Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Madysa, S. Appel, L. Dingeldein, J. Fitzek, V. Kain, and M. Schenk, “Geoff developments in 2025”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1219-1223. doi:10.18429/JACoW-ICALEPCS2025-WEPD076
[n] N. Higashi, K. Harada, Y. Kobayashi, S. Nagahashi, N. Nakamura, and A. Ueda, “New HMBA Lattice for PF-AR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2684-2686. doi:10.18429/JACoW-IPAC2017-WEPAB046
[n] G. Arduini et al., “LEP Operation and Performance with 100 GeV Colliding Beams”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUOBF101, pp. 265-267.
[n] W. K. Lau et al., “Characterization and Tuning of a Microwave Gun Cavity”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT021, pp. 1748-1750.
[n] A. Smirnov, A. Sidorin, D. Krestnikov, R. Pivin, D. Prasuhn, and M. Wolke, “SIMULATION OF PELLET TARGET EXPERIMENTS WITH BETACOOL DODE”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH04, pp. XX-XX.
[n] I. L. Sheynman and A. Kanareykin, “Definition of Focusing System Parameters on the Basis of the Analysis of a Transverse Bunch Dynamics in Dielectric Loaded Wakefield Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD058, pp. 4416-4418.
[n] B. W. Allardyce, “A New Isotope Separator at the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper N-04, pp. 752-755.
[n] J. A. Clarke, F. E. Hannon, and D. J. Scott, “The Initial Insertion Devices for the DIAMOND Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE028, pp. 2607-2609.
[n] G. Lopez, “Quench Simulations of the 40 mm Aperture SSC-Quadrupole Magnet Connected in Series with 50 mm Aperture SSC-Dipole Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2784-2787.
[n] J. W. Staples, H. D. Lancaster, and R. B. Yourd, “A Wideroe-Based Heavy Ion Preaccelerator for the SuperHILAC”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3739-3742.
[n] G. W. Kuswa, “Inertial Confinement Fusion Energy with Particle Beams”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 975-981.
[n] H. Thimmel and P. Wucherer, “Extraction from the Juelich 90 - Me V - d AEG-Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 474-479.
[n] F. Zhou, “LCLS-II photo-injector operational challenges and developments”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM051, unpublished.
[n] C. A. Méndez, T. Arias, M. Liepe, and N. Sitaraman, “Theoretical Study of Thin Noble-Metal Films on the Niobium Surface”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 230-233. doi:10.18429/JACoW-SRF2023-MOPMB053
[n] H. Park, S. U. De Silva, and J. R. Delayen, “Measurement of Surface Resistance Properties with Coaxial Resonators - Review”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 374-380. doi:10.18429/JACoW-SRF2019-TUFUB7
[n] M. F. Shea, R. J. Florian, R. W. Goodwin, A. J. Lennox, and D. M. Shea, “Control System for the Neutron Therapy Facility at Fermilab”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1660-1663.
[n] E. H. R. Gaxiola, G. Arduini, W. H?Âfle, F. Roncarolo, E. Vogel, and E. Vossenberg, “Performance of the CERN SPS Fast Extraction for the CNGS Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT022, pp. 1757-1759.
[n] I. L. Azhgirey et al., “Benchmarking of the Radiation Environment Simulations for CMS Experiment at LHC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2235-2238. doi:10.18429/JACoW-IPAC2021-TUPAB317
[n] J. T. Maniscalco et al., “LCLS-II-HE Cavity Qualification Testing”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 279-281. doi:10.18429/JACoW-SRF2023-MOPMB072
[n] P. Hermes, “Demonstrating the feasibility of a double-crystal fixed-target experimental physics setup through the TWOCRYST project in the LHC”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 627-630. doi:10.18429/JACoW-IPAC2025-MOPS018
[n] H. Akiyama, K. Hiramoto, and H. Kubo, “Development of Magnet Power Supply System for Fast Pattern Excitation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A04, pp. 2196-2198.
[n] H.-W. Luo, M.-S. Chiu, P. J. Chou, N.-Y. Huang, and F.-H. Tseng, “Design of a new booster to storage ring transfer line for nonlinear kicker injection scheme in Taiwan Photon Source”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2685, unpublished.
[n] I. Drebot et al., “Modelling of the HB2TF injector in COMSOL with benchmarking using Astra and RF-track”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5081, unpublished.
[n] C. Spezzani et al., “Coherent free-electron laser light with circular polarization at Fe L edge”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL034, unpublished.
[n] P. M. Lapostolle, “Possible Emittance Increase through Fillamentation due to Space Charge in Continuous Beams”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1101-1105.
[n] W. Lin, J. A. Crittenden, G. H. Hoffstaetter, Y. C. Jing, M. A. Sampson, and K. Shih, “Simulation Studies and Machine Learning Applications at the Coherent electron Cooling experiment at RHIC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2387-2390. doi:10.18429/JACoW-IPAC2022-WEPOMS057
[n] K. Nakajima et al., “A Proof of Principle Experiment of Laser Wakefield Accelerator”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-14, pp. 332-334.
