JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Weatherly, B. Freemire, C. Jing, E. Wisniewski, J. Power, and S. Doran, “Standing wave Dielectric Disk Accelerating structure design and cold test results”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB009, unpublished. 
[n]	R. Hampel, W. F. O. Muller, and T. Weiland, “A Dispersionless Algorithm for Calculating Wake Potentials in 3D”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN020, pp. 3268-3270. 
[n]	A. A. Aksoy, A. Latina, J. Pfingstner, D. Schulte, and Z. Nergiz, “Design Optimization of an X-band based FEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 793-796. doi:10.18429/JACoW-IPAC2016-MOPOW036
[n]	D. M. Grudzien, Y. Kang, R. Kustom, P. Matthews, and A. Nassiri, “Superconducting Nb Accelerating Structure for a 50-MeV mm-wave Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2051-2054. 
[n]	Y. K. Batygin, “Longitudinal Beam Dynamics in Array of Equidistant Multicell Cavities”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 609-612. doi:10.18429/JACoW-LINAC2022-TUPORI26
[n]	G. E. Krafczyk, C. C. Jensen, H. Pfeffer, and G. J. Warchol, “A Dual Triangle Timing Circuit for Improved Performance of 4-Quadrant H-Bridge Switchers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP008, pp. 1547-1549. 
[n]	R. Chaput and M. A. Tordeux, “Present design of ELIOS electron linac injector of SOLEIL SR ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01G, pp. 708-710. 
[n]	F. Ames et al., “Status of the ECRIS Charge State Breeding Project at TRIUMF”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper WECO-A02, pp. 183-183. 
[n]	R. Bacher, “Commissioning of the New Control Systems for the PETRA3 Accelerator Complex at DESY”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOB004, pp. 7-9. 
[n]	R. Ischebeck et al., “Instrumentation and Results from the SwissFEL Injector Test Facility”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOBL1, pp. 12-18. 
[n]	R. D. Minea, M. M. Brasoveanu, E. Mazilu, M. R. Nemtanu, C. Oproiu, and N. Radulescu, “Accelerators Use for Irradiation of Fresh Medicinal Herbs”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF043, pp. 2371-2373. 
[n]	M. A. Bakr et al., “Design and Numerical Simulation of THz-FEL Amplifier in Kyoto University”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD65, pp. 519-522. 
[n]	D. Brandt et al., “Orbit Processign for LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1444-1447. 
[n]	A. Khan et al., “High-intensity Beam Accumulator Ring for Electron-Ion Collider”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1324, unpublished. 
[n]	Y. Han, L. Ma, C. Bayar, S. Doebert, A. Latina, and D. Schulte, “Update of the CLIC Positron Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 236-239. doi:10.18429/JACoW-IPAC2018-MOPMF055
[n]	A. Febel, H. Gerke, M. Tigner, H. Wiedemann, and B. H. Wilk, “The Proposed Desy Proton-Electron Colliding Beam Experiment”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 782-786. 
[n]	A. Gallo, D. Alesini, M. Bellaveglia, R. Boni, G. Di Pirro, and F. Tazzioli, “The SPARC RF Synchronization System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT006, pp. 1024-1026. 
[n]	S. L. Bogomolov et al., “Present Status of FLNR (JINR) ECR Ion Sources”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOBK02, pp. 17-19. 
[n]	Y. Wang, R. Li, Y. Du, Z. Dong, and H. Chen, “Generation of attosecond electron bunches through terahertz regulation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 863-865. doi:10.18429/JACoW-IPAC2024-MOPS62
[n]	Y. J. Han, J. Choi, J. Y. Huang, S. N. Kim, Y.-C. Kim, and I. S. Ko, “Photon Beam Position Monitor with Hydraulic Level System”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA054, pp. 398-400. 
[n]	W. Chupp, D. Clark, R. Richter, J. Staples, and E. Zajec, “Operation of a High-Current Xenon Source”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3036-3039. 
[n]	A. D. Yeremian, V. A. Dolgashev, J. Neilson, and S. G. Tantawi, “A Dual-mode Accelerating Cavity to Test RF Breakdown Dependence on RF Magnetic Fields”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC073, pp. 247-249. 
[n]	N. Eddy, B. J. Fellenz, P. S. Prieto, and S. Z. Zorzetti, “Transverse Damper Using Diodes for Slip Stacking in the Fermilab Recycler”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 267-269. doi:10.18429/JACoW-IBIC2017-TUPCF21
[n]	V. B. Graves et al., “Operation of a Free Hg Jet Delivery System in a High-Power Target Experiment”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP086, pp. 2703-2705. 
