Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Facco et al., “Beam Dynamics Simulations of SARAF Accelerator including Error Propagation and Implications for the EURISOL Driver”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP074, pp. 426-428.
[n] G. Kube, J. Neugebauer, and F. Schmidt-F?Âhre, “BPM Resolution Studies at PETRA III”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 517-521. doi:10.18429/JACoW-IBIC2019-WEPP005
[n] A. V. Otboyev and E. A. Perevedentsev, “On Self-Consistent -Functions of Colliding Bunches”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP22, pp. 1524-1526.
[n] R. C. Webber et al., “FNAL HINS Beam Measurements and the Future of High Intensity Linac Instrumentation”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP001, pp. 755-757.
[n] M. Mayerhofer et al., “Laser powder bed fusion for x-band RF cavities: A preliminary study”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2616-2619. doi:10.18429/JACoW-IPAC2025-THPB052
[n] W. Qin and I. Zagorodnov, “General method of short-range wakefield calculation for corrugated structures of arbitrary shape”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3405-3408. doi:10.18429/JACoW-IPAC2023-WEPL125
[n] D. Dewitt and O. Boine-Frankenheim, “Beamline optimization for Laser-Accelerated Ions”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3009, unpublished.
[n] M. Yamanaka et al., “Pressure Test for Large Grain and Fine Grain Niobium Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1173-1174. doi:10.18429/JACoW-IPAC2021-MOPAB383
[n] J. Peters, “The HERA RF-Driven Multicusp H- Ion Source”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP061, pp. 388-390.
[n] V. Dompè, G. Latini, M. Ferrario, and S. Pioli, “The EuAPS betatron radiation source control system”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 919-924. doi:10.18429/JACoW-ICALEPCS2025-WEMG004
[n] S. Sato et al., “Installation of Beam Monitor Sensors in the LINAC Section of J-PARC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH061, pp. 1151-1153.
[n] D. Longuevergne et al., “Tests of Wire Sublimations Very Close to SPIRAL 2 Superconducting Cavity”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP005, pp. 783-785.
[n] C. M. Garcia Jaimes et al., “Parameter space for the magnetic design of Nested Magnets in the FCC-ee arc cell”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2481-2484. doi:10.18429/JACoW-IPAC2024-WEPR11
[n] S. S. Kurennoy, “A Method to Design Multi-Cell Accelerator Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4610-4612. doi:10.18429/JACoW-IPAC2017-THPVA071
[n] J. Karmakar, S. Ghosh, S. Patel, and B. Sahu, “Beam optics simulations of achromatic section of Delhi Light Source”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2024-2027. doi:10.18429/JACoW-IPAC2025-WEPM030
[n] L. Faillace et al., “Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2976-2979. doi:10.18429/JACoW-IPAC2023-WEPA134
[n] A. I. Papash, E. Br?â, and A.-S. Mueller, “An Optimized Lattice for a Very Large Acceptance Compact Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1402-1405. doi:10.18429/JACoW-IPAC2017-TUPAB037
[n] S. Ahmadiannamin, J. Rahighi, Kh. S. Sarhadi, F. Abbasi, and M. Lamehi Rashti, “Design and Construction of 126 MHz Capacity Loaded Aluminium Cavity Prototype”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4653-4656. doi:10.18429/JACoW-IPAC2017-THPVA085
[n] P. Komarov, S. Mitrofanov, A. Nikiforov, and V. Schegolev, “Modernization of the automated radiation monitoring system for the U400M cyclotron and the main building at FLNR”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3213-3215. doi:10.18429/JACoW-IPAC2025-THPS124
[n] M. J. Boland, D. Bertwistle, F. Le Pimpec, and X. F. D. Stragier, “Status and Plans for the New CLS Electron Source Lab”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2614-2616. doi:10.18429/JACoW-IPAC2022-THPOPT020
[n] T.-J. Kuo et al., “Design of prototype magnet for FETS-FFA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 464-466. doi:10.18429/JACoW-IPAC2024-MOPR05
[n] S. Kamada et al., “Conceptual Design of a Compact Electron Storage Ring System Dedicated to Coronary Angiography”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1468-1471.
[n] L. Catani et al., “Nb coating of copper cavities by UHV cathodic arc”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP70, pp. XX-XX.
[n] L. Antoniazzi, E. Fagotti, L. Ferrari, A. Palmieri, and A. Pisent, “Construction, assembly and measurements of the SPES RFQ”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2027-2029. doi:10.18429/JACoW-IPAC2023-TUPL128
[n] C. Lopez Osses et al., “AI-ready control infrastructure for cyclotron systems using GPU-accelerated Python GUIs and LabVIEW over ZeroMQ”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 42-45. doi:10.18429/JACoW-NAPAC2025-MOP003
[n] W. Gu, H. Zha, J. Shi, and H. Chen, “Using octupoles to create uniform electron beam produced by irradiation accelerators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3653-3655. doi:10.18429/JACoW-IPAC2024-THPR59
[n] A. Chakrabarti et al., “Heavy Ion Radio-Frequency Quadrupole LINAC for VEC-RIB Facility”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP034, pp. 142-144.