[n] C. Tsoi-A-Sue, K. Lauer, R. Tang-Kong, and Z. Lentz, “Automated test execution framework for experiment control systems at LCLS”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper TUPD064, unpublished.
[n] S. Atencio et al., “Design, Analysis, and Fabrication of the APT Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP127, pp. 965-967.
[n] D. Koser, K. K??mpel, H. Podlech, P. Gerhard, and O. K. Kester, “Initial Measurements on a New 108 MHz 4-Rod CW RFQ Prototype for the HLI at GSI”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 946-948. doi:10.18429/JACoW-IPAC2018-TUPAF089
[n] A. Sakumi, Y. Muroya, T. Ueda, and M. Uesaka, “Commissioning a Cartridge-Type Photocathode RF Gun System at University of Tokyo”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN033, pp. 2787-2789.
[n] S. U. De Silva and J. R. Delayen, “Higher Order Mode Properties of Superconducting Parallel-Bar Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC084, pp. 3075-3077.
[n] P. S. Dester, L. Liu, and F. H. de S?â, “Energy Acceptance and on Momentum Aperture Optimization for the Sirius Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3041-3044. doi:10.18429/JACoW-IPAC2017-WEPIK052
[n] F. Li et al., “The status of beam instrument at CSNS”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG48, unpublished.
[n] K. Tsumaki, K. Fukami, K. Kajimoto, N. Kumagai, H. Yonehara, and T. Shimada, “Leakage Field Measurements of DC Septum Magnets for the SPring-8 Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE025, pp. 766-768.
[n] J. W. Glenn, K. A. Brown, N. Tsoupas, and V. M. Biryukov, “Continuous Extracted Beam in the AGS Fast External Beam Line”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH134, pp. 1526-1528.
[n] R. L. Kustom, G. Mavrogenes, and G. Nicholls, “The RF System of the Synchrotron X-Ray Source at Argonne”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1910-1913.
[n] H. Li, C. F. He, X. L. Wang, W. M. Yue, and W. Q. Zhang, “Dedicate SRF Cryomodule Test Facilities for S3FEL”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 298-301. doi:10.18429/JACoW-SRF2023-MOPMB080
[n] S. Dong, G. Feng, B. Li, X. Wang, and B. Zhang, “Design of a permanent quadrupole magnet with adjustable magnetic field gradient”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 226-228. doi:10.18429/JACoW-IPAC2023-MOPA082
[n] X. Xu et al., “Study on high energy coupling efficiency of laser-electron interaction via vortex beam”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 431-434. doi:10.18429/JACoW-IPAC2024-MOPG72
[n] V. V. Kapin, A. Ye. Bolshakov, and P. R. Zenkevich, “INFLUENCE OF BEAM SPACE CHARGE ON DYNAMICAL APERTURE OF TWAC STORAGE RING”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper FRCAU03, pp. XX-XX.
[n] A. Denker, J. Bundesmann, A. Dittwald, and G. Kourkafas, “Upgrade plans and new target stations for the HZB cyclotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5169-5172. doi:10.18429/JACoW-IPAC2023-THPM129
[n] C. Tennant et al., “Superconducting Radio-Frequency Cavity Fault Classification Using Machine Learning at Jefferson Laboratory”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4535-4539. doi:10.18429/JACoW-IPAC2021-FRXC01
[n] I. Koop, “Polarization Issues and Schemes for Energy Calibration”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT2A2, pp. 91-94.
[n] T. Noakes, G. Bell, C. Benjamin, H. Churn, and L. Jones, “An upgraded multiprobe surface analysis tool for photocathode research and development”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1205-1207. doi:10.18429/JACoW-IPAC2025-TUPM020
[n] Y. Xiao, “Ultrafast free-electron laser generation with optical beat note”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB092, unpublished.
[n] Kleines H., Baldauf R., Kravtsov P., Mikirtytchiants M., Nekipelov M., Rathmann F., Sarkadi J., Seyfarth H., Vassiliev A., Zwoll K., “The Slow Control System of the Atomic Beam Source at ANKE/COSY - An Industrial Approach Based on WinCC and S7 PLCs”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TA2O03, pp. XX-XX.
[n] M. Ikegami, A. Ueno, Y. Kondo, and T. Ohkawa, “A Simulation Study on Error Effects in J-PARC Linac”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP23, pp. 345-347.
[n] E. A. Savin, M. V. Lalayan, A. Yu. Smirnov, and A. A. Zavadtsev, “Development of the Software for the Accelerating Fields in Linear Structures Measurement”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC38, pp. 407-409.
[n] S. Fenster, G. Bart, and H. Takeda, “Multiturn Injection”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2574-2577.
