Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Schoefer et al., “Increasing the AGS Beam Polarization with 80 Tune Jumps”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUXA03, pp. 1015-1019.
[n] G. Ren, D. H. He, W. Li, Y. Li, and M. Zeng, “Study of Diamond Detector Application at the Front End of a High Intensity Hadron Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 972-974. doi:10.18429/JACoW-IPAC2015-MOPTY016
[n] P. Ch. Chochula, A. Augustinus, P. M. Bond, A. N. Kurepin, M. Lechman, and O. Pinazza, “The Evolution of the ALICE Detector Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1087-1090. doi:10.18429/JACoW-ICALEPCS2015-THHA3O01
[n] S. Ackermann, V. Miltchev, and J. Rossbach, “Transverse Phase-space Studies for the Electron Optics at the Direct XUV-seeding Experiment at FLASH (DESY)”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPA31, pp. 263-266.
[n] Y. Sun and M. Borland, “Alternate Lattice Design for Advanced Photon Source Multi-Bend Achromat Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1803-1805. doi:10.18429/JACoW-IPAC2015-TUPJE071
[n] R. W. Assmann, S. Redaelli, and W. Scandale, “Optics Study for a Possible Crystal-based Collimation System for the LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS017, pp. 1526-1528.
[n] G. Olry et al., “Design and Industrial Fabrication of Beta=0.35 Spoke-type Cavity”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO035, pp. 2271-2273.
[n] M. G. Billing, M. Giannella, R. M. Littauer, and G. R. Rouse, “Interaction of CESR Vacuum Pumps with Stored Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1163-1166.
[n] M. V. Fisher, L. Assoufid, J. L. McChesney, J. Qian, R. Reininger, and F. M. Rodolakis, “Minimizing Grating Slope Errors in the IEX Monochromator at the Advanced Photon Source”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 336-338. doi:10.18429/JACoW-MEDSI2016-WEPE14
[n] R. L. Poirier et al., “RF Tests on the Initial 2.8m Section of the 8m Long ISAC RFQ at TRIUMF”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4087, pp. 609-611.
[n] J. Bradley, J. D. Crnkovic, D. Stratakis, and M. J. Syphers, “Initial Studies into Longitudinal Ionization Cooling for the Muon g-2 Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1522-1525. doi:10.18429/JACoW-IPAC2018-TUPMK015
[n] R. De Maria and M. Solfaroli, “Smooth and Beta-Beating-Free Optics Transitions for HL-LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 472-475. doi:10.18429/JACoW-IPAC2019-MOPMP020
[n] K. Noda et al., “Beam Test on Ring Property in HIMAC Synchrotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 982-985.
[n] I. Pinayev, “Beam Postion Monitor for Energy Recovery Linac”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA15, pp. 361-363.
[n] P. Sing Babu, A. Goswami And V, and S. Pandit, “Simulation Study Of High Intensity Beam Bunching”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 376-378.
[n] M. M. Paoluzzi et al., “Beam Tests Using a Wide Band RF System Prototype in the CERN PS Booster”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3134-3137. doi:10.18429/JACoW-IPAC2015-WEPHA015
[n] F. Casagrande et al., “SNS 2.1K Cold Box Turn-down Studies”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH193, pp. 514-516.
[n] J.-F. Ostiguy, K. Y. Ng, R. M. Jones, Z. Li, and N. M. Kroll, “Comparative Study of Medium Damped and Detuned Linear Accelerator Structures”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH050, pp. 3789-3791.
[n] A. J. Dobbs, D. Adey, and L. Coney, “MICE Muon Beamline Particle Rate and Related Beam Loss in the ISIS Synchrotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ035, pp. 874-876.
[n] M. Yan, C. Behrens, C. Gerth, G. Kube, B. Schmidt, and S. Wesch, “Beam Profile Measurements Using a Fast Gated CCD Camera and a Scintillation Screen to Suppress COTR”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB16, pp. 590-593.
[n] A. S. Fisher, R. C. Field, and L. Y. Nicolas, “Evaluating Beam-Loss Detectors for LCLS-2”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 678-681. doi:10.18429/JACoW-IBIC2016-WEPG23
[n] M. W. Lin, D. R. Abercrombie, I. Jovanovic, and A. Rakhman, “Modeling and Experimental Update on Quasi-phase Matched Direct Laser Electron Acceleration In Density-modulated Plasma Waveguides”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA089, pp. 1325-1327.
[n] C. P. Neuman and P. G. O, “The Effect of Initial Energy Spread on Longitudinal Beam Modulations in an Electron Gun”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP021, pp. 1537-1539.
[n] J. H. Shao, H. Chen, and Q. Z. Xing, “Design of a C-band 6 MeV Standing-wave Linear Accelerating Structure”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC023, pp. 119-121.
[n] P. Beli et al., “Spiral Inflectors And Electrodes In The Central Region Of The Vincy Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 400-402.
[n] A. Streun, M. B?Âge, J. T. M. Chrin, and A. L??deke, “Correction of Imperfections in the SLS Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP009, pp. 2282-2284.
[n] A. Brinkmann and J. Ziegler, “Dry-Ice Cleaning of RF-Structures at DESY”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 52-55. doi:10.18429/JACoW-LINAC2016-MOOP05
[n] S. Berry, N. Bazin, J. Drant, A. Gonzalez--Moreau, and C. Servouin, “Semi-automatic robot assisted, clean assembly of PIP-II LB650 cavity string at CEA”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 587-589. doi:10.18429/JACoW-SRF2025-THB01
[n] T. Phimsen, B. C. Jiang, N. Juntong, P. Sudmuang, and Z. T. Zhao, “Improvement of Touschek Lifetime by Higher Harmonic RF Cavity in the SPS Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1669-1672. doi:10.18429/JACoW-IPAC2019-TUPGW110
[n] F. W. Jones and W. Herr, “Parallel Computation of Beam-Beam Interactions Including Longitudinal Motion”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB059, pp. 3404-3406.
