Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. M. Nam, S. Shin, Y. Sohn, H. Jin, Y. Park, and M. Chung, “Analytic Phase-Space and Spectral Modeling of Amplitude-Dependent Resonance Island Dynamics Near the Third-Integer Resonance”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5631, unpublished.
[n] L. Celona et al., “Design Issues of the Proton Source for the ESS Facility”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB076, pp. 1008-1010.
[n] S. Adam and M. Humbel, “Integration of Compute-Bound Tasks in the SIN Control System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-04, pp. 418-421.
[n] H. Tian, C. E. Reece, W. Sommer, O. Trofimova, and L. Zhao, “Analysis of the Topographic Transformation of Niobium Surfaces Under Controlled EP Conditions”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO081, pp. 422-425.
[n] C. R. Ader, M. L. Alvarez, J. S. Batko, R. Campos, M. W. McGee, and A. C. Watts, “Accelerator Vacuum Windows: A Review of Past Research and a Strategy for the Development of a New Design for Improved Safety and Longevity for Particle Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2237-2239. doi:10.18429/JACoW-IPAC2019-WEXXPLS2
[n] A. A. Litvinov, I. K. Sedlyarov, and A. G. Tribendis, “Set-up for Nb Surface Quality Checking Using HC3”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87F02, pp. XX-XX.
[n] M. Borland, “Tutorial on Accelerator-Based Light Sources”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOAS1, pp. 702-706.
[n] M. Alabau et al., “Effect of the Non-Linear Magnetic Fields on the Emittance Growth in the ATF Extraction Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP075, pp. 2670-2672.
[n] R. J. Steinhagen et al., “Results of the LHC Prototype Chromaticity Measurement System Studies in the CERN-SPS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC098, pp. 1290-1292.
[n] A. Penirschke, A. Angelovski, M. Hansli, R. Jakoby, and T. Mahn, “Development of a Modified Six-Port Discriminator for Precise Beam Position Measurements”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WECYB1, pp. 495-499.
[n] S. Sudo et al., “Large-scale Fusion Research System Integration Based on the Superconducting Large Helical Device and Plasma Simulator at NIFS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUD005, pp. 352-354.
[n] T. T. Arkan et al., “LCLS-II Cryomodules Production Experience and Lessons Learned at Fermilab”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 709-714. doi:10.18429/JACoW-SRF2019-TUP101
[n] A. M. Opekunov, “Experimental Studies of Electron Beam Characteristics of High Power CW Resonance Accelerator”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 289-291. doi:10.18429/JACoW-RUPAC2018-WEPSB06
[n] A. Van Ginneken and T. Borak, “Beamstop Experiment at 29.4 GeV”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 746-748.
[n] K. I. Kuzmenkov et al., “Production of Intense Metal Ion Beams at the DC-60 Cyclotron”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 504-506. doi:10.18429/JACoW-RUPAC2018-THPSC50
[n] A. N. Shein, “Prospects of Creating a Modern Resonance Electron Accelerator”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 295-297. doi:10.18429/JACoW-RUPAC2018-WEPSB08
[n] I. V. Agapov and G. Geloni, “Towards Realistic Modelling of the FEL Radiation for the European XFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA006, pp. 1173-1175.
[n] P. J. Bryant, “AGILE, A Tool for Interactive Lattice Design”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B03, pp. 1357-1359.
[n] R. K. Jobe, M. J. Browne, M. Flores, N. Phinney, H. D. Schwarz, and J. C. Sheppard, “Computer Control of the Energy Output of a Klystron in the SLC”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 735-738.
[n] H. G. Blosser, M. M. Gordon, and D. A. Johnson, “Proposed Michigan State University Trans-uranic Accelerator Facility”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A06, pp. XX-XX.
[n] E. D. Hudson, “Oak Ridge Model Magnet Studies”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59B05, pp. 104-109.
[n] S. Rowan et al., “CSCM: EXPERIMENTAL AND SIMULATION RESULTS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3988-3990. doi:10.18429/JACoW-IPAC2014-THPRI093
[n] W. X. Cheng, B. Bacha, Y. Hu, O. Singh, and H. Xu, “NSLS2 Visible Synchrotron Light Monitor Diagnostic Beamline Commissioning”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF21, pp. 369-373.
[n] T. M. Putman, R. A. Jameson, and T. M. Schultheis, “Application of a Digital Computer to the Control and Monitoring of a Proton Linear Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 21-27.
[n] J. J. Espinosa, J. F. Cardona, and D. C, “Non Linear Space Charge Effects on Transverse Beam Stability”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN011, pp. 3247-3249.