[n] K. Fan et al., “Phase-space reconstruction based on severe undersampling for ultrafast electron beam”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5183-5186. doi:10.18429/JACoW-IPAC2023-THPM136
[n] J. Tanabe, P. Vander Arend, and R. Yamamoto, “The Doublet III Neutral Beam Source Cryopanel System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4080-4083.
[n] Y. R. Lu et al., “Upgrade of 1-MeV Heavy Ion ISR RFQ Accelerator”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP043, pp. 139-141.
[n] C. H. Chang et al., “Conceptual Design for the SRRC Elliptically Polarizing Undulator EPU5.6. - Part I: Magnetic Configuration and Merit Function Optimization”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP124G, pp. 2567-2569.
[n] J. Zhang, M. Chang, Q. Zhan, and X. Liu, “Conceptual Design for the Combined Damping and Accumulator Rings for Positrons at STCF”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1619, unpublished.
[n] J. B?ñhr, D. Lipka, and H. L??decke Deutsches Elektronen-Synchrotron, “Optical Transmission Line For Streak Camera Measurements at Pitz”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM05, pp. XX-XX.
[n] M. Popovic, A. Dudas, R. P. Johnson, A. Moretti, M. L. Neubauer, and R. Sah, “Phase and Frequency Locked Magnetrons for SRF Sources”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB058, pp. 4005-4007.
[n] H. Guerin et al., “Towards a beam dump design for the HL-LHC: Analysis of Run 3 dumps and energy deposition studies on the HL-LHC TDE assembly”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4108, unpublished.
[n] Y. Kobayashi, T. Mitsuhashi, and A. Ueda, “Injection Performance with a Traveling Wave Kicker Magnet System at the Photon Factory Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG013, pp. 3204-3206.
[n] P. A. P. Nghiem et al., “The IFMIF-EVEDA Challenges and their Treatment”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1B03, pp. 309-313.
[n] A. Sakumi et al., “Synchronizaiton Between Laser and Electron Beam at Photocathode RF Gun”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE049, pp. 3079-3081.
[n] M. Heilmann et al., “Scaled Alvarez-Cavity Model Investigations for the UNILAC Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 916-919. doi:10.18429/JACoW-IPAC2018-TUPAF079
[n] K. Harada et al., “DQBA Lattice Option for the KEK-LS Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2675-2677. doi:10.18429/JACoW-IPAC2017-WEPAB043
[n] A. G. Golovkina, I. V. Kudinovich, D. A. Ovsyannikov, and Y. A. Svistunov, “Dynamics of Processes in Subcritical Reactor Driven by Linear Accelerator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper FRCB02, pp. 467-469.
[n] D. Schoerling, M. Liebsch, P. Schwarz, and V. Ferrentino, “Conceptual electromagnetic design of a Magnetised Hadron Stopper for the BDF/SHiP experiment at CERN”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7060, unpublished.
[n] C. Compton et al., “Construction of a 161 MHz, =0.16 Superconducting Quarter Wave Resonator with Steering Correction for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP13, pp. 626-626.
[n] J. W. Dawson, A. Moretti, and J. J. Peerson, “Long-Pulse Radio Frequency Separator Test Facility”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 531-533.
[n] D. A. Ovsyannikov, “Mathematical Methods of Optimization of Charged Particle Beams Dynamics”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP053G, pp. 1382-1384.
[n] G. Wang, A. V. Fedotov, and D. Kayran, “Influences of the Longitudinal Shift of the Electron Bunch to the Longitudinal Cooling Rate”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 46-48. doi:10.18429/JACoW-COOL2023-THPOSRP01
[n] S. Adam and J. C. Collins, “Automatic Centering and Matching of Cyclotron Beams”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-15, pp. 2362-2365.
[n] J. W. B?ñhr et al., “Recent Upgrade of the PITZ Facility”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM103, pp. 459-463.
[n] W. T. Milner et al., “Transport of DC and Bunched Beams Through a 25 mV Folded Tandem Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1697-1702.
[n] D. Zhou et al., “Vertical Test System for Superconducting RF Cavities at Peking University”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 631-634. doi:10.18429/JACoW-SRF2017-TUPB099
[n] A. Ganesh, A. Bellelli, M. Bonora-Tam, M. Buzio, and C. Petrone, “Absolute pulsed-mode, long-duration integral field instrumentation using a multi-sensor approach”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7069, unpublished.
[n] N. N. Chau and A. Jejcic, “Some Improvements of Closed Orbit Correction Methods Application to D.C.I.”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1866-1870.
[n] M. Rahman, K. Iftekharuddin, A. Carpenter, and C. Tennant, “SRF cavity fault prediction using deep learning at Jefferson Lab”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1831-1834. doi:10.18429/JACoW-IPAC2024-TUPS68
[n] J. Swierblewski and D. Bocian, “Status of the cryomodule tests as a part of Polish in-kind contribution to the European Spallation Source (ESS) realized by IFJ PAN”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOP76, unpublished.
