JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Lu, C. Feng, and D. Wang, “A novel scheme based on angular dispersion-induced microbunching mechanism for harmonic generation in storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1935-1938. doi:10.18429/JACoW-IPAC2023-TUPL089
[n]	R. Baer, M. Schwickert, and T. Fleck, “Status of the Control System for HICAT at an Advanced Stage of Commissioning: Functions, Restrictions and Experiences”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA02, pp. 47-49. 
[n]	Z. Y. Guo, C. E. Chen, J. X. Fang, Y. R. Lu, X. Q. Yan, and C. Zhang, “Design of a 200MHz Proton RFQ”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE102, pp. 903-905. 
[n]	M. Pande et al., “Performance evaluation and enhancement in kW level SSAs”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB010, unpublished. 
[n]	N. Iida et al., “Beam injection issues at SuperKEKB”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 832-835. doi:10.18429/JACoW-IPAC2023-MOPL120
[n]	I. V. Bazarov and H. Padamsee, “Multivariate Optimization of ILC Parameters”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP021, pp. 1736-1738. 
[n]	M. Ning, A. Bernhard, S. Fatehi, and A.-S. Mueller, “Design, fabrication and measurement of a normal conducting quadrupole for a laser-plasma-accelerator-based beam transport line”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3227-3229. doi:10.18429/JACoW-IPAC2023-WEPL050
[n]	J. Sun et al., “Commissioning of the S-band RF Transverse Deflecting Cavity at Dalian Coherent Light Source”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL009, unpublished. 
[n]	N. Neveu, B. Jacobson, J. Sikora, and J. Diaz Cruz, “Higher order mode detection as a beam offset monitor for LCLS-II”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEBN2, unpublished. 
[n]	C. Lin et al., “Acceleration and Transport of Protons in a PW Laser Accelerator”, presented at the SAP'23, Xichang, China, Jul. 2023, paper TUAA02, unpublished. 
[n]	R. L. Gluckstern, H. Okamoto, and W. Cheng, “Synchrobetatron Coupling Effects in Alternating Phase Focusing”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 221-224. 
[n]	C.-J. Jing et al., “Observation of Wakefields in a Beam-Driven Photonic Band Gap Accelerating Structure”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD066, pp. 4431-4433. 
[n]	T. Konomi et al., “Design of the Cathode Stalk for the LCLS-II-HE Low Emittance Injector”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 253-255. doi:10.18429/JACoW-NAPAC2022-MOPA87
[n]	J. Jamilkowski et al., “Electron Ion Collider project and control system updates for 2025”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 216-222. doi:10.18429/JACoW-ICALEPCS2025-TUAG001
[n]	S. Hartman et al., “Photocathode Driven Linac at UCLA for FEL and Plasma Wakefield Acceleration Experiments”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2967-2970. 
[n]	T. Shintake, “Status of Japanese XFEL Project and SCSS Test Accelerator”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOBAU05, pp. 33-36. 
[n]	G. V. Romanov et al., “CW Room Temperature Re-buncher for the Project X Front End”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP063, pp. 3880-3882. 
[n]	C. M. Bhat et al., “Recent Improvements in the Beam Capture at Fermilab Booster for High Intensity Operation”, in Proc. HB'21, Batavia, IL, USA, Oct. 2021, pp. 23-26. doi:10.18429/JACoW-HB2021-MOP02
[n]	M. Dutine et al., “Concept of a Beam Diagnostics System for the Multi-Turn ERL Operation at the S-DALINAC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 254-256. doi:10.18429/JACoW-IPAC2022-MOPOPT012
[n]	U. Iriso and T. F. G??nzel, “Analysis of Multi-Bunch Instabilities at Alba Using a Transverse Feedback System”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 154-157. doi:10.18429/JACoW-IBIC2021-MOPP44
[n]	G. Gaio et al., “A Framework for High Level Machine Automation Based on Behavior Tree”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 534-539. doi:10.18429/JACoW-ICALEPCS2021-WEAL02
[n]	M. Lau, M. Beyer, R. Heilig, D. Hollmann, M. Schweizer, and J. Weber, “Redundancy Concepts for Improved MTBF of RF Systems in Particle Accelerator Facilities”, presented at the HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, paper FR1C2, unpublished. 