[n] C. Liu et al., “Transverse Beam Emittance Measurements with Multi-Slit and Moving-Slit Devices for LEReC”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 486-489. doi:10.18429/JACoW-IBIC2018-WEPB21
[n] R. M. Lill, J. T. Collins, G. Decker, L. Erwin, J. Z. Xu, and B. X. Yang, “Studies of APS Storage Ring Vacuum Chamber Thermal Mechanical Effects and their Impact on Beam Stability”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM050, pp. 265-268.
[n] R. L. Warnock and J. C. Bergstrom, “Coherent Radiation in Whispering Gallery Modes”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP119, pp. 1710-1712.
[n] J. K. Pozimski et al., “PAMELA - A Model for an FFAG based Hadron Therapy Machine”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN076, pp. 2880-2882.
[n] D. W. Reid, “RF Power Sources for 1990 and Beyond”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO2-3, pp. 29-32.
[n] S. Franke et al., “Integration of the Moment-Based Beam-Dynamics Simulation Tool V-Code into the S-DALINAC Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN002, pp. 235-238.
[n] P. Jain, D. P. Chakravarthy, A. K. Ray, and P. Roychowdhury, “Inhomogenous Field Wien Filter Design”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA014, pp. 354-356.
[n] L. Dallin et al., “Canadian Light Source Status and Commissioning Results”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF007, pp. 2269-2271.
[n] M. Huck et al., “Experimental Characterization of the Coherent Harmonic Generation Source at the DELTA Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA005, pp. 2132-2134.
[n] C. Schmidt, R. Noble, J. Palkovic, and F. Mills, “Redesign of the Low Energy Section of the Fermilab Linac to Improve Beam Brightness”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-56, pp. 188-189.
[n] Z. Geng, V. Ayvazyan, and S. Simrock, “Architecture Design of the Application Software for the Low-Level RF Control System of the Free-Electron Laser at Hamburg”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS010, pp. 798-800.
[n] R. P. Fliller et al., “Beam Transport and Diagnostics for the NSLS-II Injection System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP006, pp. 1096-1098.
[n] P. J. Chou, H.-P. Chang, C.-C. Kuo, and W. T. Liu, “Design Status of Transfer Lines in TPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP002, pp. 2261-2263.
[n] Z. Shahriari, G. A. Dumont, and K. Fong, “Norm-optimal Iterative Learning Control to Cancel Beam Loading Effect on the Accelerating Field”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3824-3826. doi:10.18429/JACoW-IPAC2019-THPRB011
[n] F. Sakamoto et al., “Development of the High Resolution Electron Beam Profile Monitor for Medical Use X-Band Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11020, pp. XX-XX.
[n] M. Sawamura et al., “Fabrication of Superconducting Spoke Cavity for Laser Compton Scattered Photon Sources”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2177-2179. doi:10.18429/JACoW-IPAC2016-WEPMB025
[n] J. I. M. Botman, H. L. Hagedoorn, R. J. W. Stas, and R. W. de Leeuw, “Orbit Dynamics in a Low Energy Electron Linear Accelerator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP045L, pp. 944-946.
[n] A. Zholents et al., “A Collinear Wakefield Accelerator for a High Repetition Rate Multi-beamline Soft X-ray FEL Facility”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper FRB02, pp. 993-998.
[n] E. Traykov, T. Adam, E. Bouquerel, and C. Maazouzi, “Development of mass-dependent focusing techniques in quadrupole mass filters”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4065, unpublished.
[n] M. Rosing and W. Gai, “The Transverse Forces in Wakefield Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 243-246.
[n] V. A. Verzilov, “Progress with Low Intensity Diagnostics at ISAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD081, pp. 885-887.
[n] C. S. Chen, K. T. Hsu, K. H. Hu, S. H. Lee, T. S. Ueng, and C. J. Wang, “Control Interface of New White Circuit for SRRC 1.5 GeV Booster Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B19, pp. 1838-1840.
[n] Y. Li, Z. P. Li, W. B. Liu, and J. Peng, “XAL Applications Development for CSNS Transport Lines”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 98-100. doi:10.18429/JACoW-HB2016-MOPR018
[n] L. Zhang, S. An, Y.-S. Cho, Y. M. Li, and Y. Z. Tang, “Control System for a PEFP FPC Baking System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP166, pp. 940-942.
[n] O. I. Meshkov et al., “Experimental Comparison of Performance of Various Fluorescent Screens Applied for Relativistic Electron/Positron Beam Imaging”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper WEOB02, pp. 558-560.
