[n] P. N. Ostroumov et al., “Computational Beam Dynamics Requirements for FRIB”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 303-308. doi:10.18429/JACoW-ICAP2018-TUPAG20
[n] A. Ts. Amatuni, “Amplification of External EM-Wave by Nonlinear Wake Waves in Cold Plasma”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA118, pp. 3660-3662.
[n] C. Liu, A. Marusic, M. G. Minty, and V. Ptitsyn, “A SVD-based Orbit Steering Algorithm for RHIC Injection”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD070, pp. 523-525.
[n] D. Gorelov, T. L. Grimm, S. U. De Silva, and J. R. Delayen, “Engineering of a Superconducting 400 MHz Crabbing Cavity for the LHC HiLumi Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC085, pp. 2411-2413.
[n] M. A. Furman, R. De Maria, Y. Papaphilippou, and G. Rumolo, “Electron-cloud Build-up Simulations in the Proposed PS2: Status Report”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD018, pp. 1958-1960.
[n] A. P. Sumbaev et al., “LUE-200 Linac. Status & Development”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP096, pp. 653-655.
[n] H. Tomizawa, H. Dewa, H. Hanaki, A. Mizuno, and T. Taniuchi, “First Emission of Novel Photocathode Gun Gated by Laser-Induced Schottky-Effect”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPB22, pp. 640-643.
[n] C. Steier et al., “Status of the Conceptual Design of ALS-U”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4134-4137. doi:10.18429/JACoW-IPAC2018-THPMF036
[n] Y.-E. Sun, A. S. Johnson, A. H. Lumpkin, P. Piot, J. Ruan, and R. Thurman-Keup, “Experimental Generation of Longitudinally-modulated Electron Beams using an Emittance-exchange Technique”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD019, pp. 4313-4315.
[n] H. L. Rutkowski et al., “An Induction Linac Injector for Scaled Experiments”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1952-1955.
[n] K. G. Sonnad et al., “Measurement and Analysis of Electron Cloud Induced Emittance Growth at CesrTA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2390-2395. doi:10.18429/JACoW-IPAC2015-WEXB2
[n] Y. S. Yuan, N. Wang, S. Wang, and S. Y. Xu, “A Longitudinal Beam Dynamics Code for Proton Synchrotron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUEPPB004, pp. 1119-1121.
[n] P. Burrows et al., “Development of a Turn-by-Turn Beam Position Monitoring System for Multiple Bunch Operation of the ATF Damping Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR064, pp. 930-932.
[n] N. Hubert et al., “SOLEIL Beam Orbit Stability Improvements”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC068, pp. 1156-1158.
[n] X. Wu, X. C. Kong, Q. Le, S. Sun, and Y. Zou, “Control System for BEPCII Linac Power Sub-system”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3156-3158. doi:10.18429/JACoW-IPAC2014-THPRO111
[n] P. F. Beloshitsky, I. N. Meshkov, E. M. Syresin, and I. V. Titkova, “Magnet Lattice of the Synchrotron Radiation Source DELSY”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6B05, pp. 708-710.
[n] Y. Li and S. Krinsky, “Beam Energy Variation with Dipole Fault”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC058, pp. 1305-1307.
[n] S. F. Mikhailov, J. Y. Li, V. Popov, P. W. Wallace, and Y. K. Wu, “Soft Orbit Bumps for Duke Storage Ring VUV FEL Operation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP076, pp. 1774-1776.
[n] S. Ecklund, R. Gerig, J. MacLachlan, and S. Pruss, “Improved Chromacity Control for 100 GeV Storage at Fermilab”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3547-3549.
[n] N. Nakamura et al., “Design of a Bunching System for a High-Current Electron Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH420, pp. 638-640.
[n] Y. F. Sui and J. Cao, “The Wire Scanner at BEPCII”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE026, pp. 1023-1025.
[n] K. Yokoyama, S. Fukuda, Y. Higashi, T. Higo, N. K. Kudo, and S. Matsumoto, “High-gradient Experiments with Narrow Waveguides”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP106, pp. 2758-2760.