[n] J. Xu et al., “Comparison of Different Electromagnetic Solvers for Accelerator Simulations”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEP08, pp. 155-157.
[n] G. K. Sahoo, F. Brinker, and F. Wedtstein, “Orbitkorrektur, a Java Client for Transverse Orbit Correction in PETRA-III”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 120-122. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO22
[n] Y.-M. Shin et al., “Simulation Analysis on Micro-Bunched Density Modulation from a Slit-Masked Chicane”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1509-1511. doi:10.18429/JACoW-IPAC2014-TUPME060
[n] S. C. Snowdon, “Mechanical and Thermal Stresses in Superconducting Accelerator and Beam-Line Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1254-1257.
[n] J. B. Rosenzweig et al., “Experimental Measurement of Nonlinear Plasma Wake-Fields”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 731-734.
[n] S. Cierjacks, B. Duelli, L. Kropp, M. L?Âsel, H. Schweickert, and H. Unseld, “A Novel Deflection-Bunching System at the Karlsruhe Isochronous Cyclotron Used with a Neutron Time-of-Flight-Spectrometer”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-007, pp. XX-XX.
[n] H. Zen, T. Tanikawa, M. Adachi, M. Katoh, M. Hosaka, and N. Yamamoto, “Chirped Pulse Generation by CHG-FEL”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA18, pp. 366-369.
[n] B. I. Bondarev, “Intense Ion Beam Transport and Space Charge Redistribution”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP59, pp. 208-209.
[n] M. Munoz, “Assessment of the Achievable Emittance Ratio in DIAMOND”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP042L, pp. 938-940.
[n] P. J. Bell, V. H. Hardion, and V. Michel, “100Hz Data Acquisition in the TANGO Control System at the Max IV Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 209-211. doi:10.18429/JACoW-ICALEPCS2015-MOPGF049
[n] Y. Iino et al., “Fabrication Technique of Drift Tube with Permanent Quadrupole Magnet for the Linac of the JHP”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO429, pp. 123-125.
[n] S. Persichelli et al., “Impedance Studies of the Dummy Septum for CERN PS Multi-turn Extraction”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1704-1707. doi:10.18429/JACoW-IPAC2014-TUPRI058
[n] W. An, C. Joshi, W. Lu, W. B. Mori, M. J. Hogan, and C. Huang, “Preliminary Simulations of Plasma Wakefield Accelerator Experiments at FACET”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP016, pp. 136-138.
[n] R. Baartman and Y.-N. Rao, “Gap-Crossing Resonance In Cyciae-100 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 406-408.
[n] L. B. Tecchio, “The Radioactive Ion Beam Facility Project for the Legnaro Laboratories”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA72, pp. 3558-3560.
[n] R. J. Faehl and G. Gisler, “Intense Ion Ring Acceleration in a Flux Compressing Liner”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3201-3204.
[n] W. Zhang, J. Bunicci, W. W. Frey, A. V. Soukas, and S. Y. Zhang, “The Booster-to-AGS Beam Transfer Fast Kicker Modulators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 999-1002.
[n] O. Holme, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “Improving Code Quality of the Compact Muon Solenoid Electromagnetic Calorimeter Control Software to Increase System Maintainability”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC088, pp. 306-309.
[n] S. Yamaguchi et al., “Development of an RF Pulse Compressor Using a Traveling-Wave Resonator”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-51, pp. 478-480.
[n] M. Berz, K. Joh, J. A. Nolen, B. M. Sherrill, and A. F. Zeller, “On-Line Correction of Aberrations in Particle Spectrographs”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 884-887.
[n] K. M. Terwilliger, “Orbit Dynamics for a Four-Spiral-Sector Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A16, pp. 73-75.
[n] R. Stefanic, J. Dedic, R. Tavcar, J. Gutleber, and R. Moser, “Timing-system Solution for MedAustron; Real-time Event and Data Distribution Network”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN015, pp. 909-911.
[n] K. Beard, L. Merminga, and B. Yunn, “Tools to Predict Beam Breakup in Recirculating Linacs”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPD006, pp. 332-334.
[n] J. S. Berg et al., “A Non-scaling Fixed Field Alternating Gradient Accelerator for the Final Acceleration Stage of the International Design Study of the Neutrino Factory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ007, pp. 832-834.
[n] L. M. Volpe et al., “High Heat Load Front Ends for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 324-326. doi:10.18429/JACoW-MEDSI2016-WEPE06
[n] V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 689-692. doi:10.18429/JACoW-ICALEPCS2015-WEPGF001
[n] K.-J. Kim and Y.-J. Chen, “RF and Space-Charge Induced Emittances in Laser-Driven RF Guns”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-08, pp. 322-324.
[n] W. K. Kim et al., “Fabrication and Low Temperature Test Plan for Rare Isotope Science Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 619-621. doi:10.18429/JACoW-LINAC2016-TUPLR072
[n] K. P. Przygoda, C. Gerth, H. Schlarb, and B. Steffen, “MTCA.4-based Beam Line Stabilization Application”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2808-2810. doi:10.18429/JACoW-IPAC2016-WEPOR060
[n] A. A. Lutman, P. Craievich, G. Penco, R. Vescovo, and J. Wu, “Impact on a Seeded Harmonic Generation FEL of an Initial Energy Chirp and Curvature in the Electron Bunch Energy Distribution”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOOB04, pp. 27-30.
