Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. W. Wang et al., “Fabrication Technologies of the High Gradient Accelerator Structures at 100MV/m Range”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA064, pp. 3819-3821.
[n] A. Vannozzi et al., “Magnetic measurements for Halbach-type permanent quadrupoles using a single-stretched wire system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3864-3867. doi:10.18429/JACoW-IPAC2024-THPS54
[n] B. Heusch, “Review of Electrostatic Accelerators”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 91-96.
[n] L. Rivkin et al., “The Swiss Light Source Accelerator Complex: An Overview”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP28G, pp. 623-625.
[n] G. Hutter and N. Angert, “Improvement of the 108 MHz RF-Amplifiers for the Unilac Alvarez Structure”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3012-3014.
[n] Yu. G. Alenitskiy and N. A. Morozov, “Computor Modelling of Magnetic Structure for IC-35 Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-04, pp. 462-465.
[n] Ch. Steinbach and M. van Rooij, “A Scanning Wire Beam Profile Monitor”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1920-1923.
[n] V. V. Paramonov and L. V. Kravchuk, “The Compensated Periodical Structure RF Deflector”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA12, pp. 404-406.
[n] A. J. Rose, A. I. Bell, M. T. Heron, and S. C. Lay, “Permanent Magnet Insertion Device Control Systems on Diamond”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP004, pp. 174-176.
[n] Kuo C.H., Hsu K.T., Lau W.K., Wang C.J., Yeh M.S., “Longitudinal Feedback System Software Development in TLS”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TC1P23, pp. XX-XX.
[n] YU Qingchang, XU Taoguang, OUYANG Huafu,GUAN Xialing, “A PROTON ACCELERATOR COMPLEX FOR SPALLATION NUETRON SOURCE AND OTHER APPLICATION”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP043, pp. XX-XX.
[n] C.-W. Chen, C.-S. Yang, C.-K. Yang, H. Chen, and J.-C. Huang, “Integrated Hall probe and stretched wire measurement system for an in-vacuum undulator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1398-1401. doi:10.18429/JACoW-IPAC2024-TUPG64
[n] V. A. Karpov, A. V. Serov, and V. V. Mikhailin, “OPERATION OF SYNCHROTRON PAKHRA IN SYNCHROTRON RADIATION SOURCE MODE”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAAU02, pp. XX-XX.
[n] S. Krinsky and R. L. Gluckstern, “Higher-Order Terms in a Perturbation Expansion for the Impedance of a Corrugated Wave Guide”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2621-2624.
[n] B. Schillinger, T. Weiland, and B. Langenbeck, “Ion Optical Stray Field Analysis of an ESR Dipole”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P096, pp. 2594-2596.
[n] C. Ohmori et al., “High Field Gradient Cavity for J-PARC 3 GeV RCS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEOACH01, pp. 123-125.
[n] Y. Luo et al., “Calculation of Action Diffusion With Crabbed Collision in eRHIC”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 549-552. doi:10.18429/JACoW-NAPAC2019-TUPLO07
[n] G. Parzen, “Strong Intrabeam Scattering in Heavy Ion and Proton Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2326-2329.
[n] K. Halbach, “Effect of Drift Tube Tolerances on the Electric Field Distribution along the Length of an Alvarez Cavity”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper K-7, pp. 1141-1149.
[n] K. T. Hsu, J. Chen, K. H. Hu, and C. H. Kuo, “Diagnostics Update of the Taiwan Light Source”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM102, pp. 454-458.
[n] Y. Iwashita, “Mitigation of Power Loss Due to Skin Effect by Thin-Layered Film”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP086, pp. 785-787.
[n] C. H. Kuo, J. Chen, K.-T. Hsu, K. H. Hu, and D. Lee, “The Operating of Digital Beam Position Monitor in NSRRC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT090, pp. 2706-2708.