[n] M. Ikegami, F. Naito, J. Qiang, and Y. Kondo, “Simulation Study of the RF Chopper”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP070, pp. 911-913.
[n] X. Yang, J. B. Murphy, H. J. Qian, S. Seletskiy, Y. Shen, and X. J. Wang, “Experimental Characterization and Optimization of High-brightness Electron Beam at the NSLS SDL”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP053, pp. 521-523.
[n] T. G. Lucas et al., “An Overview of the Radio-Frequency System for an Inverse Compton X-Ray Source Based on CLIC Technology”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2759-2761. doi:10.18429/JACoW-IPAC2021-WEPAB073
[n] W. Blokland, Y. Liu, B. W. Riemer, M. Wendel, and D. E. Winder, “Strain and Temperature Measurements From the SNS Mercury Target Vessel During High Intensity Beam Pulses”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1230-1233. doi:10.18429/JACoW-IPAC2017-TUOBA3
[n] W. Chou and T. Barts, “Impedance of a Perforated Liner and Its Impact on the SSC Collider”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3444-3447.
[n] Y. Kamiya, K. Shinoe, T. Koseki, H. Ohkuma, H. Kudo, and H. Takaki, “Measurement of the Orbit Parameters at SOR-RING”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1509-1512.
[n] M. Kuntzsch, A. Buechner, T. Kirschke, U. Lehnert, and F. Roeser, “Future Timing and Synchronization Scheme at ELBE”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD31, pp. 116-118.
[n] Y.-K. Kan and J. Qiang, “Validation of the slice model in beam-beam simulations”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3217-3220. doi:10.18429/JACoW-IPAC2024-THPC78
[n] M. Dubouchet, A. Homs Puron, L. Claustre, S. Debionne, and V. Rey Bakaikoa, “ESRF's software strategy for high-throughput detectors: scalable data acquisition with real-time processing”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1340-1346. doi:10.18429/JACoW-ICALEPCS2025-THBG001
[n] C.-M. Alvinerie, C. Taylor, and E.-C. Huang, “LANSCE beam transport model enhancement and validation”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 493-496. doi:10.18429/JACoW-NAPAC2025-TUP057
[n] S. Sampayan et al., “Development of a Compact Radiography Accelerator Using Dielectric Wall Accelerator Technology”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB010, pp. 716-718.
[n] S. Krave, V. Marinozzi, and R. Jayathilaka, “Tool chain for simulations of bi-filar coil winding for fast quench protection”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOP017, unpublished.
[n] G. Hallilingaiah, “Preliminary results of electromagnetic simulation for optimizing an SRF gun cavity to maximize the beam brightness”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB033, unpublished.
[n] S. Matsumoto et al., “Characteristics of Different Materials on High-Gradient Experiments”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP055, pp. 912-914.
[n] V. P. Derenchuk et al., “A Pulsed Ion Source for the IUCF Cooler Injector Synchroton”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W016, pp. 2737-2739.
[n] S. M. Pruss, C. Crawford, D. Finley, and M. Harrison, “Operational Experience with Using Collimators to Remove Halo in the Tevatron Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 439-441.
[n] S. Bielawski, M.-E. Couprie, M. Hosaka, M. Katoh, A. Mochihashi, and C. Szwaj, “Influence of Optical Feedback on the Coherence Properties of FEL Oscillators”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THAAU04, pp. XX-XX.
[n] V. Baggiolini, D. Garcia Quintas, J. Wenninger, and J. P. Wozniak, “Software Interlocks System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB03, pp. 403-405.
[n] P. Putek, G. Hallilingaiah, M. Wenskat, S. Adrian, and U. van Rienen, “Multi-physics simulation of quadrupole resonators in the time domain under uncertainties”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3063-3066. doi:10.18429/JACoW-IPAC2023-WEPA182
[n] A. Halavanau and R. Robles, “Optimization of the optical design of cavity-based x-ray lasers”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL067, unpublished.
[n] T. Lofnes and V. Ziemann, “Fast Cooling Time Measurements in CELSIUS using a Third Generation Mobile Phone Signal Processing Device”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE116, pp. 1927-1929.
[n] U. Dorda and A. Fabich, “Implementation update of MYRRHA phase 1 (Minerva)”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4014, unpublished.
[n] E. I. Simakov et al., “Possibilities for Fabricating Polymer Dielectric Laser Accelerator Structures with Additive Manufacturing”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4671-4674. doi:10.18429/JACoW-IPAC2018-THPML011
[n] S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Development of a Beam Induced Fluorescence Monitor for Non-Destructively Profiling MW Proton Beam at the J-PARC Neutrino Beamline”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 358-362. doi:10.18429/JACoW-IBIC2019-TUPP024
[n] M. P. Stockli et al., “Ramping Up the SNS Beam Current with the LBNL Baseline H- Source”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP119, pp. 682-684.
