Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Baumgarten, “Factors Influencing the Vortex Effect in High-Intensity Cyclotrons”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 270-274. doi:10.18429/JACoW-CYCLOTRONS2019-WEB03
[n] N. Nishimori, “Analytical Solution of Phase Space Evolution of Electrons in a SASE FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS29, pp. XX-XX.
[n] A. Kumar, R. Dhawan, and J. Sharma, “Effect of Dust Grains on the Parametric Coupling of Neutral Beam Driven Ion Cyclotron Instability of Lower Hybrid Waves in a Plasma”, presented at the Cyclotrons'22, Beijing, China, Dec. 2022, paper THAO03, unpublished.
[n] H. Buettig et al., “Two Years Experience with the Upgraded ELBE RF System Driven by 20kW Solid State Amplifier Blocks (SSPA)”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2257-2257. doi:10.18429/JACoW-IPAC2014-WEPME003
[n] W. Herdrich and H. P. Kindermann, “RF Power Amplifier for the CERN SPS Operating as LEP Injector”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2794-2797.
[n] C. R. Chang and M. Reiser, “Computer Simulation Studies of Electron Beam Propagation and Collective Ion Acceleration in Vaccum”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 106-109.
[n] J. M. Weber, M. J. Chin, CA. Timossi, and E. C. Williams, “ALS Mini IOC: An FPGA Embedded Processor Based Control System Module for Booster Magnet Ramping at the ALS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS030, pp. 3991-3993.
[n] B. C. Brown et al., “Report on the Production Magnet Measurement System for the Fermilab Energy Saver Superconducting Dipoles and Quadrupoles”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3608-3611.
[n] W. Mondelaers, “Operational Experience with the Low Energy 2% Duty Factor Ghent Electron Linac”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 526-529.
[n] H. Tanaka, J. Schimizu, K. Soutome, and M. Takao, “Simple Calculation Method of Distributed Momentum Acceptance along a Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE022, pp. 1305-1307.
[n] I. Roth, M. P. J. Gaudreau, and M. K. Kempkes, “Thyratron Replacement”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 45-46. doi:10.18429/JACoW-IPAC2016-MOOCA03
[n] M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3827-3829. doi:10.18429/JACoW-IPAC2024-THPS41
[n] V. Litvinenko et al., “Coherent Electron Cooling Experiment at RHIC: Status and Plans”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 35-40. doi:10.18429/JACoW-COOL2019-TUZ01
[n] T. E. Mason, “The Spallation Neutron Source: A Powerful Tool for Materials Research”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper FR203, pp. 1043-1046.
[n] M. White, “The Spallation Neutron Source (SNS)”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO101, pp. 1-5.
[n] G. Berden et al., “Electro-optic Techniques for Longitudinal Electron Bunch Diagnostics”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH076, pp. 413-416.
[n] T. E. Oseroff et al., “Performance of Samples With Novel SRF Materials and Growth Techniques”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2475-2478. doi:10.18429/JACoW-IPAC2018-WEPMF047
[n] Y. Ohnishi et al., “Lattice Diagnostics using Single Kick Closed Orbit at KEKB”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP10, pp. 2981-2983.
[n] R. Valc?â, C. Colldelram, N. Gonzalez, E. Pereiro, A. J. Perez-Berna, and A. Sorrentino, “New Holder for Dual-Axis Cryo Soft X-Ray Tomography of Cells at the Mistral Beamline”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 427-429. doi:10.18429/JACoW-MEDSI2018-THPH43
[n] O. Marqversen et al., “The Orbit Measurement System for the CERN Extra Low Energy Antiproton Ring”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 206-208. doi:10.18429/JACoW-IBIC2017-TUPCF05
[n] M. A. Rehman et al., “Investigation of diagonal-cut plane BPM performance in the CSNS RCS”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6621, unpublished.
[n] W. Barth, J. Glatz, and J. Klabunde, “High Current Transport and Acceleration at the Upgraded UNILAC”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4027, pp. 454-456.
[n] A. Feschenko et al., “Longitudinal Beam Parameters Study in the SNS Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAAB01, pp. 2608-2610.
[n] N. Okuda and K. Yokoya, “Impedance Estimation by Parabolic Partial Differential Equation for Rectangular Taper”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IODN01, pp. 27-29.
[n] Z. Guo, Q. Qin, G. Xu, and C. Zhang, “Bunch Lengthening Study in BEPC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ03, pp. 2955-2957.
[n] S. Setzer, R. Cee, M. Krassilnikov, and T. Weiland, “FEL Photoinjector Simulation Studies by Combining MAFIA TS2 and ASTRA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI076, pp. 1664-1666.
[n] V. Nguyen, H. L. Phillips, and J. Preble, “Development of a 50 kW CW L-Band Rectangular Window for Jefferson Lab FEL Cryomodule”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA163, pp. 1459-1461.
[n] C. W. O. Ostenfeld and M. Pedersen, “300 mm Electromagnetic Wiggler for ELBE”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO55, pp. 353-354.