[n] S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB05, pp. 819-821.
[n] G. Stanford et al., “Mechanical Design, Construction and Alignment of the ISAC RFQ Accelerator at TRIUMF”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4094, pp. 980-982.
[n] F. Guatieri, C. Milardi, and D. Orsucci, “Numerical Technique for Nonlinear Beam-based Alignment”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1778-1780. doi:10.18429/JACoW-IPAC2014-TUPRI089
[n] J. Esberg, “Simulations of the Interaction Point for TeV-scale e+ e– Colliders”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC001, pp. 985-987.
[n] T. Inagaki et al., “High-power tests of the compactly HOM-damped TM020-cavities for a next generation light source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2635-2638. doi:10.18429/JACoW-IPAC2023-WEODC3
[n] S. Redaelli, M. Lamont, G. J. Müller, R. Tomas, J. Wenninger, and N. Ryckx, “Combined Ramp and Squeeze at the Large Hadron Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC016, pp. 157-159.
[n] W. Zhang, L. A. Ahrens, J. L. Mi, B. Oerter, J. Sandberg, and R. Sanders, “RHIC Beam Abort Kicker Power Supply System Commissioning Experience and Remaining Issues”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH021, pp. 3711-3713.
[n] X. P. Ding et al., “Influence of Proton Beam Emittances on Particle Production off a Muon Collider Target”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI069, pp. 1511-1513.
[n] M. Streichert et al., “Global Scan of All Stable Settings (GLASS) for the ANKA Storage Ring”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THP09, pp. 239-241.
[n] P. Goudket, C. D. Beard, and G. Burt, “Coupler Design Considerations for the ILC Crab Cavity”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH159, pp. 430-432.
[n] F. J. Haasbroek, P. Andersen, J. H. Langenhoven, F. M. Nortier, T. Rossouw, and T. N. Van der Walt, “Production of Radionuclides at the NAC Cyclotron Facility”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-08, pp. 559-562.
[n] M. Lindroos et al., “ESS Progressing into Construction”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4266-4270. doi:10.18429/JACoW-IPAC2016-FRYAA02
[n] F. Sonnemann, K. Dahlerup-Petersen, F. Rodriguez-Mateos, and R. Schmidt, “Energy Extraction for the LHC Superconducting Circuits”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH093, pp. 3448-3450.
[n] N. Tsoupas et al., “Design of a Thin Quadrupole to be Used in the AGS Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS103, pp. 3723-3725.
[n] V. Litvinenko, Y. C. Jing, I. Pinayev, G. Wang, D. F. Ratner, and V. Samulyak, “Testing Aspects of Advanced Coherent Electron Cooling Technique”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 445-448. doi:10.18429/JACoW-IPAC2015-MOPJE062
[n] G. Parzen, “A High Field Magnet for the Alternating-Gradient Synchrotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 359-362.
[n] G. Chen et al., “Commissioning of RF System of the 200 MeV Proton Cyclotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2877-2879. doi:10.18429/JACoW-IPAC2019-WEPRB030
[n] V. D. Dougar-Zhabon, E. A. Lamzin, Yu. P. Severgin, I. A. Shukeilo, and A. M. Umnov, “Some Methods of Generation of Multicharged Ions of Radioactive and Stable Isotopes”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP06A, pp. 1406-1408.
[n] W. B. Bayer et al., “High Intensity Heavy Ion Beam Emittance Measurements at the GSI UNILAC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN012, pp. 1413-1415.
[n] P.-A. Chamouard and M. Olivier, “Improvement in the 20 MeV Beam Brightness at SATURNE”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB02, pp. 372-375.
[n] L. Ducimeti re, G. H. Schroeder, J. Uythoven, and E. Vossenberg, “Upgrading of the SPS Injection Kicker System for LHC Requirements”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP20H, pp. 2275-2277.
[n] H. Nishimura and T. Scarvie, “Estimation of the Effective Magnet Misalignments of the ALS Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE062, pp. 3559-3560.
[n] V. P. Suller, “Review of the Status of Synchrotron Radiation Storage Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 77-82.
[n] T. R. Edgecock and E. H. M. Wildner, “The EUROnu Project: A High Intensity Neutrino Oscillation Facility in Europe”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUOAA01, pp. 894-896.
[n] S. R. Conviser, “The Stanford Two-Mile Linear Accelerator Vacuum System”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 699-705.
[n] C. Bungau et al., “GEANT4 Studies of Magnets Activation in the HEBT Line for the European Spallation Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA038, pp. 3714-3716.
[n] T. Hori and T. Takayama, “Status of AURORA-2S" and its Facility for X-ray Lithography "”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A15, pp. 628-630.
[n] E. D. Hudson, R. S. Lord, and W. H. White Jr, “Operating Characteristics of the ORIC Beam Extraction System”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-008, pp. XX-XX.
[n] P. Bellomo, A. R. Donaldson, and D. MacNair, “B-Factory Intermediate DC Magnet Power Systems Reliability Modeling and Results”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH011, pp. 3684-3686.
[n] A.Gotz, A.Homs, B.Regad, M.Perez, P.Makijarvi, W.D.Klotz, “Modernising the ESRF Control System with GNU/Linux”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP023, pp. XX-XX.
[n] I. N. Nesterenko, D. N. Shatilov, and E. A. Simonov, “Beam-Beam Effects Simulation for VEPP-2M with the Flat and the Round Beams”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8V004, pp. 1762-1764.
