Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. B. Tecchio et al., “Project of an Advanced ISOL Facility for Exotic Beams at LNL”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B08, pp. 2618-2620.
[n] C. Zannini, N. Biancacci, T. L. Rijoff, and G. Rumolo, “Electromagnetic Simulations for Non-ultrarelativistic Beams and Application to the CERN Low Energy Machines”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1718-1720. doi:10.18429/JACoW-IPAC2014-TUPRI063
[n] S. Stahl and J. A. MacLachlan, “Methods for Detailed Modeling of the Longitudinal Phasespace Dynamics for Beams in Cyclic Accelerators”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 842-845.
[n] R. Apel and H. Henke, “Design of an On-Axis Coupled Planar MM-Wave Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP64, pp. 812-814.
[n] S. D. Fartoukh, “Low-Beta Insertions Inducing Chromatic Aberrations in Storage Rings and their Local and Global Correction”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP037, pp. 3784-3786.
[n] W. Gai et al., “A High Resolution Spatial-temporal Imaging Diagnostic for High Energy Density Physics Experiments”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2819-2821. doi:10.18429/JACoW-IPAC2014-THOAB03
[n] K. H. Gil, H. J. Choi, J. Y. Huang, M. H. Jung, and J. H. Lim, “Analysis and Design of a New Kirkpatrick-Baez Mirror System for Microbeams”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2081-2083. doi:10.18429/JACoW-IPAC2014-WEPRO059
[n] Y. Arakaki, S. Arai, K. Niki, M. Okada, Y. Takeda, and M. Tomizawa, “A Change of Resonant Frequency of IH-Linac for Radioactive Nuclear Beams”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE006, pp. 864-866.
[n] Y. Yano, “Status of the RIKEN RIB Factory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUYKI02, pp. 700-702.
[n] F. F. Hall, “Proposed High Performance Refrigeration Cyles to Obtain Superconducting Operation of a Two-Mile Linear Accelerator at 1.85K, 1.45K, or 1.0K”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 711-716.
[n] D. Leitner et al., “Status Report and Recent Developments with VENUS”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOCO-A02, pp. 2-7.
[n] S. Seletskiy et al., “Precise Beam Velocity Matching for the Experimental Demonstration of Ion Cooling With a Bunched Electron Beam”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 356-359. doi:10.18429/JACoW-NAPAC2019-TUZBB3
[n] J. K. Spradlin, A. D. Palczewski, C. E. Reece, and H. Tian, “Analysis of Surface Nitrides Created During Doping" Heat Treatments of Niobium"”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 106-111. doi:10.18429/JACoW-SRF2019-MOP030
[n] R. Geng et al., “Experimental Studies of Electron Multipacting in CESR Type Rectangular Waveguide Couplers”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO006, pp. 2238-2240.
[n] J. Kay et al., “Engineering Solutions for the Diamond Double Double Bend Achromat Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 328-330. doi:10.18429/JACoW-IPAC2014-MOPRO102
[n] D. Pellegrini, R. Corsini, D. Gamba, and A. Latina, “Applications of PLACET2 to the CTF3 Combiner Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 462-464. doi:10.18429/JACoW-IPAC2015-MOPJE067
[n] Y. Mori, C. Ohmori, A. Schnase, and M. Yoshii, “MA RF Cavity for the KEK 12 GeV PS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A20, pp. 984-986.
[n] R. Veness et al., “Experience From the Construction of a New Fast Wire Scanner Prototype for the CERN- SPS and its Optimisation for Installation in the CERN-PS Booster”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 479-482. doi:10.18429/JACoW-IBIC2015-TUPB061
[n] Joonsun Kang, “DESIGN STUDY ON MAGNET AND RF SYSTEMS OF A 5 MeV H- CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P26, pp. XX-XX.
[n] M. Seidel et al., “Production of a 1.3 MW Proton Beam at PSI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUYRA03, pp. 1309-1313.
[n] X. Guan, “Linac for the Compact Pulsed Hadron Source Project at Tsinghua University Beijing”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS051, pp. 2607-2609.
[n] D. L. Borovina et al., “Accelerated Neutron-Induced Failure Tests of 3300-V IGBTs for the Spallation Neutron Source Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE039, pp. 1168-1170.
[n] A. France, “Advanced RF Design and Tuning Methods of RFQ for High Intensity Proton Linacs”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 34-38. doi:10.18429/JACoW-IPAC2014-MOZA02
[n] S. R. Koscielniak et al., “e- Linac for RIB”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper FROAAU06, pp. 907-912.
