JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	N. Blaskovic Kraljevic, H.-C. Chao, H. Ghasem, I.P.S. Martin, and S. Preston, “Numerical optimization of the Diamond-II storage ring optics”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1254-1257. doi:10.18429/JACoW-IPAC2024-TUPG20
[n]	R. Boni, V. Chimenti, S. Fortebracci, F. Tazzioli, and G. Turchetti, “Experience with a 51-MHz, 200-kV, Aluminum rf Cavity”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3566-3569. 
[n]	M. Quinn, M. A. Bowler, A. MacDonald, and D. Roper, “Optical Systems for the Fourth Generation Light Source, 4GLS”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS47, pp. XX-XX. 
[n]	H. Jiang, I. Ben-Zvi, G. Burt, and M. S. R. Dissanayake Mudiyanselage, “The detail design of a twin-axial type FE-FRT for SASE”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7043, unpublished. 
[n]	D. Reschke, “New Aspects of Quality Control during Preparation of TTF 1.3 GHz Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP007, pp. 159-162. 
[n]	A. V. Smirnov et al., “Progress on 1.5 GHz Multi-kW CW Amplifier”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3821-3823. doi:10.18429/JACoW-IPAC2018-THPAL073
[n]	P. Tripathi, P. Kumar, and S. K. Singh, “Studies of ECR Plasmas and Materials Modification Using Low Energy Ion Beam Facility at IUAC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2074-2077. doi:10.18429/JACoW-IPAC2022-WEPOTK016
[n]	J. C. Collins and Wm. Manwaring, “The CIS Control System at IUCF”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP9, pp. 673-675. 
[n]	K. Denno, “Feasibility of Accelerator Application for Pulsed MHD Power Generation”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1813-1817. 
[n]	R. M. Jones and N. Baboi, “Emittance Dilution Due to Many-Band Long-Range Dipole Wakefields in the International Linear Collider Main Linacs”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP043, pp. 2792-2794. 
[n]	M. Znidarcic, “Spark EL - Single Pass BPM”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 471-473. doi:10.18429/JACoW-FEL2015-TUP044
[n]	X. Sun, R. M. Lill, and B. K. Stillwell, “The RF BPM Pickup Electrodes Design for the APS-MBA Upgrade”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 199-202. doi:10.18429/JACoW-IBIC2017-TUPCF03
[n]	S. X. Fang, “Current Status of BEPC”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 175-179. 
[n]	C. Birattari, A. Ferrari, and A. Fass??, “Radiological Protection for the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-08, pp. 404-407. 
[n]	H. A. Schwettman, “RF Linacs for FELs”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU2-01, pp. 275-279. 
[n]	K. J. Antes, Aa. M. Larsson, and C. R. Meitzler, “A Volume Ion Source with Pulsed Magnetic Field”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1008-1011. 
[n]	A. Coraluppi, G. Coudert, H. Muller, and F. V?Âlker, “Power Converters of the Main Dipole and Quadrupole Magnet Strings of the Antiproton Decelerator at CERN”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A16, pp. 2220-2224. 
[n]	B. P. Xiao et al., “Compact Higher Order Mode Filter for Crab Cavities in the Large Hadron Collider”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP044, pp. 1006-1008. 
[n]	I. A. Gusev, A. S. Medvedko, A. Yu. Protopopov, D. N. Pureskin, and D. V. Senkov, “HIGH-VOLTAGE SOURCE WITH OUTPUT VOLTAGE UP TO 60 KV WITH OUTPUT CURRENT UP TO 500MA”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH07, pp. XX-XX. 
[n]	C. Couillaud, G. Haouat, and A. Loulergue, “Electron Beam Transverse Emittance Measurement using Optical Transition Radiation Interferometry”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP013L, pp. 1594-1596. 
[n]	J. E. Spencer, “ESamp;H Issues for Design and Operation of Linear Colliders”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS144, pp. 0-3645. 
[n]	E. Adam, E. Gregory, D. Koop, and W. Marancik, “Practical Superconductors for High Energy Physics (HEP) Magnets”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3286-3289. 
[n]	K. Egawa and M. Masuzawa, “Field Measurements of the KEK B-Factory Dipole and Wiggler Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP165, pp. 3357-3359. 
[n]	R. J. Hayden and M. J. Jakobson, “Macrofilament Simulation of High Current Beam Transport”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2519-2522. 
[n]	V. S. Morozov et al., “Experimental verification of transparent spin mode in RHIC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2783-2786. doi:10.18429/JACoW-IPAC2019-WEPGW122
[n]	P. F. Tavares, L. Lin, and G. Tosin, “The LNLS Booster Synchrotron Dipole Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH017, pp. 3257-3259. 
[n]	M. A. Rehman et al., “Beam Control and Monitors for the Spiral Injection Test Experiment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2557-2560. doi:10.18429/JACoW-IPAC2019-WEPGW038
[n]	J. Wei, “Comparison Between Coasting and Bunched Beams on Optimum Stochastic Cooling and Signal Suppression”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1866-1869. 
[n]	K. Endo et al., “Smaller Synchrotron Design for Proton Therapy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1784-1787. 
[n]	C. S. Hopper, J. R. Delayen, and H. Park, “Characteristics and Fabrication of Spoke Cavities for High-Velocity Applications”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP005, pp. 902-905. 
[n]	S. Meyer and A. Chan, “A Components Database Design and Implementation for Accelerators and Detectors”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P031, pp. 2517-2519. 
[n]	L. R. Turner and L. Kettunen, “A New 3-D Integral Code for Computation of Accelerator Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2140-2143. 
[n]	J. L. Hirshfield, B. Hafizi, and P. Sprangle, “Beam Quality in a Cyclotron Autoresonance Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2584-2587. 
[n]	A. Lucotte, J. M. Perez, M. Vretenar, and T. Torims, “The TIARA Collaboration: Shaping Two Decades of EU Support for Coordinated Accelerator R&D”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP8029, unpublished. 
[n]	V. B. Reva et al., “Commissioning of Electron Cooler EC-300”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT120, pp. 1419-1421. 
[n]	C. Benabderrahmane et al., “LUNEX 5 FEL Line Undulators and Magnetic Elements”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THOA04, pp. 531-534. 
[n]	Z. He et al., “Control Systems for Spallation Target in China Initiative Accelerator Driven System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1147-1150. doi:10.18429/JACoW-ICALEPCS2015-THHD3O01
[n]	E. Griesmayer, B. Dehning, D. Dobos, E. Effinger, and H. Pernegger, “A Fast CVD Diamond Beam Loss Monitor for LHC”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD41, pp. 143-145. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search