[n]	A. Melnikov, A. Aksentyev, S. Kolokolchikov, N. Nikolaev, and Y. Senichev, “Quasi-frozen spin concept to search for the electric dipole moment of the proton and deuteron”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1494-1497. doi:10.18429/JACoW-IPAC2025-TUPS033
[n]	S. Ghosh et al., “Commissioning of Superconducting Linac at IUAC - Initial Challenges and Solutions”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP127, pp. 856-858. 
[n]	C. Pagani et al., “First Operational Experience with the RF System of the LNS Superconducting Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1894-1897. 
[n]	A. A. Nosych et al., “Measurements and Calibration of the Stripline BPM for the ELI-NP facility with the Stretched Wire Method”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 423-427. doi:10.18429/JACoW-IBIC2015-TUPB048
[n]	A. M. Sessler, “The Electron Ring Accelerator”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-2, pp. 606-607. 
[n]	N. Jakhar, M. Kashyap, S. Kashyap, S. Kumar, J. Sharma, and C. Thakur, “Design of Pelletron accelerator using novel accelerating tube without gap insulators”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1637-1639. doi:10.18429/JACoW-IPAC2025-TUPS140
[n]	M. Oyaizu et al., “Wall Distribution of Ions Externally Injected for Charge-Breeding in ECRIS”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-22, pp. 120-122. 
[n]	F. Chautard and G. S?®n?®cal, “Operation Status of High Intensity Ion Beams at GANIL”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-07, pp. 54-58. 
[n]	O. Shelbaya, R. A. Baartman, O. K. Kester, S. Kiy, and S. D. Rädel, “Model Coupled Accelerator Tuning With an Envelope Code”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 549-551. doi:10.18429/JACoW-LINAC2022-TUPORI03
[n]	A. Shalnov, B.Yu. Bogdanovich, A. Ignatyev, and V. Senyukov, “RF-Power Upgrade Systems with Energy Compression for Electron Linacs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ23, pp. 1572-1574. 
[n]	A. Drago et al., “Commissioning of the BESSY-II Longitudinal Feedback System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A06, pp. 1903-1905. 
[n]	W. W. Gao, W. Li, and L. Wang, “Low Emittance Lattice Optimization Using Multiobjective Genetic Algorithm”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE001, pp. 4515-4517. 
[n]	M. Dehnel, K. Erdman, T. Kuo, and L. Root, “Injection System Design and Test for the TR13 Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2367-2370. 
[n]	Y. Kim, M. Dohlus, K. Floettmann, T. Limberg, and D. Son, “Injector and Bunch Compressor for the European XFEL Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF018, pp. 342-344. 
[n]	L. M. Lederman, “Status and Outlook for International Collaboraton on Future Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 2014-2018. 
[n]	A. E. Dabrowski et al., “Measuring the Bunch Frequency Multiplication at CTF3”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE058, pp. 1107-1109. 
[n]	T. Mitsumoto et al., “Orbit Analysis of the RIKEN Superconducting Ring Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-16, pp. 507-510. 
[n]	N. Rider et al., “Bunch-By-Bunch Instrumentation Upgrades For CESR, Based On Requirements For The CESR Test Accelerator Research Program”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST02, pp. 88-90. 
[n]	J. Ohnishi, Y. Higurashi, and T. Nakagawa, “Practical Use of High-Temperature Oven for 28 GHz Superconducting  ECR Ion Source at RIKEN”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 180-184. doi:10.18429/JACoW-ECRIS2018-WEB4
[n]	C. C. Lo, B. Taylor, and K. Baptiste, “The Amplitude and Phase Control of the ALS Storage Ring RF System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR03, pp. 801-803. 
[n]	J. Aggus, D. Edwards, H. J. Halama, and J. Herrera, “Factors Determining the Choice of the Beam Tuber Material and the Vacuum Chamber Design for a Superconducting High Energy Storage Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4042-4045. 
[n]	C. Mallik, “Design of Focusing Channel Using Triplet Iron Bars for Calcutta Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-10, pp. 365-367. 
[n]	G. Andler et al., “Studies of Transverse Electron Cooling”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEOAF101, pp. 301-303. 
[n]	V. Kocharyan, E. Saldin, and G. Geloni, “Scheme to Increase the Output Average Spectral Flux of the European XFEL at 14.4 keV”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 251-256. doi:10.18429/JACoW-FEL2015-MOP085
[n]	C. Bovet, B. W. Montague, M. Placidi, and R. Rossmanith, “Polarization of Beams in LEP”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1911-1914. 