[n] C.-F. Chang and C. Liu, “Detector protection system used in the Taiwan Photon Source 13A experimental station”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3043-3045. doi:10.18429/JACoW-IPAC2025-THPS035
[n] M. Schwarz, S. Glukhov, A.-S. Mueller, and J. Schaefer, “Impact of the cSTART impedance on beam dynamics”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2160-2163. doi:10.18429/JACoW-IPAC2025-WEPM080
[n] F. Ames, “Charge State Boosters for Radioactive Ion Acceleration”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TH201, pp. 745-748.
[n] G. G. Karady and H. A. Thiessen, “A Novel Concept for a Lithium Lens Exciter”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3132-3135.
[n] S. Yu et al., “Transmission characteristics of dark current in UED”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3035-3038. doi:10.18429/JACoW-IPAC2024-THPC25
[n] H. Huang, S. Y. Lee, and L. Ratner, “The Evolution of Tensor Polarization”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 432-435.
[n] A. Waghmare, C. Richman, J. Valladares, and W. Haynes, “LANSCE CCL klystron high potting investigation and improvements”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 859-862. doi:10.18429/JACoW-NAPAC2025-WEP084
[n] S. Kasaei et al., “Magnetic Characterization of Fast-Pulsed Quadrupole Magnets for Linac4”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP032, pp. 909-912.
[n] T. Yasui, H. Hotchi, S. Igarashi, and Y. Sato, “Beam loss simulations for space charge mitigation in J-PARC MR”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2097-2100. doi:10.18429/JACoW-IPAC2025-WEPM054
[n] T. N. Khabiboulline et al., “First High Gradient Test Results of a Dressed 325 MHz Superconducting Single Spoke Resonator at Fermilab”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP031, pp. 821-823.
[n] J.-S. Chai, Y. S. Lee, K.-H. Park, and K. R. Kim, “Design of Low Level RF Control System for Accelerator”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP093, pp. 274-276.
[n] R. De Prisco, M. Eshraqi, R. Miyamoto, E. Sargsyan, and A. R. Karlsson, “Error Study on the Normal Conducting ESS Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP042, pp. 942-944.
[n] A. N. Makarov, D. A. Kasatov, I. M. Shchudlo, and S. Yu. Taskaev, “Studying of the Accompanying Charged Particles in the Tandem Accelerator with Vacuum Insulation”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB16, pp. 189-190.
[n] E. Kako et al., “First Test Result of the IHEP-01 Large Grain 9-Cell Cavity”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP120, pp. 1022-1024.
[n] A. Dolinskii, K. Beckert, P. Beller, B. Franzke, F. Nolden, and M. Steck, “Design of a Collector Ring for Antiproton and Rare Isotope Beams”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE076, pp. 572-574.
[n] D. A. Amerkanov, S. A. Artamonov, E. M. Ivanov, G. A. Riabov, and V. A. Tonkikh, “Focusing Properties of the Magnetic Structure of Isochronous Cyclotrons With Large Spiraling Angle of Pole Tips”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 219-221. doi:10.18429/JACoW-RuPAC2021-MOPSA53
[n] C. Kondo et al., “High Reliability Digital Control Magnet Power Supply System for SPring-8-II”, presented at the IPAC'26, Deauville, France, May 2026, paper TUV7601, unpublished.
[n] R. Bossart, L. Burnod, J. Gareyte, V. Rossi, and B. de Raad, “The Damper of the Transverse Instabilities of the SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3284-3287.
[n] L. Ficcadenti et al., “A Biperiodic X-band RF Cavity for SPARC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH026, pp. 101-103.
[n] C. W. Roberson, “Free Electron Laser Beam Quality Research”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH070, pp. XX-XX.
[n] Z. W. Huang et al., “The Development of Gradient Damping Wiggler for ALPHA Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD043, pp. 3186-3188.
[n] A. Balzer, A. Efimenko, K. Holldack, and P. Sreelatha Devi, “HASMI: A configurable Python framework for automated harmonic analysis and scan orchestration at EMIL”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1292-1299. doi:10.18429/JACoW-ICALEPCS2025-THAG004
[n] Y. H. Wen, C. H. Chen, N. Y. Huang, W. K. Lau, and A. P. Lee, “Effects of Non-axisymmetric Solenoid Field on Beam Quality in Velocity Bunching”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1958-1960. doi:10.18429/JACoW-IPAC2017-TUPIK104
[n] B. Podobedov et al., “Progress Towards Soft X-Ray Beam Position Monitor Development”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 438-441. doi:10.18429/JACoW-IPAC2021-MOPAB121
[n] M. Balcewicz and C.-Y. Tan, “Benchmarking the use of BPM quadrupole moments to measure emittance”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 81-85. doi:10.18429/JACoW-NAPAC2025-MOP016
[n] Y. Sakamoto, S. Okuda, T. Kojima, and R. Taniguchi, “Electron Linac Based Coherent Radiation Light Source Project at OPU”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP029, pp. 456-458.
[n] T. Matsumoto et al., “Injector Linac Upgrade for SuperKEKB”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP011, pp. 70-72.