[n]	S. Yokouchi, H. Daibo, Y. Lee, Y. Morimoto, and T. Nishidono, “Vacuum Performance Characteristics of 4 m-Long Vacuum Chamber with NEG Strip for SPring-8”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1332-1335. 
[n]	H. Danared et al., “New Projects at CRYRING”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP95, pp. 1698-1700. 
[n]	G. Chen et al., “Emittance Measurements and Simulations from an X-Band Short-Pulse Ultra-High Gradient Photoinjector”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 45-48. doi:10.18429/JACoW-NAPAC2022-MOZE3
[n]	L. Pocher, I. Haber, T. Antonsen, and P. O'Shea, “Optimizing the discovery of underlying nonlinear beam dynamics and moment evolution”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4503-4506. doi:10.18429/JACoW-IPAC2023-THPL036
[n]	S. Kovalov, I. Beznosenko, G. Sotnikov, and A. Vasyliev, “ELECTRON BEAM FORMATION IN A THERMIONIC ELECTRON GUN”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2150, unpublished. 
[n]	G. Y. Hsiung, K. M. Hsiao, T. F. Lin, R. Chen, Z. D. Tsai, and S. N. Hsu and J, “DEVELOPMENT OF THE PHOTON BEAM POSITION MONITORS FOR THE TLS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP015, pp. XX-XX. 
[n]	Z. N. Ou, R. Y. Liao, S. Tang, X. Wang, H. H. Yu, and L. Zhou, “Experimental Setup Design of Hard X-ray Coherent Scattering (HXCS) Beamline at HEPS”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper TUPYP040, unpublished. 
[n]	W. M. Fawley, G. Penn, and A. Zholents, “Output Bandwidth Effects in Seeded, Harmonic Cascade FELs”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THAAU01, pp. XX-XX. 
[n]	C. Adolphsen, Z. Li, K. Ko, R. H. Miller, K. L. F. Bane, and V. Dolgashev, “Higher Dipole Bands in the NLC Accelerating Structure”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA18, pp. 422-424. 
[n]	B. Bian et al., “Design and experimental research of UHV flanges for the Hefei Advanced Light Facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4331-4333. doi:10.18429/JACoW-IPAC2023-THPA158
[n]	L. Antoniazzi, A. Conte, C. Roncolato, D. Bortolato, F. Gelain, and G. Savarese, “Commissioning and operation of vacuum control system for SPES project”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1052-1056. doi:10.18429/JACoW-ICALEPCS2025-WEPD007
[n]	M. Horana Gamage et al., “Highly charged Mg ion production using laser ablation ion source at Brookhaven National Laboratory”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 598-601. doi:10.18429/JACoW-IPAC2024-MOPR69
[n]	M. Bueno, S. Fiedler, L. Kolwicz-Chodak, J. Meyer, and U. Ristau, “Cryogenics Monitoring and Control System for EMBL Facilities at PETRA III”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 167. doi:10.18429/JACoW-MEDSI2020-TUPB11
[n]	T. Persson et al., “LHC optics commissioning in 2023 and 2024”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 67-70. doi:10.18429/JACoW-IPAC2024-MOPC12
[n]	V. Andreev, R. C. York, X. Wu, and M. Doleans, “Beam Distribution System for the MSU-RIA Driver Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP031, pp. 106-108. 
[n]	J.E.Chen, J.X.Fang, K.Zhao, “PROGRESS OF RFQ AND SUPERCONDUCTING ACCELERATORS AT PEKING UNIVERSITY”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper MOC03, pp. XX-XX. 
