Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Svandrlik et al., “Status of the FERMI@Elettra Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOBB03, pp. 1092-1094.
[n] G. J. Caporaso, “Kiloamp High-Brightness Beams”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1001-1006.
[n] F. Stulle and J. F. Bergoz, “Surface Waves for Testing of Beam Instrumentation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR006, pp. 780-782.
[n] M. A. Kempkes, F. O. Arntz, J. A. Casey, M. P. J. Gaudreau, and I. Roth, “Marx Bank Technology for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOBKI02, pp. 2590-2592.
[n] R. A. Lerche et al., “The NIF Integrated Timing System - Design and Performance”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP069, pp. XX-XX.
[n] A. Dainelli, A. Facco, A. Lombardi, and E. A. Togun, “Beam Optics Progress for the ALPI Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1291-1294.
[n] F. Voelker, G. Lambertson, and R. Rimmer, “Higher Order Mode Damping in a Pill Box Cavity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 687-690.
[n] P. F. Tavares, S. R. Marques, and H. J. Onisto, “Single-Bunch Injection System for the LNLS Booster Injector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG046, pp. 3279-3281.
[n] A. Nassiri, G. Mavrogenes, and W. Wesolowski, “The Linac Injector for the ANL 7 GeV Advanced Photon Source”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH411, pp. 611-613.
[n] A. Drozhdin and N. Mokhov, “Modeling of Beam Loss in Tevatron and Backgrounds in the BTeV Detector”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT114, pp. 803-805.
[n] W. M. Daqa, O. Boine-Frankenheim, I. Hofmann, V. Kornilov, and J. Struckmeier, “Linear Coupling with Space Charge in SIS18”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD004, pp. 1922-1924.
[n] V. G. Dudnikov, A. Dudas, and A. V. Aleksandrov, “Ribbon Electron Beam Source for Bunched Beam Profile Monitor and Tomography”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA15, pp. 916-918.
[n] S. Redaelli et al., “Comparison of Different Tracking Codes for Beam Delivery Systems of Linear Colliders”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI050, pp. 488-490.
[n] J. P. Sikora and R. Littauer, “Monitoring System to Permit Accurate Alignment of Beams at Collision in CESR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1130-1133.
[n] J. D. Saunders, L. A. Builta, S. W. Downey, T. J. Kauppila, D. C. Moir, and T. J. Ringler, “Simple Laser-Driven, Metal-Photocathodes as Cold, High-Current Electron Sources”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 337-340.
[n] E. Matias, G. Judkins, M. McKibben, and J. Swirsky, “The Use of Process and Instrumentation Drawings for Accelerator and Beamline Control Applications at the Canadian Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP047, pp. 191-193.
[n] A. V. Zlobin, G. Chlachidze, A. Nobrega, I. Novitski, and M. Karppinen, “QUENCH PROTECTION STUDIES OF 11T Nb3Sn DIPOLE MODELS FOR LHC UPGRADES”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2725-2727. doi:10.18429/JACoW-IPAC2014-WEPRI098
[n] D. R. S. Di Calafiori et al., “Improving the Compact Muon Solenoid Electromagnetic Calorimeter Control and Safety Systems for the Large Hadron Collider Run 2”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 117-120. doi:10.18429/JACoW-ICALEPCS2015-MOPGF016
[n] H. K. Sayed, S. A. Bogacz, and P. Chevtsov, “Spin Rotator Optics for MEIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB044, pp. 1626-1628.
[n] M. Znidarcic, E. Janezic, P. Leban, and K. Lang, “Hadron BPM for the FAIR Project”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1016-1018. doi:10.18429/JACoW-IPAC2015-MOPTY040
[n] J. T. Bradley III, D. Rees, A. Scheinker, and R. L. Sheffield, “High Power RF Requirements for Driving Discontinuous Bunch Trains in the MaRIE Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 320-322. doi:10.18429/JACoW-LINAC2016-MOP106016
[n] D. Moffat et al., “Use of Ferrite-50 to Strongly Damp Higher Order Modes”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 664-667.
[n] B. Cluggish, S. Galkin, and J. S. Kim, “Modeling Ion Extraction from an ECR Ion Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS077, pp. 1826-1828.