[n] F. V. Podgorny and B. I. Grishanov, “High Pulse and Average Power Low-induction Load”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT090, pp. 746-748.
[n] J. Wernsmann, F. Giesteira, and F. Lemery, “Development and laboratory validation of a precise alignment setup for electron beam-based THz radiation generation at European XFEL”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2523-2525. doi:10.18429/JACoW-IPAC2025-THPB012
[n] S. Guiducci et al., “The Modified DAFNE Wigglers”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF034, pp. 1678-1680.
[n] F. D. Dziuba et al., “The Superconducting Cw-Linac-Demonstrator at Gsi”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP041, pp. 145-147.
[n] T. F. Nikitina et al., “THE NSC KIPT ELECTRON LINACS - R&D AND APPLICATION”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THBM04, pp. XX-XX.
[n] G. Bittlingmaier, A. Lee, and G. Jackson, “An electrostatic fusion collider for interstellar propulsion”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 954-957. doi:10.18429/JACoW-NAPAC2025-THP008
[n] Z. A. Conway et al., “Low-level RF control of microphonics in superconducting spoke-loaded cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP67, pp. XX-XX.
[n] N. F. Petry, K. Kümpel, S. Lamprecht, O. Meusel, H. Podlech, and M. Schwarz, “Cavity R&D for HBS Accelerator”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 174-176. doi:10.18429/JACoW-LINAC2022-MOPOGE12
[n] Y. Kim, J. Yu, S. Park, and S. Kang, “Design of the machine interlock system for Korea-4GSR”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1656-1658. doi:10.18429/JACoW-ICALEPCS2025-THPD035
[n] T. Nissinen et al., “LHC Optics Measurements from Transverse Damper for the High Intensity Frontier”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 479-482. doi:10.18429/JACoW-HB2023-THBP14
[n] W. Zhang, P. Huang, Z. Huang, C. Wang, Y. Wei, and Y. Zhang, “Design of an X-band compact mode converter for converting TE10 mode to TE01 mode”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7618, unpublished.
[n] E. B. Forsyth, G. C. Pappas, J. E. Tuozzolo, and W. Zhang, “The RHIC Injection Fast Kicker”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR10, pp. 1921-1923.
[n] A. Adelmann et al., “OPAL and Future Directions Towards the Exascale Area”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA081, unpublished.
[n] B. E. Karlsen-Bæck et al., “Effects of Cavity Pre-Detuning on RF Power Transients at Injection into the LHC”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 530-533. doi:10.18429/JACoW-HB2023-THBP29
[n] E. Saldin, V. Kocharyan, S. Serkez, I. Zagorodnov, and G. Geloni, “Proposal to Generate 10 TW Level Femtosecond X-ray Pulses from a Baseline Undulator in Conventional SASE Regime at the European XFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP057, pp. 164-168.
[n] D. Gu and M. Zhang, “Start to End Beam dynamics optimization for the SHINE accelerator”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL146, unpublished.
[n] L. Jahnel and C. E. T. Goncalves da Silva, “Study of Energy Ramping Process Applied to the LNLS Synchrotron Light Source (Brazil)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 390-393.
[n] C. Tennant et al., “Experimental Investigation of Beam Breakup in the Jefferson Laboratory 10 kW FEL Upgrade Driver”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAC004, pp. 369-371.
[n] Y. B. Yan et al., “Overview and Status of the SHINE Control System”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 11-13. doi:10.18429/JACoW-PCaPAC2018-WEC3
[n] T. Kabana, B. Jacobson, C. Zimmer, E. Yang, N. Neveu, and S. Chowdhury, “Modernizing wire scan diagnostics for reproducible, real-time beam measurements through a modular Python middle layer integrated with EPICS”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 85-88. doi:10.18429/JACoW-NAPAC2025-MOP018
[n] E. Kravishvili et al., “Studies of longitudinal bunch-by-bunch feedback for SOLEIL II”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6108, unpublished.
[n] R. Iwai et al., “Operation and R&D of liquid lithium charge stripper at FRIB”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 327-331. doi:10.18429/JACoW-NAPAC2025-TUCD03
[n] A. P. Blondel, “Requirements for Accelerator-based Neutrino Facilities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS006, pp. 2406-2408.
[n] S. Park, J. Yu, S. Kang, and Y. Kim, “Design of the Korea-4GSR Timing system”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 678-680. doi:10.18429/JACoW-ICALEPCS2025-TUPD075
[n] W. Choi et al., “Progress on commissioning of the CARIE facility at LANL”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEP072, unpublished.
[n] K. Gofron, “Comprehensive Control Software for TimePix3 Detector Systems in EPICS Environment”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1285-1292. doi:10.18429/JACoW-ICALEPCS2025-THAG003
[n] K. Yokoyama et al., “Pulse-to-Pulse Mode Switching of KEKB Injector Linac”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP010, pp. 407-409.
[n] D. Hitz, D. Cormier, and J.-M. Mathonnet, “A New Room Temperature ECR Ion Source for Accelerator Facilities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI005, pp. 1718-1720.
