JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Y. Huang, Y. Kim, M. Kwon, S. H. Nam, and M. K. Park, “Longitudinal Feedback Control System for the PLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A04, pp. 1924-1926. 
[n]	M. Biagini et al., “Upgrade of the PEP-II Low Beta Optics”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B08, pp. 430-432. 
[n]	M. G. Giacchini, L. Antoniazzi, and M. Montis, “IFMIF EVEDA RFQ Local Control System to Power Tests”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO017, pp. 69-71. 
[n]	P. Ninin and B. Denis, “The”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MO213, pp. XX-XX. 
[n]	A. Saini, V. A. Lebedev, N. Solyak, and V. P. Yakovlev, “Estimation of Cryogenic Heat Loads in Cryomodule due to Thermal Radiation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3338-3341. doi:10.18429/JACoW-IPAC2015-WEPTY031
[n]	G. Arnolds-Mayer, H. Downar, and T. Friesen, “On Niobium Sputter Coated Cavities”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1187-1190. 
[n]	G. Eremeev et al., “First results from two Nb3Sn cavities assembled in a CEBAF quarter cryomodule”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 604-607. doi:10.18429/JACoW-LINAC2024-THAA004
[n]	K. R. Kim, M. H. Jung, J.-K. Kil, and S. J. Ra, “Development of theTarget System for Large-Area Uniform Irradiation Using 2D Motional Stage”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA070, pp. 238-240. 
[n]	J. M. Jimenez, G. Arduini, and K. Weiss, “The SPS as a Vacuum Test Bench for Electron Cloud Studies with LHC Type Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAB006, pp. 685-687. 
[n]	K. Hasegawa, M. Kinsho, H. Oguri, and T. Koseki, “Status of J-PARC Accelerators”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO031, pp. 3830-3832. 
[n]	J. P. Sikora et al., “Initial Data From an Electron Cloud Detector in a Quadrupole Magnet at CesrTA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1352-1354. doi:10.18429/JACoW-IPAC2017-TUPAB018
[n]	G. A. Filatov et al., “Transfer Channel from Booster to Nuclotron at the NICA Facility”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB007, pp. 322-324. 
[n]	M. Akemoto, H. Hayano, T. Kawamoto, T. Shidara, S. R. Takeda, and J. Urakawa, “Klystron Modulators with HV Common-Bus for the JLC”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO445, pp. 171-173. 
[n]	T. Ishida, “Neutrino and Other Beam-Lines at J-PARC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUXKI03, pp. 686-690. 
[n]	A. Yamaguchi et al., “2D TRACKING CODE FOR DRIFT TUBE LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3482-3484. doi:10.18429/JACoW-IPAC2019-THPMP014
[n]	S. Papadopoulos et al., “Sub-micro-Tesla Magnetic Shielding Design for Cryomodules in the High-gradient Program at CERN”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 278-282. doi:10.18429/JACoW-SRF2017-MOPB090
[n]	A. Bogacz et al., “CEBAF Energy Recovery Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC006, pp. 195-197. 
[n]	G. Marcus, E. Hemsing, and J. B. Rosenzweig, “Fitting Formulas for Space-charge Dominated Free-electron Lasers”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC101, pp. 3122-3124. 
[n]	K.-H. Park et al., “Field Mapping System for KIRAMS-30 Cyclotron Magnet”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH084, pp. 442-444. 
[n]	P. Lapostolle, J. M. Lagniel, S. Nath, N. Pichoff, E. Tanke, and S. Valero, “The SCHERM Space Charge Routine --- Limitations and Solutions”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4034, pp. 845-847. 
[n]	E. Allaria and G. De Ninno, “Extension of the FERMI FEL1 to Shorter Wavelengths”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC002, pp. 64-66. 
[n]	H. Badakov et al., “Design, Fabrication and Characterization of a Micron-scale Electron Source Based on Field Enhanced Pyroelectric Crystals”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP141, pp. 352-354. 
[n]	D. E. Rees et al., “The SNS Linac High Power RF System Design, Status, and Results”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE007, pp. 1095-1097. 
[n]	G. Xu et al., “Progress Report on Development of a 5-m Drive Laser for Dielectric Laser Acceleration”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME063, pp. 3079-3081. 
[n]	N. Samadi, X. Shi, L. D. Chapman, and L. O. Dallin, “Review of Source Size Measurement Techniques for Low-Emittance Synchrotron Sources”, in Proc. IPAC'20, Caen, France, May 2020, paper WEVIR09, pp. XX-XX. 
[n]	A. Oeftiger et al., “Review of CPU and GPU Faddeeva Implementations”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3090-3093. doi:10.18429/JACoW-IPAC2016-WEPOY044
[n]	Y. Senichev, A. N. Ivanov, A. Lehrach, R. Maier, D. Zyuzin, and S. N. Andrianov, “Spin Tune Decoherence in Multipole Fields”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3017-3019. doi:10.18429/JACoW-IPAC2014-THPRO062
[n]	L. K. Mestha and C. W. Planner, “Application of System Identification Techniques to an RF Cavity Tuning Loop”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 982-985. 
[n]	P. Cameron et al., “Progress in Tune, Coupling, and Chromaticity Measurement and Feedback during RHIC Run 7”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOCC02, pp. 886-888. 
[n]	D. J. Martin, S. Allison, B. Scott, J. J. Sebek, and T. A. Trautwein, “Evaluation of Bergoz Instrumentation NPCT”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP034, pp. 4021-4023. 