[n]	K. Manukyan, “Numerical investigation of beam loss scenarios and top-up safety for Elettra 2.0”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC30, unpublished. 
[n]	M. Liepe et al., “First Tests of the Cornell University ERL Injector”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper WE104, pp. 699-703. 
[n]	N. A. Stilin, A. T. Holic, M. Liepe, R. D. Porter, J. Sears, and Z. Sun, “Conduction Cooling Methods for Nb?Sn SRF Cavities and Cryomodules”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1192-1195. doi:10.18429/JACoW-IPAC2021-MOPAB391
[n]	C. J. Glasman, R. M. Jones, I. Shinton, and G. Burt, “Simulations of transverse higher order deflecting modes in the main linacs of  ILC”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP80, pp. XX-XX. 
[n]	P. Forck and A. Peters, “Non-Interfering Beam Diagnostic Developments”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MO203, pp. 13-17. 
[n]	T. Yang, “Modularized SiC MOSFET-based accelerator-grade pulsed power supply design”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOP12, unpublished. 
[n]	K. Hazelwood et al., “1 MW Beam Power in the Fermilab Main Injector”, presented at the IPAC'26, Deauville, France, May 2026, paper WEV4303, unpublished. 
[n]	G. Reinhold and R. Gleyvod, “Twin-Tank Accelerator for High-Voltage Electron Microscopy (HVEM)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 378-383. 
[n]	K. Peetermans, M. Krasilnikov, F. Lemery, and X. Li, “Optimizing Cherenkov waveguide seeding for THz SASE FELs towards stable, few-cycle pulses”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 250-253. doi:10.18429/JACoW-IPAC2025-MOPB106
[n]	R. Geller, “Invited Paper: Multiply Charged ECR Ion Sources for Particle Accelerators”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper M-01, pp. 699-706. 
[n]	S. Fujishima et al., “Numerical Analyses of the Injection and Extraction Trajectories for the RIKEN Superconducting Ring Cyclotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W030, pp. 1066-1068. 
[n]	S. Jummunt et al., “Design and development of a beam scraper system for Siam Photon Source II”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2856-2858. doi:10.18429/JACoW-IPAC2025-THPM085
[n]	K. Okihira et al., “Result of MHI 2-Cell Seamless Dumb-Bell Cavity Vertical Test”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP100, pp. 1087-1089. 
[n]	R. T. Fielder, A. Lueangaramwong, and A. F. D. Morgan, “Development of a Pulsed Injection Stripline for Diamond-II”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 38-41. doi:10.18429/JACoW-FLS2023-MO4B3
[n]	W. Shields et al., “Progress & developments of beam delivery simulation (BDSIM)”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2325-2328. doi:10.18429/JACoW-IPAC2025-WEPS039
[n]	V. Dolgashev, A. Brachmann, E. Williams, E. Kraft, K. Ratcliffe, and M. Kosovsky, “LCLS-II longitudinal beam diagnostics based on a short S-band deflector”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 775-777. doi:10.18429/JACoW-LINAC2024-THPB070
[n]	I. Neththikumara, A. Bogacz, T. Satogata, Y. Roblin, D. Turner, and D. Moser, “Beam study on low dispersion CEBAF arcs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3240-3243. doi:10.18429/JACoW-IPAC2023-WEPL055
[n]	S. Nagaitsev, J. Ruan, and J. K. Keung, “Laser Timing Jitter Measurements at the Fermilab A0 Photoinjector”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP112, pp. 664-666. 
[n]	P. A. Walker et al., “HORIZON 2020 EuPRAXIA Design Study”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1265-1268. doi:10.18429/JACoW-IPAC2017-TUOBB3
[n]	H. Yi, X. F. Wang, X. M. Yang, and W. Q. Zhang, “Heating Estimation of Undulator Vacuum Chamber at S3FEL”, in Proc. SAP'23, Xichang, China, Jul. 2023, pp. 151-154. doi:10.18429/JACoW-SAP2023-TUPB033
[n]	U. Iriso and F. P?®rez, “Synchrotron Radiation Monitors at ALBA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS056, pp. 3410-3412. 