[n] A. Ratti et al., “Conceptual Design of the SNS RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4090, pp. 276-278.
[n] M.-Y. Park, Y.-S. Cho, H.-S. Kim, H.-J. Kwon, K. T. Seol, and Y. G. Song, “Tuning of 20MeV PEFP DTL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT018, pp. 1598-1600.
[n] E. Gluskin and E. R. Moog, “Recent Advances in Insertion Devices”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE06, pp. 1301-1304.
[n] A. A. Baldin et al., “Nondestructive Diagnostics of Accelerated Ion Beams With MCP-Based Detectors at the Accelerator Complex NICA. Experimental Results and Prospects”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 82-84. doi:10.18429/JACoW-RuPAC2021-WED05
[n] D. Lipka, M. Holz, and S. Vilcins, “Production of Cavity Beam Position Monitors for the ARES Accelerator at DESY”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 47-50. doi:10.18429/JACoW-IBIC2022-MOP12
[n] L. Carmichael, M. Austin, S. Johnson, and S. G. Wang, “Redesign of the Timeline Generator at Fermilab using a web-based Flutter application, GraphQL API and an IOC”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1786-1789. doi:10.18429/JACoW-ICALEPCS2025-THPD083
[n] Y. L. Qian and M. White, “Positron Focusing in the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA08, pp. 1067-1069.
[n] E. Adli et al., “Progress of the ESS Proton Beam Imaging Systems”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 394-397. doi:10.18429/JACoW-LINAC2022-TUPOJO20
[n] A. Patriarca, L. De Marzi, V. Favaudon, and S. J. Meyroneinc, “FLASH Radiation Therapy: Accelerator Aspects”, in Proc. IPAC'20, Caen, France, May 2020, pp. 71. doi:10.18429/JACoW-IPAC2020-THVIR12
[n] L. C. Teng, “Approximate Physical Treatment of the Beam-Beam Effects”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2402-2405.
[n] M. Dehn et al., “Various Improvements to Operate the 1.5 GeV HDSM at MAMI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD095, pp. 927-929.
[n] C. A. Mussolini et al., “Physics Beyond Colliders: The Conventional Beams Working Group”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1745-1748. doi:10.18429/JACoW-IPAC2022-WEPOST024
[n] S. T. Melnychuk and R. Meilunas, “Development of a Thin Film 9.17 MeV Gamma Ray Production Target for the Contraband Detection System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP152, pp. 2599-2601.
[n] J. Wu, X. Li, and Y. Liu, “Simulation study of an adaptive feedforward control for CSNS RCS LLRF system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3986-3988. doi:10.18429/JACoW-IPAC2023-THPA021
[n] A. K. Orduz, M. Di Giacomo, J.-M. Lagniel, G. Normand, and D. U. Uriot, “SPIRAL2 Commissioning and Operations”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 106-111. doi:10.18429/JACoW-HB2023-TUA3I1
[n] F.-T. Chung et al., “Development of a quality test platform for solid-state power amplifiers in NSRRC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3707-3709. doi:10.18429/JACoW-IPAC2024-THPR84
[n] L. Sarchiapone, A. Ferrari, E. Gschwendtner, and M. Lorenzo Sentis, “Expected Signal for the TBID and the Ionization Chambers Downstream of the CNGS Target Station”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH084, pp. 1208-1210.
[n] S. K. Esin, L. V. Kravchuk, A. I. Kvasha, and V. L. Serov, “Moscow Meson Factory DTL RF System Upgrade”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR25, pp. 1175-1177.
[n] Z. Shao, T. Zhang, Z. Dong, S. Dong, L. Wang, and Y. Lu, “Research on key technologies for resonance injection of a compact X-ray light source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3816-3818. doi:10.18429/JACoW-IPAC2024-THPS36
[n] S. A. Cherenshchikov, G. M. Ivanov, L. A. Makhnenko, and A. N. Opanasenko, “Secondary Emission Magnetron Injection Gun for Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA38, pp. 1976-1978.
[n] C. R. Ader, R. E. Reilly, and J. H. Wilson, “Mechanical Design of Ceramic Beam Tube Braze Joints for NOvA Kicker Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC043, pp. 4155-4157.
[n] P. P. Goryl et al., “Tango Controls RFCs”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 317-321. doi:10.18429/JACoW-ICALEPCS2021-TUBL03
[n] M. Clausen, “Industrial and Collaborative Control Systems - A Complementary Symbiosis”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH501, pp. XX-XX.
[n] A. Garren, I. Haber, and G. Krafft, “Focusing of Heavy Ion Beams on a Fusion Target”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2468-2471.
[n] V. Davidson and R. Johnson, “Present SLAC Accelerator Computer Control System Features”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2282-2285.
