JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Jansson, V. Balbekov, D. R. Broemmelsiek, M. Hu, N. V. Mokhov, and K. Yonehara, “A Muon Beam for Cooling Experiments”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN102, pp. 2948-2950. 
[n]	J. Gomez-Goni, A. G. Mathewson, and A. Poncet, “The Vacuum Behaviour of Screen Pumping Holes in the LHC Studied by Monte Carlo Simulation Techniques”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1579-1582. 
[n]	W. Wuensch et al., “Experience Operating an X-band High-Power Test Stand at CERN”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2288-2290. doi:10.18429/JACoW-IPAC2014-WEPME016
[n]	K. T. McDonald et al., “The MERIT High-Power Target Experiment at the CERN PS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4GRI03, pp. 795-799. 
[n]	S. Marsching, E. Huttel, M. Klein, A.-S. Mueller, and N. J. Smale, “First Experience with the MATLAB Middle Layer at ANKA”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN009, pp. 253-256. 
[n]	J. J. Kritzinger, A. M??ller, and H. A. Smit, “Experience with Electrical Contact Systems for Radio Frequencies at NAC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-25, pp. 261-264. 
[n]	L. Bobb and G. Rehm, “Performance of a Reflective Microscope Objective in an X-ray Pinhole Camera”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 477-481. doi:10.18429/JACoW-IBIC2018-WEPB18
[n]	F. Meot, S. J. Brooks, D. Trbojevic, N. Tsoupas, and S. C. Tygier, “Beam Dynamics Numerical Studies Regarding CBETA Cornell-BNL ERL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 824-827. doi:10.18429/JACoW-IPAC2017-MOPIK123
[n]	H. V. Smith Jr and J. D. Schneider, “Status Update on the Low-Energy Demonstration Accelerator LEDA”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4014, pp. 418-420. 
[n]	I. Dolenc Kittelmann and T. J. Shea, “Simulations and Detector Technologies for the Beam Loss Monitoring System at the ESS Linac”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 553-558. doi:10.18429/JACoW-HB2016-THAM6Y01
[n]	P. Leban, E. Janezic, and M. Sj?Âstr?Âm, “Fast Orbit Feedback Application at MAX IV and SOLARIS Storage Rings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1748-1750. doi:10.18429/JACoW-IPAC2014-TUPRI078
[n]	M. Y. Park, H. J. Kwon, Y. H. Kim, J. H. Jang, and Y. S. Cho, “DTL Fabrication Status of PEFP Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21008, pp. XX-XX. 
[n]	P. Ausset, J. M. Lagniel, P. Le Boulicaut, P. Mattei, and D. Uriot, “Low Intensity Beam Charge Measurement of the 1 GeV/amu SATURNE II Extracted Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1728-1731. 
[n]	J. Irwin, N. Walker, and Y. T. Yan, “The Application of Lie Algebra Methods to PEP-II Design”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 899-902. 
[n]	O. A. Nezhevenko and V. P. Yakovlev, “Traveling-Wave Accelerating Test Structure at 34.3 Ghz”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA49, pp. 3492-3494. 
[n]	M. Crescenti, P. Knaus, and S. Rossi, “The RF Cycle of the Pimms Medical Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A02, pp. 2503-2505. 
[n]	G. Franchetti, A. S. Parfenova, R. Tom?ís, and G. Vanbavinckhove, “Benchmarking of the NTRM Method on Octupolar Nonlinear Components at the CERN-SPS Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEOBRA01, pp. 2435-2437. 
[n]	M. Andersen, “Fast Beam Current Transformer Software for the CERN Injector Complex”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS027, pp. 382-385. 
[n]	S. Battisti, J. F. Bottollier, B. Frammery, B. Szeless, and M. Van Rooy, “Beam Instrumentation in the LEP Pre-Injector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 570-573. 
[n]	J.-F. Liu et al., “RF Surface Resistance of Copper-on-Beryllium at Cryogenic Temperatures Measured by a 22-GHz Demountable Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB020, pp. 2083-2085. 
[n]	S. Bauer et al., “Latest Results from the Production of 500 MHz SRF Modules for Light Sources and CESR Upgrade”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PS001, pp. XX-XX. 
[n]	H. Haseroth, “Survey on the Performance and Development of Existing Proton Linacs”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOA0001, pp. 3-8. 
