Favourites
For Word
[n] J. Snuverink et al., “Status of Ground Motion Mitigation Techniques for CLIC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC023, pp. 1048-1050.
[n] D. J. Liska, L. B. Dauelsberg, and G. Spalek, “Precision Alignment of Permanent Magnet Drift Tubes”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-5, pp. 48-49.
[n] A. Ushakov, S. Riemann, and A. Schaelicke, “Polarized Positron Production and Tracking at the ILC Positron Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN017, pp. 2742-2744.
[n] C. Bracco et al., “CERN AWAKE Facility Readiness for First Beam”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1071-1074. doi:10.18429/JACoW-IPAC2016-TUOBB03
[n] E. H. Bakraji et al., “Protons Activation up to 30 MeV for Trace Analysis in High Purity Materials”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-11, pp. 605-607.
[n] E. Lecorche et al., “Overview of the GANIL Control Systems for the Different Projects Around the Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 406-410. doi:10.18429/JACoW-ICALEPCS2017-TUPHA016
[n] M. Ahammed et al., “Fabrication and Installation of Radio Frequency System for K500 Superconducting Cyclotron at Kolkata”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA001, pp. 3673-3675.
[n] G. Franzini et al., “Beam Diagnostics for Charge and Position Measurements in ELI-NP GBS”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 682-685. doi:10.18429/JACoW-IBIC2016-WEPG25
[n] I. Marneris, E. M. Bajon, R. Bonati, T. Roser, J. Sandberg, and N. Tsoupas, “High Power Fast Ramping Power Supplies”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO4GRI01, pp. 112-116.
[n] S. H. Kim and D. Jeong, “Development of Advanced Mirror Adjustment Device for Multipurpose Synchrotron Radiation”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper WEPPP057, unpublished.
[n] R. M. Hutcheon, F. P. Adams, P. Lucuta, J. E. McGregor, B. H. Smith, and M. S. de Jong, “Measurements of High-Temperature rf and Microwave Properties of Selected Aluminas and Ferrites Used in Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 795-798.
[n] R. Lambiase, “Application of the Superconducting Power Cables in the RHIC Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP06F, pp. 2068-2069.
[n] L.-H. Yu, S. Krinsky, O. Singh, and F. J. Willeke, “The Performance of a Fast Closed Orbit Feedback System with Combined Fast and Slow Correctors”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC140, pp. 3315-3317.
[n] J. R. Harris et al., “Temperature Dependence of Photoemission from Copper and Niobium”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC19, pp. 1184-1186.
[n] M. P. Kelly et al., “Superconducting 72 MHz =0.077 Quarter-wave Cavity for ATLAS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP046, pp. 892-894.
[n] D. F. Orris, R. H. Carcagno, J. M. Nogiec, R. Rabehl, C. Sylvester, and M. A. Tartaglia, “A New Facility for Testing Superconducting Solenoid Magnets with Large Fringe Fields at Fermilab”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA16, pp. 1265-1267.
[n] K. Furukawa et al., “Upgrade of KEK Electron/positron Linac Control System for the Both SuperKEKB and Light Sources”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1257-1260. doi:10.18429/JACoW-ICALEPCS2017-THMPL02
[n] Y. X. Chen, D. Q. Gao, Y. Z. Huang, R. K. Wang, and H. B. Yan, “A Dipole Power Supply Based on Multi-lever Inverter Technique”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO005, pp. 3343-3345.
[n] G. Brajnik, S. Bassanese, G. Cautero, S. Cleva, and R. De Monte, “Integration of a Pilot-Tone Based BPM System Within the Global Orbit Feedback Environment of Elettra”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 190-195. doi:10.18429/JACoW-IBIC2018-TUOC01
[n] Yu. V. Tereshonkov and S. N. Andrianov, “Load Curves Distortion Induced by Fringe Field Effects in the Ion Nanoprobe”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD039, pp. 1514-1516.
[n] M. Rogge et al., “Stripping Injection of H2 and H- into COSY”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 417-420.
[n] R. M??ller et al., “Coherent Synchrotron Radiation at the Metrology Light Source of the PTB”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC033, pp. 2058-2060.
[n] Y. Cho et al., “A 1- to 5-MW, RCS-Based, Short-Pulse Spallation Neutron Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8B011, pp. 953-955.