[n] Burkimsher P., Milcent H., “Applying Industrial Solutions to the Control of HEP Experiments”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TA2O04, pp. XX-XX.
[n] J. Ungrin, S. O. Schriber, and R. A. Vokes, “Post-Coupler and Stem Current Measurements for High Current cw Drift-Tube Linacs”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3013-3016.
[n] S. Liuzzo, L. Farvacque, N. Carmignani, and S. White, “Benchmark of AT vs MADX-PTC with exact integrators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 709-712. doi:10.18429/JACoW-IPAC2024-MOPS09
[n] A. C. de Lira, P. Bellomo, J. J. Lipari, and F. S. Rafael, “PEP-II Large Power Supplies Rebuild Program at SLAC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE066, pp. 3685-3687.
[n] W. Lawson, “Space-charge-limited Magnetron Injection Guns for Gyroklystrons”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF055, pp. 1072-1074.
[n] S. Macis et al., “The Sabina Terahertz/Infrared Beamline at SPARC-Lab Facility”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1525-1527. doi:10.18429/JACoW-IPAC2021-TUPAB069
[n] A. Grau et al., “Superconducting undulator mock-up coils with 18 mm period length – design and first cryogenic tests”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG63, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Madysa, S. Appel, L. Dingeldein, J. Fitzek, V. Kain, and M. Schenk, “Geoff developments in 2025”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1219-1223.
- N. Higashi, K. Harada, Y. Kobayashi, S. Nagahashi, N. Nakamura, and A. Ueda, “New HMBA Lattice for PF-AR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2684-2686.
- G. Arduini et al., “LEP Operation and Performance with 100 GeV Colliding Beams”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUOBF101, pp. 265-267.
- W. K. Lau et al., “Characterization and Tuning of a Microwave Gun Cavity”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT021, pp. 1748-1750.
- A. Smirnov, A. Sidorin, D. Krestnikov, R. Pivin, D. Prasuhn, and M. Wolke, “SIMULATION OF PELLET TARGET EXPERIMENTS WITH BETACOOL DODE”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH04, pp. XX-XX.
- I. L. Sheynman and A. Kanareykin, “Definition of Focusing System Parameters on the Basis of the Analysis of a Transverse Bunch Dynamics in Dielectric Loaded Wakefield Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD058, pp. 4416-4418.
- B. W. Allardyce, “A New Isotope Separator at the CERN Synchro-Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper N-04, pp. 752-755.
- J. A. Clarke, F. E. Hannon, and D. J. Scott, “The Initial Insertion Devices for the DIAMOND Light Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE028, pp. 2607-2609.
- G. Lopez, “Quench Simulations of the 40 mm Aperture SSC-Quadrupole Magnet Connected in Series with 50 mm Aperture SSC-Dipole Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2784-2787.
- J. W. Staples, H. D. Lancaster, and R. B. Yourd, “A Wideroe-Based Heavy Ion Preaccelerator for the SuperHILAC”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3739-3742.
- G. W. Kuswa, “Inertial Confinement Fusion Energy with Particle Beams”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 975-981.
- H. Thimmel and P. Wucherer, “Extraction from the Juelich 90 - Me V - d AEG-Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 474-479.
- F. Zhou, “LCLS-II photo-injector operational challenges and developments”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM051, unpublished.
- C. A. Méndez, T. Arias, M. Liepe, and N. Sitaraman, “Theoretical Study of Thin Noble-Metal Films on the Niobium Surface”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB053, pp. 230-233.
- H. Park, S. U. De Silva, and J. R. Delayen, “Measurement of Surface Resistance Properties with Coaxial Resonators - Review”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 374-380.
- M. F. Shea, R. J. Florian, R. W. Goodwin, A. J. Lennox, and D. M. Shea, “Control System for the Neutron Therapy Facility at Fermilab”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1660-1663.
- E. H. R. Gaxiola, G. Arduini, W. H?Âfle, F. Roncarolo, E. Vogel, and E. Vossenberg, “Performance of the CERN SPS Fast Extraction for the CNGS Facility”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT022, pp. 1757-1759.
- I. L. Azhgirey et al., “Benchmarking of the Radiation Environment Simulations for CMS Experiment at LHC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2235-2238.
- J. T. Maniscalco et al., “LCLS-II-HE Cavity Qualification Testing”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB072, pp. 279-281.
- P. Hermes, “Demonstrating the feasibility of a double-crystal fixed-target experimental physics setup through the TWOCRYST project in the LHC”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS018, pp. 627-630.
- H. Akiyama, K. Hiramoto, and H. Kubo, “Development of Magnet Power Supply System for Fast Pattern Excitation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A04, pp. 2196-2198.
- H.-W. Luo, M.-S. Chiu, P. J. Chou, N.-Y. Huang, and F.-H. Tseng, “Design of a new booster to storage ring transfer line for nonlinear kicker injection scheme in Taiwan Photon Source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2685, this conference.
