Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Colton, “Transverse Beam Containment in the ANL 4-GeV Microtron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3221-3224.
[n] M. K. Kim, J. S. Hong, and T. H. Tak, “The Implementation of KSTAR Fast Interlock System using C-RIO”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 337-340. doi:10.18429/JACoW-ICALEPCS2017-TUMPA03
[n] S. W. Herb, “Construction and Measurement of Large Permanent Magnet Quadrupoles”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1434-1437.
[n] H. Fukuma, “Beam Instrumentation in SuperKEKB”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 164-167. doi:10.18429/JACoW-eeFACT2016-WET1H3
[n] I. Hofmann and O. Boine-Frankenheim, “Stochastic Noise Effects in High Current PIC Simulation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3101-3103. doi:10.18429/JACoW-IPAC2014-THPRO092
[n] V. Sajaev and L. Emery, “Dynamic Aperture Study and Lifetime Improvement at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE064, pp. 3632-3634.
[n] V. Ptitsyn, M. Bai, and T. Roser, “Spin Tune Dependence on Closed Orbit in RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE054, pp. 4641-4643.
[n] G. De Rijk, “The CERN High Field Magnet Program”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD009, pp. 2419-2421.
[n] H. Freund et al., “Comparative Design Studies for the BESSY FEL Program using the MEDUSA and GENESIS Simulation Codes”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP028, pp. XX-XX.
[n] B. Rusnak, P. Fitsos, M. Hall, P. Peaslee, and R. Souza, “A High-Intensity Neutron Production Source based on Rotary Valving”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA14, pp. 1385-1387.
[n] P. A. Chamouard, J. M. Lefebvre, M. Olivier, and M. Prom?®, “Deuterons Acceleration with the SATURNE Linac”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P05, pp. 326-329.
[n] P. Gagliardi, V. Sciutto, F. Terzi, and G. Zoni, “Manufacturing Experience at Ansaldo in Large Scale Production of Superconducting Cavities for LEP-2 Project”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D30, pp. 1081-1089.
[n] V. Volkov, J. Knobloch, A. N. Matveenko, and A. Neumann, “High Power Processing at a High Order Mode Frequency”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP096, pp. 697-699.
[n] P. F. Meads Jr, “A New FFAG Orbit Code”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2243-2246.
[n] C. Limborg, “A Review of Difficulties in Achieving Short Bunches in Storage Rings”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THX02A, pp. 151-158.
[n] C. Wang and J. L. Hirshfield, “Simulation Study of Multi-Stage Proton Cyclotron Resonance Accelerator -- PROCRA”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH070, pp. 3389-3391.
[n] M. Pekeler, “Test Results on the Superconducting 9-cell 1.3 GHz Cavities for the TESLA Test Facility Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOB02B, pp. 302-304.
[n] G. Tranquille, “The ELENA Beam Diagnostics Systems”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC05, pp. 664-666.
[n] E. Kashy, G. F. Trentelman, and R. K. Jolly, “High Resolution Nuclear Studies Using Cyclotron Beams”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69D14, pp. XX-XX.
[n] V. Sharma, S. Acharya, S. Gond, K. C. Mittal, and R. N. Rajan, “PLC Controlled Search & Secure Safety Interlock System for Accelerator”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD03, pp. 142-143.
[n] T. Chanwattana, R. Bartolini, A. Seryi, and E. Tsesmelis, “Short Pulses THz FEL for the Oxford Accelerator Science Laboratory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2934-2936. doi:10.18429/JACoW-IPAC2014-THPRO031
[n] S. Boucher et al., “Magnet Design and Testing of a FFAG Betatron for Industrial and Security Applications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP047, pp. 1390-1390.
[n] L. W. Alvarez, “History of Proton Linear Accelerators”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO1-1, pp. 3-9.
[n] T. Suwada, M. Satoh, K. Minoshima, and S. Terada, “Experimental Study on New Laser-based Alignment System utilizing a Sequential Three-point Method at the KEKB Injector Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO025, pp. 532-534.
[n] P. Fernandes and R. Parodi, “OSCAR2D, A Computer Code for the Design of RF Cavities and Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-33, pp. 330-332.
[n] I. J. Gillingham and T. M. Cobb, “MalcolmJS: a Browser-Based Graphical User Interface”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1869-1872. doi:10.18429/JACoW-ICALEPCS2017-THPHA184
[n] K. V. Nagesh, “Theoretical Analysis of the Recovery Times in Low Pressure Sparkgaps - Positive Ion Diffusion Method”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA065, pp. 723-725.