[n] M. P. Reiser, H. Kim, and D. LeVine, “Conversion Studies for the SREL 600-MeV Synchrocyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69H08, pp. XX-XX.
[n] X. F. Tian and C.-F. Wu, “Theory Calculation of PASER in Gas Mixture Active Medium”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA029, pp. 1211-1213.
[n] R. Rohatgi, H. A. Schwettman, and T. I. Smith, “A Compact Energy Recovered FEL for Biomedical and Material Science Applications”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 230-233.
[n] M. Schenk et al., “Practical Stabilisation of Transverse Collective Instabilities with Second Order Chromaticity in the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4477-4480. doi:10.18429/JACoW-IPAC2017-THPVA026
[n] L. Picardi, C. Ronsivalle, A. Tata, and A. Vignati, “The Italian IORT Project""”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B04, pp. 2545-2547.
[n] M. T. Lynch, “The RF System for the Accelerator Production of Tritium (APT) Low Energy Demonstration Accelerator (LEDA) at Los Alamos”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP20, pp. 692-694.
[n] K. Ohmi, L. Mether, D. Schulte, and F. Zimmermann, “Study of Electron Cloud Instabilities in FCC-hh”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2007-2009. doi:10.18429/JACoW-IPAC2015-TUPTY006
[n] X. Xu, R. S. Callin, R. Fowkes, A. Menegat, G. P. Scheitrum, and D. H. Whittum, “RF Breakdown Studies in X-Band Klystron Cavities”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P032, pp. 3045-3047.
[n] S. G. Arutunian and M. R. Mailian, “Synchrotron Radiation Spatial Structures inside the Bunch”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP120G, pp. 1455-1457.
[n] C. L. Bohn et al., “Physics Goals for the Planned Next Linear Collider Engineering Test Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH048, pp. 3783-3785.
[n] R. Kato, K. Furuhashi, G. Isoyama, S. Kashiwagi, M. Morio, and Y. Terasawa, “Longitudinal Phase-space and Transverse Slice Emittance Measurements of High-brightness Electron Beams”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC21, pp. 293-296.
[n] M. Yamamoto, T. Higo, and K. Takata, “Analysis of Detuned Structure by Open Mode Expansion”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-94, pp. 299-301.
[n] C. Gaspar et al., “The LHCb Experiment Control System: on the Path to Full Automation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOBAUST06, pp. 20-23.
[n] S. Y. Zhang, “Thyristor Converter Simulation and Analysis”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1005-1008.
[n] R. G. Eichhorn, J. A. Robbins, and V. Veshcherevich, “Thermal and Mechanical Analysis of a Waveguide to Coax Symmetric Coupler for Superconducting Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3434-3436. doi:10.18429/JACoW-IPAC2015-WEPTY067
[n] B. Anderberg et al., “The 500 MeV Injector for MAX-lab using a Recirculated Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B06, pp. 1687-1692.
[n] D. Jeon et al., “Overview of the RISP Superconducting Linac”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper THA02, pp. 197-197.
[n] O. Seify, H. Ghasem, S. Kashani, and J. Rahighi, “Design and Construction of a Prototype Sputter ion Pump in ILSF”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2323-2325. doi:10.18429/JACoW-IPAC2014-WEPME030
[n] T.-Y. Lee, J. Lee, S. Shin, C. U. Choi, and M. Chung, “Cyclotrons for Accelerator-Driven Systems”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 305-307. doi:10.18429/JACoW-NAPAC2016-TUPOA10
[n] F. Ye et al., “Upgrading the SFC”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-15, pp. 78-81.
[n] L. Shang, D. M. Jiang, Y. J. Pei, L. Wang, X. Q. Wang, and F. Zhao, “Study of Ceramic Vacuum Chambers in HLS New Injection System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH308, pp. 2418-2419.
[n] R. H. Miller, “Measurements of the SLAC Injector Emittance”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-05, pp. 65-71.
[n] I. Gonin et al., “A Study of Multipactor Phenomena in the 52 MHz PETRA II Cavity at DESY”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2197-2200.
[n] Y. A. Kot and F. J. Willeke, “On Increasing the HERA Luminosity”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS054, pp. 667-669.
[n] Y. Petenev, A. V. Bondarenko, and A. N. Matveenko, “Modeling of the Beam Break Up Instability for BERLinPro”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS051, pp. 718-720.
[n] A. V. Shemyakin et al., “Performance of Fermilab's 4.3 MeV Electron Cooler”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS069, pp. 1654-1656.
[n] A. I. Dzergach, V. S. Kabanov, A. M. Sessler, and J. S. Wurtele, “About the Realization of Laser Acceleration Schemes based on Plasmoids in RF Wells”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP46C, pp. 821-823.
[n] M. Hosaka et al., “Recent Research Activities of the UVSOR-FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP009, pp. XX-XX.
[n] S. Posen, M. Liepe, and Th. Proslier, “Nb3Sn Materials Studies”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP019, pp. 92-94.
[n] D. P. Gurd, “Management of a Large, Distributed Control System Development Project”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUDI002, pp. XX-XX.
[n] G. H. Rees, “Status Report on ISIS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 830-834.
[n] F. Scantamburlo, R. Dima, A. Pepato, and C. Roncolato, “Production and Quality Control of the First Modules of the IFMIF-EVEDA RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB015, pp. 38-40.