- I. Drebot et al., “Modelling of the HB2TF injector in COMSOL with benchmarking using Astra and RF-track”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5081, this conference.
- C. Spezzani et al., “Coherent free-electron laser light with circular polarization at Fe L edge”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL034, unpublished.
- P. M. Lapostolle, “Possible Emittance Increase through Fillamentation due to Space Charge in Continuous Beams”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1101-1105.
- W. Lin, J. A. Crittenden, G. H. Hoffstaetter, Y. C. Jing, M. A. Sampson, and K. Shih, “Simulation Studies and Machine Learning Applications at the Coherent electron Cooling experiment at RHIC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2387-2390.
- K. Nakajima et al., “A Proof of Principle Experiment of Laser Wakefield Accelerator”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-14, pp. 332-334.
- C. Tsoi-A-Sue, K. Lauer, R. Tang-Kong, and Z. Lentz, “Automated test execution framework for experiment control systems at LCLS”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper TUPD064, unpublished.
- S. Atencio et al., “Design, Analysis, and Fabrication of the APT Cavities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP127, pp. 965-967.
- D. Koser, K. K??mpel, H. Podlech, P. Gerhard, and O. K. Kester, “Initial Measurements on a New 108 MHz 4-Rod CW RFQ Prototype for the HLI at GSI”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 946-948.
- A. Sakumi, Y. Muroya, T. Ueda, and M. Uesaka, “Commissioning a Cartridge-Type Photocathode RF Gun System at University of Tokyo”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN033, pp. 2787-2789.
- S. U. De Silva and J. R. Delayen, “Higher Order Mode Properties of Superconducting Parallel-Bar Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC084, pp. 3075-3077.
- P. S. Dester, L. Liu, and F. H. de S?â, “Energy Acceptance and on Momentum Aperture Optimization for the Sirius Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3041-3044.
- F. Li et al., “The status of beam instrument at CSNS”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG48, unpublished.
- K. Tsumaki, K. Fukami, K. Kajimoto, N. Kumagai, H. Yonehara, and T. Shimada, “Leakage Field Measurements of DC Septum Magnets for the SPring-8 Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE025, pp. 766-768.
- J. W. Glenn, K. A. Brown, N. Tsoupas, and V. M. Biryukov, “Continuous Extracted Beam in the AGS Fast External Beam Line”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH134, pp. 1526-1528.
- R. L. Kustom, G. Mavrogenes, and G. Nicholls, “The RF System of the Synchrotron X-Ray Source at Argonne”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1910-1913.
- H. Li, C. F. He, X. L. Wang, W. M. Yue, and W. Q. Zhang, “Dedicate SRF Cryomodule Test Facilities for S3FEL”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB080, pp. 298-301.
- S. Dong, G. Feng, B. Li, X. Wang, and B. Zhang, “Design of a permanent quadrupole magnet with adjustable magnetic field gradient”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA082, pp. 226-228.
- X. Xu et al., “Study on high energy coupling efficiency of laser-electron interaction via vortex beam”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG72, pp. 431-434.
- V. V. Kapin, A. Ye. Bolshakov, and P. R. Zenkevich, “INFLUENCE OF BEAM SPACE CHARGE ON DYNAMICAL APERTURE OF TWAC STORAGE RING”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper FRCAU03, pp. XX-XX.
- A. Denker, J. Bundesmann, A. Dittwald, and G. Kourkafas, “Upgrade plans and new target stations for the HZB cyclotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM129, pp. 5169-5172.
- C. Tennant et al., “Superconducting Radio-Frequency Cavity Fault Classification Using Machine Learning at Jefferson Laboratory”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4535-4539.
- I. Koop, “Polarization Issues and Schemes for Energy Calibration”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper FRT2A2, pp. 91-94.
- T. Noakes, G. Bell, C. Benjamin, H. Churn, and L. Jones, “An upgraded multiprobe surface analysis tool for photocathode research and development”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM020, pp. 1205-1207.
- Y. Xiao, “Ultrafast free-electron laser generation with optical beat note”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB092, unpublished.
- Kleines H., Baldauf R., Kravtsov P., Mikirtytchiants M., Nekipelov M., Rathmann F., Sarkadi J., Seyfarth H., Vassiliev A., Zwoll K., “The Slow Control System of the Atomic Beam Source at ANKE/COSY - An Industrial Approach Based on WinCC and S7 PLCs”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TA2O03, pp. XX-XX.
- M. Ikegami, A. Ueno, Y. Kondo, and T. Ohkawa, “A Simulation Study on Error Effects in J-PARC Linac”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP23, pp. 345-347.
- E. A. Savin, M. V. Lalayan, A. Yu. Smirnov, and A. A. Zavadtsev, “Development of the Software for the Accelerating Fields in Linear Structures Measurement”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC38, pp. 407-409.