[n] M. Giovannozzi et al., “Analysis of Optical Layouts for the Phase 1 Upgrade of the CERN Large Hadron Collider Insertion Regions”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP012, pp. 2551-2553.
[n] L. Ma, P. A. Corlett, and A. J. Moss, “LLRF Characterisation of the Daresbury International Cryomodule”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME052, pp. 3046-3048.
[n] B. Grigoryan, G. A. Amatuni, I. N. Margaryan, A. V. Tsakanian, V. M. Tsakanov, and A. Vardanyan, “Beam Phase-Space Study for AREAL RF Photogun Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC032, pp. 1069-1071.
[n] J. B. Rosenzweig, “Thermal Limits on Wave Amplitude in the Plasma Wake-Field Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 124-127.
[n] Y. Iwashita, A. Morita, and A. Noda, “Tune Value Evaluation for Combined Function Lattice”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP12F, pp. 1309-1311.
[n] A. Schuett, C. Knochenhauer, M. McAteer, and P. Schnizer, “Optimizing non-linear kicker injection parameters using machine learning”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3571-3574. doi:10.18429/JACoW-IPAC2024-THPR35
[n] D. Abell, B. Nash, I. Pogorelov, P. Moeller, R. Nagler, and N. Goldring, “Linear Canonical Transform Library for Fast Coherent X-Ray Wavefront Propagation”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM023, unpublished.
[n] H. Hsieh et al., “Superconducting Magnet Program for X-Ray Lithography Source at Brookhaven National Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2248-2251.
[n] I. Efthymiopoulos et al., “Design Study for a Future LAGUNA-LBNO Long-baseline Neutrino Facility at CERN”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI056, pp. 3418-3420.
[n] A. Zlobin and M. Baldini, “Conceptual designs of a 20 T dipole based on hybrid HTS/LTS cos-theta coils”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPS70, unpublished.
[n] S. Ogur et al., “Towards a Preliminary FCC-ee Injector Design”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 90-93. doi:10.18429/JACoW-eeFACT2016-TUT2H5
[n] F. Glotin, J.-M. Berset, R. Chaput, D. Jaroszynski, J.-M. Ortega, and R. Prazeres, “Short Pulse Generation with the CLIO FEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 846-849.
[n] R. Nelson and S. Holben, “Operating Experience and Reliability Improvements on the 5 kW CW Klystron at Jefferson Lab”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P037, pp. 3165-3167.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Snuverink et al., “Status of Ground Motion Mitigation Techniques for CLIC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC023, pp. 1048-1050.
- D. J. Liska, L. B. Dauelsberg, and G. Spalek, “Precision Alignment of Permanent Magnet Drift Tubes”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-5, pp. 48-49.
- A. Ushakov, S. Riemann, and A. Schaelicke, “Polarized Positron Production and Tracking at the ILC Positron Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN017, pp. 2742-2744.
- C. Bracco et al., “CERN AWAKE Facility Readiness for First Beam”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1071-1074.
- E. H. Bakraji et al., “Protons Activation up to 30 MeV for Trace Analysis in High Purity Materials”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper J-11, pp. 605-607.
- E. Lecorche et al., “Overview of the GANIL Control Systems for the Different Projects Around the Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 406-410.
- M. Ahammed et al., “Fabrication and Installation of Radio Frequency System for K500 Superconducting Cyclotron at Kolkata”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA001, pp. 3673-3675.
- G. Franzini et al., “Beam Diagnostics for Charge and Position Measurements in ELI-NP GBS”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 682-685.
- I. Marneris, E. M. Bajon, R. Bonati, T. Roser, J. Sandberg, and N. Tsoupas, “High Power Fast Ramping Power Supplies”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO4GRI01, pp. 112-116.
- S. H. Kim and D. Jeong, “Development of Advanced Mirror Adjustment Device for Multipurpose Synchrotron Radiation”, presented at the MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper WEPPP057, unpublished.
- R. M. Hutcheon, F. P. Adams, P. Lucuta, J. E. McGregor, B. H. Smith, and M. S. de Jong, “Measurements of High-Temperature rf and Microwave Properties of Selected Aluminas and Ferrites Used in Accelerators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 795-798.