[n] S. I. Striganov, N. V. Mokhov, and I. S. Tropin, “Reducing Backgrounds in the Higgs Factory Muon Collider Detector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1081-1083. doi:10.18429/JACoW-IPAC2014-TUPRO029
[n] G. M. Kazakevich, R. P. Johnson, T. N. Khabiboulline, V. A. Lebedev, G. V. Romanov, and V. P. Yakovlev, “A Novel Technique for Pulsed Operation of Magnetrons without Modulation of Cathode Voltage”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 290-293. doi:10.18429/JACoW-NAPAC2019-MOPLO24
[n] M. E. Castro Carballo, “Application of Single Crystal Diamonds (scCVD) as Beam Conditions Monitors at LHC”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA08, pp. 344-346.
[n] A. Takagi, Y. Irie, I. Sugai, and Y. Takeda, “Temperature Measurements of Carbon Stripper Foil by Pulsed 650keV H- Ion Beam”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP108, pp. 3620-3622.
[n] G. Decker and X. Sun, “Observation of Coherent Microwave Transition Radiation in the APS Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG041, pp. 2688-2690.
[n] Y. Z. Chen, J. Chen, Z. C. Chen, Y. B. Leng, Y. B. Yan, and W. M. Zhou, “SSRF Injector Diagnostics Commissioning Results”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC014, pp. 1074-1076.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Schoefer et al., “Increasing the AGS Beam Polarization with 80 Tune Jumps”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUXA03, pp. 1015-1019.
- G. Ren, D. H. He, W. Li, Y. Li, and M. Zeng, “Study of Diamond Detector Application at the Front End of a High Intensity Hadron Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 972-974.
- P. Ch. Chochula, A. Augustinus, P. M. Bond, A. N. Kurepin, M. Lechman, and O. Pinazza, “The Evolution of the ALICE Detector Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1087-1090.
- S. Ackermann, V. Miltchev, and J. Rossbach, “Transverse Phase-space Studies for the Electron Optics at the Direct XUV-seeding Experiment at FLASH (DESY)”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPA31, pp. 263-266.
- Y. Sun and M. Borland, “Alternate Lattice Design for Advanced Photon Source Multi-Bend Achromat Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1803-1805.
- R. W. Assmann, S. Redaelli, and W. Scandale, “Optics Study for a Possible Crystal-based Collimation System for the LHC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS017, pp. 1526-1528.
- G. Olry et al., “Design and Industrial Fabrication of Beta=0.35 Spoke-type Cavity”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO035, pp. 2271-2273.
- M. G. Billing, M. Giannella, R. M. Littauer, and G. R. Rouse, “Interaction of CESR Vacuum Pumps with Stored Beam”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1163-1166.
- M. V. Fisher, L. Assoufid, J. L. McChesney, J. Qian, R. Reininger, and F. M. Rodolakis, “Minimizing Grating Slope Errors in the IEX Monochromator at the Advanced Photon Source”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 336-338.
- R. L. Poirier et al., “RF Tests on the Initial 2.8m Section of the 8m Long ISAC RFQ at TRIUMF”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4087, pp. 609-611.
- J. Bradley, J. D. Crnkovic, D. Stratakis, and M. J. Syphers, “Initial Studies into Longitudinal Ionization Cooling for the Muon g-2 Experiment”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1522-1525.
- R. De Maria and M. Solfaroli, “Smooth and Beta-Beating-Free Optics Transitions for HL-LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 472-475.
- K. Noda et al., “Beam Test on Ring Property in HIMAC Synchrotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 982-985.
- I. Pinayev, “Beam Postion Monitor for Energy Recovery Linac”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA15, pp. 361-363.
- P. Sing Babu, A. Goswami And V, and S. Pandit, “Simulation Study Of High Intensity Beam Bunching”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 376-378.
- M. M. Paoluzzi et al., “Beam Tests Using a Wide Band RF System Prototype in the CERN PS Booster”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3134-3137.
- F. Casagrande et al., “SNS 2.1K Cold Box Turn-down Studies”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH193, pp. 514-516.
- J.-F. Ostiguy, K. Y. Ng, R. M. Jones, Z. Li, and N. M. Kroll, “Comparative Study of Medium Damped and Detuned Linear Accelerator Structures”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH050, pp. 3789-3791.
- A. J. Dobbs, D. Adey, and L. Coney, “MICE Muon Beamline Particle Rate and Related Beam Loss in the ISIS Synchrotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ035, pp. 874-876.
- M. Yan, C. Behrens, C. Gerth, G. Kube, B. Schmidt, and S. Wesch, “Beam Profile Measurements Using a Fast Gated CCD Camera and a Scintillation Screen to Suppress COTR”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPB16, pp. 590-593.
- A. S. Fisher, R. C. Field, and L. Y. Nicolas, “Evaluating Beam-Loss Detectors for LCLS-2”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 678-681.
- M. W. Lin, D. R. Abercrombie, I. Jovanovic, and A. Rakhman, “Modeling and Experimental Update on Quasi-phase Matched Direct Laser Electron Acceleration In Density-modulated Plasma Waveguides”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA089, pp. 1325-1327.
- C. P. Neuman and P. G. O, “The Effect of Initial Energy Spread on Longitudinal Beam Modulations in an Electron Gun”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP021, pp. 1537-1539.
- J. H. Shao, H. Chen, and Q. Z. Xing, “Design of a C-band 6 MeV Standing-wave Linear Accelerating Structure”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC023, pp. 119-121.
- P. Beli et al., “Spiral Inflectors And Electrodes In The Central Region Of The Vincy Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 400-402.
- A. Streun, M. B?Âge, J. T. M. Chrin, and A. L??deke, “Correction of Imperfections in the SLS Storage Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP009, pp. 2282-2284.
