Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Ferdinand, “Room Temperature Structure Development for High-Current Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THXKI02, pp. 2564-2568.
[n] M. P. Pretelli, F. Burini, G. T. Taddia, S. M. Tenconi, A. Lampasi, and P. Zito, “Switching Network Units for High Currents and Voltages or Plasma Applications”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 603-605. doi:10.18429/JACoW-RUPAC2016-THPSC028
[n] R. J. Dejus, “On the Issue of Phasing of Undulators at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE001, pp. 764-766.
[n] J. E. Spencer and B. Zotter, “Optics Effects & Optinons for TeV Colliders - II”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 481-484.
[n] J. L. Revol and E. Plouviez, “Diagnostics and Equipments for Single Bunch Operation at ESRF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1506-1509.
[n] A. Kondakov, S. A. Krutikhin, M. Kondaurov, S. V. Motygin, and A. M. Pilan, “RF STATION FOR ION BEAM STAKING IN HIRFL-CSR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUGO04, pp. XX-XX.
[n] P. Fehsenfeld et al., “Be-7 Beams for Wear Studies of Plastics, Elastomers and Ceramics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2664-2667.
[n] R. Bartolini and T. Pulampong, “Ultra-low Emittance Upgrade Options for Third Generation Light Sources”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA067, pp. 237-239.
[n] V. A. Polyakov and I. S. Shchedrin, “Electron Beam Guns for High Intensity Linear Accelerators and Technological Purposes”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1489-1492.
[n] Y. Xie, M. Liepe, D. Meidlinger, and H. Padamsee, “Thermal Modeling of Ring-Type Defects”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO048, pp. 331-333.
[n] F. D. Dziuba, M. Busch, H. Klein, H. Podlech, U. Ratzinger, and C. Zhang, “Development of Superconducting CH-Cavities for the EUROTRANS Injector Linac”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO017, pp. 578-581.
[n] K. G. Sonnad and J. R. Cary, “Halo Mitigation Using Nonlinear Lattices”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPB008, pp. 620-624.
[n] C. G. Whyte and J. C. Nugent, “RECENT RESULTS FROM MICE ON MULTIPLE COULOMB SCATTERING AND ENERGY LOSS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 598-600. doi:10.18429/JACoW-IPAC2019-MOPRB012
[n] J. T. Maniscalco, M. Liepe, and R. D. Porter, “Design Updates on Cavity to Measure Suppression of Microwave Surface Resistance by DC Magnetic Fields”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 754-758. doi:10.18429/JACoW-SRF2017-THPB005
[n] B. Littmann and H. Henke, “Feasibility Study of Optically Coupling RF-Power at mm Waves”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ30, pp. 1593-1595.
[n] R. Panas, A. M. Marendziak, A. I. Wawrzyniak, and M. Wisniowski, “Studies of The Electron Beam Lifetime in Solaris Electron Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1541-1543. doi:10.18429/JACoW-IPAC2019-TUPGW059
[n] A. Chao, “Summary Beam-beam Session, eeFACT2016 Workshop”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 203-205. doi:10.18429/JACoW-eeFACT2016-THS1H5
[n] S. H. Mirza, P. Forck, H. Klingbeil, and R. Singh, “Effect of Model Errors on the Closed Orbit Correction at the SIS18 Synchrotron of GSI”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2080-2083. doi:10.18429/JACoW-IPAC2018-WEPAK003
[n] A. S. Kesar, M. Hess, S. E. Korbly, and R. J. Temkin, “Smith-Purcell Radiation from a Charge Moving Above a Finite-Length Grating”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE016, pp. 1496-1498.
[n] K. Yonehara et al., “The MANX Muon Cooling Demonstration Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN110, pp. 2969-2971.
[n] M. Hu, “Fermilab Recycler Diagnostics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH066, pp. 1363-1365.
[n] T. Nakamura, K. Furukawa, T. T. Nakamura, and J.-I. Odagiri, “Upgrading the Control System of the Movable Masks for KEKB”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP074, pp. 546-548.
[n] K. Beckert et al., “Charge Exchange Extraction at the Experimental Storage Ring ESR at GSI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP06A, pp. 559-564.
[n] F. Gerigk, “LINAC4, A NEW H- LINEAR INJECTOR AT CERN”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUCI01, pp. XX-XX.
[n] R. Appleby, J. R. J. Bennett, T. A. Broome, C. Densham, and H. Vincke, “The Charged Beam Dumps for the International Linear Collider”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS079, pp. 736-737.
[n] F. Schlander, K. Aulenbacher, R. G. Heine, D. Simon, and T. Stengler, “1.3 GHz SRF Cryomodules for the Mainz Energy-recovering Superconducting Accelerator MESA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2853-2855. doi:10.18429/JACoW-IPAC2015-WEPMA041
[n] A. Garren and M. Sullivan, “Apiary B-Factroy Separation Scheme”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2844-2847.
[n] C. Gonzalez-Ortiz and R. Ainsworth, “Single-bunch instabilities at the Fermilab Recycler Ring”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 676-680. doi:10.18429/JACoW-NAPAC2025-WECD03
[n] W. Bartmann, J. L. Abelleira, F. Burkart, B. Goddard, J. Jentzsch, and R. Ostojic, “Sources of Emittance Growth at the CERN PS Booster to PS Transfer”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1352-1355. doi:10.18429/JACoW-IPAC2016-TUPMR046
[n] P. W. Schmor, “New Achievements At Triumf And Future Plans”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 93-98.
[n] H. Suk, D. Jang, M. Kim, and S. Oh, “A Gas-filled Capillary Plasma Source for Laser-driven Plasma Acceleration”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC009, pp. 4071-4073.
[n] S. Verd??-Andr?®s, R. Calaga, E. Cano-Pleite, R. Leuxe, and J. A. Mitchell, “Design of LHC Crab Cavities Based on DQW Cryomodule Test Experience”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 925-928. doi:10.18429/JACoW-SRF2019-THP035
[n] K. Nakanishi, K. Hara, K. Hosoyama, A. Kabe, and Y. Kojima, “Measurement of Hydrogen Absorbed in Niobium”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC021, pp. 2935-2937.
[n] R. W. Fast and M. A. Otavka, “Liquid Deuterium Neutron Attenuator for Broad-Band Photon Beam Facility”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1201-1204.