[n] L. O. Dallin and D. G. Bilbrough, “Modelling of Elliptically Polarizing Undulators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD004, pp. 3087-3089.
[n] M. L. Bonardi et al., “Update On Cyclotron Production Studies Of No-Carrieradded: Copper-64, Astatine-211/Polonium-211g, Rhenium-186g”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 254-256.
[n] O. Holme, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “Re-integration and Consolidation of the Detector Control System for the Compact Muon Solenoid Electromagnetic Calorimeter”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC035, pp. 154-157.
[n] V. Prasad, D. Barapatre, M. Jagannath, R. K. Sahu, K. P. Sharma, and G. Singh, “Precise Survey and Alignment of Synchrotron Radiation Source Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA086, pp. 761-763.
[n] W. Kaabi, M. Lacroix, and Y. Peinaud, “Coupler Cleaning Machine”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO011, pp. 374-376.
[n] C. E. Mayes and G. H. Hoffstaetter, “Cornell Energy Recovery Linac Lattice and Layout”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE098, pp. 2356-2358.
[n] T. S. Wang, “A Numerical Study of Bunched Beam Transverse Electron-Proton Instability Based on the Centroid Model”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB037, pp. 3095-3097.
[n] K. Gross, H. Klingbeil, and D. E. M. Lens, “Impact of Simplified Stationary Cavity Beam Loading on the Longitudinal Feedback System for SIS100”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1736-1738. doi:10.18429/JACoW-IPAC2014-TUPRI073
[n] B. A. Bowling, H. Shoaee, J. van Zeijts, S. Witherspoon, and W. Watson, “Integrated On-Line Accelerator Modeling at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAE10, pp. 2181-2183.
[n] Ph. Piot, K. Flöttmann, M. Ferrario, and B. Grigoryan, “The TESLA X-FEL Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH062, pp. 2236-2238.
[n] R. L. Keizer, K. H. Kissler, and R. Oberli, “Improvement of the Extraction Channels of the CERN-SPS Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1836-1839.
[n] A. H. Adeyemi and E. J-M. Voutier, “The Calibration of the PEPPo Polarimeter for Electrons and Positrons”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA078, pp. 861-863.
[n] Q. Wu, S. A. Belomestnykh, and I. Ben-Zvi, “Novel Deflecting Cavity Design for eRHIC”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO007, pp. 707-709.
[n] S. V. Kutsaev, B. Mustapha, J. A. Nolen, and P. N. Ostroumov, “CW Heavy Ion Accelerator With Adjustable Energy for Material Science”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper WEIOB04, pp. 780-784.
[n] J. R. Delayen, C. L. Bohn, W. L. Kennedy, B. J. Micklich, C. T. Roche, and L. Sagalovsky, “Development of High-Current Superconducting Accelerators at Argonne National Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93A02, pp. XX-XX.
[n] P. Schnizer, E. S. Fischer, and B. Schnizer, “Magnetic Field Description in Curved Accelerator Magnets using Local Toroidal Multipoles”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC060, pp. 2154-2156.
[n] C. J. Bocchetta, D. Bulfone, J.-C. Denard, and M. Plesko, “The Diagnostic Line for the Acceptance Tests of the ELETTRA 100 MeV Pre-Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1097-1100.
[n] B. Haerer, B. J. Holzer, F. Zimmermann, and A. V. Bogomyagkov, “First Considerations on Beam Optics and Lattice Design for the Future Electron-Positron Collider FCC-ee”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2162-2164. doi:10.18429/JACoW-IPAC2015-TUPTY059
[n] C. H. Kuo, K.-T. Hsu, and M.-H. Wang, “The IEEE-1394 Digital Camera Application in the Taiwan Light Source”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper RPAT058, unpublished.
[n] T. Shibata, K. Ishii, H. Matsumoto, N. Matsumoto, T. Sugimoto, and K. Fan, “The Development of a New Low Field Septum Magnet System for Fast Extraction in Main Ring of J-PARC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1340-1342. doi:10.18429/JACoW-IPAC2016-TUPMR040
[n] Ch. Schmidt, L. Butkowski, M. Hoffmann, H. Schlarb, M. Grzegrzolka, and I. Rutkowski, “High Performance and Low Latency Single Cavity RF Control Based on MTCA.4”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC122, pp. 1348-1350.