[n]	A. S. Aryshev et al., “A Compact Soft X-ray Source based on Thomson Scattering of Coherent Diffraction Radiation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA053, pp. 196-198. 
[n]	A. J. Jason, B. Blind, E. A. Heighway, and E. M. Svaton, “Design of Achromatic Bending Systems in the Presence of Space Charge”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1767-1770. 
[n]	J. Rochford et al., “The Development of a Superconducting Undulator for the ILC Positron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE2RAI01, pp. 1839-1843. 
[n]	M. Cautero and T. N. Gucin, “Storageless Resonant Converter for Accelerator Magnets”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1248-1250. doi:10.18429/JACoW-IPAC2019-TUPMP011
[n]	F. Shishikura et al., “LEBRA Free Electron Laser as a Radiation Source for Photochemical Reactions in Living Organisms”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO65, pp. 675-679. 
[n]	A. Terebilo, C. Pellegrini, M. Cornacchia, J. Corbett, and D. Martin, “Measurement of the Variation of Machine Parameters and the Effect of the Power Supplies Ripple on the Instantaneous Tunes at SPEAR”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V046, pp. 1490-1492. 
[n]	A. A. Zavadtsev, L. V. Kravchuk, S. V. Kutsaev, and D. A. Zavadtsev, “Solid State High Power RF System for Superconducting Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP090, pp. 1042-1044. 
[n]	S. Heifets and R. Rossmanith, “High Repetition Rate Kickers for Linear Colliders”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-09, pp. 547-549. 
[n]	B. G. Chidley, J. C. Brown, S. B. Hodge, J. H. Ormrod, and J. Ungrin, “The Chalk River High Current Test Facility”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper I02, pp. 218-225. 
[n]	P. Zisopoulos, F. Antoniou, and Y. Papaphilippou, “Parametric Study of the CLIC Damping Rings Delay Ring for Reaching Isochronicity Conditions”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR056, pp. 1948-1950. 
[n]	C. J. Spataro, C. Amundsen, H. Bassan, and S. K. Sharma, “NSLS-II Beam Aperture Slit Vibration Studies”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 239-241. doi:10.18429/JACoW-MEDSI2016-TUPE33
[n]	D. Lens, P. H??lsmann, and H. Klingbeil, “Beam Loading Effects on the RF Control Loops of a Double-Harmonic Cavity System for FAIR”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP100, pp. 2249-2251. 
[n]	M. T. Lynch, “Control of Linear Accelerator Noise in the Los Alamos Free-Electron Laser (FEL)”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-10, pp. 59-61. 
[n]	S. N. Andrianov et al., “Dynamic Equations: The Matrix Representation of Beam Dynamic Equations Instead of Tensor Description”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3554-3556. doi:10.18429/JACoW-IPAC2018-THPAK134
[n]	C. Kim et al., “Beam Diagnostic Systems for PAL-XFEL”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD28, pp. 598-600. 
[n]	C. Rode, D. Richied, S. Stoy, and P. C. VanderArend, “Energy Doubler Refrigeration System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1328-1331. 
[n]	I. Miura, E. Minehara, Y. Mashima, S. Yoshizawa, R. Nagai, and M. Takeuchi, “Measurements of the Microwave Surface Resistance of Bi2Sr2CaCu2Ox Superconductor on Silver Substrate Using a Half-wave Coaxial Cavity Resonator”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91G01, pp. XX-XX. 
[n]	W. Kang and Y. Hao, “A New Slotted-Pipe Kicker Magnet for BEPCII Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT005, pp. 955-957. 
[n]	J. R. Haines, M. Futakawa, and W. Wagner, “Megawatt Class Spallation Target Development”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4GRI02, pp. 794-794. 
[n]	H. Deveci and M. Jebramcik, “Modeling and Field Analysis of the LEIR Bending Magnets and Optics Integration”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5038, unpublished. 
[n]	T. Katoh et al., “Some Utilities for EPICS Toolkit”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D046, pp. 504-506. 
[n]	I. I. Degtyarev, A. E. Lokhovitskii, and I. A. Yazynin, “Efficiency of the UNK Scraper System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P119, pp. 252-254. 
[n]	W. Weingarten, “On the Field Dependent Surface Resistance Observed in Superconducting Niobium Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO052, pp. 347-351. 
[n]	C. Kerns, J. Crisp, Q. Kerns, and H. Miller, “New Low-Level RF System for the Fermilab Booster Synchrotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 619-622. 