[n] V. Maradia and A. Lomax, “Optimizing the layout for a highly efficient multi-room particle therapy facility with a minimal footprint”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR53, unpublished.
[n] S. Kladov, C. Emma, S. Gessner, Y.-K. Kim, and Z. Huang, “Simulations of CSR and LSC induced microbunching in the presence of a laser heater”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 570-574. doi:10.18429/JACoW-NAPAC2025-TUP086
[n] T. C. Tseng et al., “Bendable KB Type Focusing Mirrors Designed for TPS IR Beamline”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 17. doi:10.18429/JACoW-MEDSI2020-MOOB03
[n] R. Wuensch et al., “The Partial-Waveguide Resonator of the U100-FEL at FZ Rossendorf”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH016, pp. 345-348.
[n] W. S. Graves, “The CXFEL Project at Arizona State University”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 54-57. doi:10.18429/JACoW-FLS2023-TU1C4
[n] D. Franklin, E. Montgomery, O. Chubenko, S. Poddar, and S. Karkare, “Monte Carlo study of electron energy losses and stoichiometry effects in thin cesium antimonide photocathodes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2123-2125. doi:10.18429/JACoW-IPAC2024-WEPC66
[n] G. Mavrogenes, T. Khoe, and W. Wesolowski, “Space Charge Effects in High Current Linear Accelerator Transport Systems”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 478-481.
[n] N. Stilin et al., “Progress Towards RF Conditioning of Low-Loss Couplers for a Conduction-Cooled Cryomodule”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7312, unpublished.
[n] S. Heifets et al., “Impedance Study for the PEP-II B-factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC01, pp. 2317-2318.
[n] R. Roux et al., “PHIL: a Test Beam line at LAL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP078, pp. 2698-2700.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Facco et al., “Beam Dynamics Simulations of SARAF Accelerator including Error Propagation and Implications for the EURISOL Driver”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP074, pp. 426-428.
- G. Kube, J. Neugebauer, and F. Schmidt-F?Âhre, “BPM Resolution Studies at PETRA III”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 517-521.
- A. V. Otboyev and E. A. Perevedentsev, “On Self-Consistent -Functions of Colliding Bunches”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP22, pp. 1524-1526.
- R. C. Webber et al., “FNAL HINS Beam Measurements and the Future of High Intensity Linac Instrumentation”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP001, pp. 755-757.
- M. Mayerhofer et al., “Laser powder bed fusion for x-band RF cavities: A preliminary study”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB052, pp. 2616-2619.
- W. Qin and I. Zagorodnov, “General method of short-range wakefield calculation for corrugated structures of arbitrary shape”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL125, pp. 3405-3408.
- D. Dewitt and O. Boine-Frankenheim, “Beamline optimization for Laser-Accelerated Ions”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3009, this conference.
- M. Yamanaka et al., “Pressure Test for Large Grain and Fine Grain Niobium Cavities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1173-1174.
- J. Peters, “The HERA RF-Driven Multicusp H- Ion Source”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP061, pp. 388-390.
- V. Dompè, G. Latini, M. Ferrario, and S. Pioli, “The EuAPS betatron radiation source control system”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 919-924.
- S. Sato et al., “Installation of Beam Monitor Sensors in the LINAC Section of J-PARC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH061, pp. 1151-1153.
- D. Longuevergne et al., “Tests of Wire Sublimations Very Close to SPIRAL 2 Superconducting Cavity”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP005, pp. 783-785.
- C. M. Garcia Jaimes et al., “Parameter space for the magnetic design of Nested Magnets in the FCC-ee arc cell”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR11, pp. 2481-2484.
- S. S. Kurennoy, “A Method to Design Multi-Cell Accelerator Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4610-4612.
- J. Karmakar, S. Ghosh, S. Patel, and B. Sahu, “Beam optics simulations of achromatic section of Delhi Light Source”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM030, pp. 2024-2027.
- L. Faillace et al., “Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA134, pp. 2976-2979.
- A. I. Papash, E. Br?â, and A.-S. Mueller, “An Optimized Lattice for a Very Large Acceptance Compact Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1402-1405.
- S. Ahmadiannamin, J. Rahighi, Kh. S. Sarhadi, F. Abbasi, and M. Lamehi Rashti, “Design and Construction of 126 MHz Capacity Loaded Aluminium Cavity Prototype”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4653-4656.
- P. Komarov, S. Mitrofanov, A. Nikiforov, and V. Schegolev, “Modernization of the automated radiation monitoring system for the U400M cyclotron and the main building at FLNR”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS124, pp. 3213-3215.
- M. J. Boland, D. Bertwistle, F. Le Pimpec, and X. F. D. Stragier, “Status and Plans for the New CLS Electron Source Lab”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2614-2616.
- T.-J. Kuo et al., “Design of prototype magnet for FETS-FFA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR05, pp. 464-466.
- S. Kamada et al., “Conceptual Design of a Compact Electron Storage Ring System Dedicated to Coronary Angiography”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1468-1471.
- L. Catani et al., “Nb coating of copper cavities by UHV cathodic arc”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP70, pp. XX-XX.