[n] S. Papadopoulou, F. Antoniou, J. E. Muller, Y. Papaphilippou, and G. Trad, “Modelling and Measurements of Bunch Profiles at the LHC Flat Bottom”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1477-1480. doi:10.18429/JACoW-IPAC2016-TUPMW022
[n] F. Chastel, P. Pluvy, and H. Rocipon, “Challenges of the XFEL Cryomodule Integration and Industry Transfer”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1929-1932. doi:10.18429/JACoW-IPAC2014-WEIB04
[n] O. Gr, “The LHC Vacuum System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8C001, pp. 3542-3546.
[n] J. Mondal, G. Ciovati, P. Kneisel, K. C. Mittal, and R. Myneni, “Characterization of Ingot Material for SRF Cavity Production”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOAAU01, pp. 455-461.
[n] E. Wang et al., “Beam Dynamics of Funneling Multiple Bunches Electrons”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM08, pp. 646-648.
[n] H. K. Kuhn and A. Hilaire, “The CERN SPS Low Beta Insertion Control System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2293-2296.
[n] L. Emery, M. Borland, and H. Shang, “Use of a General-Purpose Optimization Module in Accelerator Control”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE002, pp. 2330-2332.
[n] N. Cook, C. Phillips, D. Abell, M. Henderson, and P. Piot, “Fast and efficient modeling of structure-based wakefield accelerators”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEP036, unpublished.
[n] M. V. Alekseev et al., “Niobium Semiproducts for the Superconducting Strands and SRF Cavities in Russia”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 857-859. doi:10.18429/JACoW-SRF2019-THP011
[n] F.-J. Decker et al., “Emittance Control for Different FACET Beam Setups in the SLAC Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPLB01, pp. 138-140.
[n] D. Raparia, “RFQ Acceleration Section and Its Optimization”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-10, pp. 61-63.
[n] N. Chaisueb, S. Rimjaem, J. Saisut, and N. Kangrang, “Characterization and Simulations of Electron Beams Produced From Linac-Based Intense THz Radiation Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 131-134. doi:10.18429/JACoW-IBIC2016-MOPG38
[n] T. Saeki et al., “Study on Electro-Polishing Process by Niobium-Plate Sample With Artificial Pits”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO037, pp. 461-463.
[n] D. V. Neuffer, T. A. Mohayai, P. Snopok, and D. J. Summers, “Wedge Absorbers for Final Cooling for a High-Energy High-Luminosity Lepton Collider”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3832-3834. doi:10.18429/JACoW-IPAC2016-THPOR025
[n] J. Rose et al., “A SCRF Linac as a FEL Driver and Storage Ring Injector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB036, pp. 2808-2810.
[n] J. D. Fuerst, “The ATLAS Energy Upgrade Cryomodule”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOCAU04, pp. 52-56.
[n] T. J. Shea et al., “Beam Instrumentation for the RHIC Sextant Test”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1521-1524.
[n] P. Maccioni and J. L. Boutes, “Superconducting Cavities Manufacturing at CERCA”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D31, pp. 1090-1093.
[n] L. Van Loyen, D. Elefant, V. Palmieri, W. Venturini, and J. Halbritter, “Topography and Electrical Properties of Sputtered Niobium Films”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D35, pp. 1119-1124.
[n] S. A. Borsuk, “TUNING THE CELLS OF THE ACCELERATING STRUCTURE WITH RF-QUADRUPOLE DOUBLETS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUGP02, pp. XX-XX.
[n] T. Tran Ngoc and J.-P. Labrie, “Boiling Heat Transfer Process in the Design of High Power Linac Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-19, pp. 90-92.
[n] R. L. Warnock, “Revised View of Basic FEL Equations and a Nonlinear Vlasov Description”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA20, pp. 222-224.
[n] G. X. Xia, B. C. Jiang, and L. G. Liu, “Simulation of the Fast Ion Instability in SSRF Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD030, pp. 1991-1993.
[n] J. C. Dooling, L. I. Donley, G. E. McMichael, and V. F. Stipp, “Diagnostic and Numerical Studies of The IPNS Linac with A Recently Installed Buncher Amplifier”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU452, pp. 437-439.
[n] D. Trbojevic, A. J. Stevens, M. A. Harrison, F. Dell, and S. Peggs, “A Study of Betatron and Momentum Collimators in RHIC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P005, pp. 219-221.
[n] J. Alessi et al., “The New AGS H- RFQ Preinjector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 538-541.
[n] C. Bonavolont?á, V. Palmieri, V. Rampazzo, and M. Valentino, “Magnetic Field Sensors Applied to Electropolishing of Superconducting RF Tesla-Type Cavity”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA14, pp. 210-214.
[n] V. V. Zaitsev, “Obtaining af ArF Ions in Non-equilibrium Ion-molecular Energy-tense Systems”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1441-1444.
[n] A. Gonzalez, T. Maruta, P. Ostroumov, A. Plastun, K. Fukushima, and J. Wan, “Transverse beam dynamics studies in the FRIB accelerating cryomodules”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 618-621. doi:10.18429/JACoW-NAPAC2025-TUP102
[n] A. W. Cross, W. He, A. Phelps, K. Ronald, and H. Yin, “Pseudospark-sourced Beams of Electrons and Ions”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS089, pp. 1711-1713.
[n] T. Miura et al., “Low Level RF System for cERL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA048, pp. 1440-1442.
[n] Y. P. Vakhrushin et al., “The Present State of Activities on Development of the Superconducting RF-Structures for Electron Accelerators”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E01, pp. XX-XX.
[n] H. Hanaki, A. Asami, S. Ohsawa, and T. Takahashi, “Computer Design of Coupler Cavities for a Travelling-Wave-Type Buncher”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 910-913.
[n] M. Seidel, C. Adolphsen, R. Assmann, and D. H. Whittum, “Detection of Beam Induced Dipole-Mode Signals in the SLC S-Band Structures”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P086, pp. 2119-2121.
[n] F. Naito, M. Ikegami, T. Ito, T. Kato, E. Takasaki, and H. Tanaka, “Tuning of the RF Field of the DTL for the J-PARC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB049, pp. 2835-2837.