- A. Brinkmann and J. Ziegler, “Dry-Ice Cleaning of RF-Structures at DESY”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 52-55.
- S. Berry, N. Bazin, J. Drant, A. Gonzalez--Moreau, and C. Servouin, “Semi-automatic robot assisted, clean assembly of PIP-II LB650 cavity string at CEA”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 587-589.
- T. Phimsen, B. C. Jiang, N. Juntong, P. Sudmuang, and Z. T. Zhao, “Improvement of Touschek Lifetime by Higher Harmonic RF Cavity in the SPS Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1669-1672.
- F. W. Jones and W. Herr, “Parallel Computation of Beam-Beam Interactions Including Longitudinal Motion”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB059, pp. 3404-3406.
- J. Xu et al., “Comparison of Different Electromagnetic Solvers for Accelerator Simulations”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WEP08, pp. 155-157.
- G. K. Sahoo, F. Brinker, and F. Wedtstein, “Orbitkorrektur, a Java Client for Transverse Orbit Correction in PETRA-III”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 120-122.
- Y.-M. Shin et al., “Simulation Analysis on Micro-Bunched Density Modulation from a Slit-Masked Chicane”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1509-1511.
- S. C. Snowdon, “Mechanical and Thermal Stresses in Superconducting Accelerator and Beam-Line Magnets”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1254-1257.
- J. B. Rosenzweig et al., “Experimental Measurement of Nonlinear Plasma Wake-Fields”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 731-734.
- S. Cierjacks, B. Duelli, L. Kropp, M. L?Âsel, H. Schweickert, and H. Unseld, “A Novel Deflection-Bunching System at the Karlsruhe Isochronous Cyclotron Used with a Neutron Time-of-Flight-Spectrometer”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-007, pp. XX-XX.
- H. Zen, T. Tanikawa, M. Adachi, M. Katoh, M. Hosaka, and N. Yamamoto, “Chirped Pulse Generation by CHG-FEL”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA18, pp. 366-369.
- B. I. Bondarev, “Intense Ion Beam Transport and Space Charge Redistribution”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP59, pp. 208-209.
- M. Munoz, “Assessment of the Achievable Emittance Ratio in DIAMOND”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP042L, pp. 938-940.
- P. J. Bell, V. H. Hardion, and V. Michel, “100Hz Data Acquisition in the TANGO Control System at the Max IV Linac”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 209-211.
- Y. Iino et al., “Fabrication Technique of Drift Tube with Permanent Quadrupole Magnet for the Linac of the JHP”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO429, pp. 123-125.
- S. Persichelli et al., “Impedance Studies of the Dummy Septum for CERN PS Multi-turn Extraction”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1704-1707.
- W. An, C. Joshi, W. Lu, W. B. Mori, M. J. Hogan, and C. Huang, “Preliminary Simulations of Plasma Wakefield Accelerator Experiments at FACET”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP016, pp. 136-138.
- R. Baartman and Y.-N. Rao, “Gap-Crossing Resonance In Cyciae-100 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 406-408.
- L. B. Tecchio, “The Radioactive Ion Beam Facility Project for the Legnaro Laboratories”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA72, pp. 3558-3560.
- R. J. Faehl and G. Gisler, “Intense Ion Ring Acceleration in a Flux Compressing Liner”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3201-3204.
- W. Zhang, J. Bunicci, W. W. Frey, A. V. Soukas, and S. Y. Zhang, “The Booster-to-AGS Beam Transfer Fast Kicker Modulators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 999-1002.
- O. Holme, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “Improving Code Quality of the Compact Muon Solenoid Electromagnetic Calorimeter Control Software to Increase System Maintainability”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC088, pp. 306-309.
- S. Yamaguchi et al., “Development of an RF Pulse Compressor Using a Traveling-Wave Resonator”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-51, pp. 478-480.
- M. Berz, K. Joh, J. A. Nolen, B. M. Sherrill, and A. F. Zeller, “On-Line Correction of Aberrations in Particle Spectrographs”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 884-887.
- K. M. Terwilliger, “Orbit Dynamics for a Four-Spiral-Sector Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A16, pp. 73-75.
- R. Stefanic, J. Dedic, R. Tavcar, J. Gutleber, and R. Moser, “Timing-system Solution for MedAustron; Real-time Event and Data Distribution Network”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN015, pp. 909-911.
- K. Beard, L. Merminga, and B. Yunn, “Tools to Predict Beam Breakup in Recirculating Linacs”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPD006, pp. 332-334.
- J. S. Berg et al., “A Non-scaling Fixed Field Alternating Gradient Accelerator for the Final Acceleration Stage of the International Design Study of the Neutrino Factory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ007, pp. 832-834.
- L. M. Volpe et al., “High Heat Load Front Ends for Sirius”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 324-326.
- V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 689-692.
- K.-J. Kim and Y.-J. Chen, “RF and Space-Charge Induced Emittances in Laser-Driven RF Guns”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-08, pp. 322-324.
- W. K. Kim et al., “Fabrication and Low Temperature Test Plan for Rare Isotope Science Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 619-621.
- K. P. Przygoda, C. Gerth, H. Schlarb, and B. Steffen, “MTCA.4-based Beam Line Stabilization Application”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2808-2810.
- A. A. Lutman, P. Craievich, G. Penco, R. Vescovo, and J. Wu, “Impact on a Seeded Harmonic Generation FEL of an Initial Energy Chirp and Curvature in the Electron Bunch Energy Distribution”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOOB04, pp. 27-30.