[n]	E. Plouviez, F. Epaud, J. M. Koch, and K. B. Scheidt, “Fast Orbit Correction for the ESRF Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO002, pp. 478-480. 
[n]	N. Banerjee et al., “Microphonics Studies of the CBETA Linac Cryomodules”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1138-1141. doi:10.18429/JACoW-IPAC2017-MOPVA122
[n]	J. Kallestrup, M. Aiba, N. Carmignani, and T. P. Perron, “A Dispersive Quadrupole Scan Technique for Transverse Beam Characterization”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 107-110. doi:10.18429/JACoW-IPAC2021-MOPAB021
[n]	A. M. Donyagin, A. Kovalenko, O. S. Kozlov, V. A. Mikhailov, V. A. Shchepunov, and A. Smirnov, “Preliminary Analysis of the Nuclotron Magnetic Field”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP077G, pp. 2281-2283. 
[n]	H. Stockhorst, B. Lorentz, R. Maier, D. Prasuhn, R. Stassen, and T. Katayama, “Simulation Study of Heavy Ion Beam Injection and Acceleration in the HESR for Internal Target Experiments with Cooling”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 768-770. doi:10.18429/JACoW-IPAC2014-MOPRI072
[n]	P. Sjöblom, H. Enquist, Á. Freitas, J. Lidón-Simon, M. Lindberg, and S. Malki, “Synchronized Nonlinear Motion Trajectories at MAX IV Beamlines”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1160-1165. doi:10.18429/JACoW-ICALEPCS2023-TH2BCO01
[n]	R. S. Larsen et al., “The ILC Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAA01, pp. 271-275. 
[n]	T. Takayanagi et al., “Measurement Results of the Characteristic of the Pulse Power Supply for the Injection Bump System in J-PARC 3-GeV RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP083, pp. 1742-1744. 
[n]	K. Nakayoshi, Y. Fujii, T. Nakadaira, and K. Sakashita, “Development of an Expert System for the High Intensity Neutrino Beam Facility at J-PARC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1229-1232. doi:10.18429/JACoW-ICALEPCS2017-THCPA07
[n]	P. Torrent, J-P. Airiau, and I. Issury, “Development and New Perspectives on the LMJ Power Conditioning Modules”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 415-418. doi:10.18429/JACoW-ICALEPCS2023-TUMBCMO23
[n]	E. M. Rowe, “Research Using Synchrotron Radiation”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 973-980. 
[n]	B. Giaccone, A. Grassellino, S. Posen, and A. S. Romanenko, “Dark Matter and Gravitational Waves Experiments with SRF Cavities”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper THIXA06, unpublished. 
[n]	J. W. Park et al., “STATUS OF THE KOMAC PROJECT”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THAM01, pp. XX-XX. 
[n]	R. M. Hutcheon, J. C. Brown, T. Tran-Ngoc, and R. A. Vokes, “The RF Design of a 270 MHz, cw Four Vane RFQ”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2769-2772. 
[n]	F. Schlie?ƒmann, M. Arnold, M. Dutine, and N. Pietralla, “Determination of the Momentum Spread While Running in the ERL Mode at the S-DALINAC”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 300-303. doi:10.18429/JACoW-IBIC2019-TUPP009
[n]	P. Thieberger et al., “Proposed Scattered Electron Detector System as One of the Beam Overlap Diagnostic Tools for the New RHIC Electron Lens”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP209, pp. 489-491. 
[n]	K. Ohmi et al., “Optics Measurement at the Interaction Point using Nearby Position Monitors in KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB012, pp. 1539-1541. 
[n]	J. H. Thie et al., “Mechanical Design of Automatic Cavity Tuning Machines”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO074, pp. 797-800. 
[n]	X. Pang, S.-Y. Lee, K. Y. Ng, F. Wang, and X. Wang, “Emittance Growth Scaling Laws in Resonance Crossing”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA21, pp. 118-127. 
[n]	B. Wang, H. Shi, and C. Yu, “Beam background study at BEPCII”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 753-755. doi:10.18429/JACoW-IPAC2023-MOPL084
[n]	G. Li and Y. G. Zhou, “Compact Digital High Voltage Charger”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE075, pp. 3964-3966. 