[n] M. Apollonio, W. J. Hoffman, A. J. Rose, A. Thomson, and R. Bartolini, “Girder Alignment in the Diamond Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME054, pp. 3052-3054.
[n] V. Judin et al., “Observation of Bursting Behavior Using Multiturn Measurements at ANKA”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA021, pp. 2526-2528.
[n] D. L. Bruhwiler, I. S. Lehrman, J. Rathke, M. F. Reusch, and A. M. M. Todd, “Detailed High-Current Beam Optics for Ions and Electrons”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-80, pp. 555-557.
[n] M.-A. Tordeux et al., “Low-alpha Operation for the SOLEIL Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP004, pp. 1608-1610.
[n] J. Morris, S. Binello, L. T. Hoff, and C. Theisen, “Integrated Timing System for the EBIS Pre-Injector”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC113, pp. 1325-1327.
[n] A.-S. M??ller et al., “Studies of Polarisaion of Coherent THz Edge Radiation at the ANKA Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA022, pp. 2529-2531.
[n] R. Assmann et al., “SLC - The End Game”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THZF101, pp. 18-22.
[n] J. S. Kim et al., “Status of FAR-TECH's ECR Ion Source Optimization Modeling”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS078, pp. 1829-1831.
[n] G. C. Pappas, J.-Y. Jung, and C. A. Swenson, “Magnet Power Supplies for ALS-U”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2538-2540. doi:10.18429/JACoW-IPAC2018-WEPMF072
[n] M.-S. Chiu, H.-P. Chang, P. J. Chou, and F. H. Tseng, “Application Program for Automatically Getting the First Turn and Closed Orbit in TPS Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 310-312. doi:10.18429/JACoW-IPAC2014-MOPRO095
[n] C. Yao et al., “High Charge Development of the APS Injector for an MBA Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1828-1830. doi:10.18429/JACoW-IPAC2015-TUPJE079
[n] Z. Q. He, J. Wei, and Y. Zhang, “Beam Dynamics Effects of High Order Multipoles in Non-Axisymmetric Superconducting RF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4045-4047. doi:10.18429/JACoW-IPAC2015-THPF137
[n] A. Peters et al., “Five Years of Accelerator Operation Experience at HIT”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOAB03, pp. 1083-1085.
[n] C. J. Gardner et al., “Setup and Performance of RHIC for the 2008 Run with Deuteron and Gold Collisions”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP011, pp. 2548-2550.
[n] K. W. Kakihara, A. Enomoto, G. Horikoshi, Y. Saito, and I. Sato, “Pressure-Distribution Analysis of the Vacuum System for the KEKB Injector Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-84, pp. 567-569.
[n] L. Wang, X. Huang, Y. Nosochkov, J. A. Safranek, and M. Borland, “Optimization of the Dynamic Aperture for SPEAR3 Low-emittance Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC096, pp. 1380-1382.
[n] P. Pierini et al., “Fabrication of the 3.9 GHz SRF Structures for the European XFEL”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB035, pp. 1162-1165.
[n] J. A. Clarke et al., “Status of the HeLiCal Contribution to the Polarised Positron Source for the International Linear Collider”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS072, pp. 715-717.
[n] S. Bettoni, B. Beutner, and V. A. Goryashko, “Microbunching Instability Studies in SwissFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP064, pp. 1744-1746.
[n] H. Nakayama et al., “Small-Beta Collimation at SuperKEKB to Stop Beam-Gas Scattered Particles and to Avoid Transverse Mode Coupling Instability”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOBC02, pp. 1104-1106.
[n] S. Jackson, J-L. Nougaret, and M. Peryt, “Use of WML Technologies for Data-driven Accelerator Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_094.
[n] V. Baglin, G. Bregliozzi, D. Calegari, J. M. Jimenez, G. Lanza, and G. Schneider, “The LHC Experimental Beam Pipe Neon Venting, Pumping and Conditioning”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS017, pp. 1557-1559.