[n]	M. V. Fazio, W. W. Destler, R. F. Hoeberling, J. Kinross-Wright, R. Stringfield, and F. VanHaaften, “Development of the Resonant-Cavity Virtual-Cathode and Large-Orbit Gyrotron High-Power Microwave Sources”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1134-1137. 
[n]	S. Suzuki et al., “Recent Improvements in SPring-8 Linac for Early Recovery from Beam Interruption”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB092, pp. 1035-1037. 
[n]	G. M. Kazakevich, Y. U. Jeong, G. I. Kuznetsov, B. C. Lee, S.-H. Park, and V. M. Pavlov, “Injection System for Microtron-Based Terahertz FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP049, pp. XX-XX. 
[n]	F. Thomas et al., “X-Ray Absorber Design and Calculations for the EBS Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 257-261. doi:10.18429/JACoW-MEDSI2016-WEAA02
[n]	V. M. Skorkin, S. V. Akulinichev, and A. V. Andreev, “The High-Current Deuteron Accelerator for the Neutron Therapy”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper FRCHX01, pp. 399-401. 
[n]	K. Chalut, V. Litvinenko, I. P. Pinayev, and S. Roychowdhury, “Phase-Space Tomography of Giant Pulses in Storage Ring FEL: Theory and Experiment”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper WEOA004, pp. XX-XX. 
[n]	N. Hosoda et al., “Timing System of SPring-8 Booster Synchrotron”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP046, pp. XX-XX. 
[n]	V. Zhabitsky, W. H?Âfle, G. Kotzian, E. Montesinos, M. Schokker, and D. Valuch, “Beam Tests of the LHC Transverse Feedback System”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHX01, pp. 275-279. 
[n]	E. Asseo, G. Baribaud, M. Boutheon, H. Kugler, and F. Volker, “Integration of Existing Dissimilar Power Supply Controls into a Standardized Equipment-Orientated Control System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3319-3322. 
[n]	H. Tang et al., “Experimental Studies of the Charge Limit Phenomenon in NEA GaAs Photocathodes”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 46-49. 
[n]	Y. Iwashita, S. Fukuda, T. Matsumoto, S. Michizono, and M. Yoshida, “Development of Permanent Magnet Focusing for Klystrons”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS087, pp. 1743-1745. 
[n]	J. Blau, K. R. Cohn, W. B. Colson, C. M. Pogue, M. Stanton, and A. I. Yilmaz, “Free Electron Lasers in 2011”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPB09, pp. 274-278. 
[n]	A. Jansson et al., “An Ionization Profile Monitor for the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT032, pp. 2227-2229. 
[n]	B. H. Wiik, “HERA Status”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 431-436. 
[n]	J. R. Calvey, J. A. Crittenden, G. Dugan, M. A. Palmer, M. A. Furman, and K. C. Harkay, “Methods for Quantitative Interpretation of Retarding Field Analyzer Data”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP214, pp. 501-503. 
[n]	N. Messbah, F. Abbasi Davani, S. Ahmadiannamin, H. Shaker, and M. Shirshekan, “Design of Beam Position Monitoring System for IPM Low Energy Electron LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4394-4396. doi:10.18429/JACoW-IPAC2019-THPTS019
[n]	J. Yang et al., “Femtosecond Electron Bunch Measurement using THz Cherenkov Radiation in Dielectric Materials”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD40, pp. 622-624. 
[n]	Y. Shobuda, Y. H. Chin, K. Ohmi, and T. Toyama, “The Impedance of the Ceramic Chamber in J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP025, pp. 1898-1900. 
[n]	Dr. R. C. Pardo, “A Study of Beam Chopping Options for the ATLAS Positive Ion Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP08, pp. 65-67. 
[n]	M. A. Leonova et al., “Study of Electronegative Gas Effect in Beam-Induced Plasma”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC040, pp. 220-222. 
[n]	V. L. Brook, N. G. Mamuchashvili, I. G. Morozov, S. V. Shekhvatov, I. N. Tereschenko, and V. G. Tishin, “Monitoring the Conditions of Beam Injection into the IHEP Accelerator from the Booster”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1597-1599. 