[n] M. Hassani, H. Afarideh, and Y. Ghorashinejad, “Development of Control System for 10 MeV Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 319-321. doi:10.18429/JACoW-Cyclotrons2016-THP07
[n] E. Benedetto and M. Vretenar, “Innovations in the Next Generation Medical Accelerators for Therapy with Ion Beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5083-5086. doi:10.18429/JACoW-IPAC2023-THPM090
[n] H. Heydari and T. Tille, “Reason for Free Electrons from the Surface of Ferroelectrics with a Metal Lattice Structure”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W037, pp. 2784-2786.
[n] G. Marot and R. Bennett, “The Design of Photon Absorbers for the ESRF Vacuum Chamber”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1240-1243.
[n] E. N. Zaplatin, A. Kanareykin, and V. P. Yakovlev, “Microphonics Passive Damping”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 423-427. doi:10.18429/JACoW-SRF2017-TUPB020
[n] M. C. Chou, N. Y. Huang, W. K. Lau, and A. P. Lee, “The Seed Laser System for the Proposed VUV FEL Facility at NSRRC”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP018, pp. 718-721.
[n] M. Zhuang, L. B. Hu, and Z. G. Zhu, “Conceptual Design of the Cryogenic Control System of CFETR TF Coil Test Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1502-1506. doi:10.18429/JACoW-ICALEPCS2017-THPHA060
[n] M. Masaki, “Conceptual Design of an Insertion Device for Non-Destructive Beam Diagnostics of a Low-Emittance Synchrotron Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT092, pp. 4275-4277.
[n] K. L. F. Bane, T. O. Raubenheimer, A. Romanenko, and V. P. Yakovlev, “Wakefields in the Superconducting RF Cavities of LCLS-II”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP124, pp. 1147-1150.
[n] W. Ackermann and T. Weiland, “Data Base Extension for the Ensemble Model Using a Flexible Implementation”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT079, pp. 4036-4038.
[n] T. H. Luo and S.-Y. Lee, “Design of a Fast Extraction Kicker for the ALPHA Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA052, pp. 3792-3794.
[n] D. Terzani, C. Schroeder, C. Benedetti, E. Esarey, and S. Bulanov, “Compact, all-optical positron production and collection scheme”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR20, unpublished.
[n] D. Boussard, “Control of Cavities with High Beam Loading”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1852-1857.
[n] E. W. Blackmore et al., “Improved Beam Quality at TRIUMF”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3218-3221.
[n] J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2320-2323.
[n] L. Schaechter, “PASER: Particle Acceleration by Stimulated Emission of Radiation”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP129G, pp. 851-853.
[n] M. Masuzawa, K. Egawa, and K. Tsuchiya, “Feasibility Study of a Permanent Magnet Made from High-Tc Bulk Superconductor”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS089, pp. 2580-2582.
[n] F. Kurian et al., “Field Attenuation of the Magnetic Shield for a Cryogenic Current Comparator”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG001, pp. 17-19.
[n] C.-Y. Tsai, “Suppressing CSR Microbunching in Recirculation Arcs”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1784-1789. doi:10.18429/JACoW-IPAC2018-WEYGBE1
[n] H. Geng, J. Xing, H. Xu, W. Yanru, C. Yu, and Y. Zhang, “Commissioning of BEPCII Upgrade”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1606, unpublished.
[n] R. Bachelard et al., “Radiation from a Laser-Plasma Accelerated Electron Beam Passing Through an Undulator”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC50, pp. 138-141.
[n] J. F. Cardona and R. Tomas, “Non Linear Error Analysis from Orbit Measurements in SPS and RHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE028, pp. 2012-2014.
[n] Yu. V. Bylinsky, S. V. Dvortsov, A. V. Feschenko, S. J. Jarylkapov, and P. N. Ostroumov, “Setting of RF Phase and Amplitude in Multi-Tank Ion Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-69, pp. 805-807.