[n] Y. Liu, T. Maruta, K. Futatsukawa, T. Miyao, M. Ikegami, and A. Miura, “Stability Studies for J-PARC Linac Upgrade to 50 mA/400 MeV”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3785-3788. doi:10.18429/JACoW-IPAC2015-THPF039
[n] P. Rios Rodriguez et al., “Analysis and Operational Feedback on the New Design of the High Energy Beam Dump in the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3524-3527. doi:10.18429/JACoW-IPAC2017-WEPVA110
For LaTeX
Use Complete Form
For BibTeX
References
- M. Svandrlik et al., “Status of the FERMI@Elettra Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUOBB03, pp. 1092-1094.
- G. J. Caporaso, “Kiloamp High-Brightness Beams”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1001-1006.
- F. Stulle and J. F. Bergoz, “Surface Waves for Testing of Beam Instrumentation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR006, pp. 780-782.
- M. A. Kempkes, F. O. Arntz, J. A. Casey, M. P. J. Gaudreau, and I. Roth, “Marx Bank Technology for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOBKI02, pp. 2590-2592.
- R. A. Lerche et al., “The NIF Integrated Timing System - Design and Performance”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP069, pp. XX-XX.
- A. Dainelli, A. Facco, A. Lombardi, and E. A. Togun, “Beam Optics Progress for the ALPI Project”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1291-1294.
- F. Voelker, G. Lambertson, and R. Rimmer, “Higher Order Mode Damping in a Pill Box Cavity”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 687-690.
- P. F. Tavares, S. R. Marques, and H. J. Onisto, “Single-Bunch Injection System for the LNLS Booster Injector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG046, pp. 3279-3281.
- A. Nassiri, G. Mavrogenes, and W. Wesolowski, “The Linac Injector for the ANL 7 GeV Advanced Photon Source”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH411, pp. 611-613.
- A. Drozhdin and N. Mokhov, “Modeling of Beam Loss in Tevatron and Backgrounds in the BTeV Detector”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT114, pp. 803-805.
- W. M. Daqa, O. Boine-Frankenheim, I. Hofmann, V. Kornilov, and J. Struckmeier, “Linear Coupling with Space Charge in SIS18”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD004, pp. 1922-1924.
- V. G. Dudnikov, A. Dudas, and A. V. Aleksandrov, “Ribbon Electron Beam Source for Bunched Beam Profile Monitor and Tomography”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA15, pp. 916-918.
- S. Redaelli et al., “Comparison of Different Tracking Codes for Beam Delivery Systems of Linear Colliders”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI050, pp. 488-490.
- J. P. Sikora and R. Littauer, “Monitoring System to Permit Accurate Alignment of Beams at Collision in CESR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1130-1133.
- J. D. Saunders, L. A. Builta, S. W. Downey, T. J. Kauppila, D. C. Moir, and T. J. Ringler, “Simple Laser-Driven, Metal-Photocathodes as Cold, High-Current Electron Sources”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 337-340.
- E. Matias, G. Judkins, M. McKibben, and J. Swirsky, “The Use of Process and Instrumentation Drawings for Accelerator and Beamline Control Applications at the Canadian Light Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP047, pp. 191-193.
- A. V. Zlobin, G. Chlachidze, A. Nobrega, I. Novitski, and M. Karppinen, “QUENCH PROTECTION STUDIES OF 11T Nb3Sn DIPOLE MODELS FOR LHC UPGRADES”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2725-2727.
- D. R. S. Di Calafiori et al., “Improving the Compact Muon Solenoid Electromagnetic Calorimeter Control and Safety Systems for the Large Hadron Collider Run 2”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 117-120.
- H. K. Sayed, S. A. Bogacz, and P. Chevtsov, “Spin Rotator Optics for MEIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB044, pp. 1626-1628.
- M. Znidarcic, E. Janezic, P. Leban, and K. Lang, “Hadron BPM for the FAIR Project”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1016-1018.
- J. T. Bradley III, D. Rees, A. Scheinker, and R. L. Sheffield, “High Power RF Requirements for Driving Discontinuous Bunch Trains in the MaRIE Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 320-322.