[n] E. Nebot Del Busto et al., “Measurement of Beam Losses Using Optical Fibers at the Australian Synchrotron”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WECZB3, pp. 515-520.
[n] P. J. S. Barratt et al., “High Stability Operation of the ISIS Pulsed Spallation Neutron Source at 200 micro-A”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP094G, pp. 584-586.
[n] P. R. Hanley, A. W. Haberl, and A. Taylor, “Water Cooled Targets for Intense Ion Beams”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 933-938.
[n] R. Tarkeshian et al., “Conceptual Ideas for the Temporal Overlap of the Electron Beam and the Seed Laser for sFLASH”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH051, pp. 363-366.
[n] M. L. Neubauer, A. Dudas, and A. Krasnykh, “S-Band Load Design for SLAC”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO18, pp. 975-977.
[n] L. P. Yang, “Web-based Real time Database Access for BEPC II”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP114, pp. 898-900.
[n] A. Blednykh et al., “Microwave Instability Studies in NSLS-II”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 655-658. doi:10.18429/JACoW-NAPAC2016-WEA1CO05
[n] C. G. Limborg et al., “Comparison of PARMELA Simulations with Longitudinal Emittance Measurements at the SLAC Gun Test Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG022, pp. 3216-3218.
[n] F. A. DePaola, R. Faussete, S. K. Sharma, C. J. Spataro, A. K. Jain, and M. S. Jaski, “Mechanical Design Challenges Building a Prototype 8-Pole Corrector Magnet”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 50-52. doi:10.18429/JACoW-MEDSI2018-TUPH13
[n] B. S. Wang, Y.-C. Chien, Y. T. Li, C. Y. Liu, K.-B. Liu, and Y. S. Wong, “A Digtal Regulation Controller Prototype for the TPS Booster Power Supplies”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3570-3572. doi:10.18429/JACoW-IPAC2016-THPMW015
[n] L. R. Dalesio, “The Ground Test Accelerator Control System Database: Configuration, Run-Time Operation and Access”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1693-1695.
[n] Y. F. Sui, J. Cao, and L. Ma, “Wire Scanner for Transverse Beam Parameter Measurements in BEPCII”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC099, pp. 1293-1295.
[n] M. J. Barnes, O. Bjorkqvist, and K. Kodama, “Beam Induced Power Deposition in CERN SPS Injection Kickers”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3490-3493. doi:10.18429/JACoW-IPAC2021-WEPAB342
[n] D. Horan, A. Nassiri, and C. Schwartz, “Phase Loop Bandwidth Measurements on the Advanced Photon Source 352-MHz RF Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P017, pp. 3111-3113.
[n] A. Valentinov, A. Kadnikov, Y. Krylov, S. Kuznetsov, and Y. Yupinov, “Control System of the Synchrotron Radiation Source SIBERIA-2”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA04, pp. 2199-2201.
[n] A. C. Starritt, A. Pozar, and Y. E. Tan, “Orbit Feedback and Beam Stability at the Australian Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3805-3807. doi:10.18429/JACoW-IPAC2019-THPRB005
[n] C. Leemann, “CEBAF Design Overview and Project Status”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87A09, pp. XX-XX.
[n] H. Witte and J. S. Berg, “Quadrupole Magnet for a Rapid Cycling Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3428-3430. doi:10.18429/JACoW-IPAC2015-WEPTY065
[n] J.-Y. Raguin, I. Wilson, and W. Wuensch, “Progress in the Design of a Damped and Tapered Accelerating Structure for CLIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB003, pp. 2724-2726.
[n] G. A. Westenskow, F. M. Bieniosek, D. P. Grote, and J. W. Kwan, “A Multi-beamlet Injector for Heavy Ion Fusion: Experiments and Modeling”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRYAB01, pp. 3777-3781.
[n] S. Gustafsson and C. Pagani, “Effect and Control of the Dee to Dee Coupling Capacitances”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-11, pp. 370-373.
[n] F. D. Dziuba et al., “First Performance Test on the Superconducting 217 MHz CH Cavity at 4.2 K”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 953-955. doi:10.18429/JACoW-LINAC2016-THPLR044
[n] J. T. Maniscalco, D. Gonnella, D. L. Hall, P. N. Koufalis, and M. Liepe, “Pulsed Field Limits in SRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2341-2343. doi:10.18429/JACoW-IPAC2016-WEPMR030
[n] D. R. Douglas and A. J. Dragt, “MARYLIC:mystuff The Maryland Lie Algebraic Transport and Tracking Code”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2442-2445.