[n]	E. Mar?¡n et al., “Start-to-End Simulations of the Compact Light Project Based on an S-Band Injector and an X-Band LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1836-1839. doi:10.18429/JACoW-IPAC2019-TUPRB074
[n]	P. K. Saha et al., “Systematic Beam Loss Study due to the Foil Scattering at the 3-GeV RCS of J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB018, pp. 3921-3923. 
[n]	N. Gallou, B. P. Bielawski, A. Butterworth, M. Hostettler, M. Jaussi, and H. Timko, “Bunch length regulation in the LHC during controlled emittance blow-up”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2279-2282. doi:10.18429/JACoW-IPAC2025-WEPS018
[n]	G. Kim, D. Kwak, and M. Chung, “Studies of longitudinal phase space tomography using booster cavity and dipole spectrometer”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 813-817. doi:10.18429/JACoW-IBIC2025-WEPMO33
[n]	P. D. Hermes et al., “HL-LHC Beam Dynamics with Hollow Electron Lenses”, in Proc. HB'21, Batavia, IL, USA, Oct. 2021, pp. 59-64. doi:10.18429/JACoW-HB2021-MOP09
[n]	A. Fiebig and Ch. Schieblich, “A Radiofrequency Pulse Compressor for Square Output Pulses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1075-1078. 
[n]	M. M. Dehler et al., “Conceptual Design for SLS-2”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 150-153. doi:10.18429/JACoW-FLS2018-WEP2PT038
[n]	S. Huang, J. Y. Li, and Y. K. Wu, “Experiments on Madey Theorem with Optical Klystron Free-Electron Laser”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP069, pp. 1244-1244. 
[n]	T. Pulampong, P. Sudmuang, and P. Sunwong, “SPS-II machine imperfections and optimization”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 180-182. doi:10.18429/JACoW-IPAC2025-MOPB058
[n]	L. Palumbo et al., “Status of the SPARX FEL Project”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP019, pp. XX-XX. 
[n]	C. Deutsch, “Beam Dynamics for Heavy Ion Inertial Fusion”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-07, pp. 34-41. 
[n]	X. Yang et al., “The Terahertz FEL Facility Project at CAEP”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD49, pp. 484-486. 
[n]	E. J. Montgomery, J. E. Butler, C. Jing, S. Poddar, and S. Zhang, “Black Gun Technologies for DC Photoinjectors”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 247-248. doi:10.18429/JACoW-NAPAC2019-MOPLO06
[n]	E. Acerbi et al., “Progress Report on the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper B-02, pp. 26-29. 
[n]	E. J. Soderstrom et al., “Fast Energy Spectrum and Transverse Beam Profile Monitoring and Feedback Systems for the SLC Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1864-1867. 
[n]	N. Kanaya, N. Kobayashi, S. Suzuki, and S. Sato, “Design of the Magnet Control System for the 1.8-GeV Synchrotron Radiation Source at TSRF”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP527, pp. XX-XX. 
[n]	A. A. Aksoy, A. A. Aydin, C. Kaya, B. Ketenoglu, and O. Yavas, “TARLA: The First Facility of Turkish Accelerator Center (TAC)”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2776-2778. doi:10.18429/JACoW-IPAC2017-WEPAB087
[n]	D. Kaltchev, M. K. Craddock, R. V. Servranckx, and J. B. Jeanneret, “Numerical Optimization of Collimator Jaw Orientations and Locations in the LHC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P026, pp. 153-155. 
[n]	H. Lovelace III et al., “Injecting and Ramping Trapped Beam in Hadron Accelerator”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1304, unpublished. 
[n]	Y. Nosochkov and D. M. Ritson, “The Provision of IP Crossing Angles for the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 125-128. 
[n]	T. Shirai et al., “Electron Cooling Experiments at S-LSR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THM1I02, pp. 139-143. 
[n]	T. Kuo et al., “Development of a 15 mA DC H Multicusp Source for Cyclotron Injection”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-16, pp. 420-423. 
[n]	G. Velev, G. Ambrosio, G. Chlachidze, J. DiMarco, S. Stoynev, and T. Strauss, “Measurements of Decay and  Snapback in Nb?Sn Accelerator Magnets at Fermilab”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4342-4345. doi:10.18429/JACoW-IPAC2019-THPTS100
[n]	W. X. Wang, Z. G. He, S. M. Jiang, and H. R. Zhang, “Generation of Two Terahertz Radiation Pulses with Continuously Tunable Frequency and Time Delay”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1518-1520. doi:10.18429/JACoW-IPAC2019-TUPGW051

For LaTeX

Use Complete Form

For BibTeX

References

Back to search