Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] O. Piquet et al., “Progress in the Fabrication of the RFQ Accelerator for the CERN Linac4”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP042, pp. 497-499.
[n] H. Ren et al., “High Power Radiofrequency Operation of the Radiofrequency Quadrupoles in the Spallation Neutron Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 869-872. doi:10.18429/JACoW-IPAC2023-MOPL139
[n] F. L. Long, Z. L. Wu, X. Z. Wei, and J. Cheng, “UPGRADE OF THE BEPC STORAGE RING MAGNET TEMPERATURE PROTECTION SYSTEM”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP036, pp. XX-XX.
[n] S. R. Wagner, K. B. Bahrke-Rein, M. Basten, D. Koser, K. K??mpel, and H. Podlech, “High Power Tests of a New 4-Rod RFQ with Focus on its Mechanical Vibrations”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1523-1525. doi:10.18429/JACoW-IPAC2022-TUPOMS043
[n] D. A. Bizzozero, L. Ge, Z. Li, C.-K. Ng, J. Qiang, and L. Xiao, “Simulation Analysis of the LCLS-II Injector using ACE3P and IMPACT”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 779-782. doi:10.18429/JACoW-NAPAC2019-WEPLS05
[n] A. Jansson and L. Tchelidze, “Beam Diagnostics for the ESS”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD02, pp. 302-304.
[n] P. M. McIntyre and A. Sattarov, “Killing the Electron Cloud Effect in the LHC Arcs”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP047, pp. 2971-2973.
[n] S. Ohnuma and J. N. Vitale, “Space-Charge Effects on the Quadropole Focusing System in Low-Energy Proton Linear Accelerators”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 594-602.
[n] T. Natsui, M. Uesaka, K. Lee, E. Hashimoto, and S. Hirai, “Application of X-band Linac for Material Recognition with Two Fold Scintillator Detector”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP032, pp. 124-126.
[n] G. Pile, A. Nassiri, T. L. Smith, A. E. Grelick, and N. Arnold, “RF System Upgrades to the Advanced Photon Source Linear Accelerator in Support of the FEL Operation”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THC10, pp. 878-880.
[n] F. G. Resmini, “Summary Talk on Cyclotrons (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-01, pp. 19-26.
[n] Yu. G. Alenitcky et al., “CORRECTION OF THE CYCLOTRON RIC-30 MAGNETIC FIELD”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU02, pp. XX-XX.
[n] J. Burke, M. Jenkins, J. Ollier, and M. Procter, “Container stripping: enhanced classification of materials within cargo containers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3681-3683. doi:10.18429/JACoW-IPAC2024-THPR71
[n] M. Alves and F. de Sá, “Beam-based characterization of longitudinal coupled-bunch instabilities at SIRIUS storage ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2218-2221. doi:10.18429/JACoW-IPAC2025-WEPM104
[n] L. Pivetta and C. Scafuri, “The Evolution of the ELETTRA Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOPB03, pp. 265-267.
[n] A. C. Paul, “Physics Design Considerations of Diagnostic X Beam Transport System”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB20, pp. 485-487.
[n] J. Xing, L. Fan, Y. Hong, T. Huang, and X. Song, “Design of stainless steel vacuum chambers for the HALF storage ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB075, unpublished.
[n] G. Lopez, “Quench Simulation Studies of the TAC Jelly Roll Superferric Dipole Corrector Elements for the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2224-2227.
[n] C.-Y. Tsai and K. Fan, “A Semi-Analytical Approach to Six-Dimensional Path-Dependent Transport Matrices With Application to High-Brightness Charged-Particle Beam Transport”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 792-795. doi:10.18429/JACoW-NAPAC2019-WEPLS12
[n] A. Grudiev, R. M. Jones, W. Wuensch, R. Zennaro, V. F. Khan, and A. D, “A High Phase Advance Damped and Detuned Structure for the Main Linacs of CLIC”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP002, pp. 49-51.
For LaTeX
Use Complete Form
For BibTeX
References
- O. Piquet et al., “Progress in the Fabrication of the RFQ Accelerator for the CERN Linac4”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP042, pp. 497-499.
- H. Ren et al., “High Power Radiofrequency Operation of the Radiofrequency Quadrupoles in the Spallation Neutron Source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL139, pp. 869-872.
- F. L. Long, Z. L. Wu, X. Z. Wei, and J. Cheng, “UPGRADE OF THE BEPC STORAGE RING MAGNET TEMPERATURE PROTECTION SYSTEM”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP036, pp. XX-XX.
- S. R. Wagner, K. B. Bahrke-Rein, M. Basten, D. Koser, K. K??mpel, and H. Podlech, “High Power Tests of a New 4-Rod RFQ with Focus on its Mechanical Vibrations”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1523-1525.
- D. A. Bizzozero, L. Ge, Z. Li, C.-K. Ng, J. Qiang, and L. Xiao, “Simulation Analysis of the LCLS-II Injector using ACE3P and IMPACT”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 779-782.
- A. Jansson and L. Tchelidze, “Beam Diagnostics for the ESS”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD02, pp. 302-304.
- P. M. McIntyre and A. Sattarov, “Killing the Electron Cloud Effect in the LHC Arcs”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP047, pp. 2971-2973.
- S. Ohnuma and J. N. Vitale, “Space-Charge Effects on the Quadropole Focusing System in Low-Energy Proton Linear Accelerators”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 594-602.
- T. Natsui, M. Uesaka, K. Lee, E. Hashimoto, and S. Hirai, “Application of X-band Linac for Material Recognition with Two Fold Scintillator Detector”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP032, pp. 124-126.
- G. Pile, A. Nassiri, T. L. Smith, A. E. Grelick, and N. Arnold, “RF System Upgrades to the Advanced Photon Source Linear Accelerator in Support of the FEL Operation”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THC10, pp. 878-880.
- F. G. Resmini, “Summary Talk on Cyclotrons (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-01, pp. 19-26.
- Yu. G. Alenitcky et al., “CORRECTION OF THE CYCLOTRON RIC-30 MAGNETIC FIELD”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU02, pp. XX-XX.
- J. Burke, M. Jenkins, J. Ollier, and M. Procter, “Container stripping: enhanced classification of materials within cargo containers”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR71, pp. 3681-3683.
- M. Alves and F. de Sá, “Beam-based characterization of longitudinal coupled-bunch instabilities at SIRIUS storage ring”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM104, pp. 2218-2221.
- L. Pivetta and C. Scafuri, “The Evolution of the ELETTRA Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOPB03, pp. 265-267.
- A. C. Paul, “Physics Design Considerations of Diagnostic X Beam Transport System”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB20, pp. 485-487.
- J. Xing, L. Fan, Y. Hong, T. Huang, and X. Song, “Design of stainless steel vacuum chambers for the HALF storage ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB075, unpublished.
- G. Lopez, “Quench Simulation Studies of the TAC Jelly Roll Superferric Dipole Corrector Elements for the SSC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2224-2227.
- C.-Y. Tsai and K. Fan, “A Semi-Analytical Approach to Six-Dimensional Path-Dependent Transport Matrices With Application to High-Brightness Charged-Particle Beam Transport”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 792-795.
- A. Grudiev, R. M. Jones, W. Wuensch, R. Zennaro, V. F. Khan, and A. D, “A High Phase Advance Damped and Detuned Structure for the Main Linacs of CLIC”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP002, pp. 49-51.
Back to search