[n] W. A. Barth, G. Clemente, L. A. Dahl, S. Mickat, B. Schlitt, and W. Vinzenz, “Future Heavy Ion Linacs at GSI”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS031, pp. 2550-2552.
[n] J. D. Sherman et al., “Review of Scaled Penning H- Surface Plasma Source with Slit Emitters for High Duty Factor Linacs”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THALA002, pp. 284-286.
[n] T. Kuerzeder et al., “Development and Test of a New Cryostat Module for the Injector of the S-DALINAC”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP082, pp. 334-336.
[n] S. Brandenburg, T. Nijboer, H. Post, L. P. Roobol, H. W. Schreuder, and S. van der Veen, “AGOR Status Report”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper F-4, pp. XX-XX.
[n] A. P. Lee et al., “Emittance and Bunch Length Measurement of the Electron Beams from the NSRRC Photocathode Gun”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2974-2976. doi:10.18429/JACoW-IPAC2014-THPRO048
[n] J. Q. Li et al., “Development of an All Permanent Magnet ECR Ion Source for Low and Medium Charge State Ions Production”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 53-56. doi:10.18429/JACoW-HIAT2018-MOPB10
[n] V. V. Danilov et al., “Possible Experiments on Wave Function Localization Due to Compton Scattering”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA16, pp. 919-921.
[n] M. J. Syphers, “Muon G-2: An Interplay between Beam Dynamics and a Muon Decay Experiment at the Precision Frontier”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2266-2269. doi:10.18429/JACoW-IPAC2019-WEYYPLS1
[n] Y. Iwashita et al., “Beam Test Plan of Permanent Magnet Quadrupole Lens at ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE017, pp. 3380-3382.
[n] A. Bertarelli, G. Arnau-Izquierdo, F. Carra, A. Dallocchio, M. Gil Costa, and N. Mariani, “Research and Development of Novel Advanced Materials for Next-generation Collimators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THOBB03, pp. 2888-2890.
[n] J. Bahrdt, “Pushing the Limits of Short Period Permanent Magnet Undulators”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THOAI1, pp. 435-442.
[n] T. Thuillier et al., “First Plasma of the PHOENIX V3 ECR Ion Source”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 48-49. doi:10.18429/JACoW-ECRIS2016-TUAO05
[n] G. V. Stupakov, “Advances in Impedance Theory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR2PBI01, pp. 4270-4274.
[n] A. Miyamoto and S. Sasaki, “HiSOR-II, Compact Light Source with an Innovative Lattice Design”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO009, pp. 1464-1466.
[n] S. M. Kocimski et al., “An Electron Accelerator Based System for Assay of Transuranic Waste Barrels”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0036, pp. 427-429.
[n] T. Shidara, M. Akemoto, K. Takata, S. R. Takeda, and M. Yoshida, “RD on an X-Band Klystron Modulator for Japan Linear Collider”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO442, pp. 162-164.
[n] N. Pichoff and A. Lasheen, “A Space-charge Compatible Tomography" of Beam Phase-space Distributions"”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3358-3360. doi:10.18429/JACoW-IPAC2014-THPME056
[n] Z. G. He, Q. K. Jia, B. G. Sun, and X. H. Wang, “Commissioning of a Photoinjector in HLS”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA01, pp. 331-333.
[n] Q. Z. Xing et al., “Development Progress of the 7MeV Linac Injector for the 200MeV Synchrotron of Xi'an Proton Application Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2336-2338. doi:10.18429/JACoW-IPAC2017-TUPVA105
[n] H. Liang et al., “A High Heat Load Double Crystal Monochromator and Its Cryo Cooling System for Heps”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 430-434. doi:10.18429/JACoW-MEDSI2018-FROAMA02
[n] O. H. Rahman et al., “Cathode Performance during Two Beam Operation of the High Current High Polarization Electron Gun for eRHIC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2720-2722. doi:10.18429/JACoW-IPAC2015-WEPJE023
[n] M. P. Anania et al., “The ALPHA-X Beam Line: Toward a Compact FEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC71, pp. 172-175.
[n] B. I. Bondarev and A. P. Durkin, “Non-Coulomb Perturbations Influence on Beam Dynamics in Extended Accelerating/Focusing Channels”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG057, pp. 3002-3004.
[n] W. Fischer, “Linear Coupling Correction with N-Turn Maps”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB078, pp. 2222-2224.
[n] E. Thoeng and R. E. Laxdal, “Transient Study of Beam Loading and Feed-Forward LLRF Control of ARIEL Superconducting RF e-LINAC”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB114, pp. 902-905.