- D. Moffat et al., “Use of Ferrite-50 to Strongly Damp Higher Order Modes”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 664-667.
- B. Cluggish, S. Galkin, and J. S. Kim, “Modeling Ion Extraction from an ECR Ion Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS077, pp. 1826-1828.
- L. O. Dallin and D. G. Bilbrough, “Modelling of Elliptically Polarizing Undulators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD004, pp. 3087-3089.
- M. L. Bonardi et al., “Update On Cyclotron Production Studies Of No-Carrieradded: Copper-64, Astatine-211/Polonium-211g, Rhenium-186g”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 254-256.
- O. Holme, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “Re-integration and Consolidation of the Detector Control System for the Compact Muon Solenoid Electromagnetic Calorimeter”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC035, pp. 154-157.
- V. Prasad, D. Barapatre, M. Jagannath, R. K. Sahu, K. P. Sharma, and G. Singh, “Precise Survey and Alignment of Synchrotron Radiation Source Indus-2”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA086, pp. 761-763.
- W. Kaabi, M. Lacroix, and Y. Peinaud, “Coupler Cleaning Machine”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO011, pp. 374-376.
- C. E. Mayes and G. H. Hoffstaetter, “Cornell Energy Recovery Linac Lattice and Layout”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE098, pp. 2356-2358.
- T. S. Wang, “A Numerical Study of Bunched Beam Transverse Electron-Proton Instability Based on the Centroid Model”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB037, pp. 3095-3097.
- K. Gross, H. Klingbeil, and D. E. M. Lens, “Impact of Simplified Stationary Cavity Beam Loading on the Longitudinal Feedback System for SIS100”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1736-1738.
- B. A. Bowling, H. Shoaee, J. van Zeijts, S. Witherspoon, and W. Watson, “Integrated On-Line Accelerator Modeling at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAE10, pp. 2181-2183.
- Ph. Piot, K. Flöttmann, M. Ferrario, and B. Grigoryan, “The TESLA X-FEL Injector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH062, pp. 2236-2238.
- R. L. Keizer, K. H. Kissler, and R. Oberli, “Improvement of the Extraction Channels of the CERN-SPS Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1836-1839.
- A. H. Adeyemi and E. J-M. Voutier, “The Calibration of the PEPPo Polarimeter for Electrons and Positrons”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA078, pp. 861-863.
- Q. Wu, S. A. Belomestnykh, and I. Ben-Zvi, “Novel Deflecting Cavity Design for eRHIC”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO007, pp. 707-709.
- S. V. Kutsaev, B. Mustapha, J. A. Nolen, and P. N. Ostroumov, “CW Heavy Ion Accelerator With Adjustable Energy for Material Science”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper WEIOB04, pp. 780-784.
- J. R. Delayen, C. L. Bohn, W. L. Kennedy, B. J. Micklich, C. T. Roche, and L. Sagalovsky, “Development of High-Current Superconducting Accelerators at Argonne National Laboratory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93A02, pp. XX-XX.
- P. Schnizer, E. S. Fischer, and B. Schnizer, “Magnetic Field Description in Curved Accelerator Magnets using Local Toroidal Multipoles”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC060, pp. 2154-2156.
- C. J. Bocchetta, D. Bulfone, J.-C. Denard, and M. Plesko, “The Diagnostic Line for the Acceptance Tests of the ELETTRA 100 MeV Pre-Injector”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1097-1100.
- B. Haerer, B. J. Holzer, F. Zimmermann, and A. V. Bogomyagkov, “First Considerations on Beam Optics and Lattice Design for the Future Electron-Positron Collider FCC-ee”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2162-2164.
- C. H. Kuo, K.-T. Hsu, and M.-H. Wang, “The IEEE-1394 Digital Camera Application in the Taiwan Light Source”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT058, unpublished.
- T. Shibata, K. Ishii, H. Matsumoto, N. Matsumoto, T. Sugimoto, and K. Fan, “The Development of a New Low Field Septum Magnet System for Fast Extraction in Main Ring of J-PARC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1340-1342.