- S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB05, pp. 819-821.
- G. Stanford et al., “Mechanical Design, Construction and Alignment of the ISAC RFQ Accelerator at TRIUMF”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4094, pp. 980-982.
- F. Guatieri, C. Milardi, and D. Orsucci, “Numerical Technique for Nonlinear Beam-based Alignment”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1778-1780.
- J. Esberg, “Simulations of the Interaction Point for TeV-scale e+ e– Colliders”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC001, pp. 985-987.
- T. Inagaki et al., “High-power tests of the compactly HOM-damped TM020-cavities for a next generation light source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEODC3, pp. 2635-2638.
- S. Redaelli, M. Lamont, G. J. Müller, R. Tomas, J. Wenninger, and N. Ryckx, “Combined Ramp and Squeeze at the Large Hadron Collider”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC016, pp. 157-159.
- W. Zhang, L. A. Ahrens, J. L. Mi, B. Oerter, J. Sandberg, and R. Sanders, “RHIC Beam Abort Kicker Power Supply System Commissioning Experience and Remaining Issues”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH021, pp. 3711-3713.
- X. P. Ding et al., “Influence of Proton Beam Emittances on Particle Production off a Muon Collider Target”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI069, pp. 1511-1513.
- M. Streichert et al., “Global Scan of All Stable Settings (GLASS) for the ANKA Storage Ring”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper THP09, pp. 239-241.
- P. Goudket, C. D. Beard, and G. Burt, “Coupler Design Considerations for the ILC Crab Cavity”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH159, pp. 430-432.
- F. J. Haasbroek, P. Andersen, J. H. Langenhoven, F. M. Nortier, T. Rossouw, and T. N. Van der Walt, “Production of Radionuclides at the NAC Cyclotron Facility”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper K-08, pp. 559-562.
- M. Lindroos et al., “ESS Progressing into Construction”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4266-4270.
- F. Sonnemann, K. Dahlerup-Petersen, F. Rodriguez-Mateos, and R. Schmidt, “Energy Extraction for the LHC Superconducting Circuits”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH093, pp. 3448-3450.
- N. Tsoupas et al., “Design of a Thin Quadrupole to be Used in the AGS Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS103, pp. 3723-3725.
- V. Litvinenko, Y. C. Jing, I. Pinayev, G. Wang, D. F. Ratner, and V. Samulyak, “Testing Aspects of Advanced Coherent Electron Cooling Technique”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 445-448.
- G. Parzen, “A High Field Magnet for the Alternating-Gradient Synchrotron”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 359-362.
- G. Chen et al., “Commissioning of RF System of the 200 MeV Proton Cyclotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2877-2879.
- V. D. Dougar-Zhabon, E. A. Lamzin, Yu. P. Severgin, I. A. Shukeilo, and A. M. Umnov, “Some Methods of Generation of Multicharged Ions of Radioactive and Stable Isotopes”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP06A, pp. 1406-1408.
- W. B. Bayer et al., “High Intensity Heavy Ion Beam Emittance Measurements at the GSI UNILAC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN012, pp. 1413-1415.
- P.-A. Chamouard and M. Olivier, “Improvement in the 20 MeV Beam Brightness at SATURNE”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper PUB02, pp. 372-375.
- L. Ducimeti re, G. H. Schroeder, J. Uythoven, and E. Vossenberg, “Upgrading of the SPS Injection Kicker System for LHC Requirements”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP20H, pp. 2275-2277.
- H. Nishimura and T. Scarvie, “Estimation of the Effective Magnet Misalignments of the ALS Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE062, pp. 3559-3560.
- V. P. Suller, “Review of the Status of Synchrotron Radiation Storage Rings”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 77-82.
- T. R. Edgecock and E. H. M. Wildner, “The EUROnu Project: A High Intensity Neutrino Oscillation Facility in Europe”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUOAA01, pp. 894-896.
- S. R. Conviser, “The Stanford Two-Mile Linear Accelerator Vacuum System”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 699-705.
- C. Bungau et al., “GEANT4 Studies of Magnets Activation in the HEBT Line for the European Spallation Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA038, pp. 3714-3716.
- T. Hori and T. Takayama, “Status of AURORA-2S" and its Facility for X-ray Lithography "”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A15, pp. 628-630.
- E. D. Hudson, R. S. Lord, and W. H. White Jr, “Operating Characteristics of the ORIC Beam Extraction System”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-008, pp. XX-XX.
- P. Bellomo, A. R. Donaldson, and D. MacNair, “B-Factory Intermediate DC Magnet Power Systems Reliability Modeling and Results”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH011, pp. 3684-3686.
- A.Gotz, A.Homs, B.Regad, M.Perez, P.Makijarvi, W.D.Klotz, “Modernising the ESRF Control System with GNU/Linux”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP023, pp. XX-XX.
- I. N. Nesterenko, D. N. Shatilov, and E. A. Simonov, “Beam-Beam Effects Simulation for VEPP-2M with the Flat and the Round Beams”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8V004, pp. 1762-1764.
- M. P. Reiser, H. Kim, and D. LeVine, “Conversion Studies for the SREL 600-MeV Synchrocyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69H08, pp. XX-XX.
- X. F. Tian and C.-F. Wu, “Theory Calculation of PASER in Gas Mixture Active Medium”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA029, pp. 1211-1213.
- R. Rohatgi, H. A. Schwettman, and T. I. Smith, “A Compact Energy Recovered FEL for Biomedical and Material Science Applications”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 230-233.