[n]	L. Zytniak and G. Kowalski, “AI-powered scientific chatbot for accelerator operations”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1172-1176. doi:10.18429/JACoW-ICALEPCS2025-WEPD059
[n]	T. L. He, Z. H. Bai, G. Y. Feng, W. M. Li, W. W. Li, and L. Wang, “Harmonic cavity dynamics studies: efficient methods and new type of Robinson instabilities”, presented at the SAP'23, Xichang, China, Jul. 2023, paper MOPB009, unpublished. 
[n]	C. Welsch, “EuPRAXIA doctoral network”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1567-1570. doi:10.18429/JACoW-IPAC2023-TUPA109
[n]	I. Almansa, E. Peter, F. Rizzato, and S. Marini, “Self consistent effects in the ponderomotive acceleration of electron beams”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA058, unpublished. 
[n]	D. Di Croce, M. Giovannozzi, E. Krymova, T. Pieloni, M. Seidel, and F. F. Van der Veken, “Optimizing Beam Dynamics in LHC with Active Deep Learning”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 422-425. doi:10.18429/JACoW-HB2023-THAFP09
[n]	J. Sekutowicz, S. Kulinski, and M. Pachan, “Frequency-Dependent Capacitive-Inductive Model for Axially Coupled pi2 Standing Wave Biperiodic Structures”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2824-2828. 
[n]	O. Heid and T. J. S. Hughes, “Compact Solid State Direct Drive RF LINAC Experimental Program”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD42, pp. 159-161. 
[n]	M. Harvey et al., “Realization of a Custom Designed FPGA Based Embedded Controller”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB25, pp. 451-453. 
[n]	V. Grishin et al., “ESS WS scintillator system design and test results”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2276-2279. doi:10.18429/JACoW-IPAC2024-WEPG33
[n]	M. Ikegami et al., “Transverse Beam Matching and Orbit Corrections at J-PARC LINAC”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP078, pp. 260-262. 
[n]	A. Clapp, L. Bobb, and P. Karataev, “Second generation Cherenkov diffraction radiation studies at Diamond Light Source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG73, unpublished. 
[n]	H. Garcia Morales, J. F. Cardona, and R. Tom?ís Garc?¡a, “HL-LHC Local Linear Optics Correction at the Interaction Regions”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 628-631. doi:10.18429/JACoW-IPAC2021-MOPAB185
[n]	T. Itahashi, M. Kondo, and T. Yamagata, “Feasibility Study for Acceleration of Fission Fragments with AVF Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-12, pp. 608-611. 
[n]	A. Verdier, “Higher Order Tune Derivitives Due to Low-beta Insertions”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 249-252. 
[n]	S. H. Kim et al., “Beam Commissioning of C-band Standing-wave Accelerator for X-ray Source”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP036, pp. 136-138. 
[n]	A. Elghandour et al., “First results from the SUNDAE1 test stand at European XFEL”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7125, unpublished. 
[n]	B. C. Kuske, R. Follath, and A. Meseck, “Development and Application of Figures of Merit to Evaluate the Output of HGHG FEL Cascades”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH051, pp. 154-157. 
