Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Calvi et al., “Summary of the U15 Prototype Magnetic Performance”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP041, pp. 111-115.
[n] W. H. Hwang, H. J. Park, D. T. Kim, H. S. Kang, J. Y. Huang and S, and H. Nam, “LONGITUDINAL FEEDBACK SYSTEM FOR PLS STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP020, pp. XX-XX.
[n] S. A. Belomestnykh et al., “Superconducting RF Linac for eRHIC”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB063, pp. 321-323.
[n] M. Switka and K. Desch, “Feasibility investigation of a low energy laser driven plasma injector for ELSA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1526-1528. doi:10.18429/JACoW-IPAC2023-TUPA088
[n] J.-L. Vay et al., “High-Performance Modeling of Plasma-Based Acceleration and Laser-Plasma Interactions.”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 758-761. doi:10.18429/JACoW-NAPAC2016-WEPOA30
[n] C. Leon, A. Scheinker, N. Yampolsky, and P. Anisimov, “Utilizing neural networks to speed up coherent synchrotron radiation computations”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 901-904. doi:10.18429/JACoW-IPAC2024-MOPS73
[n] K. R. Shin, M. S. Champion, Y. W. Kang, and A. E. Fathy, “Design and Measurement of Double Gap Buncher Cavity Proposed for Reduction of X- ray Radiation”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA23, pp. 1031-1033.
[n] L. Maunoury, J. Y. Pacquet, and C. Pierret, “ECRIS's Extraction: A New Way to Increase the Brightness of a Beam”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper THCO-C01, pp. 224-228.
[n] P. Lapostolle, “New Heavy Ion Accelerators”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 1957-1962.
[n] J. Chappell, D. A. Cooke, L. C. Deacon, S. Jolly, F. Keeble, and M. Wing, “Progress Towards a Single-Shot Emittance Measurement Technique at AWAKE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3742-3745. doi:10.18429/JACoW-IPAC2019-THPGW067
[n] J. Hiegel and E. Baussan, “ESSnuSB+: target station studies”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1095, unpublished.
[n] P. Snopok and J. D. Kunz, “Progress of the Matter-dominated Muon Accelerator Lattice Simulation Tools Development for COSY Infinity”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA10, pp. 192-194.
[n] V. V. Borisov et al., “Magnetic Measurement System for the NICA Booster Magnets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2696-2699. doi:10.18429/JACoW-IPAC2014-WEPRI088
[n] P. Boonpornprasert et al., “Experimental Optimization and Characterization of Electron Beams for Generating IR/THz SASE FEL Radiation with PITZ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2650-2653. doi:10.18429/JACoW-IPAC2017-WEPAB033
[n] Q. Luo, H. He, P. Li, P. Lu, B. Sun, and J. H. Wang, “Design of S-band Cavity BPM for HLS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN051, pp. 4102-4104.
[n] A. Lueangaramwong, J. Hares, I.P.S. Martin, and R. Fielder, “A Kick-and-Cancel injection scheme for Diamond-II”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3240-3243. doi:10.18429/JACoW-IPAC2024-THPG01
[n] G. G??nther et al., “FAIR Meets EMIL: Principles in Practice”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 574-580. doi:10.18429/JACoW-ICALEPCS2021-WEBL05
[n] B. G. Martlew, M. J. Pugh, and W. R. Rawlinson, “Plans for the DIAMOND Control System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP024L, pp. 1766-1768.
[n] W. Barth, A. Schempp, H. Deitinghoff, and J. Dehen, “Transport of Ions in RFQ-Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3142-3145.
[n] H. Singh, H. Witte, S. Notaro, and V. Teotia, “Extended Jiles-Atherton hysteresis model to accurately predict fields in a Rapid Cycling Synchrotron dipole magnet”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1510-1513. doi:10.18429/JACoW-IPAC2024-TUPR43
[n] H.-D. Nuhn et al., “Undulator Radiation Damage Experience at LCLS”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP046, pp. 127-130.
[n] S. Zhang, M. Poelker, M. L. Stutzman, X. Peng, and J. Zou, “Negative Electron Affinity Gallium Arsenide Photocathodes Based on Optically Resonant Nanostructure”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4575-4578. doi:10.18429/JACoW-IPAC2018-THPMK111
[n] J. Dinkel, B. Hanna, C. Jensen, D. Qunell, and R. Reilly, “Development of a High Quality Kicker Magnet System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1357-1360.
[n] A. V. Aleksandrov, “Optimal Design of a High Current MEBT with Chopper”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP074, pp. 3533-3535.
[n] C. Pellegrini, “Overview of Single Pass Free Electron Lasers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper FRYBPA01, pp. 3636-3640.
[n] S. D. Nelson, Y. J. Chen, T. Fessenden, and C. Holmes, “High current precision long pulse electron beam position monitor”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PT15, pp. XX-XX.