[n] A. Nadji, M. Belgroune, P. Brunelle, and L. Nadolski, “Refined Tracking Procedure for the SOLEIL Energy Acceptance Calculations”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB034, pp. 896-898.
[n] G. Ganetis and A. Prodell, “Results from Heater-Induced Quenches of a 4.5m Two-in-One Superconducting R&D Dipole for the SSC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3678-3681.
[n] Y. K. Batygin, C. Pillai, and L. Rybarcyk, “Beam Performance in H- Injector of LANSCE”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS043, pp. 697-699.
For LaTeX
Use Complete Form
For BibTeX
References
- L. B. Tecchio et al., “Project of an Advanced ISOL Facility for Exotic Beams at LNL”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B08, pp. 2618-2620.
- C. Zannini, N. Biancacci, T. L. Rijoff, and G. Rumolo, “Electromagnetic Simulations for Non-ultrarelativistic Beams and Application to the CERN Low Energy Machines”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1718-1720.
- S. Stahl and J. A. MacLachlan, “Methods for Detailed Modeling of the Longitudinal Phasespace Dynamics for Beams in Cyclic Accelerators”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 842-845.
- R. Apel and H. Henke, “Design of an On-Axis Coupled Planar MM-Wave Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP64, pp. 812-814.
- S. D. Fartoukh, “Low-Beta Insertions Inducing Chromatic Aberrations in Storage Rings and their Local and Global Correction”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP037, pp. 3784-3786.
- W. Gai et al., “A High Resolution Spatial-temporal Imaging Diagnostic for High Energy Density Physics Experiments”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2819-2821.
- K. H. Gil, H. J. Choi, J. Y. Huang, M. H. Jung, and J. H. Lim, “Analysis and Design of a New Kirkpatrick-Baez Mirror System for Microbeams”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2081-2083.
- Y. Arakaki, S. Arai, K. Niki, M. Okada, Y. Takeda, and M. Tomizawa, “A Change of Resonant Frequency of IH-Linac for Radioactive Nuclear Beams”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE006, pp. 864-866.
- Y. Yano, “Status of the RIKEN RIB Factory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUYKI02, pp. 700-702.
- F. F. Hall, “Proposed High Performance Refrigeration Cyles to Obtain Superconducting Operation of a Two-Mile Linear Accelerator at 1.85K, 1.45K, or 1.0K”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 711-716.
- D. Leitner et al., “Status Report and Recent Developments with VENUS”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOCO-A02, pp. 2-7.
- S. Seletskiy et al., “Precise Beam Velocity Matching for the Experimental Demonstration of Ion Cooling With a Bunched Electron Beam”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 356-359.
- J. K. Spradlin, A. D. Palczewski, C. E. Reece, and H. Tian, “Analysis of Surface Nitrides Created During Doping" Heat Treatments of Niobium"”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 106-111.
- R. Geng et al., “Experimental Studies of Electron Multipacting in CESR Type Rectangular Waveguide Couplers”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO006, pp. 2238-2240.
- J. Kay et al., “Engineering Solutions for the Diamond Double Double Bend Achromat Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 328-330.
- D. Pellegrini, R. Corsini, D. Gamba, and A. Latina, “Applications of PLACET2 to the CTF3 Combiner Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 462-464.
- Y. Mori, C. Ohmori, A. Schnase, and M. Yoshii, “MA RF Cavity for the KEK 12 GeV PS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A20, pp. 984-986.
- R. Veness et al., “Experience From the Construction of a New Fast Wire Scanner Prototype for the CERN- SPS and its Optimisation for Installation in the CERN-PS Booster”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 479-482.
- Joonsun Kang, “DESIGN STUDY ON MAGNET AND RF SYSTEMS OF A 5 MeV H- CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P26, pp. XX-XX.
- M. Seidel et al., “Production of a 1.3 MW Proton Beam at PSI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUYRA03, pp. 1309-1313.
- X. Guan, “Linac for the Compact Pulsed Hadron Source Project at Tsinghua University Beijing”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS051, pp. 2607-2609.
- D. L. Borovina et al., “Accelerated Neutron-Induced Failure Tests of 3300-V IGBTs for the Spallation Neutron Source Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE039, pp. 1168-1170.
- A. France, “Advanced RF Design and Tuning Methods of RFQ for High Intensity Proton Linacs”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 34-38.
- S. R. Koscielniak et al., “e- Linac for RIB”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper FROAAU06, pp. 907-912.
