Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Sannibale, “Luminosity Optimization in DANE”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT09, pp. XX-XX.
[n] M. W. Reinsch et al., “Machine Parameter Studies for an FEL Facility Using STAFF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP073, pp. 1768-1770.
[n] M. Hoffmann Wallner et al., “Efficient RF components of solid-state amplifiers for Sirius storage ring's RF plant”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3586-3589. doi:10.18429/JACoW-IPAC2023-WEPM008
[n] D. D. Armstrong, E. A. Meyer, H. L. Rutkowski, and J. D. Schneider, “Progress Report on Testing of a 100-kV, 125-mA Deuteron Injector”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3009-3012.
[n] N. R. Pereira and R. O. Hunter, “Accelerating Particles with Transverse Cavity Modes”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3529-3532.
[n] M. Solfaroli Camillocci, M. Juchno, M. Lamont, M. Schaumann, E. Todesco, and J. Wenninger, “Feed-Forward Corrections for Tune and Chromaticity Injection Decay During 2015 LHC Operation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1489-1492. doi:10.18429/JACoW-IPAC2016-TUPMW026
[n] Z. Zhang, M. J. Hogan, Z. Huang, and A. Marinelli, “Twin Bunches at the FACET-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1778-1781. doi:10.18429/JACoW-IPAC2016-TUPOW017
[n] B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421.
[n] X. Wang et al., “Warm Magnetic Field Measurements of LARP HQ Magnet”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP174, pp. 1154-1156.
[n] C. F. Eckman, A. Andrews, Y. Kim, S. Setiniyaz, D. P. Wells, and A. W. Hunt, “Development of an Automatic MATLAB based Emittance Measurement Tool for the IAC Accelerators”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC055, pp. 1296-1298.
[n] T. Walter, M. Fenner, K. Kull, and H. Schlarb, “MicroTCA Technology Lab at DESY: Start-Up Phase Summary”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3659-3661. doi:10.18429/JACoW-IPAC2017-THOAB2
[n] D. L. Snyder, M. M. Ter-Pogossian, and L. J. Thomas Jr, “A Mathematical Model for Positron-Emission Tomography Systems Having Time-of-Flight Measurements”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3575-3584.
[n] A. Salehilashkajani et al., “Commissioning of the Prototype for a New Gas Curtain Beam Profile Monitor Using Beam Induced Fluorescence for HL-LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2709-2712. doi:10.18429/JACoW-IPAC2019-WEPGW093
[n] S. R. Lawrie, D. C. Faircloth, A. P. Letchford, M. Perkins, M. Whitehead, and T. Wood, “Installing the VESPA H- Ion Source Test Stand at RAL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 614-616. doi:10.18429/JACoW-IPAC2014-MOPRI015
[n] N. S. Kremnev et al., “Adjusting Unit of Longitudinal Field Coils for NICA HV Electron CoolerÔÇÖs Solenoid”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 127-128. doi:10.18429/JACoW-COOL2019-TUPS21
[n] W. Xu et al., “SRF Gun at BNL: First Beam and Other Commissioning Results”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THAA03, pp. 1001-1005.
[n] M. Krishnan et al., “Energetic Condensation Growth of MgB2 Thin-Films for SRF Applications”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO068, pp. 391-395.
[n] M. Bertucci et al., “Test, Diagnostics and Computed Tomographic Inspection of a Large Grain 3.9 GHz Prototype Cavity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1011-1014. doi:10.18429/JACoW-IPAC2017-MOPVA062
[n] G. Riddone et al., “Technical Specification for the CLIC Two-Beam Module”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP028, pp. 607-609.
[n] Q. Zhang, W. Li, and L. Wang, “Impedances Calculations of Bellows in HLS II Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA030, pp. 1784-1786.
[n] V. G. Khachatryan, W. Decking, A. Tarloyan, and V. M. Tsakanov, “Effect of Jitter and Quadrupole Alignment Errors on SASE FEL Performance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC013, pp. 94-96.
[n] E. B. Holzer, “Beam Diagnostic Challenges for High Energy Hadron Colliders”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper WEO2AB04, pp. 283-288.
[n] J. Q. Wang, L. Ma, and C. Zhang, “The BEPC II: Status and Early Commissioning”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZBKI02, pp. 53-57.
[n] M.-H. Chun et al., “Status and Progress of RF System for the PLS-II Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC023, pp. 2254-2256.
[n] H. Bluem, R. A. Rimmer, T. Schultheiss, and L. M. Young, “Normal Conducting CW RF Gun Design for High Performance Electron Beams”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC067, pp. 223-225.
[n] A. A. Aksoy et al., “Turkish Accelerator Center: The Status and Roadmap”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2921-2923. doi:10.18429/JACoW-IPAC2014-THPRO027
[n] P. Sch?Ânfeldt, A. Borysenko, N. Hiller, B. Kehrer, and A.-S. Mueller, “Studies for a Wakefield-Optimized Near-Field EO Setup at the ANKA Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 869-871. doi:10.18429/JACoW-IPAC2015-MOPHA038
[n] F. Bouly et al., “Construction of a 700 MHz Prototypical Cryomodule for the EUROTRANS ADS Proton Linear Accelerator”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO008, pp. 193-197.