[n] S. De Silva, “Crabbing cavity system development for International Linear Collider”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 546-550. doi:10.18429/JACoW-LINAC2024-WEXA006
[n] M. E. Price and R. Yamada, “Short Sample Test of Superconducting Wire”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1190-1194.
[n] A. Lunin, I. G. Gonin, N. Solyak, and V. P. Yakovlev, “Final Results on RF and Wake Kicks Caused by the Couplers for the ILC Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE034, pp. 3431-3433.
[n] P. Chitnis and K. A. Brown, “Nonlinear System Identification of Superconducting Magnets of RHIC at BNL”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 90-93. doi:10.18429/JACoW-ICALEPCS2015-MOM310
[n] D. P. McGinnis, “FNAL Tevatron Operational Status”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOAA005, pp. 484-488.
[n] X. Sun, G. Decker, and N. Sereno, “Simulation Studies of Button Pickup Electrode Response to Longitudinally Tilted Beams”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG013, pp. 53-55.
[n] S.-W. Kim, “Quench Simulation Program for Superconducting Accelerator Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH096, pp. 3457-3459.
[n] Y. Y. Lau and D. G. Colombant, “Efficiency and Frequency Stability in a High Power Microwave Gap”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 637-640.
[n] J. Pivar and S. Hlava, “Bratislave Multipurpose Neutron Source”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 401-404.
[n] K. Saito, F. Furuta, and H. Umezawa, “Multi-wire Slicing of Large Grain Ingot Material”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOAAU05, pp. 467-472.
[n] G. Rumolo, J. B. Jeanneret, and D. Schulte, “Vacuum Specifications for the CLIC Main Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE024, pp. 3401-3403.
[n] G. Olry and B. Leluan, “Precise 3D Geometric Control of 700MHz SC Elliptical Cavities: RF Measurements vs. Theoretical Simulations”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR024, pp. XX-XX.
[n] J. G. Cogan, R. Bartoldus, D. W. Miller, and E. Strauss, “ATLAS Online Determination and Feedback of LHC Beam Parameters”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHAULT02, pp. 1306-1309.
[n] E. Syresin, N. A. Morozov, and D. Shvidkiy, “Comparisons and Simulations of Superconducting Dipole Magnets for JINR Carbon Ion Gantry”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2174-2176. doi:10.18429/JACoW-IPAC2014-WEPRO092
[n] W. Stein, “RIA Fragmentation Line Beam Dump”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB055, pp. 2847-2848.
[n] A. R. Rossi, A. Bacci, C. Maroli, V. Petrillo, and L. Serafini, “Study of the Beam Dynamics in a Linac with the Code RETAR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN032, pp. 3298-3300.
[n] I. S. K. Gardner, “A Review of Spallation Neutron Source Accelerators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUX03B, pp. 98-102.
[n] B. Han and M. P. Stockli, “The New LEBT for the Spallation Neutron Source Power Upgrade Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS075, pp. 1823-1825.
[n] J. R. Harris, D. T. Blackfield, G. J. Caporaso, Y.-J. Chen, M. L. Krogh, and M. Sanders, “Vacuum Insulator Studies for the Dielectric Wall Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS014, pp. 2358-2360.
[n] C. Antoine et al., “A New Fabrication and Stiffening Method of SRF Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP01D, pp. 1849-1851.
[n] C. Timossi and M. J. Chin, “The Use of FPGAs As A Platform for Distributed Control Systems”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_046.
[n] G. Ha and D. Sinha, “Start-to-end simulation study for transverse wiggler-based manipulation experiment”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 592-596. doi:10.18429/JACoW-NAPAC2025-TUP093
[n] H. Park, A. Hutton, F. Marhauser, S. U. De Silva, and J. R. Delayen, “Development of a Superconducting Twin Axis Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 932-935. doi:10.18429/JACoW-LINAC2016-THPLR037
[n] G. Ellis and B. G. Smith, “Modal Survey of Medium Energy Superconducting Radio Frequency Cavity for Accelerator Production of Tritium Project”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP027, pp. 258-262.
[n] P. Schuett, A. Skocic, and T. Weiland, “Computer Simulations of Inductive Output Tubes”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP30G, pp. 1233-1235.
[n] A. S. Plastun and A. Kolomiets, “Spatially Periodic RF Quadrupole LINAC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP090, pp. 634-636.
[n] S. A. Kheifets and S. A. Heifets, “Radiation of a Charge in a Perfectly Conducting Cylindrical Pipe with a Jump in its Cross Section”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-24, pp. 493-495.
[n] T. Atkinson, A. V. Bondarenko, A. N. Matveenko, and Y. Petenev, “Feasibility Study of Short Pulse Mode Operation for Multi-turn ERL Light Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB003, pp. 4-6.
[n] W. Kozanecki, M. A. Baak, J. Seeman, M. K. Sullivan, and U. Wienands, “Experimental Characterization of PEP-II Luminosity and Beam-beam Performance”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT051, pp. 665-667.
[n] T. I. Chen et al., “The Beam Lifetime Studies by Two Special Schemes”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP072L, pp. 1458-1462.
[n] C.-X. Wang, “Hamiltonian Analysis of Transverse Dynamics in Axisymmetric RF Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE016, pp. 1476-1478.
[n] T. Shibata, K. Fan, K. Hamano, K. Ishii, H. Matsumoto, and T. Sugimoto, “The New Eddy Current type Septum Magnets for Upgrading of Fast Extraction in Main Ring of J-PARC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1997-2000. doi:10.18429/JACoW-IPAC2019-TUPTS029
[n] H. Zha, A. Grudiev, and V. A. Dolgashev, “RF Design of the CLIC Structure Prototype Optimized for Manufacturing from Two Halves”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2147-2149. doi:10.18429/JACoW-IPAC2015-TUPTY054
[n] Y. Xie, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Development of a Quarter-wave Coaxial Coupler for 1.3 GHz Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2675-2677. doi:10.18429/JACoW-IPAC2014-WEPRI078
[n] N. Hosoda et al., “Construction of a Timing and Low-level RF System for XFEL/SPring-8”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE024, pp. 2191-2193.
[n] E. N. Zaplatin, I. V. Gonin, T. N. Khabiboulline, and V. P. Yakovlev, “SRF Low-Beta Elliptical Resonator Two-Ring Stiffening”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 929-931. doi:10.18429/JACoW-LINAC2016-THPLR036
[n] P. Emma et al., “Measurements of Transverse Emittance Growth due to Coherent Synchrotron Radiation in the SLAC SPPS Bunch Compressor Chicane”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB055, pp. 3129-3131.