- S. Fenster, G. Bart, and H. Takeda, “Multiturn Injection”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2574-2577.
- K. Fan et al., “Phase-space reconstruction based on severe undersampling for ultrafast electron beam”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM136, pp. 5183-5186.
- J. Tanabe, P. Vander Arend, and R. Yamamoto, “The Doublet III Neutral Beam Source Cryopanel System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4080-4083.
- Y. R. Lu et al., “Upgrade of 1-MeV Heavy Ion ISR RFQ Accelerator”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP043, pp. 139-141.
- C. H. Chang et al., “Conceptual Design for the SRRC Elliptically Polarizing Undulator EPU5.6. - Part I: Magnetic Configuration and Merit Function Optimization”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP124G, pp. 2567-2569.
- J. Zhang, M. Chang, Q. Zhan, and X. Liu, “Conceptual Design for the Combined Damping and Accumulator Rings for Positrons at STCF”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1619, this conference.
- J. B?ñhr, D. Lipka, and H. L??decke Deutsches Elektronen-Synchrotron, “Optical Transmission Line For Streak Camera Measurements at Pitz”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM05, pp. XX-XX.
- M. Popovic, A. Dudas, R. P. Johnson, A. Moretti, M. L. Neubauer, and R. Sah, “Phase and Frequency Locked Magnetrons for SRF Sources”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB058, pp. 4005-4007.
- H. Guerin et al., “Towards a beam dump design for the HL-LHC: Analysis of Run 3 dumps and energy deposition studies on the HL-LHC TDE assembly”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4108, this conference.
- Y. Kobayashi, T. Mitsuhashi, and A. Ueda, “Injection Performance with a Traveling Wave Kicker Magnet System at the Photon Factory Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG013, pp. 3204-3206.
- P. A. P. Nghiem et al., “The IFMIF-EVEDA Challenges and their Treatment”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1B03, pp. 309-313.
- A. Sakumi et al., “Synchronizaiton Between Laser and Electron Beam at Photocathode RF Gun”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE049, pp. 3079-3081.
- M. Heilmann et al., “Scaled Alvarez-Cavity Model Investigations for the UNILAC Upgrade”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 916-919.
- K. Harada et al., “DQBA Lattice Option for the KEK-LS Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2675-2677.
- A. G. Golovkina, I. V. Kudinovich, D. A. Ovsyannikov, and Y. A. Svistunov, “Dynamics of Processes in Subcritical Reactor Driven by Linear Accelerator”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper FRCB02, pp. 467-469.
- D. Schoerling, M. Liebsch, P. Schwarz, and V. Ferrentino, “Conceptual electromagnetic design of a Magnetised Hadron Stopper for the BDF/SHiP experiment at CERN”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7060, this conference.
- C. Compton et al., “Construction of a 161 MHz, =0.16 Superconducting Quarter Wave Resonator with Steering Correction for RIA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP13, pp. 626-626.
- J. W. Dawson, A. Moretti, and J. J. Peerson, “Long-Pulse Radio Frequency Separator Test Facility”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 531-533.
- D. A. Ovsyannikov, “Mathematical Methods of Optimization of Charged Particle Beams Dynamics”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP053G, pp. 1382-1384.
- G. Wang, A. V. Fedotov, and D. Kayran, “Influences of the Longitudinal Shift of the Electron Bunch to the Longitudinal Cooling Rate”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPOSRP01, pp. 46-48.
- S. Adam and J. C. Collins, “Automatic Centering and Matching of Cyclotron Beams”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-15, pp. 2362-2365.
- J. W. B?ñhr et al., “Recent Upgrade of the PITZ Facility”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM103, pp. 459-463.
- W. T. Milner et al., “Transport of DC and Bunched Beams Through a 25 mV Folded Tandem Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1697-1702.
- D. Zhou et al., “Vertical Test System for Superconducting RF Cavities at Peking University”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 631-634.
- A. Ganesh, A. Bellelli, M. Bonora-Tam, M. Buzio, and C. Petrone, “Absolute pulsed-mode, long-duration integral field instrumentation using a multi-sensor approach”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7069, this conference.
- N. N. Chau and A. Jejcic, “Some Improvements of Closed Orbit Correction Methods Application to D.C.I.”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1866-1870.
- M. Rahman, K. Iftekharuddin, A. Carpenter, and C. Tennant, “SRF cavity fault prediction using deep learning at Jefferson Lab”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS68, pp. 1831-1834.
- J. Swierblewski and D. Bocian, “Status of the cryomodule tests as a part of Polish in-kind contribution to the European Spallation Source (ESS) realized by IFJ PAN”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP76, unpublished.
- A. Ratti et al., “Conceptual Design of the SNS RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4090, pp. 276-278.