[n] R. Becker et al., “A Study of Electron Strings and their Use for Efficient Production of Highly Charged Ions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B08, pp. 578-580.
[n] V. N. Litvinenko, “Performance of High Intensity γ-Rays Source Driven by the Duke Storage Ring FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA010, pp. 657-659.
[n] S. Onuma et al., “The Spill Feedback Control Unit for J-PARC Slow Extraction”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB038, pp. 2770-2772.
[n] M. Titberidze and K. Chouffani, “Laser Compton Scattering X-rays as a Tool for K-edge Densitometry”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR068, pp. 4133-4135.
[n] C. Serpico, A. Fabris, G. Penco, M. Svandrlik, and B. Keune, “Design, Manufacturing and Installation of Two Dual-Feed Accelerating Structures for the FERMI Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 139-141. doi:10.18429/JACoW-LINAC2016-MOPLR005
[n] N. A. Vinokurov, “Status of Novosibirsk ERL”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 5-7. doi:10.18429/JACoW-ERL2019-MOCOXBS03
[n] V. M. Arrieta and S. R. McNeal, “Economical Manufacture of Seamless High-Purity Niobium”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO065, pp. 555-557.
[n] J. Shi et al., “Development of an X-Band Metallic Power Extractor for the Argonne Wakefield Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI031, pp. 2771-2773.
[n] J. Zhuang, Y. P. Chu, D. P. Jin, and J. J. Li, “The Performance Test of F3RP61 and Its Applications in CSNS Experimental Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN027, pp. 763-766.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Aladwan, A. Bertrand, M. Dach, S. Hunt, R. Krempaska, and E. Zimoch, “Image Acquisition and Processing at the Swiss Light Source”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_095.
- D. Horan and G. J. Waldschmidt, “Performance of the 352-MHz 4-kW CW Solid State RF Power Amplifier System using 1-kW Push-pull Devices”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP123, pp. 1059-1061.
- K. Furukawa, J. Chiba, N. Kamikubota, and H. Nakagawa, “Implementation of the EPICS Device Support for Network Based Controllers”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP066, pp. XX-XX.
- E. W. Hoffman et al., “High Intensity Beam Profile Monitors for the LAMPF Primary Beam Lines”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3420-3423.
- S. S. Kurennoy and Y. K. Batygin, “3D Electromagnetic and Beam Dynamics Modeling of the LANSCE Drift-Tube Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4079-4081.
- W. Singer and B. Dwersteg, “Influence of Heat Treatment on Thin Electrodeposited Cu Layers”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F22, pp. 653-657.
- N. C. Shipman, R. M. Jones, S. Calatroni, and W. Wuensch, “Measurement of the Dynamic Response of the CERN DC Spark System and Preliminary Estimates of the Breakdown Turn-on Time”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC027, pp. 3338-3340.
- A. V. Tsakanian, H. De Gersem, E. Gjonaj, T. Weiland, M. Dohlus, and I. Zagorodnov, “A New Approach for Resistive Wakefield Calculations in Time Domain”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 168-170.
- B. Goddard et al., “A New Lead Ion Injection System for the CERN SPS with 50 ns Rise Time”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI052, pp. 398-400.
- P. N. Ostroumov et al., “Computational Beam Dynamics Requirements for FRIB”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 303-308.
- A. Ts. Amatuni, “Amplification of External EM-Wave by Nonlinear Wake Waves in Cold Plasma”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA118, pp. 3660-3662.
- C. Liu, A. Marusic, M. G. Minty, and V. Ptitsyn, “A SVD-based Orbit Steering Algorithm for RHIC Injection”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD070, pp. 523-525.
- D. Gorelov, T. L. Grimm, S. U. De Silva, and J. R. Delayen, “Engineering of a Superconducting 400 MHz Crabbing Cavity for the LHC HiLumi Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC085, pp. 2411-2413.
- M. A. Furman, R. De Maria, Y. Papaphilippou, and G. Rumolo, “Electron-cloud Build-up Simulations in the Proposed PS2: Status Report”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD018, pp. 1958-1960.
- A. P. Sumbaev et al., “LUE-200 Linac. Status & Development”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP096, pp. 653-655.