[n] D. Bocian, F. Cerutti, B. Dehning, and A. P. Siemko, “Quench Limit Calculations for Steady State Heat Deposits in LHC Inner Triplet Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR036, pp. 4050-4052.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Sannibale, “Luminosity Optimization in DANE”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT09, pp. XX-XX.
- M. W. Reinsch et al., “Machine Parameter Studies for an FEL Facility Using STAFF”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP073, pp. 1768-1770.
- M. Hoffmann Wallner et al., “Efficient RF components of solid-state amplifiers for Sirius storage ring's RF plant”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM008, pp. 3586-3589.
- D. D. Armstrong, E. A. Meyer, H. L. Rutkowski, and J. D. Schneider, “Progress Report on Testing of a 100-kV, 125-mA Deuteron Injector”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3009-3012.
- N. R. Pereira and R. O. Hunter, “Accelerating Particles with Transverse Cavity Modes”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3529-3532.
- M. Solfaroli Camillocci, M. Juchno, M. Lamont, M. Schaumann, E. Todesco, and J. Wenninger, “Feed-Forward Corrections for Tune and Chromaticity Injection Decay During 2015 LHC Operation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1489-1492.
- Z. Zhang, M. J. Hogan, Z. Huang, and A. Marinelli, “Twin Bunches at the FACET-II”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1778-1781.
- B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421.
- X. Wang et al., “Warm Magnetic Field Measurements of LARP HQ Magnet”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP174, pp. 1154-1156.
- C. F. Eckman, A. Andrews, Y. Kim, S. Setiniyaz, D. P. Wells, and A. W. Hunt, “Development of an Automatic MATLAB based Emittance Measurement Tool for the IAC Accelerators”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC055, pp. 1296-1298.
- T. Walter, M. Fenner, K. Kull, and H. Schlarb, “MicroTCA Technology Lab at DESY: Start-Up Phase Summary”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3659-3661.
- D. L. Snyder, M. M. Ter-Pogossian, and L. J. Thomas Jr, “A Mathematical Model for Positron-Emission Tomography Systems Having Time-of-Flight Measurements”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3575-3584.
- A. Salehilashkajani et al., “Commissioning of the Prototype for a New Gas Curtain Beam Profile Monitor Using Beam Induced Fluorescence for HL-LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2709-2712.
- S. R. Lawrie, D. C. Faircloth, A. P. Letchford, M. Perkins, M. Whitehead, and T. Wood, “Installing the VESPA H- Ion Source Test Stand at RAL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 614-616.
- N. S. Kremnev et al., “Adjusting Unit of Longitudinal Field Coils for NICA HV Electron CoolerÔÇÖs Solenoid”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 127-128.
- W. Xu et al., “SRF Gun at BNL: First Beam and Other Commissioning Results”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THAA03, pp. 1001-1005.
- M. Krishnan et al., “Energetic Condensation Growth of MgB2 Thin-Films for SRF Applications”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO068, pp. 391-395.
- M. Bertucci et al., “Test, Diagnostics and Computed Tomographic Inspection of a Large Grain 3.9 GHz Prototype Cavity”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1011-1014.
- G. Riddone et al., “Technical Specification for the CLIC Two-Beam Module”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP028, pp. 607-609.
- Q. Zhang, W. Li, and L. Wang, “Impedances Calculations of Bellows in HLS II Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA030, pp. 1784-1786.
- V. G. Khachatryan, W. Decking, A. Tarloyan, and V. M. Tsakanov, “Effect of Jitter and Quadrupole Alignment Errors on SASE FEL Performance”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC013, pp. 94-96.
- E. B. Holzer, “Beam Diagnostic Challenges for High Energy Hadron Colliders”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper WEO2AB04, pp. 283-288.
- J. Q. Wang, L. Ma, and C. Zhang, “The BEPC II: Status and Early Commissioning”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOZBKI02, pp. 53-57.
- M.-H. Chun et al., “Status and Progress of RF System for the PLS-II Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC023, pp. 2254-2256.
- H. Bluem, R. A. Rimmer, T. Schultheiss, and L. M. Young, “Normal Conducting CW RF Gun Design for High Performance Electron Beams”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC067, pp. 223-225.
- A. A. Aksoy et al., “Turkish Accelerator Center: The Status and Roadmap”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2921-2923.
- P. Sch?Ânfeldt, A. Borysenko, N. Hiller, B. Kehrer, and A.-S. Mueller, “Studies for a Wakefield-Optimized Near-Field EO Setup at the ANKA Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 869-871.
- F. Bouly et al., “Construction of a 700 MHz Prototypical Cryomodule for the EUROTRANS ADS Proton Linear Accelerator”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO008, pp. 193-197.
- D. Bocian, F. Cerutti, B. Dehning, and A. P. Siemko, “Quench Limit Calculations for Steady State Heat Deposits in LHC Inner Triplet Magnets”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR036, pp. 4050-4052.
Back to search