[n] S. C. F. Rose, D. H. C. Araujo, L. A. Mello Magalhães, and A. L. Olsson, “Apples to Oranges: A Comparison of EPICS Build and Deployment Systems”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 205-209. doi:10.18429/JACoW-ICALEPCS2023-MO4BCO05
[n] R. Erickson, C. W. Allen, T. K. Inman, W. Linebarger, and M. Stanek, “SLAC Accelerator Operations Report: 1992-1995”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA24, pp. 1111-1113.
[n] J. Galambos, “High Intensity Challenges at the Spallation Neutron Source”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper OPL01, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Baumgarten, “Factors Influencing the Vortex Effect in High-Intensity Cyclotrons”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 270-274.
- N. Nishimori, “Analytical Solution of Phase Space Evolution of Electrons in a SASE FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS29, pp. XX-XX.
- A. Kumar, R. Dhawan, and J. Sharma, “Effect of Dust Grains on the Parametric Coupling of Neutral Beam Driven Ion Cyclotron Instability of Lower Hybrid Waves in a Plasma”, presented at the 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THAO03, unpublished.
- H. Buettig et al., “Two Years Experience with the Upgraded ELBE RF System Driven by 20kW Solid State Amplifier Blocks (SSPA)”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2257-2257.
- W. Herdrich and H. P. Kindermann, “RF Power Amplifier for the CERN SPS Operating as LEP Injector”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2794-2797.
- C. R. Chang and M. Reiser, “Computer Simulation Studies of Electron Beam Propagation and Collective Ion Acceleration in Vaccum”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 106-109.
- J. M. Weber, M. J. Chin, CA. Timossi, and E. C. Williams, “ALS Mini IOC: An FPGA Embedded Processor Based Control System Module for Booster Magnet Ramping at the ALS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS030, pp. 3991-3993.
- B. C. Brown et al., “Report on the Production Magnet Measurement System for the Fermilab Energy Saver Superconducting Dipoles and Quadrupoles”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3608-3611.
- W. Mondelaers, “Operational Experience with the Low Energy 2% Duty Factor Ghent Electron Linac”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 526-529.
- H. Tanaka, J. Schimizu, K. Soutome, and M. Takao, “Simple Calculation Method of Distributed Momentum Acceptance along a Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE022, pp. 1305-1307.
- I. Roth, M. P. J. Gaudreau, and M. K. Kempkes, “Thyratron Replacement”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 45-46.
- M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS41, pp. 3827-3829.
- V. Litvinenko et al., “Coherent Electron Cooling Experiment at RHIC: Status and Plans”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 35-40.
- T. E. Mason, “The Spallation Neutron Source: A Powerful Tool for Materials Research”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper FR203, pp. 1043-1046.
- M. White, “The Spallation Neutron Source (SNS)”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO101, pp. 1-5.
- G. Berden et al., “Electro-optic Techniques for Longitudinal Electron Bunch Diagnostics”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH076, pp. 413-416.
- T. E. Oseroff et al., “Performance of Samples With Novel SRF Materials and Growth Techniques”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2475-2478.
- Y. Ohnishi et al., “Lattice Diagnostics using Single Kick Closed Orbit at KEKB”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP10, pp. 2981-2983.
- R. Valc?â, C. Colldelram, N. Gonzalez, E. Pereiro, A. J. Perez-Berna, and A. Sorrentino, “New Holder for Dual-Axis Cryo Soft X-Ray Tomography of Cells at the Mistral Beamline”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 427-429.
- O. Marqversen et al., “The Orbit Measurement System for the CERN Extra Low Energy Antiproton Ring”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 206-208.
- M. A. Rehman et al., “Investigation of diagonal-cut plane BPM performance in the CSNS RCS”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6621, this conference.
- W. Barth, J. Glatz, and J. Klabunde, “High Current Transport and Acceleration at the Upgraded UNILAC”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4027, pp. 454-456.
- A. Feschenko et al., “Longitudinal Beam Parameters Study in the SNS Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOAAB01, pp. 2608-2610.
- N. Okuda and K. Yokoya, “Impedance Estimation by Parabolic Partial Differential Equation for Rectangular Taper”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IODN01, pp. 27-29.
- Z. Guo, Q. Qin, G. Xu, and C. Zhang, “Bunch Lengthening Study in BEPC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ03, pp. 2955-2957.
- S. Setzer, R. Cee, M. Krassilnikov, and T. Weiland, “FEL Photoinjector Simulation Studies by Combining MAFIA TS2 and ASTRA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI076, pp. 1664-1666.
- V. Nguyen, H. L. Phillips, and J. Preble, “Development of a 50 kW CW L-Band Rectangular Window for Jefferson Lab FEL Cryomodule”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA163, pp. 1459-1461.
- C. W. O. Ostenfeld and M. Pedersen, “300 mm Electromagnetic Wiggler for ELBE”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO55, pp. 353-354.
- S. C. F. Rose, D. H. C. Araujo, L. A. Mello Magalhães, and A. L. Olsson, “Apples to Oranges: A Comparison of EPICS Build and Deployment Systems”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO4BCO05, pp. 205-209.
- R. Erickson, C. W. Allen, T. K. Inman, W. Linebarger, and M. Stanek, “SLAC Accelerator Operations Report: 1992-1995”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA24, pp. 1111-1113.
- J. Galambos, “High Intensity Challenges at the Spallation Neutron Source”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper OPL01, pp. XX-XX.
Back to search