[n] Y. Hong, J. Wu, B. Yang, and G. Zhou, “Analytical Thermal Analysis of Thin Diamond in High-Intensity High-Repetition-Rate Application”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 587-590. doi:10.18429/JACoW-NAPAC2019-TUPLE13
[n] J. Fernández, J. Benavides, P. Gil, A. M. Lopez Antequera, and A. Méndez Campuzano, “Design and Performance of a MicroTCA-Based LLRF Hardware Platform for the ALBA Synchrotron at the 1.5 GHz Third Harmonic”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6142, unpublished.
[n] G. T. Danby and J. W. Jackson, “Ultraprecise Magnet Design and Shimming”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1517-1520.
[n] A. Warner et al., “Machine Protection System Research and Development for the Fermilab PIP-II Proton Linac”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1643-1645. doi:10.18429/JACoW-ICALEPCS2017-THPHA110
[n] C. F. Papadopoulos et al., “Longitudinal and Transverse Optimization for a High Repetition Rate Injector”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP057, pp. 864-867.
[n] S. Rimjaem et al., “Beam Characterizations at Femtosecond Electron Beam Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT074, pp. 3925-3927.
[n] M. Xiao, “Measurements and Corrections of the Recycler Lattice at Fermilab”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA13, pp. 82-84.
[n] G. Di Massa and M. R. Masullo, “Open Resonator in the Microwave Region”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 880-883.
[n] T. H. Nicol, “Multiple Element Vapor Cooled Current Leads for the Fermilab Energy Saver Correction Elements”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3317-3320.
[n] C. Y. Liao, Y.-S. Cheng, K. T. Hsu, K. H. Hu, C. H. Huang, and C. Y. Wu, “Beam Trip Diagnostics for the TPS”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 458-460. doi:10.18429/JACoW-IBIC2017-WEPWC07
[n] G. Ambrosio et al., “Conceptual Design of the the Fermilab Nb3Sn High Field Dipole Model”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUBR3, pp. 174-176.
[n] A. Koschik, H. Burkhardt, T. Risselada, and F. Schmidt, “On the Implementation of Experimental Solenoids in MAD-X and their Effect on Coupling in the LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH043, pp. 2011-2013.
[n] E. Echeverria, A. Flint, C. Pennington, M. Andorf, J. Maxson, and A. Galdi, “First Steps Toward Molecular beam epitaxial growth of potassium antimonide photocathodes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2068-2071. doi:10.18429/JACoW-IPAC2024-WEPC47
For LaTeX
Use Complete Form
For BibTeX
References
- J. W. Wang et al., “Fabrication Technologies of the High Gradient Accelerator Structures at 100MV/m Range”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA064, pp. 3819-3821.
- A. Vannozzi et al., “Magnetic measurements for Halbach-type permanent quadrupoles using a single-stretched wire system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS54, pp. 3864-3867.
- B. Heusch, “Review of Electrostatic Accelerators”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 91-96.
- L. Rivkin et al., “The Swiss Light Source Accelerator Complex: An Overview”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP28G, pp. 623-625.
- G. Hutter and N. Angert, “Improvement of the 108 MHz RF-Amplifiers for the Unilac Alvarez Structure”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3012-3014.
- Yu. G. Alenitskiy and N. A. Morozov, “Computor Modelling of Magnetic Structure for IC-35 Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-04, pp. 462-465.
- Ch. Steinbach and M. van Rooij, “A Scanning Wire Beam Profile Monitor”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1920-1923.
- V. V. Paramonov and L. V. Kravchuk, “The Compensated Periodical Structure RF Deflector”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUA12, pp. 404-406.
- A. J. Rose, A. I. Bell, M. T. Heron, and S. C. Lay, “Permanent Magnet Insertion Device Control Systems on Diamond”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP004, pp. 174-176.
- Kuo C.H., Hsu K.T., Lau W.K., Wang C.J., Yeh M.S., “Longitudinal Feedback System Software Development in TLS”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TC1P23, pp. XX-XX.