[n] J. C. Brunet, C. Hauviller, L. Leistam, A. Mathewson, C. Reymermier, and R. Veness, “Design Options for Vacuum Chambers in the LHC Experiments”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2485-2488.
[n] C. I. Chen, C. C. Chu, I. C. Hsu, and C. I. Yu, “The Observation of Electron Beam Size Variation by Utilizing the Nonlinearity of a Fast Photodiode”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP070L, pp. 1698-1700.
[n] A. Saw et al., “Laser-plasma electron injector for the cSTART storage ring”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3046, unpublished.
[n] S. W. Lee and Y. W. Kang, “RF and Thermo-Mechanical Considerations in Designing the Waveguide Iris Coupler for the Drift Tube Linac in the ORNL Spallation Neutron Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3796-3798. doi:10.18429/JACoW-IPAC2018-THPAL063
[n] K. Dunkel, M. Pekeler, C. Piel, H. P. Vogel, and P. vom Stein, “Custom Design of Medium Energy Linear Accelerator Systems”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF006, pp. 965-967.
[n] L. T. Perkins, C. M. Celata, K. N. Leung, D. S. Picard, R. Vilaithong, and M. D. Williams, “A Compact, RF-Driven, Pulsed Ion Source for Intense Neutron Generation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W027, pp. 2761-2763.
[n] M. E. Biagini et al., “New Low Emittance Lattices for the SuperB Accelerator Project”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP040, pp. 2608-2610.
[n] A. Opanasenko, “ALTERNATING WAKE FORCE IN RECTANGULAR WAVEGUIDE WITH PERIODIC PERTURBED WALLS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH12, pp. XX-XX.
[n] C. Z. Antoine et al., “Evidence of Preferential Diffusion and Segregation of Impurities at Grain Boundaries in very Pure Niobium used for Radiofrequency Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F20, pp. 647-647.
[n] J. Claus, “Particle Loss during Adiabatic Capture”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1075-1077.
[n] Y. D. Li, Y.-C. Chien, and K.-B. Liu, “TPS Digital Corrector Magnet Power Converter based on FPGA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO020, pp. 3382-3384.
[n] G. V. Sotnikov, K. V. Galaydych, and A. M. Naboka, “Nonlinear Theory of Wakefield Excitation in A Rectangular Multizone Dielectric Resonator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD061, pp. 4422-4424.
[n] E. P. Colton, A. Lombardi, D. Neuffer, G. Swain, and T.-S. Wang, “Transverse Collective Instability in the PSR”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1202-1205.
[n] N. P. Dikiy, A. N. Dovbnya, and V. I. Uvarov, “Development of New Electron Irradiation Based Technology for Technetium-99m Production”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP13C, pp. 2389-2394.
[n] V. Vlachodimitropoulos, M. J. Barnes, A. Chmielinska, L. Ducimeti?¿re, L. Vega Cid, and W. J. M. Weterings, “Studies Towards the New Beam Screen System of the LHC Injection Kicker Magnet for HL-LHC Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3982-3985. doi:10.18429/JACoW-IPAC2019-THPRB074
[n] A. Freyberger, “Large Dynamic Range Beam Profile Measurements”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB070, pp. 2565-2567.
[n] A. Deshpande, K. Anderson, and V. Sidorov, “Optimization of a welding procedure for making critical aluminum welds on the LBNF absorber core block”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1754-1757. doi:10.18429/JACoW-IPAC2024-TUPS43
[n] S. A. Gavrilov, P. I. Reinhardt-Nickoulin, and I. V. Vasilyev, “Electrostatic Pick-ups for Debunched Beams at INR Linac”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC43, pp. 420-422.
[n] A. M. Lombardi, O. S. Br??ning, S. D. Fartoukh, T. Risselada, F. Schmidt, and A. Verdier, “Dynamic Aperture Reduction from the Dodecapole Component in the LHC Main Quadrupoles and its Mechanism.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT026, pp. 1885-1887.
[n] J. Wu, Q. Qin, and Y. Zhang, “Diffusion Map Analysis in High Energy Storage Ring Based e?/e? Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 203-205. doi:10.18429/JACoW-IPAC2019-MOPGW051
[n] P. K. Saha, “Operational Experience with J-PARC Injection and Extraction Systems”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO2B01, pp. 324-328.
[n] M. Masuzawa, K. Egawa, T. Kawamoto, Y. Ohsawa, T. Sueno, and N. Tokuda, “Installation of Skew Sextupole Magnets at KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB009, pp. 1533-1535.
[n] M. Champion et al., “Progress towards the completion of the proton power upgrade project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1691-1694. doi:10.18429/JACoW-IPAC2024-TUPS27
[n] D. Van Winkle, J. D. Fox, and D. Teytelman, “In Depth Diagnostics for RF System Operation in the PEP-II B Factory”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT074, pp. 3931-3933.