[n] B. Sun, Z. Li, J. Y. Tang, and F. Yan, “Local Compensation-rematch for Major Element Failures in the C-ADS Accelerator”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP220, pp. 102-106.
[n] P. Junior, “The RFQ as a Neutron Source both for High Intensity and Micropulses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 517-520.
[n] M. Pekeler, S. Bauer, B. Griep, H. P. Vogel, and P. vom Stein, “Test Results of Superconducting Cavities Produced and Prepared Completely in Industry”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT040, pp. 635-637.
[n] V. S. Arbuzov et al., “172 MHZ RF SYSTEM FOR VEPP-2000 STORAGE RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUGP05, pp. 324-326.
[n] L. O. Dallin and W. A. Wurtz, “Production of Coherent Synchrotron Radiation at the Canadian Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA007, pp. 2484-2486.
[n] G. Reinhold, E. Freiberg, and R. Gleyvod, “60 kw Electron Accelerator for a Paint-Curing Facility”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1015-1018.
[n] U. R. Ristau, M. DiCastro, P. Duval, S. Fiedler, and A. Pazos, “The Concept of EMBL Beamline Control at Petra III”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOZ02, pp. 22-24.
[n] B. Yu. Bogdanovich, V. I. Kaminsky, V. A. Senyukov, and A. V. Nesterovich, “Small-Sized Electron Linear RF Accelerator with Beam Autoacceleration for Geology and Industry”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P115, pp. 3869-3871.
[n] G. M. Wang et al., “Implementation of a DC Bump at the Storage Ring Injection Straight Section”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP135, pp. 2378-2380.
[n] S. Assadi, F. Tecker, and M. J. Yang, “Optics Measurement of the Fermilab Main Injector 8-GeV Transfer Line”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP29, pp. 720-722.
[n] A. Krusche, H. Riege, and G. C. Schneider, “Automatic Procedures in the CPS Multiturn Shaving Ejection”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3340-3343.
[n] J. C. Yoon, J. W. Lee, J. Choi, and S. H. Nam, “EPICS Based Vacuum Control System Using Ethernet Multi Serial Device Severs for PAL Storage Ring”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP568, pp. XX-XX.
[n] P. F. Meads Jr, “Fitting Measured Emittance Data”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1593-1595.
[n] M. Kasa and A. Zholents, “Pulsed Wire Measurements of a High Field Gradient Quadrupole Wiggler”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1257-1259. doi:10.18429/JACoW-IPAC2018-TUPMF006
[n] D. Proch, “Impact of CARE-SRF on FLASH/XFEL and Other Projects”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOCAU02, pp. 46-50.
[n] J. Iversen, P. D. Gall, D. Reschke, W. Singer, and J. Tiessen, “Single Cell Cavity Program for the XFEL”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP27, pp. 524-524.
[n] Y. Shimosaki et al., “Lattice Design of a Very Low-emittance Storage Ring for SPring-8-II”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUOAB01, pp. 942-944.
[n] R. A. Kostin et al., “Superconducting Travelling Wave Accelerating Structure Development”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB011, pp. 1085-1087.
[n] G. Spalek, A. Klapetzky, and J. Rose, “Azimuthal Stabilization of the Radio-Frequency Quadruploe with Loop-Coupled TEM Lines”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO409, pp. 63-66.
[n] O. Despe and J. Wang, “A Gate Drive Circuit for Gate-Turn-Off (GTO) Devices in Series Stack”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA165, pp. 3773-3775.
[n] L. E. Boon, J. A. Crittenden, T. Ishibashi, and K. C. Harkay, “Application of the SYNRAD3D Photon-Tracking Model to Shielded Pickup Measurements of Electron Cloud Buildup at CesrTA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC141, pp. 2319-2321.
[n] M. A. Allen, H. D. Schwarz, and P. B. Wilson, “Damping Ring rf for SLC”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3447-3450.
[n] S. D. Chen, C.-S. Hwang, and T. M. Uen, “Spectrum Property Analysis of a Wiggler-like Undulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD040, pp. 3177-3179.
[n] H. Euteneuer, H. Herminghaus, and H. Sch?Âler, “Simple Countermeasures Against the TM110-Beam-Blowup-Mode in Biperiodic Structures”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0025, pp. 394-396.
[n] M. Lee et al., “Lattice Commissioning Strategy for the B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P093, pp. 2586-2588.
[n] C. Gabor, H. Klein, O. Meusel, J. Pozimski, and U. Ratzinger, “Experimental Results of a Non-Destructive Emittance Measurement Device for H- Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT001, pp. 782-784.
[n] R. W. Garnett et al., “A Compact Muon Accelerator for Tomography and Active Interrogation”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 861-863. doi:10.18429/JACoW-LINAC2016-THPLR009
[n] I. G. Gonin, J. F. DeFord, B. Held, and N. Solyak, “Multipactor Simulations in Superconducting Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN093, pp. 2248-2250.
[n] Z. Fang et al., “Low Level RF Systems for J-PARC Linac 50-mA Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2889-2891. doi:10.18429/JACoW-IPAC2015-WEPMA052
[n] T. E. Oseroff, M. Liepe, B. Moeckly, M. J. Sowa, and Z. Sun, “RF Characterization of Novel Superconducting Materials and Multilayers”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 950-955. doi:10.18429/JACoW-SRF2019-THP044
[n] O. P. Korovin, V. O. Naidenov, and E. O. Popov, “Some Interaction Peculiarities of Relativistic Particles with UHF Electric Field of High Intensity at Large Distances”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V009, pp. 1511-1513.
[n] S. Kahn, M. A. Cummings, A. Dudas, R. Johnson, M. Neubauer, and M. Popovic, “Magnet system for a 1.497 GHz injection-locked magnetron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3608-3610. doi:10.18429/JACoW-IPAC2023-WEPM019
[n] A. V. Tyukhtin, “Use of a Grid Waveguide for Particle Energy Determination”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC122, pp. 1302-1304.
[n] V. Batalin, T. V. Kulevoy, S. V. Petrenko, and Yr. N. Volkov, “Producing of the High Charged Ions by the Modifcation of MEVVA Ion Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1453-1456.