- M.-Y. Park, Y.-S. Cho, H.-S. Kim, H.-J. Kwon, K. T. Seol, and Y. G. Song, “Tuning of 20MeV PEFP DTL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT018, pp. 1598-1600.
- E. Gluskin and E. R. Moog, “Recent Advances in Insertion Devices”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE06, pp. 1301-1304.
- A. A. Baldin et al., “Nondestructive Diagnostics of Accelerated Ion Beams With MCP-Based Detectors at the Accelerator Complex NICA. Experimental Results and Prospects”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 82-84.
- D. Lipka, M. Holz, and S. Vilcins, “Production of Cavity Beam Position Monitors for the ARES Accelerator at DESY”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 47-50.
- L. Carmichael, M. Austin, S. Johnson, and S. G. Wang, “Redesign of the Timeline Generator at Fermilab using a web-based Flutter application, GraphQL API and an IOC”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1786-1789.
- Y. L. Qian and M. White, “Positron Focusing in the Advanced Photon Source (APS) Linear Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA08, pp. 1067-1069.
- E. Adli et al., “Progress of the ESS Proton Beam Imaging Systems”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 394-397.
- A. Patriarca, L. De Marzi, V. Favaudon, and S. J. Meyroneinc, “FLASH Radiation Therapy: Accelerator Aspects”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 71.
- L. C. Teng, “Approximate Physical Treatment of the Beam-Beam Effects”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2402-2405.
- M. Dehn et al., “Various Improvements to Operate the 1.5 GeV HDSM at MAMI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD095, pp. 927-929.
- C. A. Mussolini et al., “Physics Beyond Colliders: The Conventional Beams Working Group”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1745-1748.
- S. T. Melnychuk and R. Meilunas, “Development of a Thin Film 9.17 MeV Gamma Ray Production Target for the Contraband Detection System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP152, pp. 2599-2601.
- J. Wu, X. Li, and Y. Liu, “Simulation study of an adaptive feedforward control for CSNS RCS LLRF system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA021, pp. 3986-3988.
- A. K. Orduz, M. Di Giacomo, J.-M. Lagniel, G. Normand, and D. U. Uriot, “SPIRAL2 Commissioning and Operations”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA3I1, pp. 106-111.
- F.-T. Chung et al., “Development of a quality test platform for solid-state power amplifiers in NSRRC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR84, pp. 3707-3709.
- L. Sarchiapone, A. Ferrari, E. Gschwendtner, and M. Lorenzo Sentis, “Expected Signal for the TBID and the Ionization Chambers Downstream of the CNGS Target Station”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH084, pp. 1208-1210.
- S. K. Esin, L. V. Kravchuk, A. I. Kvasha, and V. L. Serov, “Moscow Meson Factory DTL RF System Upgrade”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR25, pp. 1175-1177.
- Z. Shao, T. Zhang, Z. Dong, S. Dong, L. Wang, and Y. Lu, “Research on key technologies for resonance injection of a compact X-ray light source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS36, pp. 3816-3818.
- S. A. Cherenshchikov, G. M. Ivanov, L. A. Makhnenko, and A. N. Opanasenko, “Secondary Emission Magnetron Injection Gun for Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA38, pp. 1976-1978.
- C. R. Ader, R. E. Reilly, and J. H. Wilson, “Mechanical Design of Ceramic Beam Tube Braze Joints for NOvA Kicker Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC043, pp. 4155-4157.
- P. P. Goryl et al., “Tango Controls RFCs”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 317-321.
- M. Clausen, “Industrial and Collaborative Control Systems - A Complementary Symbiosis”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH501, pp. XX-XX.
- A. Garren, I. Haber, and G. Krafft, “Focusing of Heavy Ion Beams on a Fusion Target”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2468-2471.
- V. Davidson and R. Johnson, “Present SLAC Accelerator Computer Control System Features”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2282-2285.
- Burkimsher P., Milcent H., “Applying Industrial Solutions to the Control of HEP Experiments”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TA2O04, pp. XX-XX.
- J. Ungrin, S. O. Schriber, and R. A. Vokes, “Post-Coupler and Stem Current Measurements for High Current cw Drift-Tube Linacs”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3013-3016.
- S. Liuzzo, L. Farvacque, N. Carmignani, and S. White, “Benchmark of AT vs MADX-PTC with exact integrators”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS09, pp. 709-712.
- A. C. de Lira, P. Bellomo, J. J. Lipari, and F. S. Rafael, “PEP-II Large Power Supplies Rebuild Program at SLAC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE066, pp. 3685-3687.
- W. Lawson, “Space-charge-limited Magnetron Injection Guns for Gyroklystrons”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF055, pp. 1072-1074.
- S. Macis et al., “The Sabina Terahertz/Infrared Beamline at SPARC-Lab Facility”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1525-1527.
- A. Grau et al., “Superconducting undulator mock-up coils with 18 mm period length – design and first cryogenic tests”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG63, unpublished.
Back to search