[n] E. L. Hoyt and E. L. Garwin, “Accelerator Vacuum Problems: In-Line Oil Trapping Between the Stanford Linear Accelerator and the Beam Switchyard”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 740-743.
[n] M. G. Billing, V. S. Aleksandrov, N. Yu. Kazarinov, E. A. Perelstein, and M. N. Sazonov, “The Simulation of the Beam Dynamics in the High Current Cornell Electron Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH016, pp. 2878-2880.
[n] J. S. Fraser, E. R. Gray, G. W. Rodenz, and R. L. Sheffield, “High-Brightness Photoemitter Injector for Electron Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1791-1794.
[n] P. Gayet, A. Juillerat, H. K. Kuhn, M. Rabany, and J. C. Wolles, “Experience with the Multi-Year Implementation of an Industrial Control System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B17, pp. 2432-2434.
[n] Y. Suetsugu, A. Morishige, Co. Ltd, K. Shibata, Y. Suzuki, and M. Tsuchiya, “Beam Test of a Movable Collimator (Mask) with Low Beam Impedance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD038, pp. 1511-1513.
[n] T. Nakamura et al., “Low Emittance Operation of the SPring-8 Storage Ring by Damping Partition Control”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH088, pp. 2665-2667.
[n] R. J. Dejus, M. S. Jaski, and S. Sasaki, “Spectral Performance of Circular Polarizing Quasi-Periodic Undulators for Soft X-Rays at the Advanced Photon Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP076, pp. 307-309.
[n] J. Irwin, “Computation of Lattice Maps Using Modular BCH and Similarity Composition Rules”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAC18, pp. 2871-2873.
[n] D. Einfeld et al., “Performance of the 800-MeV Injector for the BESSY Storage Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3103-3106.
[n] H. Ohkuma et al., “Beam-Performance Improvement of the SPring-8 Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB025, pp. 881-883.
[n] W. Bruns, “Error Sensitivity of a Double Side Coupled Muffin-Tin”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2107-2110.
[n] R. W. de Leeuw, J. I. M. Botman, H. L. Hagedoorn, C. J. Timmermans, G. A. Webers, and I. F. van Maanen, “A 10 MeV Injection Beam Transport Line for a Racetrack Microtron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2417-2420.
[n] A. M. Sessler, “Laser Accelerators”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3145-3150.
[n] J. Wei, “Stachastic Cooling with a Double RF System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 833-836.
[n] H. Weise, “The TESLA XFEL Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOYCH01, pp. 11-15.
[n] N. Sei, H. Ogawa, K. Yamada, and M. Y. Yasumoto, “Near-Infrared Free Electron Laser Experiment with the Storage Ring NIJI-IV”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH073, pp. 147-150.
[n] S. J. Smith et al., “2D-3D PIC Code Benchmarking/Anchoring Comparisons For a Novel RFQ/RFI LINAC Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1194-1197. doi:10.18429/JACoW-IPAC2018-TUPAL077
[n] A. Facco et al., “ISAC at TRIUMF: Recent Achievements and Future Goals”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD17, pp. 247-249.
[n] G. A. Westenskow, “Relativistic Klystron Two-Beam Accelerator Studies at the RTA Test Facility”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP29, pp. 393-395.
[n] T. Sakai et al., “Research and development of coherent terahertz sources at LEBRA linac, Nihon University”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 611-614. doi:10.18429/JACoW-LINAC2024-THAA006
[n] D. Brandt, “Lattice Modifications for the LEP Energy Upgrade”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 403-406.
[n] A. L. Romanov, I. Koop, E. Perevedentsev, and D. B. Shwartz, “Luminosity Estimation and Beam Phase Space Analysis at VEPP-2000”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA04, pp. 889-891.
[n] A. Enomoto, “Construction Status of the KEKB 8-GeV Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E202, pp. 292-294.
[n] C. Schwartz, J. Carwardine, and T. Fors, “A Localization Algorithm for Strong Sources of Orbit Motion in the APS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH078, pp. 1390-1392.
[n] A. Ijspeert and P. Sievers, “Recent Developments of Beam Dumps and Targets at the SPS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2841-2844.
[n] F. Blas and R. Garoby, “Design and Operational Results of a One-Turn-Delay Feedback" for Beam Loading Compensation of the CERN PS Ferrite Cavities"”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1398-1401.
[n] L. Thorndahl, “Multi-frequency Acceleration for the CLIC Drive Linac with Beam Loading and HOM Compensation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1138-1141.