[n] R. W. Harrison and D. E. Lobb, “A Negative Pion Beam Transport Channel for Radiobiology and Radiation Therapy at TRIUMF”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1029-1032.
[n] U. van Rienen and T. Weiland, “Impedance of Cavities with Beam Ports Above Cut-Off”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-17, pp. 289-291.
[n] C. Wilsen, M. F. Kirshner, and R. D. Kowalczyk, “Gridless IOT for Accelerator Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS093, pp. 2556-2558.
[n] F. Schlander, S. Aderhold, D. Reschke, and K. Twarowski, “Analysis of Recent Results from Second Sound, Temperature Mapping and Optical Inspection of 1.3 GHz Cavities at DESY”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO066, pp. 558-560.
[n] S. M. Hartman, “Failure Mode Effects Analysis for an Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP052, pp. 206-208.
[n] B. Faatz et al., “FLASH II: a Seeded Future at FLASH”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE005, pp. 2152-2154.
[n] J. D. Schneider, “Overview of High-power CW Proton Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF203, pp. 118-122.
[n] R. E. Worsham, “Preliminary Design of the R-F System for ORIC”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59C04, pp. 150-158.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Ferdinand, “Room Temperature Structure Development for High-Current Applications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THXKI02, pp. 2564-2568.
- M. P. Pretelli, F. Burini, G. T. Taddia, S. M. Tenconi, A. Lampasi, and P. Zito, “Switching Network Units for High Currents and Voltages or Plasma Applications”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 603-605.
- R. J. Dejus, “On the Issue of Phasing of Undulators at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE001, pp. 764-766.
- J. E. Spencer and B. Zotter, “Optics Effects & Optinons for TeV Colliders - II”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 481-484.
- J. L. Revol and E. Plouviez, “Diagnostics and Equipments for Single Bunch Operation at ESRF”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1506-1509.
- A. Kondakov, S. A. Krutikhin, M. Kondaurov, S. V. Motygin, and A. M. Pilan, “RF STATION FOR ION BEAM STAKING IN HIRFL-CSR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUGO04, pp. XX-XX.
- P. Fehsenfeld et al., “Be-7 Beams for Wear Studies of Plastics, Elastomers and Ceramics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2664-2667.
- R. Bartolini and T. Pulampong, “Ultra-low Emittance Upgrade Options for Third Generation Light Sources”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA067, pp. 237-239.
- V. A. Polyakov and I. S. Shchedrin, “Electron Beam Guns for High Intensity Linear Accelerators and Technological Purposes”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1489-1492.
- Y. Xie, M. Liepe, D. Meidlinger, and H. Padamsee, “Thermal Modeling of Ring-Type Defects”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO048, pp. 331-333.
- F. D. Dziuba, M. Busch, H. Klein, H. Podlech, U. Ratzinger, and C. Zhang, “Development of Superconducting CH-Cavities for the EUROTRANS Injector Linac”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO017, pp. 578-581.
- K. G. Sonnad and J. R. Cary, “Halo Mitigation Using Nonlinear Lattices”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPB008, pp. 620-624.
- C. G. Whyte and J. C. Nugent, “RECENT RESULTS FROM MICE ON MULTIPLE COULOMB SCATTERING AND ENERGY LOSS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 598-600.
- J. T. Maniscalco, M. Liepe, and R. D. Porter, “Design Updates on Cavity to Measure Suppression of Microwave Surface Resistance by DC Magnetic Fields”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 754-758.
- B. Littmann and H. Henke, “Feasibility Study of Optically Coupling RF-Power at mm Waves”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ30, pp. 1593-1595.
- R. Panas, A. M. Marendziak, A. I. Wawrzyniak, and M. Wisniowski, “Studies of The Electron Beam Lifetime in Solaris Electron Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1541-1543.
- A. Chao, “Summary Beam-beam Session, eeFACT2016 Workshop”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 203-205.
- S. H. Mirza, P. Forck, H. Klingbeil, and R. Singh, “Effect of Model Errors on the Closed Orbit Correction at the SIS18 Synchrotron of GSI”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2080-2083.
- A. S. Kesar, M. Hess, S. E. Korbly, and R. J. Temkin, “Smith-Purcell Radiation from a Charge Moving Above a Finite-Length Grating”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE016, pp. 1496-1498.
- K. Yonehara et al., “The MANX Muon Cooling Demonstration Experiment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN110, pp. 2969-2971.
- M. Hu, “Fermilab Recycler Diagnostics”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH066, pp. 1363-1365.
- T. Nakamura, K. Furukawa, T. T. Nakamura, and J.-I. Odagiri, “Upgrading the Control System of the Movable Masks for KEKB”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP074, pp. 546-548.
- K. Beckert et al., “Charge Exchange Extraction at the Experimental Storage Ring ESR at GSI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP06A, pp. 559-564.
- F. Gerigk, “LINAC4, A NEW H- LINEAR INJECTOR AT CERN”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUCI01, pp. XX-XX.
- R. Appleby, J. R. J. Bennett, T. A. Broome, C. Densham, and H. Vincke, “The Charged Beam Dumps for the International Linear Collider”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS079, pp. 736-737.
- F. Schlander, K. Aulenbacher, R. G. Heine, D. Simon, and T. Stengler, “1.3 GHz SRF Cryomodules for the Mainz Energy-recovering Superconducting Accelerator MESA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2853-2855.
- A. Garren and M. Sullivan, “Apiary B-Factroy Separation Scheme”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2844-2847.
- C. Gonzalez-Ortiz and R. Ainsworth, “Single-bunch instabilities at the Fermilab Recycler Ring”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 676-680.
- W. Bartmann, J. L. Abelleira, F. Burkart, B. Goddard, J. Jentzsch, and R. Ostojic, “Sources of Emittance Growth at the CERN PS Booster to PS Transfer”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1352-1355.
- P. W. Schmor, “New Achievements At Triumf And Future Plans”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 93-98.
- H. Suk, D. Jang, M. Kim, and S. Oh, “A Gas-filled Capillary Plasma Source for Laser-driven Plasma Acceleration”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC009, pp. 4071-4073.