[n]	A. Halavanau et al., “Recent Developments in High Power High Brightness Double Bunch Self-Seeding at LCLS-II”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 67-69. doi:10.18429/JACoW-NAPAC2019-MOZBA4
[n]	S. C. Won, S.-S. Chang, J. Huang, J. H. Kirn, J. Lee, and J. W. Lee, “Status Report on Control System Development for PLS”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 147-150. doi:10.18429/JACoW-ICALEPCS1991-S03SRD11
[n]	M. Baylac, J. D'Hondt, J. Knobloch, C. Pira, and A. Stocchi, “Innovation for sustainable accelerator systems (the European iSAS Project)”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 107-111. doi:10.18429/JACoW-HIAT2025-TUZ01
[n]	T. Watanabe et al., “Calibration for Beam Energy Position Monitor System for Riken Superconducting Acceleration Cavity”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 526-529. doi:10.18429/JACoW-IBIC2019-WEPP007
[n]	M. A. Dehn and K. Aulenbacher, “Heat Dissipation of Photocathodes at High Laser Intensities for a New DC Electron Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2826-2828. doi:10.18429/JACoW-IPAC2021-WEPAB100
[n]	H. Huang et al., “First High Spin-Flip Efficiency for High Energy Polarized Protons”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 84-86. doi:10.18429/JACoW-IPAC2021-MOPAB014
[n]	Z. Liptak et al., “Testing electron polarization at SuperKEKB using Touschek lifetimes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2497-2499. doi:10.18429/JACoW-IPAC2024-WEPR15
[n]	D. J. Haenni, “A Front-End System for Industrial Type Controls at the SSC”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 283-286. doi:10.18429/JACoW-ICALEPCS1991-S07IC04
[n]	P. Elleaume and J. Chavanne, “Latest Developments on Insertion Devices”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUYFI02, pp. 969-973. 
[n]	H. Choi, T. Ha, M. Hong, J. Kim, E.-S. Kim, and S. Lee, “Thermal-structural analysis of the Korea-4GSR vacuum chambers”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB071, unpublished. 
[n]	P. Schreiber, A.-S. Mueller, A. Papash, and R. Ruprecht, “Beam-Based misalignment studies for physical realignment options at cSTART”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5019, unpublished. 
[n]	W. Lin, D. Sagan, E. Hamwi, G. Hoffstaetter, and V. Schoefer, “Generalized gradient map tracking in the Siberian snakes of the AGS and RHIC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2793-2796. doi:10.18429/JACoW-IPAC2023-WEPA064
[n]	G. Kube et al., “Upgrade of the BPM Long Term Drift Stabilization Scheme Based on External Crossbar Switching at PETRA III”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 395-398. doi:10.18429/JACoW-IBIC2022-WEP08
[n]	M. Gusarova, S. Khudyakov, and M. V. Lalayan, “MultP-M Code Geometry Import Module Performance Optimization”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB07, pp. 169-170. 
[n]	S. PAI, E. Prebys, and M. Backfish, “Realistic simulation of the 76-inch cyclotron: COMSOL magnetic-field export integrated with an opal particle-tracking model”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 387-390. doi:10.18429/JACoW-NAPAC2025-TUP017
[n]	S. Nath, “Linear Induction Accelerators at the Los Alamos National Laboratory DARHT Facility”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TH304, pp. 750-754. 
[n]	M. Painchault, P. E. Bernaudin, and G. Congretel, “Thermo-mechanic of a DTL Vessel for the IPHI Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE031, pp. 930-932. 
[n]	R. Franqueira Ximenes et al., “Latest Advances in Targetry Systems at CERN and Exciting Avenues for Future Endeavours”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 599-602. doi:10.18429/JACoW-HB2023-THBP48
[n]	Y. Hidaka et al., “Online multi-objective Bayesian optimization of injection efficiency and beam lifetime with skew quadrupoles at NSLS-II”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 199-203. doi:10.18429/JACoW-NAPAC2025-MOP066
[n]	W. R. Smythe and D. C. Van Westrum, “A Two-Gap Booster Synchrotron RF Cavity”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1054-1057. 
[n]	N. Huang, L. Jin, Y. Wu, and G. Xu, “A Preliminary Lattice Design of a Tau-Charm Factory Storage Ring in Beijing”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA21, pp. 573-575. 
[n]	A. C. Chew, S. Lee, and S. H. Saw, “Modular Pulse Sequencing in a Tokamak System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 364-366. doi:10.18429/JACoW-ICALEPCS1991-S10TS06

For LaTeX

Use Complete Form

For BibTeX

References

Back to search