- YU Qingchang, XU Taoguang, OUYANG Huafu,GUAN Xialing, “A PROTON ACCELERATOR COMPLEX FOR SPALLATION NUETRON SOURCE AND OTHER APPLICATION”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP043, pp. XX-XX.
- C.-W. Chen, C.-S. Yang, C.-K. Yang, H. Chen, and J.-C. Huang, “Integrated Hall probe and stretched wire measurement system for an in-vacuum undulator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG64, pp. 1398-1401.
- V. A. Karpov, A. V. Serov, and V. V. Mikhailin, “OPERATION OF SYNCHROTRON PAKHRA IN SYNCHROTRON RADIATION SOURCE MODE”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAAU02, pp. XX-XX.
- S. Krinsky and R. L. Gluckstern, “Higher-Order Terms in a Perturbation Expansion for the Impedance of a Corrugated Wave Guide”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2621-2624.
- B. Schillinger, T. Weiland, and B. Langenbeck, “Ion Optical Stray Field Analysis of an ESR Dipole”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P096, pp. 2594-2596.
- C. Ohmori et al., “High Field Gradient Cavity for J-PARC 3 GeV RCS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEOACH01, pp. 123-125.
- Y. Luo et al., “Calculation of Action Diffusion With Crabbed Collision in eRHIC”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 549-552.
- G. Parzen, “Strong Intrabeam Scattering in Heavy Ion and Proton Beams”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2326-2329.
- K. Halbach, “Effect of Drift Tube Tolerances on the Electric Field Distribution along the Length of an Alvarez Cavity”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper K-7, pp. 1141-1149.
- K. T. Hsu, J. Chen, K. H. Hu, and C. H. Kuo, “Diagnostics Update of the Taiwan Light Source”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM102, pp. 454-458.
- Y. Iwashita, “Mitigation of Power Loss Due to Skin Effect by Thin-Layered Film”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP086, pp. 785-787.
- C. H. Kuo, J. Chen, K.-T. Hsu, K. H. Hu, and D. Lee, “The Operating of Digital Beam Position Monitor in NSRRC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT090, pp. 2706-2708.
- M. Hassani, H. Afarideh, and Y. Ghorashinejad, “Development of Control System for 10 MeV Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 319-321.
- E. Benedetto and M. Vretenar, “Innovations in the Next Generation Medical Accelerators for Therapy with Ion Beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM090, pp. 5083-5086.
- H. Heydari and T. Tille, “Reason for Free Electrons from the Surface of Ferroelectrics with a Metal Lattice Structure”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W037, pp. 2784-2786.
- G. Marot and R. Bennett, “The Design of Photon Absorbers for the ESRF Vacuum Chamber”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1240-1243.
- E. N. Zaplatin, A. Kanareykin, and V. P. Yakovlev, “Microphonics Passive Damping”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 423-427.
- M. C. Chou, N. Y. Huang, W. K. Lau, and A. P. Lee, “The Seed Laser System for the Proposed VUV FEL Facility at NSRRC”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP018, pp. 718-721.
- M. Zhuang, L. B. Hu, and Z. G. Zhu, “Conceptual Design of the Cryogenic Control System of CFETR TF Coil Test Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1502-1506.
- M. Masaki, “Conceptual Design of an Insertion Device for Non-Destructive Beam Diagnostics of a Low-Emittance Synchrotron Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT092, pp. 4275-4277.
- K. L. F. Bane, T. O. Raubenheimer, A. Romanenko, and V. P. Yakovlev, “Wakefields in the Superconducting RF Cavities of LCLS-II”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP124, pp. 1147-1150.
- W. Ackermann and T. Weiland, “Data Base Extension for the Ensemble Model Using a Flexible Implementation”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT079, pp. 4036-4038.
- T. H. Luo and S.-Y. Lee, “Design of a Fast Extraction Kicker for the ALPHA Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA052, pp. 3792-3794.