- L. Antoniazzi, E. Fagotti, L. Ferrari, A. Palmieri, and A. Pisent, “Construction, assembly and measurements of the SPES RFQ”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL128, pp. 2027-2029.
- C. Lopez Osses et al., “AI-ready control infrastructure for cyclotron systems using GPU-accelerated Python GUIs and LabVIEW over ZeroMQ”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 42-45.
- W. Gu, H. Zha, J. Shi, and H. Chen, “Using octupoles to create uniform electron beam produced by irradiation accelerators”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR59, pp. 3653-3655.
- A. Chakrabarti et al., “Heavy Ion Radio-Frequency Quadrupole LINAC for VEC-RIB Facility”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP034, pp. 142-144.
- M. Ikegami, F. Naito, J. Qiang, and Y. Kondo, “Simulation Study of the RF Chopper”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP070, pp. 911-913.
- X. Yang, J. B. Murphy, H. J. Qian, S. Seletskiy, Y. Shen, and X. J. Wang, “Experimental Characterization and Optimization of High-brightness Electron Beam at the NSLS SDL”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP053, pp. 521-523.
- T. G. Lucas et al., “An Overview of the Radio-Frequency System for an Inverse Compton X-Ray Source Based on CLIC Technology”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2759-2761.
- W. Blokland, Y. Liu, B. W. Riemer, M. Wendel, and D. E. Winder, “Strain and Temperature Measurements From the SNS Mercury Target Vessel During High Intensity Beam Pulses”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1230-1233.
- W. Chou and T. Barts, “Impedance of a Perforated Liner and Its Impact on the SSC Collider”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3444-3447.
- Y. Kamiya, K. Shinoe, T. Koseki, H. Ohkuma, H. Kudo, and H. Takaki, “Measurement of the Orbit Parameters at SOR-RING”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1509-1512.
- M. Kuntzsch, A. Buechner, T. Kirschke, U. Lehnert, and F. Roeser, “Future Timing and Synchronization Scheme at ELBE”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD31, pp. 116-118.
- Y.-K. Kan and J. Qiang, “Validation of the slice model in beam-beam simulations”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC78, pp. 3217-3220.
- M. Dubouchet, A. Homs Puron, L. Claustre, S. Debionne, and V. Rey Bakaikoa, “ESRF's software strategy for high-throughput detectors: scalable data acquisition with real-time processing”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1340-1346.
- C.-M. Alvinerie, C. Taylor, and E.-C. Huang, “LANSCE beam transport model enhancement and validation”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 493-496.
- S. Sampayan et al., “Development of a Compact Radiography Accelerator Using Dielectric Wall Accelerator Technology”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAB010, pp. 716-718.
- S. Krave, V. Marinozzi, and R. Jayathilaka, “Tool chain for simulations of bi-filar coil winding for fast quench protection”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper MOP017, unpublished.
- G. Hallilingaiah, “Preliminary results of electromagnetic simulation for optimizing an SRF gun cavity to maximize the beam brightness”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper TUPB033, unpublished.
- S. Matsumoto et al., “Characteristics of Different Materials on High-Gradient Experiments”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP055, pp. 912-914.
- V. P. Derenchuk et al., “A Pulsed Ion Source for the IUCF Cooler Injector Synchroton”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W016, pp. 2737-2739.
- S. M. Pruss, C. Crawford, D. Finley, and M. Harrison, “Operational Experience with Using Collimators to Remove Halo in the Tevatron Collider”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 439-441.
- S. Bielawski, M.-E. Couprie, M. Hosaka, M. Katoh, A. Mochihashi, and C. Szwaj, “Influence of Optical Feedback on the Coherence Properties of FEL Oscillators”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THAAU04, pp. XX-XX.
- V. Baggiolini, D. Garcia Quintas, J. Wenninger, and J. P. Wozniak, “Software Interlocks System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB03, pp. 403-405.
- P. Putek, G. Hallilingaiah, M. Wenskat, S. Adrian, and U. van Rienen, “Multi-physics simulation of quadrupole resonators in the time domain under uncertainties”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA182, pp. 3063-3066.
- A. Halavanau and R. Robles, “Optimization of the optical design of cavity-based x-ray lasers”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL067, unpublished.
- T. Lofnes and V. Ziemann, “Fast Cooling Time Measurements in CELSIUS using a Third Generation Mobile Phone Signal Processing Device”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE116, pp. 1927-1929.
- U. Dorda and A. Fabich, “Implementation update of MYRRHA phase 1 (Minerva)”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4014, this conference.
- E. I. Simakov et al., “Possibilities for Fabricating Polymer Dielectric Laser Accelerator Structures with Additive Manufacturing”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4671-4674.
- S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Development of a Beam Induced Fluorescence Monitor for Non-Destructively Profiling MW Proton Beam at the J-PARC Neutrino Beamline”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 358-362.
- M. P. Stockli et al., “Ramping Up the SNS Beam Current with the LBNL Baseline H- Source”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP119, pp. 682-684.