[n] M. Br?â and R. Wischnewski, “A Time Stamping TDC for SPEC and ZEN Platforms Based on White Rabbit”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1587-1589. doi:10.18429/JACoW-ICALEPCS2017-THPHA088
[n] J. Chen, L. Lai, and R. Yuan, “Online position conversion factor calibration study for BPM system”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 736-739. doi:10.18429/JACoW-IBIC2025-WEPMO09
For LaTeX
Use Complete Form
For BibTeX
References
- E. Colton, “Transverse Beam Containment in the ANL 4-GeV Microtron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3221-3224.
- M. K. Kim, J. S. Hong, and T. H. Tak, “The Implementation of KSTAR Fast Interlock System using C-RIO”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 337-340.
- S. W. Herb, “Construction and Measurement of Large Permanent Magnet Quadrupoles”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1434-1437.
- H. Fukuma, “Beam Instrumentation in SuperKEKB”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 164-167.
- I. Hofmann and O. Boine-Frankenheim, “Stochastic Noise Effects in High Current PIC Simulation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3101-3103.
- V. Sajaev and L. Emery, “Dynamic Aperture Study and Lifetime Improvement at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE064, pp. 3632-3634.
- V. Ptitsyn, M. Bai, and T. Roser, “Spin Tune Dependence on Closed Orbit in RHIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE054, pp. 4641-4643.
- G. De Rijk, “The CERN High Field Magnet Program”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD009, pp. 2419-2421.
- H. Freund et al., “Comparative Design Studies for the BESSY FEL Program using the MEDUSA and GENESIS Simulation Codes”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP028, pp. XX-XX.
- B. Rusnak, P. Fitsos, M. Hall, P. Peaslee, and R. Souza, “A High-Intensity Neutron Production Source based on Rotary Valving”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA14, pp. 1385-1387.
- P. A. Chamouard, J. M. Lefebvre, M. Olivier, and M. Prom?®, “Deuterons Acceleration with the SATURNE Linac”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P05, pp. 326-329.
- P. Gagliardi, V. Sciutto, F. Terzi, and G. Zoni, “Manufacturing Experience at Ansaldo in Large Scale Production of Superconducting Cavities for LEP-2 Project”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D30, pp. 1081-1089.
- V. Volkov, J. Knobloch, A. N. Matveenko, and A. Neumann, “High Power Processing at a High Order Mode Frequency”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP096, pp. 697-699.
- P. F. Meads Jr, “A New FFAG Orbit Code”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2243-2246.
- C. Limborg, “A Review of Difficulties in Achieving Short Bunches in Storage Rings”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THX02A, pp. 151-158.
- C. Wang and J. L. Hirshfield, “Simulation Study of Multi-Stage Proton Cyclotron Resonance Accelerator -- PROCRA”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH070, pp. 3389-3391.
- M. Pekeler, “Test Results on the Superconducting 9-cell 1.3 GHz Cavities for the TESLA Test Facility Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOB02B, pp. 302-304.
- G. Tranquille, “The ELENA Beam Diagnostics Systems”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC05, pp. 664-666.
- E. Kashy, G. F. Trentelman, and R. K. Jolly, “High Resolution Nuclear Studies Using Cyclotron Beams”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69D14, pp. XX-XX.
- V. Sharma, S. Acharya, S. Gond, K. C. Mittal, and R. N. Rajan, “PLC Controlled Search & Secure Safety Interlock System for Accelerator”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD03, pp. 142-143.
- T. Chanwattana, R. Bartolini, A. Seryi, and E. Tsesmelis, “Short Pulses THz FEL for the Oxford Accelerator Science Laboratory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2934-2936.
- S. Boucher et al., “Magnet Design and Testing of a FFAG Betatron for Industrial and Security Applications”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP047, pp. 1390-1390.
- L. W. Alvarez, “History of Proton Linear Accelerators”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO1-1, pp. 3-9.
- T. Suwada, M. Satoh, K. Minoshima, and S. Terada, “Experimental Study on New Laser-based Alignment System utilizing a Sequential Three-point Method at the KEKB Injector Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO025, pp. 532-534.
- P. Fernandes and R. Parodi, “OSCAR2D, A Computer Code for the Design of RF Cavities and Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-33, pp. 330-332.
- I. J. Gillingham and T. M. Cobb, “MalcolmJS: a Browser-Based Graphical User Interface”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1869-1872.
- K. V. Nagesh, “Theoretical Analysis of the Recovery Times in Low Pressure Sparkgaps - Positive Ion Diffusion Method”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA065, pp. 723-725.
- M. Br?â and R. Wischnewski, “A Time Stamping TDC for SPEC and ZEN Platforms Based on White Rabbit”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1587-1589.
- J. Chen, L. Lai, and R. Yuan, “Online position conversion factor calibration study for BPM system”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 736-739.
Back to search