- D. Terzani, C. Schroeder, C. Benedetti, E. Esarey, and S. Bulanov, “Compact, all-optical positron production and collection scheme”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR20, unpublished.
- D. Boussard, “Control of Cavities with High Beam Loading”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1852-1857.
- E. W. Blackmore et al., “Improved Beam Quality at TRIUMF”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3218-3221.
- J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2320-2323.
- L. Schaechter, “PASER: Particle Acceleration by Stimulated Emission of Radiation”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP129G, pp. 851-853.
- M. Masuzawa, K. Egawa, and K. Tsuchiya, “Feasibility Study of a Permanent Magnet Made from High-Tc Bulk Superconductor”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS089, pp. 2580-2582.
- F. Kurian et al., “Field Attenuation of the Magnetic Shield for a Cryogenic Current Comparator”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG001, pp. 17-19.
- C.-Y. Tsai, “Suppressing CSR Microbunching in Recirculation Arcs”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1784-1789.
- H. Geng, J. Xing, H. Xu, W. Yanru, C. Yu, and Y. Zhang, “Commissioning of BEPCII Upgrade”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1606, this conference.
- R. Bachelard et al., “Radiation from a Laser-Plasma Accelerated Electron Beam Passing Through an Undulator”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC50, pp. 138-141.
- J. F. Cardona and R. Tomas, “Non Linear Error Analysis from Orbit Measurements in SPS and RHIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE028, pp. 2012-2014.
- Yu. V. Bylinsky, S. V. Dvortsov, A. V. Feschenko, S. J. Jarylkapov, and P. N. Ostroumov, “Setting of RF Phase and Amplitude in Multi-Tank Ion Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-69, pp. 805-807.
- Y. Hong, J. Wu, B. Yang, and G. Zhou, “Analytical Thermal Analysis of Thin Diamond in High-Intensity High-Repetition-Rate Application”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 587-590.
- J. Fernández, J. Benavides, P. Gil, A. M. Lopez Antequera, and A. Méndez Campuzano, “Design and Performance of a MicroTCA-Based LLRF Hardware Platform for the ALBA Synchrotron at the 1.5 GHz Third Harmonic”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6142, this conference.
- G. T. Danby and J. W. Jackson, “Ultraprecise Magnet Design and Shimming”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1517-1520.
- A. Warner et al., “Machine Protection System Research and Development for the Fermilab PIP-II Proton Linac”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1643-1645.
- C. F. Papadopoulos et al., “Longitudinal and Transverse Optimization for a High Repetition Rate Injector”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP057, pp. 864-867.
- S. Rimjaem et al., “Beam Characterizations at Femtosecond Electron Beam Facility”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT074, pp. 3925-3927.
- M. Xiao, “Measurements and Corrections of the Recycler Lattice at Fermilab”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA13, pp. 82-84.
- G. Di Massa and M. R. Masullo, “Open Resonator in the Microwave Region”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 880-883.
- T. H. Nicol, “Multiple Element Vapor Cooled Current Leads for the Fermilab Energy Saver Correction Elements”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3317-3320.
- C. Y. Liao, Y.-S. Cheng, K. T. Hsu, K. H. Hu, C. H. Huang, and C. Y. Wu, “Beam Trip Diagnostics for the TPS”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 458-460.
- G. Ambrosio et al., “Conceptual Design of the the Fermilab Nb3Sn High Field Dipole Model”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUBR3, pp. 174-176.
- A. Koschik, H. Burkhardt, T. Risselada, and F. Schmidt, “On the Implementation of Experimental Solenoids in MAD-X and their Effect on Coupling in the LHC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH043, pp. 2011-2013.
- E. Echeverria, A. Flint, C. Pennington, M. Andorf, J. Maxson, and A. Galdi, “First Steps Toward Molecular beam epitaxial growth of potassium antimonide photocathodes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC47, pp. 2068-2071.
Back to search