- C.-F. Chang and C. Liu, “Detector protection system used in the Taiwan Photon Source 13A experimental station”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS035, pp. 3043-3045.
- M. Schwarz, S. Glukhov, A.-S. Mueller, and J. Schaefer, “Impact of the cSTART impedance on beam dynamics”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM080, pp. 2160-2163.
- F. Ames, “Charge State Boosters for Radioactive Ion Acceleration”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TH201, pp. 745-748.
- G. G. Karady and H. A. Thiessen, “A Novel Concept for a Lithium Lens Exciter”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3132-3135.
- S. Yu et al., “Transmission characteristics of dark current in UED”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC25, pp. 3035-3038.
- H. Huang, S. Y. Lee, and L. Ratner, “The Evolution of Tensor Polarization”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 432-435.
- A. Waghmare, C. Richman, J. Valladares, and W. Haynes, “LANSCE CCL klystron high potting investigation and improvements”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 859-862.
- S. Kasaei et al., “Magnetic Characterization of Fast-Pulsed Quadrupole Magnets for Linac4”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP032, pp. 909-912.
- T. Yasui, H. Hotchi, S. Igarashi, and Y. Sato, “Beam loss simulations for space charge mitigation in J-PARC MR”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, pp. 2097-2100.
- T. N. Khabiboulline et al., “First High Gradient Test Results of a Dressed 325 MHz Superconducting Single Spoke Resonator at Fermilab”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP031, pp. 821-823.
- J.-S. Chai, Y. S. Lee, K.-H. Park, and K. R. Kim, “Design of Low Level RF Control System for Accelerator”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP093, pp. 274-276.
- R. De Prisco, M. Eshraqi, R. Miyamoto, E. Sargsyan, and A. R. Karlsson, “Error Study on the Normal Conducting ESS Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP042, pp. 942-944.
- A. N. Makarov, D. A. Kasatov, I. M. Shchudlo, and S. Yu. Taskaev, “Studying of the Accompanying Charged Particles in the Tandem Accelerator with Vacuum Insulation”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB16, pp. 189-190.
- E. Kako et al., “First Test Result of the IHEP-01 Large Grain 9-Cell Cavity”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP120, pp. 1022-1024.
- A. Dolinskii, K. Beckert, P. Beller, B. Franzke, F. Nolden, and M. Steck, “Design of a Collector Ring for Antiproton and Rare Isotope Beams”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE076, pp. 572-574.
- D. A. Amerkanov, S. A. Artamonov, E. M. Ivanov, G. A. Riabov, and V. A. Tonkikh, “Focusing Properties of the Magnetic Structure of Isochronous Cyclotrons With Large Spiraling Angle of Pole Tips”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 219-221.
- C. Kondo et al., “High Reliability Digital Control Magnet Power Supply System for SPring-8-II”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUV7601, this conference.
- R. Bossart, L. Burnod, J. Gareyte, V. Rossi, and B. de Raad, “The Damper of the Transverse Instabilities of the SPS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3284-3287.
- L. Ficcadenti et al., “A Biperiodic X-band RF Cavity for SPARC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH026, pp. 101-103.
- C. W. Roberson, “Free Electron Laser Beam Quality Research”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH070, pp. XX-XX.
- Z. W. Huang et al., “The Development of Gradient Damping Wiggler for ALPHA Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD043, pp. 3186-3188.
- A. Balzer, A. Efimenko, K. Holldack, and P. Sreelatha Devi, “HASMI: A configurable Python framework for automated harmonic analysis and scan orchestration at EMIL”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1292-1299.
- Y. H. Wen, C. H. Chen, N. Y. Huang, W. K. Lau, and A. P. Lee, “Effects of Non-axisymmetric Solenoid Field on Beam Quality in Velocity Bunching”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1958-1960.
- B. Podobedov et al., “Progress Towards Soft X-Ray Beam Position Monitor Development”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 438-441.
- M. Balcewicz and C.-Y. Tan, “Benchmarking the use of BPM quadrupole moments to measure emittance”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 81-85.
- Y. Sakamoto, S. Okuda, T. Kojima, and R. Taniguchi, “Electron Linac Based Coherent Radiation Light Source Project at OPU”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP029, pp. 456-458.
- T. Matsumoto et al., “Injector Linac Upgrade for SuperKEKB”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP011, pp. 70-72.
- F. V. Podgorny and B. I. Grishanov, “High Pulse and Average Power Low-induction Load”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT090, pp. 746-748.
- J. Wernsmann, F. Giesteira, and F. Lemery, “Development and laboratory validation of a precise alignment setup for electron beam-based THz radiation generation at European XFEL”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB012, pp. 2523-2525.
- S. Guiducci et al., “The Modified DAFNE Wigglers”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF034, pp. 1678-1680.
- F. D. Dziuba et al., “The Superconducting Cw-Linac-Demonstrator at Gsi”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP041, pp. 145-147.
- T. F. Nikitina et al., “THE NSC KIPT ELECTRON LINACS - R&D AND APPLICATION”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THBM04, pp. XX-XX.