- S. Verd??-Andr?®s, R. Calaga, E. Cano-Pleite, R. Leuxe, and J. A. Mitchell, “Design of LHC Crab Cavities Based on DQW Cryomodule Test Experience”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 925-928.
- K. Nakanishi, K. Hara, K. Hosoyama, A. Kabe, and Y. Kojima, “Measurement of Hydrogen Absorbed in Niobium”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC021, pp. 2935-2937.
- R. W. Fast and M. A. Otavka, “Liquid Deuterium Neutron Attenuator for Broad-Band Photon Beam Facility”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1201-1204.
- S. Papadopoulou, F. Antoniou, J. E. Muller, Y. Papaphilippou, and G. Trad, “Modelling and Measurements of Bunch Profiles at the LHC Flat Bottom”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1477-1480.
- F. Chastel, P. Pluvy, and H. Rocipon, “Challenges of the XFEL Cryomodule Integration and Industry Transfer”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1929-1932.
- O. Gr, “The LHC Vacuum System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8C001, pp. 3542-3546.
- J. Mondal, G. Ciovati, P. Kneisel, K. C. Mittal, and R. Myneni, “Characterization of Ingot Material for SRF Cavity Production”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THOAAU01, pp. 455-461.
- E. Wang et al., “Beam Dynamics of Funneling Multiple Bunches Electrons”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM08, pp. 646-648.
- H. K. Kuhn and A. Hilaire, “The CERN SPS Low Beta Insertion Control System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2293-2296.
- L. Emery, M. Borland, and H. Shang, “Use of a General-Purpose Optimization Module in Accelerator Control”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE002, pp. 2330-2332.
- N. Cook, C. Phillips, D. Abell, M. Henderson, and P. Piot, “Fast and efficient modeling of structure-based wakefield accelerators”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper WEP036, unpublished.
- M. V. Alekseev et al., “Niobium Semiproducts for the Superconducting Strands and SRF Cavities in Russia”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 857-859.
- F.-J. Decker et al., “Emittance Control for Different FACET Beam Setups in the SLAC Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPLB01, pp. 138-140.
- D. Raparia, “RFQ Acceleration Section and Its Optimization”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-10, pp. 61-63.
- N. Chaisueb, S. Rimjaem, J. Saisut, and N. Kangrang, “Characterization and Simulations of Electron Beams Produced From Linac-Based Intense THz Radiation Source”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 131-134.
- T. Saeki et al., “Study on Electro-Polishing Process by Niobium-Plate Sample With Artificial Pits”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO037, pp. 461-463.
- D. V. Neuffer, T. A. Mohayai, P. Snopok, and D. J. Summers, “Wedge Absorbers for Final Cooling for a High-Energy High-Luminosity Lepton Collider”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3832-3834.
- J. Rose et al., “A SCRF Linac as a FEL Driver and Storage Ring Injector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB036, pp. 2808-2810.
- J. D. Fuerst, “The ATLAS Energy Upgrade Cryomodule”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper MOOCAU04, pp. 52-56.
- T. J. Shea et al., “Beam Instrumentation for the RHIC Sextant Test”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1521-1524.
- P. Maccioni and J. L. Boutes, “Superconducting Cavities Manufacturing at CERCA”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D31, pp. 1090-1093.
- L. Van Loyen, D. Elefant, V. Palmieri, W. Venturini, and J. Halbritter, “Topography and Electrical Properties of Sputtered Niobium Films”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D35, pp. 1119-1124.
- S. A. Borsuk, “TUNING THE CELLS OF THE ACCELERATING STRUCTURE WITH RF-QUADRUPOLE DOUBLETS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUGP02, pp. XX-XX.
- T. Tran Ngoc and J.-P. Labrie, “Boiling Heat Transfer Process in the Design of High Power Linac Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-19, pp. 90-92.
- R. L. Warnock, “Revised View of Basic FEL Equations and a Nonlinear Vlasov Description”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA20, pp. 222-224.
- G. X. Xia, B. C. Jiang, and L. G. Liu, “Simulation of the Fast Ion Instability in SSRF Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD030, pp. 1991-1993.
- J. C. Dooling, L. I. Donley, G. E. McMichael, and V. F. Stipp, “Diagnostic and Numerical Studies of The IPNS Linac with A Recently Installed Buncher Amplifier”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU452, pp. 437-439.
- D. Trbojevic, A. J. Stevens, M. A. Harrison, F. Dell, and S. Peggs, “A Study of Betatron and Momentum Collimators in RHIC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P005, pp. 219-221.
- J. Alessi et al., “The New AGS H- RFQ Preinjector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 538-541.
- C. Bonavolont?á, V. Palmieri, V. Rampazzo, and M. Valentino, “Magnetic Field Sensors Applied to Electropolishing of Superconducting RF Tesla-Type Cavity”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA14, pp. 210-214.
- V. V. Zaitsev, “Obtaining af ArF Ions in Non-equilibrium Ion-molecular Energy-tense Systems”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1441-1444.
- A. Gonzalez, T. Maruta, P. Ostroumov, A. Plastun, K. Fukushima, and J. Wan, “Transverse beam dynamics studies in the FRIB accelerating cryomodules”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 618-621.
- A. W. Cross, W. He, A. Phelps, K. Ronald, and H. Yin, “Pseudospark-sourced Beams of Electrons and Ions”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS089, pp. 1711-1713.
- T. Miura et al., “Low Level RF System for cERL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA048, pp. 1440-1442.
- Y. P. Vakhrushin et al., “The Present State of Activities on Development of the Superconducting RF-Structures for Electron Accelerators”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E01, pp. XX-XX.
- H. Hanaki, A. Asami, S. Ohsawa, and T. Takahashi, “Computer Design of Coupler Cavities for a Travelling-Wave-Type Buncher”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 910-913.
- M. Seidel, C. Adolphsen, R. Assmann, and D. H. Whittum, “Detection of Beam Induced Dipole-Mode Signals in the SLC S-Band Structures”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P086, pp. 2119-2121.
- F. Naito, M. Ikegami, T. Ito, T. Kato, E. Takasaki, and H. Tanaka, “Tuning of the RF Field of the DTL for the J-PARC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB049, pp. 2835-2837.
- S. De Silva, “Crabbing cavity system development for International Linear Collider”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 546-550.
- M. E. Price and R. Yamada, “Short Sample Test of Superconducting Wire”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1190-1194.