[n] J. Geel and A. J. J. Franken, “RF System for a Compact Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 461-465.
[n] A. Mikhailichenko and T. Moore, “Simple Procedure for Superconducting Coil Winding”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH319, pp. 3645-3647.
[n] Nedeoglo F., Chepurnov A., Komissarov D., “Linux and RT-Linux for Accelerator Control - Pros and Cons, Application and Positive Experience”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P46, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Calvi et al., “Summary of the U15 Prototype Magnetic Performance”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP041, pp. 111-115.
- W. H. Hwang, H. J. Park, D. T. Kim, H. S. Kang, J. Y. Huang and S, and H. Nam, “LONGITUDINAL FEEDBACK SYSTEM FOR PLS STORAGE RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP020, pp. XX-XX.
- S. A. Belomestnykh et al., “Superconducting RF Linac for eRHIC”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB063, pp. 321-323.
- M. Switka and K. Desch, “Feasibility investigation of a low energy laser driven plasma injector for ELSA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA088, pp. 1526-1528.
- J.-L. Vay et al., “High-Performance Modeling of Plasma-Based Acceleration and Laser-Plasma Interactions.”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 758-761.
- C. Leon, A. Scheinker, N. Yampolsky, and P. Anisimov, “Utilizing neural networks to speed up coherent synchrotron radiation computations”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS73, pp. 901-904.
- K. R. Shin, M. S. Champion, Y. W. Kang, and A. E. Fathy, “Design and Measurement of Double Gap Buncher Cavity Proposed for Reduction of X- ray Radiation”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA23, pp. 1031-1033.
- L. Maunoury, J. Y. Pacquet, and C. Pierret, “ECRIS's Extraction: A New Way to Increase the Brightness of a Beam”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper THCO-C01, pp. 224-228.
- P. Lapostolle, “New Heavy Ion Accelerators”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 1957-1962.
- J. Chappell, D. A. Cooke, L. C. Deacon, S. Jolly, F. Keeble, and M. Wing, “Progress Towards a Single-Shot Emittance Measurement Technique at AWAKE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3742-3745.
- J. Hiegel and E. Baussan, “ESSnuSB+: target station studies”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1095, this conference.
- P. Snopok and J. D. Kunz, “Progress of the Matter-dominated Muon Accelerator Lattice Simulation Tools Development for COSY Infinity”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA10, pp. 192-194.
- V. V. Borisov et al., “Magnetic Measurement System for the NICA Booster Magnets”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2696-2699.
- P. Boonpornprasert et al., “Experimental Optimization and Characterization of Electron Beams for Generating IR/THz SASE FEL Radiation with PITZ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2650-2653.
- Q. Luo, H. He, P. Li, P. Lu, B. Sun, and J. H. Wang, “Design of S-band Cavity BPM for HLS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN051, pp. 4102-4104.
- A. Lueangaramwong, J. Hares, I.P.S. Martin, and R. Fielder, “A Kick-and-Cancel injection scheme for Diamond-II”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, pp. 3240-3243.
- G. G??nther et al., “FAIR Meets EMIL: Principles in Practice”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 574-580.
- B. G. Martlew, M. J. Pugh, and W. R. Rawlinson, “Plans for the DIAMOND Control System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP024L, pp. 1766-1768.
- W. Barth, A. Schempp, H. Deitinghoff, and J. Dehen, “Transport of Ions in RFQ-Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3142-3145.
- H. Singh, H. Witte, S. Notaro, and V. Teotia, “Extended Jiles-Atherton hysteresis model to accurately predict fields in a Rapid Cycling Synchrotron dipole magnet”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR43, pp. 1510-1513.
- H.-D. Nuhn et al., “Undulator Radiation Damage Experience at LCLS”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP046, pp. 127-130.
- S. Zhang, M. Poelker, M. L. Stutzman, X. Peng, and J. Zou, “Negative Electron Affinity Gallium Arsenide Photocathodes Based on Optically Resonant Nanostructure”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4575-4578.
- J. Dinkel, B. Hanna, C. Jensen, D. Qunell, and R. Reilly, “Development of a High Quality Kicker Magnet System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1357-1360.
- A. V. Aleksandrov, “Optimal Design of a High Current MEBT with Chopper”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP074, pp. 3533-3535.
- C. Pellegrini, “Overview of Single Pass Free Electron Lasers”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper FRYBPA01, pp. 3636-3640.
- S. D. Nelson, Y. J. Chen, T. Fessenden, and C. Holmes, “High current precision long pulse electron beam position monitor”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PT15, pp. XX-XX.