[n]	M. Pivi, G. Dugan, M. Palmer, and K. Sonnad, “Simulation of Electron Cloud Induced Instabilities and Emittance Growth for CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper FTR02, pp. 203-207. 
[n]	J. Kuehn et al., “UHV Photocathode Plug Transfer Chain for the BERLinPro SRF-Photoinjector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1381-1383. doi:10.18429/JACoW-IPAC2017-TUPAB029
[n]	A. K. Ciftci, S. Sultansoy, and O. Yavas, “TAC Proposal for Fundamental and Applied Research:  Linac-Ring Type Phi-Factory”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP2A19, pp. 1008-1012. 
[n]	E. Zaplatine, W. Braeutigam, and S. Martin, “Design Study for SC Proton Linac Accelerating Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP125, pp. 959-961. 
[n]	Y. Furukawa, M. Ishii, T. Nakatani, and T. Ohata, “Development of an Interpreter Program for an Equipment Control”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP033, pp. XX-XX. 
[n]	R. Ferdinand, “Challenges of Radioactive Beam Facilities ÔÇô Comparing Solutions at SPIRAL2 and FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1852-1856. doi:10.18429/JACoW-IPAC2014-WEYA01
[n]	G. Trento, D. Horan, E. Swetin, and G. J. Waldschmidt, “A Status Report on the Advanced Photon Source 2-MW DC Resistive Load”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP079, pp. 1011-1013. 
[n]	D. B. Cline, B. Cole, J. Norem, and J. Rosenzweig, “Transverse Focussing Using Plasma Wake Fields”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 154-157. 
[n]	C. S. Chen, C. K. Chan, K. H. Hsu, Y.-H. Liu, and C. S. Yang, “The Leakage Current Induced by Stray Capacitance in the Pulse Magnet System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA042, pp. 762-764. 
[n]	C. Bisegni et al., “Development of an Innovative Storage Manager for a Distributed Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC011, pp. 570-573. 
[n]	P. Letellier et al., “Commissioning of the 200 MeV Injector Linac for the Oxford Instr.-IBM Synchrotron Light Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1082-1085. 
[n]	S. Gorgi Zadeh, R. Calaga, T. Flisgen, and U. van Rienen, “HOM Damping Options for the Z-Pole Operating Scenario of FCC-ee”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 590-593. doi:10.18429/JACoW-IPAC2019-MOPRB006
[n]	L. Zhao et al., “Cavity Processing and Testing Activities at Jefferson Lab for LCLS-II Production”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 173-176. doi:10.18429/JACoW-SRF2017-MOPB050
[n]	E. N. Zaplatin and A. Kanareykin, “SRF Conical Half-wave Resonator Tuning Developments”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO008, pp. 2325-2327. 
[n]	E. Bozoki and S. Kramer, “Ion Shaking in the 200 MeV XLS-Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 789-792. 
[n]	G. G. Gulbekyan, S. L. Bogomolov, V. V. Bekhterev, I. V. Kalagin, N. Yu. Kazarinov, and M. V. Khabarov, “AXIAL INJECTION CHANNEL OF THE DC-72 CYCLOTRON”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO11, pp. 144-146. 
[n]	E. Hemsing, G. Marcus, A. Marinelli, and D. Xiang, “Energy-Silenced HGHG”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2946-2948. doi:10.18429/JACoW-IPAC2014-THPRO038
[n]	P. Piot et al., “Longitudinal Beam Diagnostics for the ILC Injectors and Bunch Compressors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP011, pp. 3971-3973. 
[n]	D. Kang et al., “Characterization of Large Grain Nb Ingot Microstructure Using OIM and Laue Methods”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO067, pp. 890-897. 
[n]	S. Maier et al., “Design Considerations of the Corrugated Structures in a Vacuum Chamber for Impedance Studies at KARA”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 100-104. doi:10.18429/JACoW-IBIC2022-MOP27
[n]	K. Nakajima et al., “Polarization Study in TRISTAN”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 717-720. 
[n]	L. Muguira et al., “Automatic Tuner Unit Design, Simulation and Measurement for Automatic Operation of the RF System in the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS023, pp. 3469-3471. 
[n]	M. Marchetto, “Progress and Plans for High Mass Beam Delivery at TRIUMF”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper MOC01, pp. 33-39. 
[n]	N. Pupeter et al., “A Modular Digital LLRF Control System for Normal as well as Superconducting RF Accelerators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP072, pp. 2174-2176. 
[n]	I. H. Senevirathne, G. Ciovati, and J. R. Delayen, “Measurement of the Magnetic Field Penetration into Superconducting Thin Films”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 978-982. doi:10.18429/JACoW-SRF2019-THP050
[n]	P. C. Chiu et al., “Control Environment of Power Supply for TPS Booster Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC062, pp. 1213-1215. 
[n]	J. A. Holmes and M. A. Plum, “Beam Loss Due to Foil Scattering in the SNS Accumulator Ring”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO1B01, pp. 254-258. 
[n]	H. Vogel et al., “Production of Nb/Cu Sputtered Superconducting Cavities for LHC”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP016, pp. 437-439. 
[n]	S. M. Gerbick and M. P. Kelly, “A Clean Pumping and Venting System for SRF Cavities and Cryomodules”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO029, pp. 619-621. 
[n]	R. Schmidt, M. A. Plum, and Y. Sato, “Summary of the Working Group on Commissioning and Operation”, in Proc. HB'12, Beijing, China, Sep. 2012, paper FRO1B01, pp. 620-624. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search