- A. Lunin, I. G. Gonin, N. Solyak, and V. P. Yakovlev, “Final Results on RF and Wake Kicks Caused by the Couplers for the ILC Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE034, pp. 3431-3433.
- P. Chitnis and K. A. Brown, “Nonlinear System Identification of Superconducting Magnets of RHIC at BNL”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 90-93.
- D. P. McGinnis, “FNAL Tevatron Operational Status”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOAA005, pp. 484-488.
- X. Sun, G. Decker, and N. Sereno, “Simulation Studies of Button Pickup Electrode Response to Longitudinally Tilted Beams”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG013, pp. 53-55.
- S.-W. Kim, “Quench Simulation Program for Superconducting Accelerator Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH096, pp. 3457-3459.
- Y. Y. Lau and D. G. Colombant, “Efficiency and Frequency Stability in a High Power Microwave Gap”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 637-640.
- J. Pivar and S. Hlava, “Bratislave Multipurpose Neutron Source”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 401-404.
- K. Saito, F. Furuta, and H. Umezawa, “Multi-wire Slicing of Large Grain Ingot Material”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THOAAU05, pp. 467-472.
- G. Rumolo, J. B. Jeanneret, and D. Schulte, “Vacuum Specifications for the CLIC Main Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE024, pp. 3401-3403.
- G. Olry and B. Leluan, “Precise 3D Geometric Control of 700MHz SC Elliptical Cavities: RF Measurements vs. Theoretical Simulations”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR024, pp. XX-XX.
- J. G. Cogan, R. Bartoldus, D. W. Miller, and E. Strauss, “ATLAS Online Determination and Feedback of LHC Beam Parameters”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHAULT02, pp. 1306-1309.
- E. Syresin, N. A. Morozov, and D. Shvidkiy, “Comparisons and Simulations of Superconducting Dipole Magnets for JINR Carbon Ion Gantry”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2174-2176.
- W. Stein, “RIA Fragmentation Line Beam Dump”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB055, pp. 2847-2848.
- A. R. Rossi, A. Bacci, C. Maroli, V. Petrillo, and L. Serafini, “Study of the Beam Dynamics in a Linac with the Code RETAR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN032, pp. 3298-3300.
- I. S. K. Gardner, “A Review of Spallation Neutron Source Accelerators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUX03B, pp. 98-102.
- B. Han and M. P. Stockli, “The New LEBT for the Spallation Neutron Source Power Upgrade Project”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS075, pp. 1823-1825.
- J. R. Harris, D. T. Blackfield, G. J. Caporaso, Y.-J. Chen, M. L. Krogh, and M. Sanders, “Vacuum Insulator Studies for the Dielectric Wall Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS014, pp. 2358-2360.
- C. Antoine et al., “A New Fabrication and Stiffening Method of SRF Cavities”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP01D, pp. 1849-1851.
- C. Timossi and M. J. Chin, “The Use of FPGAs As A Platform for Distributed Control Systems”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_046.
- G. Ha and D. Sinha, “Start-to-end simulation study for transverse wiggler-based manipulation experiment”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 592-596.
- H. Park, A. Hutton, F. Marhauser, S. U. De Silva, and J. R. Delayen, “Development of a Superconducting Twin Axis Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 932-935.
- G. Ellis and B. G. Smith, “Modal Survey of Medium Energy Superconducting Radio Frequency Cavity for Accelerator Production of Tritium Project”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP027, pp. 258-262.
- P. Schuett, A. Skocic, and T. Weiland, “Computer Simulations of Inductive Output Tubes”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP30G, pp. 1233-1235.
- A. S. Plastun and A. Kolomiets, “Spatially Periodic RF Quadrupole LINAC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP090, pp. 634-636.
- S. A. Kheifets and S. A. Heifets, “Radiation of a Charge in a Perfectly Conducting Cylindrical Pipe with a Jump in its Cross Section”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-24, pp. 493-495.
- T. Atkinson, A. V. Bondarenko, A. N. Matveenko, and Y. Petenev, “Feasibility Study of Short Pulse Mode Operation for Multi-turn ERL Light Source”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB003, pp. 4-6.
- W. Kozanecki, M. A. Baak, J. Seeman, M. K. Sullivan, and U. Wienands, “Experimental Characterization of PEP-II Luminosity and Beam-beam Performance”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT051, pp. 665-667.
- T. I. Chen et al., “The Beam Lifetime Studies by Two Special Schemes”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP072L, pp. 1458-1462.
- C.-X. Wang, “Hamiltonian Analysis of Transverse Dynamics in Axisymmetric RF Photoinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE016, pp. 1476-1478.
- T. Shibata, K. Fan, K. Hamano, K. Ishii, H. Matsumoto, and T. Sugimoto, “The New Eddy Current type Septum Magnets for Upgrading of Fast Extraction in Main Ring of J-PARC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1997-2000.
- H. Zha, A. Grudiev, and V. A. Dolgashev, “RF Design of the CLIC Structure Prototype Optimized for Manufacturing from Two Halves”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2147-2149.
- Y. Xie, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Development of a Quarter-wave Coaxial Coupler for 1.3 GHz Superconducting Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2675-2677.
- N. Hosoda et al., “Construction of a Timing and Low-level RF System for XFEL/SPring-8”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE024, pp. 2191-2193.
- E. N. Zaplatin, I. V. Gonin, T. N. Khabiboulline, and V. P. Yakovlev, “SRF Low-Beta Elliptical Resonator Two-Ring Stiffening”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 929-931.
- P. Emma et al., “Measurements of Transverse Emittance Growth due to Coherent Synchrotron Radiation in the SLAC SPPS Bunch Compressor Chicane”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB055, pp. 3129-3131.
- B. Sun, Z. Li, J. Y. Tang, and F. Yan, “Local Compensation-rematch for Major Element Failures in the C-ADS Accelerator”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP220, pp. 102-106.
- P. Junior, “The RFQ as a Neutron Source both for High Intensity and Micropulses”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 517-520.
- M. Pekeler, S. Bauer, B. Griep, H. P. Vogel, and P. vom Stein, “Test Results of Superconducting Cavities Produced and Prepared Completely in Industry”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT040, pp. 635-637.
- V. S. Arbuzov et al., “172 MHZ RF SYSTEM FOR VEPP-2000 STORAGE RING”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUGP05, pp. 324-326.