- J. C. Brunet, C. Hauviller, L. Leistam, A. Mathewson, C. Reymermier, and R. Veness, “Design Options for Vacuum Chambers in the LHC Experiments”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2485-2488.
- C. I. Chen, C. C. Chu, I. C. Hsu, and C. I. Yu, “The Observation of Electron Beam Size Variation by Utilizing the Nonlinearity of a Fast Photodiode”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP070L, pp. 1698-1700.
- A. Saw et al., “Laser-plasma electron injector for the cSTART storage ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3046, this conference.
- S. W. Lee and Y. W. Kang, “RF and Thermo-Mechanical Considerations in Designing the Waveguide Iris Coupler for the Drift Tube Linac in the ORNL Spallation Neutron Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3796-3798.
- K. Dunkel, M. Pekeler, C. Piel, H. P. Vogel, and P. vom Stein, “Custom Design of Medium Energy Linear Accelerator Systems”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF006, pp. 965-967.
- L. T. Perkins, C. M. Celata, K. N. Leung, D. S. Picard, R. Vilaithong, and M. D. Williams, “A Compact, RF-Driven, Pulsed Ion Source for Intense Neutron Generation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W027, pp. 2761-2763.
- M. E. Biagini et al., “New Low Emittance Lattices for the SuperB Accelerator Project”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP040, pp. 2608-2610.
- A. Opanasenko, “ALTERNATING WAKE FORCE IN RECTANGULAR WAVEGUIDE WITH PERIODIC PERTURBED WALLS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH12, pp. XX-XX.
- C. Z. Antoine et al., “Evidence of Preferential Diffusion and Segregation of Impurities at Grain Boundaries in very Pure Niobium used for Radiofrequency Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F20, pp. 647-647.
- J. Claus, “Particle Loss during Adiabatic Capture”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1075-1077.
- Y. D. Li, Y.-C. Chien, and K.-B. Liu, “TPS Digital Corrector Magnet Power Converter based on FPGA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO020, pp. 3382-3384.
- G. V. Sotnikov, K. V. Galaydych, and A. M. Naboka, “Nonlinear Theory of Wakefield Excitation in A Rectangular Multizone Dielectric Resonator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD061, pp. 4422-4424.
- E. P. Colton, A. Lombardi, D. Neuffer, G. Swain, and T.-S. Wang, “Transverse Collective Instability in the PSR”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1202-1205.
- N. P. Dikiy, A. N. Dovbnya, and V. I. Uvarov, “Development of New Electron Irradiation Based Technology for Technetium-99m Production”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP13C, pp. 2389-2394.
- V. Vlachodimitropoulos, M. J. Barnes, A. Chmielinska, L. Ducimeti?¿re, L. Vega Cid, and W. J. M. Weterings, “Studies Towards the New Beam Screen System of the LHC Injection Kicker Magnet for HL-LHC Operation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3982-3985.
- A. Freyberger, “Large Dynamic Range Beam Profile Measurements”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB070, pp. 2565-2567.
- A. Deshpande, K. Anderson, and V. Sidorov, “Optimization of a welding procedure for making critical aluminum welds on the LBNF absorber core block”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS43, pp. 1754-1757.
- S. A. Gavrilov, P. I. Reinhardt-Nickoulin, and I. V. Vasilyev, “Electrostatic Pick-ups for Debunched Beams at INR Linac”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC43, pp. 420-422.
- A. M. Lombardi, O. S. Br??ning, S. D. Fartoukh, T. Risselada, F. Schmidt, and A. Verdier, “Dynamic Aperture Reduction from the Dodecapole Component in the LHC Main Quadrupoles and its Mechanism.”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT026, pp. 1885-1887.
- J. Wu, Q. Qin, and Y. Zhang, “Diffusion Map Analysis in High Energy Storage Ring Based e?/e? Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 203-205.
- P. K. Saha, “Operational Experience with J-PARC Injection and Extraction Systems”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper TUO2B01, pp. 324-328.
- M. Masuzawa, K. Egawa, T. Kawamoto, Y. Ohsawa, T. Sueno, and N. Tokuda, “Installation of Skew Sextupole Magnets at KEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB009, pp. 1533-1535.
- M. Champion et al., “Progress towards the completion of the proton power upgrade project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS27, pp. 1691-1694.
- D. Van Winkle, J. D. Fox, and D. Teytelman, “In Depth Diagnostics for RF System Operation in the PEP-II B Factory”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT074, pp. 3931-3933.
- J. Geel and A. J. J. Franken, “RF System for a Compact Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 461-465.
- A. Mikhailichenko and T. Moore, “Simple Procedure for Superconducting Coil Winding”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH319, pp. 3645-3647.
- Nedeoglo F., Chepurnov A., Komissarov D., “Linux and RT-Linux for Accelerator Control - Pros and Cons, Application and Positive Experience”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1P46, pp. XX-XX.
Back to search