- Ch. Schmidt, L. Butkowski, M. Hoffmann, H. Schlarb, M. Grzegrzolka, and I. Rutkowski, “High Performance and Low Latency Single Cavity RF Control Based on MTCA.4”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC122, pp. 1348-1350.
- M. Apollonio, W. J. Hoffman, A. J. Rose, A. Thomson, and R. Bartolini, “Girder Alignment in the Diamond Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME054, pp. 3052-3054.
- V. Judin et al., “Observation of Bursting Behavior Using Multiturn Measurements at ANKA”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA021, pp. 2526-2528.
- D. L. Bruhwiler, I. S. Lehrman, J. Rathke, M. F. Reusch, and A. M. M. Todd, “Detailed High-Current Beam Optics for Ions and Electrons”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-80, pp. 555-557.
- M.-A. Tordeux et al., “Low-alpha Operation for the SOLEIL Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP004, pp. 1608-1610.
- J. Morris, S. Binello, L. T. Hoff, and C. Theisen, “Integrated Timing System for the EBIS Pre-Injector”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC113, pp. 1325-1327.
- A.-S. M??ller et al., “Studies of Polarisaion of Coherent THz Edge Radiation at the ANKA Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA022, pp. 2529-2531.
- R. Assmann et al., “SLC - The End Game”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THZF101, pp. 18-22.
- J. S. Kim et al., “Status of FAR-TECH's ECR Ion Source Optimization Modeling”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS078, pp. 1829-1831.
- G. C. Pappas, J.-Y. Jung, and C. A. Swenson, “Magnet Power Supplies for ALS-U”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2538-2540.
- M.-S. Chiu, H.-P. Chang, P. J. Chou, and F. H. Tseng, “Application Program for Automatically Getting the First Turn and Closed Orbit in TPS Commissioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 310-312.
- C. Yao et al., “High Charge Development of the APS Injector for an MBA Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1828-1830.
- Z. Q. He, J. Wei, and Y. Zhang, “Beam Dynamics Effects of High Order Multipoles in Non-Axisymmetric Superconducting RF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4045-4047.
- A. Peters et al., “Five Years of Accelerator Operation Experience at HIT”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUOAB03, pp. 1083-1085.
- C. J. Gardner et al., “Setup and Performance of RHIC for the 2008 Run with Deuteron and Gold Collisions”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP011, pp. 2548-2550.
- K. W. Kakihara, A. Enomoto, G. Horikoshi, Y. Saito, and I. Sato, “Pressure-Distribution Analysis of the Vacuum System for the KEKB Injector Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-84, pp. 567-569.
- L. Wang, X. Huang, Y. Nosochkov, J. A. Safranek, and M. Borland, “Optimization of the Dynamic Aperture for SPEAR3 Low-emittance Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC096, pp. 1380-1382.
- P. Pierini et al., “Fabrication of the 3.9 GHz SRF Structures for the European XFEL”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB035, pp. 1162-1165.
- J. A. Clarke et al., “Status of the HeLiCal Contribution to the Polarised Positron Source for the International Linear Collider”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS072, pp. 715-717.
- S. Bettoni, B. Beutner, and V. A. Goryashko, “Microbunching Instability Studies in SwissFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP064, pp. 1744-1746.
- H. Nakayama et al., “Small-Beta Collimation at SuperKEKB to Stop Beam-Gas Scattered Particles and to Avoid Transverse Mode Coupling Instability”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUOBC02, pp. 1104-1106.
- S. Jackson, J-L. Nougaret, and M. Peryt, “Use of WML Technologies for Data-driven Accelerator Controls”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_094.
- V. Baglin, G. Bregliozzi, D. Calegari, J. M. Jimenez, G. Lanza, and G. Schneider, “The LHC Experimental Beam Pipe Neon Venting, Pumping and Conditioning”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS017, pp. 1557-1559.
- Y. Liu, T. Maruta, K. Futatsukawa, T. Miyao, M. Ikegami, and A. Miura, “Stability Studies for J-PARC Linac Upgrade to 50 mA/400 MeV”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3785-3788.
- P. Rios Rodriguez et al., “Analysis and Operational Feedback on the New Design of the High Energy Beam Dump in the CERN SPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3524-3527.
Back to search