- L. O. Dallin and W. A. Wurtz, “Production of Coherent Synchrotron Radiation at the Canadian Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA007, pp. 2484-2486.
- G. Reinhold, E. Freiberg, and R. Gleyvod, “60 kw Electron Accelerator for a Paint-Curing Facility”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1015-1018.
- U. R. Ristau, M. DiCastro, P. Duval, S. Fiedler, and A. Pazos, “The Concept of EMBL Beamline Control at Petra III”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOZ02, pp. 22-24.
- B. Yu. Bogdanovich, V. I. Kaminsky, V. A. Senyukov, and A. V. Nesterovich, “Small-Sized Electron Linear RF Accelerator with Beam Autoacceleration for Geology and Industry”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P115, pp. 3869-3871.
- G. M. Wang et al., “Implementation of a DC Bump at the Storage Ring Injection Straight Section”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP135, pp. 2378-2380.
- S. Assadi, F. Tecker, and M. J. Yang, “Optics Measurement of the Fermilab Main Injector 8-GeV Transfer Line”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP29, pp. 720-722.
- A. Krusche, H. Riege, and G. C. Schneider, “Automatic Procedures in the CPS Multiturn Shaving Ejection”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3340-3343.
- J. C. Yoon, J. W. Lee, J. Choi, and S. H. Nam, “EPICS Based Vacuum Control System Using Ethernet Multi Serial Device Severs for PAL Storage Ring”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP568, pp. XX-XX.
- P. F. Meads Jr, “Fitting Measured Emittance Data”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1593-1595.
- M. Kasa and A. Zholents, “Pulsed Wire Measurements of a High Field Gradient Quadrupole Wiggler”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1257-1259.
- D. Proch, “Impact of CARE-SRF on FLASH/XFEL and Other Projects”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper MOOCAU02, pp. 46-50.
- J. Iversen, P. D. Gall, D. Reschke, W. Singer, and J. Tiessen, “Single Cell Cavity Program for the XFEL”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP27, pp. 524-524.
- Y. Shimosaki et al., “Lattice Design of a Very Low-emittance Storage Ring for SPring-8-II”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUOAB01, pp. 942-944.
- R. A. Kostin et al., “Superconducting Travelling Wave Accelerating Structure Development”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB011, pp. 1085-1087.
- G. Spalek, A. Klapetzky, and J. Rose, “Azimuthal Stabilization of the Radio-Frequency Quadruploe with Loop-Coupled TEM Lines”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO409, pp. 63-66.
- O. Despe and J. Wang, “A Gate Drive Circuit for Gate-Turn-Off (GTO) Devices in Series Stack”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA165, pp. 3773-3775.
- L. E. Boon, J. A. Crittenden, T. Ishibashi, and K. C. Harkay, “Application of the SYNRAD3D Photon-Tracking Model to Shielded Pickup Measurements of Electron Cloud Buildup at CesrTA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC141, pp. 2319-2321.
- M. A. Allen, H. D. Schwarz, and P. B. Wilson, “Damping Ring rf for SLC”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3447-3450.
- S. D. Chen, C.-S. Hwang, and T. M. Uen, “Spectrum Property Analysis of a Wiggler-like Undulator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD040, pp. 3177-3179.
- H. Euteneuer, H. Herminghaus, and H. Sch?Âler, “Simple Countermeasures Against the TM110-Beam-Blowup-Mode in Biperiodic Structures”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0025, pp. 394-396.
- M. Lee et al., “Lattice Commissioning Strategy for the B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P093, pp. 2586-2588.
- C. Gabor, H. Klein, O. Meusel, J. Pozimski, and U. Ratzinger, “Experimental Results of a Non-Destructive Emittance Measurement Device for H- Beams”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT001, pp. 782-784.
- R. W. Garnett et al., “A Compact Muon Accelerator for Tomography and Active Interrogation”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 861-863.
- I. G. Gonin, J. F. DeFord, B. Held, and N. Solyak, “Multipactor Simulations in Superconducting Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN093, pp. 2248-2250.
- Z. Fang et al., “Low Level RF Systems for J-PARC Linac 50-mA Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2889-2891.
- T. E. Oseroff, M. Liepe, B. Moeckly, M. J. Sowa, and Z. Sun, “RF Characterization of Novel Superconducting Materials and Multilayers”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 950-955.
- O. P. Korovin, V. O. Naidenov, and E. O. Popov, “Some Interaction Peculiarities of Relativistic Particles with UHF Electric Field of High Intensity at Large Distances”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V009, pp. 1511-1513.
- S. Kahn, M. A. Cummings, A. Dudas, R. Johnson, M. Neubauer, and M. Popovic, “Magnet system for a 1.497 GHz injection-locked magnetron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM019, pp. 3608-3610.
- A. V. Tyukhtin, “Use of a Grid Waveguide for Particle Energy Determination”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC122, pp. 1302-1304.
- V. Batalin, T. V. Kulevoy, S. V. Petrenko, and Yr. N. Volkov, “Producing of the High Charged Ions by the Modifcation of MEVVA Ion Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1453-1456.
- R. W. Harrison and D. E. Lobb, “A Negative Pion Beam Transport Channel for Radiobiology and Radiation Therapy at TRIUMF”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1029-1032.
- U. van Rienen and T. Weiland, “Impedance of Cavities with Beam Ports Above Cut-Off”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-17, pp. 289-291.
- C. Wilsen, M. F. Kirshner, and R. D. Kowalczyk, “Gridless IOT for Accelerator Applications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS093, pp. 2556-2558.
- F. Schlander, S. Aderhold, D. Reschke, and K. Twarowski, “Analysis of Recent Results from Second Sound, Temperature Mapping and Optical Inspection of 1.3 GHz Cavities at DESY”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO066, pp. 558-560.
- S. M. Hartman, “Failure Mode Effects Analysis for an Accelerator Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP052, pp. 206-208.
- B. Faatz et al., “FLASH II: a Seeded Future at FLASH”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE005, pp. 2152-2154.
- J. D. Schneider, “Overview of High-power CW Proton Accelerators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THXF203, pp. 118-122.
- R. E. Worsham, “Preliminary Design of the R-F System for ORIC”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59C04, pp. 150-158.
Back to search