- G. Bittlingmaier, A. Lee, and G. Jackson, “An electrostatic fusion collider for interstellar propulsion”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 954-957.
- Z. A. Conway et al., “Low-level RF control of microphonics in superconducting spoke-loaded cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP67, pp. XX-XX.
- N. F. Petry, K. Kümpel, S. Lamprecht, O. Meusel, H. Podlech, and M. Schwarz, “Cavity R&D for HBS Accelerator”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 174-176.
- Y. Kim, J. Yu, S. Park, and S. Kang, “Design of the machine interlock system for Korea-4GSR”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1656-1658.
- T. Nissinen et al., “LHC Optics Measurements from Transverse Damper for the High Intensity Frontier”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP14, pp. 479-482.
- W. Zhang, P. Huang, Z. Huang, C. Wang, Y. Wei, and Y. Zhang, “Design of an X-band compact mode converter for converting TE10 mode to TE01 mode”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7618, this conference.
- E. B. Forsyth, G. C. Pappas, J. E. Tuozzolo, and W. Zhang, “The RHIC Injection Fast Kicker”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR10, pp. 1921-1923.
- A. Adelmann et al., “OPAL and Future Directions Towards the Exascale Area”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA081, unpublished.
- B. E. Karlsen-Bæck et al., “Effects of Cavity Pre-Detuning on RF Power Transients at Injection into the LHC”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP29, pp. 530-533.
- E. Saldin, V. Kocharyan, S. Serkez, I. Zagorodnov, and G. Geloni, “Proposal to Generate 10 TW Level Femtosecond X-ray Pulses from a Baseline Undulator in Conventional SASE Regime at the European XFEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP057, pp. 164-168.
- D. Gu and M. Zhang, “Start to End Beam dynamics optimization for the SHINE accelerator”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL146, unpublished.
- L. Jahnel and C. E. T. Goncalves da Silva, “Study of Energy Ramping Process Applied to the LNLS Synchrotron Light Source (Brazil)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 390-393.
- C. Tennant et al., “Experimental Investigation of Beam Breakup in the Jefferson Laboratory 10 kW FEL Upgrade Driver”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAC004, pp. 369-371.
- Y. B. Yan et al., “Overview and Status of the SHINE Control System”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 11-13.
- T. Kabana, B. Jacobson, C. Zimmer, E. Yang, N. Neveu, and S. Chowdhury, “Modernizing wire scan diagnostics for reproducible, real-time beam measurements through a modular Python middle layer integrated with EPICS”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 85-88.
- E. Kravishvili et al., “Studies of longitudinal bunch-by-bunch feedback for SOLEIL II”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6108, this conference.
- R. Iwai et al., “Operation and R&D of liquid lithium charge stripper at FRIB”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 327-331.
- A. P. Blondel, “Requirements for Accelerator-based Neutrino Facilities”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS006, pp. 2406-2408.
- S. Park, J. Yu, S. Kang, and Y. Kim, “Design of the Korea-4GSR Timing system”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 678-680.
- W. Choi et al., “Progress on commissioning of the CARIE facility at LANL”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper WEP072, unpublished.
- K. Gofron, “Comprehensive Control Software for TimePix3 Detector Systems in EPICS Environment”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1285-1292.
- K. Yokoyama et al., “Pulse-to-Pulse Mode Switching of KEKB Injector Linac”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP010, pp. 407-409.
- D. Hitz, D. Cormier, and J.-M. Mathonnet, “A New Room Temperature ECR Ion Source for Accelerator Facilities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI005, pp. 1718-1720.
- V. Maradia and A. Lomax, “Optimizing the layout for a highly efficient multi-room particle therapy facility with a minimal footprint”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR53, unpublished.
- S. Kladov, C. Emma, S. Gessner, Y.-K. Kim, and Z. Huang, “Simulations of CSR and LSC induced microbunching in the presence of a laser heater”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 570-574.
- T. C. Tseng et al., “Bendable KB Type Focusing Mirrors Designed for TPS IR Beamline”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 17.
- R. Wuensch et al., “The Partial-Waveguide Resonator of the U100-FEL at FZ Rossendorf”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH016, pp. 345-348.
- W. S. Graves, “The CXFEL Project at Arizona State University”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TU1C4, pp. 54-57.
- D. Franklin, E. Montgomery, O. Chubenko, S. Poddar, and S. Karkare, “Monte Carlo study of electron energy losses and stoichiometry effects in thin cesium antimonide photocathodes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC66, pp. 2123-2125.
- G. Mavrogenes, T. Khoe, and W. Wesolowski, “Space Charge Effects in High Current Linear Accelerator Transport Systems”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 478-481.
- N. Stilin et al., “Progress Towards RF Conditioning of Low-Loss Couplers for a Conduction-Cooled Cryomodule”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7312, this conference.
- S. Heifets et al., “Impedance Study for the PEP-II B-factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC01, pp. 2317-2318.
- R. Roux et al., “PHIL: a Test Beam line at LAL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP078, pp. 2698-2700.
Back to search