- M. Schenk et al., “Practical Stabilisation of Transverse Collective Instabilities with Second Order Chromaticity in the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4477-4480.
- L. Picardi, C. Ronsivalle, A. Tata, and A. Vignati, “The Italian IORT Project""”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B04, pp. 2545-2547.
- M. T. Lynch, “The RF System for the Accelerator Production of Tritium (APT) Low Energy Demonstration Accelerator (LEDA) at Los Alamos”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP20, pp. 692-694.
- K. Ohmi, L. Mether, D. Schulte, and F. Zimmermann, “Study of Electron Cloud Instabilities in FCC-hh”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2007-2009.
- X. Xu, R. S. Callin, R. Fowkes, A. Menegat, G. P. Scheitrum, and D. H. Whittum, “RF Breakdown Studies in X-Band Klystron Cavities”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P032, pp. 3045-3047.
- S. G. Arutunian and M. R. Mailian, “Synchrotron Radiation Spatial Structures inside the Bunch”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP120G, pp. 1455-1457.
- C. L. Bohn et al., “Physics Goals for the Planned Next Linear Collider Engineering Test Facility”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH048, pp. 3783-3785.
- R. Kato, K. Furuhashi, G. Isoyama, S. Kashiwagi, M. Morio, and Y. Terasawa, “Longitudinal Phase-space and Transverse Slice Emittance Measurements of High-brightness Electron Beams”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC21, pp. 293-296.
- M. Yamamoto, T. Higo, and K. Takata, “Analysis of Detuned Structure by Open Mode Expansion”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-94, pp. 299-301.
- C. Gaspar et al., “The LHCb Experiment Control System: on the Path to Full Automation”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOBAUST06, pp. 20-23.
- S. Y. Zhang, “Thyristor Converter Simulation and Analysis”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1005-1008.
- R. G. Eichhorn, J. A. Robbins, and V. Veshcherevich, “Thermal and Mechanical Analysis of a Waveguide to Coax Symmetric Coupler for Superconducting Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3434-3436.
- B. Anderberg et al., “The 500 MeV Injector for MAX-lab using a Recirculated Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B06, pp. 1687-1692.
- D. Jeon et al., “Overview of the RISP Superconducting Linac”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper THA02, pp. 197-197.
- O. Seify, H. Ghasem, S. Kashani, and J. Rahighi, “Design and Construction of a Prototype Sputter ion Pump in ILSF”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2323-2325.
- T.-Y. Lee, J. Lee, S. Shin, C. U. Choi, and M. Chung, “Cyclotrons for Accelerator-Driven Systems”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 305-307.
- F. Ye et al., “Upgrading the SFC”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-15, pp. 78-81.
- L. Shang, D. M. Jiang, Y. J. Pei, L. Wang, X. Q. Wang, and F. Zhao, “Study of Ceramic Vacuum Chambers in HLS New Injection System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH308, pp. 2418-2419.
- R. H. Miller, “Measurements of the SLAC Injector Emittance”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper II-05, pp. 65-71.
- I. Gonin et al., “A Study of Multipactor Phenomena in the 52 MHz PETRA II Cavity at DESY”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2197-2200.
- Y. A. Kot and F. J. Willeke, “On Increasing the HERA Luminosity”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS054, pp. 667-669.
- Y. Petenev, A. V. Bondarenko, and A. N. Matveenko, “Modeling of the Beam Break Up Instability for BERLinPro”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS051, pp. 718-720.
- A. V. Shemyakin et al., “Performance of Fermilab's 4.3 MeV Electron Cooler”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS069, pp. 1654-1656.
- A. I. Dzergach, V. S. Kabanov, A. M. Sessler, and J. S. Wurtele, “About the Realization of Laser Acceleration Schemes based on Plasmoids in RF Wells”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP46C, pp. 821-823.
- M. Hosaka et al., “Recent Research Activities of the UVSOR-FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP009, pp. XX-XX.
- S. Posen, M. Liepe, and Th. Proslier, “Nb3Sn Materials Studies”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP019, pp. 92-94.
- D. P. Gurd, “Management of a Large, Distributed Control System Development Project”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUDI002, pp. XX-XX.
- G. H. Rees, “Status Report on ISIS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 830-834.
- F. Scantamburlo, R. Dima, A. Pepato, and C. Roncolato, “Production and Quality Control of the First Modules of the IFMIF-EVEDA RFQ”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB015, pp. 38-40.
- S. I. Striganov, N. V. Mokhov, and I. S. Tropin, “Reducing Backgrounds in the Higgs Factory Muon Collider Detector”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1081-1083.
- G. M. Kazakevich, R. P. Johnson, T. N. Khabiboulline, V. A. Lebedev, G. V. Romanov, and V. P. Yakovlev, “A Novel Technique for Pulsed Operation of Magnetrons without Modulation of Cathode Voltage”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 290-293.
- M. E. Castro Carballo, “Application of Single Crystal Diamonds (scCVD) as Beam Conditions Monitors at LHC”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA08, pp. 344-346.
- A. Takagi, Y. Irie, I. Sugai, and Y. Takeda, “Temperature Measurements of Carbon Stripper Foil by Pulsed 650keV H- Ion Beam”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP108, pp. 3620-3622.
- G. Decker and X. Sun, “Observation of Coherent Microwave Transition Radiation in the APS Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG041, pp. 2688-2690.
- Y. Z. Chen, J. Chen, Z. C. Chen, Y. B. Leng, Y. B. Yan, and W. M. Zhou, “SSRF Injector Diagnostics Commissioning Results”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC014, pp. 1074-1076.
Back to search