- R. Lambiase, “Application of the Superconducting Power Cables in the RHIC Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP06F, pp. 2068-2069.
- L.-H. Yu, S. Krinsky, O. Singh, and F. J. Willeke, “The Performance of a Fast Closed Orbit Feedback System with Combined Fast and Slow Correctors”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC140, pp. 3315-3317.
- J. R. Harris et al., “Temperature Dependence of Photoemission from Copper and Niobium”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC19, pp. 1184-1186.
- M. P. Kelly et al., “Superconducting 72 MHz =0.077 Quarter-wave Cavity for ATLAS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP046, pp. 892-894.
- D. F. Orris, R. H. Carcagno, J. M. Nogiec, R. Rabehl, C. Sylvester, and M. A. Tartaglia, “A New Facility for Testing Superconducting Solenoid Magnets with Large Fringe Fields at Fermilab”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA16, pp. 1265-1267.
- K. Furukawa et al., “Upgrade of KEK Electron/positron Linac Control System for the Both SuperKEKB and Light Sources”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1257-1260.
- Y. X. Chen, D. Q. Gao, Y. Z. Huang, R. K. Wang, and H. B. Yan, “A Dipole Power Supply Based on Multi-lever Inverter Technique”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO005, pp. 3343-3345.
- G. Brajnik, S. Bassanese, G. Cautero, S. Cleva, and R. De Monte, “Integration of a Pilot-Tone Based BPM System Within the Global Orbit Feedback Environment of Elettra”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 190-195.
- Yu. V. Tereshonkov and S. N. Andrianov, “Load Curves Distortion Induced by Fringe Field Effects in the Ion Nanoprobe”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD039, pp. 1514-1516.
- M. Rogge et al., “Stripping Injection of H2 and H- into COSY”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 417-420.
- R. M??ller et al., “Coherent Synchrotron Radiation at the Metrology Light Source of the PTB”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC033, pp. 2058-2060.
- Y. Cho et al., “A 1- to 5-MW, RCS-Based, Short-Pulse Spallation Neutron Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8B011, pp. 953-955.
- M. Giovannozzi et al., “Analysis of Optical Layouts for the Phase 1 Upgrade of the CERN Large Hadron Collider Insertion Regions”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP012, pp. 2551-2553.
- L. Ma, P. A. Corlett, and A. J. Moss, “LLRF Characterisation of the Daresbury International Cryomodule”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME052, pp. 3046-3048.
- B. Grigoryan, G. A. Amatuni, I. N. Margaryan, A. V. Tsakanian, V. M. Tsakanov, and A. Vardanyan, “Beam Phase-Space Study for AREAL RF Photogun Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC032, pp. 1069-1071.
- J. B. Rosenzweig, “Thermal Limits on Wave Amplitude in the Plasma Wake-Field Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 124-127.
- Y. Iwashita, A. Morita, and A. Noda, “Tune Value Evaluation for Combined Function Lattice”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP12F, pp. 1309-1311.
- A. Schuett, C. Knochenhauer, M. McAteer, and P. Schnizer, “Optimizing non-linear kicker injection parameters using machine learning”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR35, pp. 3571-3574.
- D. Abell, B. Nash, I. Pogorelov, P. Moeller, R. Nagler, and N. Goldring, “Linear Canonical Transform Library for Fast Coherent X-Ray Wavefront Propagation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM023, unpublished.
- H. Hsieh et al., “Superconducting Magnet Program for X-Ray Lithography Source at Brookhaven National Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2248-2251.
- I. Efthymiopoulos et al., “Design Study for a Future LAGUNA-LBNO Long-baseline Neutrino Facility at CERN”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI056, pp. 3418-3420.
- A. Zlobin and M. Baldini, “Conceptual designs of a 20 T dipole based on hybrid HTS/LTS cos-theta coils”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS70, unpublished.
- S. Ogur et al., “Towards a Preliminary FCC-ee Injector Design”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 90-93.
- F. Glotin, J.-M. Berset, R. Chaput, D. Jaroszynski, J.-M. Ortega, and R. Prazeres, “Short Pulse Generation with the CLIO FEL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 846-849.
- R. Nelson and S. Holben, “Operating Experience and Reliability Improvements on the 5 kW CW Klystron at Jefferson Lab”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P037, pp. 3165-3167.
Back to search