[n]	A. Khaleghi, K. Mahmoudi, M. Oghbaie, M. Akbari, and J. Rahighi, “Conceptual Design of Developing a Mobile App for Distributed Information Services for Control Systems (DISCS)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 315-317. doi:10.18429/JACoW-ICALEPCS2017-TUMPL06
[n]	A. Donadon Servelle, R. Bruce, R. Cai, B. Lindstrom, and S. Redaelli, “High-Luminosity LHC collimation performance with machine errors and during fast failures”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4106, unpublished. 
[n]	I. A. Yurin, M. S. Dmitriyev, E. N. Indiushnii, and S. M. Polozov, “Light Ion Accelerator Magnets”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 390-392. doi:10.18429/JACoW-RuPAC2021-WEPSC21
[n]	J. Bonofiglio, S. Alfredson, S. Hitchcock, F. Marti, A. Rodriguez, and G. Stork, “Stripper Foil Mechanism for the K1200 Superconducting Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-04, pp. XX-XX. 
[n]	M. Bergher, J. C. Bourdon, P. Brunet, and J. Le Duff, “A Double Frequency RF System to Increase the D. C. I. Energy”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1783-1786. 
[n]	S. Zander, F. Frommberger, P. Haenisch, W. Hillert, and M. T. Switka, “High Resolution Synchrotron Light Analysis at ELSA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME007, pp. 482-484. 
[n]	A. Y. Molodozhentsev, S. Igarashi, Y. Sato, and J. Takano, “Study a `Sum' Linear Coupling Resonance for J-PARC Main Ring: Observations and Simulations”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1147-1149. doi:10.18429/JACoW-IPAC2014-TUPRO052
[n]	G. Maire, A. Kehrli, M. Pezzetti, S. Ravat, B. Charnier, and H. Coppier, “Evaluation and Implementation of Advanced Process Control with the compactRIO Material of National Instrument”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC125, pp. 1355-1358. 
[n]	J. J. Welch et al., “FEL Spectral Measurements at LCLS”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THOB5, pp. 461-464. 
[n]	R. E. Pollock, “Physics with Storage Rings (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XIV-03, pp. 753-757. 
[n]	F. Greeley, M. Knott, L. Lewis, C. Swoboda, and F. Toussaint, “Multiplexing Digitized Beam Information for Accelerator Users and Operators”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 891-894. 
[n]	D. Tarazona, M. Berz, R. Hipple, K. Makino, and M. J. Syphers, “Muon Beam Tracking and Spin-Orbit Correlations for Precision g-2 Measurements”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3397-3399. doi:10.18429/JACoW-IPAC2016-THPMR006
[n]	U. Epting, “Computing and Network Infrastructure for Controls CNIC”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O2_009. 
[n]	M. R. Davis et al., “Latest Performance Results from the FONT 5 Intra Train Beam Position Feedback System at ATF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME053, pp. 3049-3051. 
[n]	J. Y. Zou et al., “Calibration of Beam Position Monitors in the Injector of HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME043, pp. 568-570. 
[n]	G. O. Rodrigues et al., “Effect of Source Tuning Parameters on the Plasma Potential of Heavy Ions and its Influence on the Longitudinal Optics of the High Current Injector”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEXO05, pp. 90-94. 
[n]	D. Angal-Kalinin, J. W. McKenzie, B. L. Militsyn, and J. K. Jones, “Optics Design and Layout for the Electron Beam Test Facility at Daresbury Laboratory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP038, pp. 646-648. 
[n]	R. Byrns, H. He, and W.-D. M?Âller, “Cryogenic Distribution System ( CDS ) for Eight HERA Superconducting RF Cavity Cryostats”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E20, pp. XX-XX. 
[n]	R. E. Laxdal, K. Fong, A. K. Mitra, R. Poirier, T. Ries, and V. Zviagintsev, “A Mechanical Tuner and RF Drive Line System for the ISAC II Quarter Wave Superconducting Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP32, pp. 700-702. 
[n]	W. Wuensch et al., “A High-gradient Test of a 30 GHz Molybdenum-iris Structure”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS103, pp. 801-803. 
[n]	H. Nakayama et al., “Beam Background and MDI Design for SuperKEKB/Belle-II”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ010, pp. 3702-3704. 
[n]	I. Vasserman, B. Berkes, J. Kvitkovitc, and J. Z. Xu, “Compensation of the Planar Hall Effect Voltage Using a New Two-Sensor Hall Probe Design”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP062, pp. 2404-2406. 
[n]	A. A. Mikhailichenko, “Laser Driven Linear Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP155, pp. 2850-2852. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search