- W. A. Barth, G. Clemente, L. A. Dahl, S. Mickat, B. Schlitt, and W. Vinzenz, “Future Heavy Ion Linacs at GSI”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS031, pp. 2550-2552.
- J. D. Sherman et al., “Review of Scaled Penning H- Surface Plasma Source with Slit Emitters for High Duty Factor Linacs”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THALA002, pp. 284-286.
- T. Kuerzeder et al., “Development and Test of a New Cryostat Module for the Injector of the S-DALINAC”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP082, pp. 334-336.
- S. Brandenburg, T. Nijboer, H. Post, L. P. Roobol, H. W. Schreuder, and S. van der Veen, “AGOR Status Report”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper F-4, pp. XX-XX.
- A. P. Lee et al., “Emittance and Bunch Length Measurement of the Electron Beams from the NSRRC Photocathode Gun”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2974-2976.
- J. Q. Li et al., “Development of an All Permanent Magnet ECR Ion Source for Low and Medium Charge State Ions Production”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 53-56.
- V. V. Danilov et al., “Possible Experiments on Wave Function Localization Due to Compton Scattering”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA16, pp. 919-921.
- M. J. Syphers, “Muon G-2: An Interplay between Beam Dynamics and a Muon Decay Experiment at the Precision Frontier”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2266-2269.
- Y. Iwashita et al., “Beam Test Plan of Permanent Magnet Quadrupole Lens at ATF2”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE017, pp. 3380-3382.
- A. Bertarelli, G. Arnau-Izquierdo, F. Carra, A. Dallocchio, M. Gil Costa, and N. Mariani, “Research and Development of Novel Advanced Materials for Next-generation Collimators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THOBB03, pp. 2888-2890.
- J. Bahrdt, “Pushing the Limits of Short Period Permanent Magnet Undulators”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THOAI1, pp. 435-442.
- T. Thuillier et al., “First Plasma of the PHOENIX V3 ECR Ion Source”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 48-49.
- G. V. Stupakov, “Advances in Impedance Theory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR2PBI01, pp. 4270-4274.
- A. Miyamoto and S. Sasaki, “HiSOR-II, Compact Light Source with an Innovative Lattice Design”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPO009, pp. 1464-1466.
- S. M. Kocimski et al., “An Electron Accelerator Based System for Assay of Transuranic Waste Barrels”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0036, pp. 427-429.
- T. Shidara, M. Akemoto, K. Takata, S. R. Takeda, and M. Yoshida, “RD on an X-Band Klystron Modulator for Japan Linear Collider”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO442, pp. 162-164.
- N. Pichoff and A. Lasheen, “A Space-charge Compatible Tomography" of Beam Phase-space Distributions"”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3358-3360.
- Z. G. He, Q. K. Jia, B. G. Sun, and X. H. Wang, “Commissioning of a Photoinjector in HLS”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA01, pp. 331-333.
- Q. Z. Xing et al., “Development Progress of the 7MeV Linac Injector for the 200MeV Synchrotron of Xi'an Proton Application Facility”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2336-2338.
- H. Liang et al., “A High Heat Load Double Crystal Monochromator and Its Cryo Cooling System for Heps”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 430-434.
- O. H. Rahman et al., “Cathode Performance during Two Beam Operation of the High Current High Polarization Electron Gun for eRHIC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2720-2722.
- M. P. Anania et al., “The ALPHA-X Beam Line: Toward a Compact FEL”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC71, pp. 172-175.
- B. I. Bondarev and A. P. Durkin, “Non-Coulomb Perturbations Influence on Beam Dynamics in Extended Accelerating/Focusing Channels”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG057, pp. 3002-3004.
- W. Fischer, “Linear Coupling Correction with N-Turn Maps”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB078, pp. 2222-2224.
- E. Thoeng and R. E. Laxdal, “Transient Study of Beam Loading and Feed-Forward LLRF Control of ARIEL Superconducting RF e-LINAC”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB114, pp. 902-905.
- A. Nadji, M. Belgroune, P. Brunelle, and L. Nadolski, “Refined Tracking Procedure for the SOLEIL Energy Acceptance Calculations”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB034, pp. 896-898.
- G. Ganetis and A. Prodell, “Results from Heater-Induced Quenches of a 4.5m Two-in-One Superconducting R&D Dipole for the SSC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3678-3681.
- Y. K. Batygin, C. Pillai, and L. Rybarcyk, “Beam Performance in H- Injector of LANSCE”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS043, pp. 697-699.
Back to search