- H. Tomizawa, H. Dewa, H. Hanaki, A. Mizuno, and T. Taniuchi, “First Emission of Novel Photocathode Gun Gated by Laser-Induced Schottky-Effect”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPB22, pp. 640-643.
- C. Steier et al., “Status of the Conceptual Design of ALS-U”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4134-4137.
- Y.-E. Sun, A. S. Johnson, A. H. Lumpkin, P. Piot, J. Ruan, and R. Thurman-Keup, “Experimental Generation of Longitudinally-modulated Electron Beams using an Emittance-exchange Technique”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD019, pp. 4313-4315.
- H. L. Rutkowski et al., “An Induction Linac Injector for Scaled Experiments”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1952-1955.
- K. G. Sonnad et al., “Measurement and Analysis of Electron Cloud Induced Emittance Growth at CesrTA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2390-2395.
- Y. S. Yuan, N. Wang, S. Wang, and S. Y. Xu, “A Longitudinal Beam Dynamics Code for Proton Synchrotron”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUEPPB004, pp. 1119-1121.
- P. Burrows et al., “Development of a Turn-by-Turn Beam Position Monitoring System for Multiple Bunch Operation of the ATF Damping Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR064, pp. 930-932.
- N. Hubert et al., “SOLEIL Beam Orbit Stability Improvements”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC068, pp. 1156-1158.
- X. Wu, X. C. Kong, Q. Le, S. Sun, and Y. Zou, “Control System for BEPCII Linac Power Sub-system”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3156-3158.
- P. F. Beloshitsky, I. N. Meshkov, E. M. Syresin, and I. V. Titkova, “Magnet Lattice of the Synchrotron Radiation Source DELSY”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6B05, pp. 708-710.
- Y. Li and S. Krinsky, “Beam Energy Variation with Dipole Fault”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC058, pp. 1305-1307.
- S. F. Mikhailov, J. Y. Li, V. Popov, P. W. Wallace, and Y. K. Wu, “Soft Orbit Bumps for Duke Storage Ring VUV FEL Operation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP076, pp. 1774-1776.
- S. Ecklund, R. Gerig, J. MacLachlan, and S. Pruss, “Improved Chromacity Control for 100 GeV Storage at Fermilab”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3547-3549.
- N. Nakamura et al., “Design of a Bunching System for a High-Current Electron Linac”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH420, pp. 638-640.
- Y. F. Sui and J. Cao, “The Wire Scanner at BEPCII”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE026, pp. 1023-1025.
- K. Yokoyama, S. Fukuda, Y. Higashi, T. Higo, N. K. Kudo, and S. Matsumoto, “High-gradient Experiments with Narrow Waveguides”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP106, pp. 2758-2760.
- R. Becker et al., “A Study of Electron Strings and their Use for Efficient Production of Highly Charged Ions”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B08, pp. 578-580.
- V. N. Litvinenko, “Performance of High Intensity γ-Rays Source Driven by the Duke Storage Ring FEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAA010, pp. 657-659.
- S. Onuma et al., “The Spill Feedback Control Unit for J-PARC Slow Extraction”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB038, pp. 2770-2772.
- M. Titberidze and K. Chouffani, “Laser Compton Scattering X-rays as a Tool for K-edge Densitometry”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR068, pp. 4133-4135.
- C. Serpico, A. Fabris, G. Penco, M. Svandrlik, and B. Keune, “Design, Manufacturing and Installation of Two Dual-Feed Accelerating Structures for the FERMI Injector”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 139-141.
- N. A. Vinokurov, “Status of Novosibirsk ERL”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 5-7.
- V. M. Arrieta and S. R. McNeal, “Economical Manufacture of Seamless High-Purity Niobium”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO065, pp. 555-557.
- J. Shi et al., “Development of an X-Band Metallic Power Extractor for the Argonne Wakefield Accelerator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI031, pp. 2771-2773.
- J. Zhuang, Y. P. Chu, D. P. Jin, and J. J. Li, “The Performance Test of F3RP61 and Its Applications in CSNS Experimental Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKN027, pp. 763-766.
Back to search