[n] K. R. Kim, J.-H. Jang, M. H. Jung, S.-K. Lee, Y. M. Lee, and T. K. Yang, “Feasibility Studies on the In-Vivo Experiments at the MC-50 Cyclotron Using a Prototype LEPT System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP010, pp. 1312-1314.
[n] S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA01, pp. 906-909.
[n] R. Schmitz, “What's behind an Accelerator-Control-System?”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOMA04, pp. 13-15.
[n] B. A. Sobhani, “Video Compression for areaDetector”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1290-1290. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO36
[n] T. V. Zolkin, Y. Kharkov, I. A. Morozov, and S. Nagaitsev, “A Model Ring With Exactly Solvable Nonlinear Motion”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOODB2, pp. 78-80.
[n] betatron, cyclotron, extraction, field, target, “Control of Betatron Oscillations in a Cyclotron by Use of an On-Line-Computer”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1087-1091.
[n] N. Tokuda, S. Arai, T. Fukushima, T. Morimoto, and E. Tojyo, “Acceleration Performance of a 50-MHz Split Coaxial RFQ and the Design of a 25.5-MHz Prototype”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 938-941.
[n] L. Sch?ñchter, “Electron Cloud in the Region of Weak Vertical Field of the Wiggler”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD031, pp. 1994-1996.
[n] A. Fedotov, R. L. Gluckstern, I. Hofmann, and H. Okamoto, “Application of Envelope Instability to High-Intensity Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG002, pp. 2592-2594.
[n] J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities with Improved Properties”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP099, pp. 1021-1023.
[n] D. Bogard, J. L. Hamel, P. Hulin, and J. Payet, “A Versatile Multi Processed Control System for MIMAS”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1129-1132.
[n] Ya. V. Shashkov, A. A. Mitrofanov, N. P. Sobenin, and V. Zvyagintsev, “Higher Order Modes Damping for 9-cell Structure with Modified Drift Tubes”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC17, pp. 356-358.
[n] Z. XY. Guo, “Engineering Design and Fabricate Technology for Superconducting Magnets in Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper FRAO03, pp. 364-367. doi:10.18429/JACoW-CYCLOTRONS2022-FRAO03
[n] U. Becker, M. Zhang, and T. Weiland, “Two and Three Dimensional Simulations of Dark Current on TESLA-Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C07, pp. 397-401.
[n] D. Giove et al., “RF High Power Tests on the First Module of the ACLIP Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP075, pp. 4950-4952.
[n] G. P. Gallerano, A. Doria, E. Giovenale, G. Messina, I. P. Spassovsky, and C. R. Frascati, “Compact THz FELs and Their Potential in Biological Applications”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP032, pp. XX-XX.
[n] N. Ohuchi et al., “Design of the Superconducting Magnet System for the SuperKEKB Interaction Region”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEODA1, pp. 759-761.
[n] W. Singer, D. Proch, and A. Brinkmann, “Diagnostic of Defects in High Purity Niobium”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D07, pp. 850-863.
[n] L. Shang, W. Wang, J. Hong, Y. M. Lu, and Y. Zhang, “The Upgrading of HLS Linac Modulators”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU451, pp. 434-436.
[n] J. List et al., “High Power Coupler R&D for Superconducting CH-cavities”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 920-923. doi:10.18429/JACoW-LINAC2018-THPO107
[n] S. Berry, A. Bouygues, J. Drant, A. Gonzalez-Moreau, C. Madec, and C. Servouin, “Cobotisation of ESS Cryomodule Assembly at CEA”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 438-441. doi:10.18429/JACoW-SRF2023-TUPTB024
[n] C. N. Davids and D. Peterson, “A Compact High-Resolution Isobar Separator for the CARIBU Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP116, pp. 5050-5052.
[n] K. Prelec and Th. Sluyters, “A Pulsed Negative Hydrogen Source for Currents up to One Ampere”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1662-1665.
[n] E. Zimoch et al., “SwissFEL Control System - Overview, Status, and Lessons Learned”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 19-21. doi:10.18429/JACoW-ICALEPCS2017-MOAPL04
[n] R. E. Meller and M. A. Palmer, “Digital Tune Tracker for CESR”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP215, pp. 504-506.
[n] Z. Y. Yao et al., “ISAC-II Style QWR Cryomodule for VECC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPTEV008, pp..
For LaTeX
Use Complete Form
For BibTeX
References
- K. M. Nam, S. Shin, Y. Sohn, H. Jin, Y. Park, and M. Chung, “Analytic Phase-Space and Spectral Modeling of Amplitude-Dependent Resonance Island Dynamics Near the Third-Integer Resonance”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5631, this conference.
- L. Celona et al., “Design Issues of the Proton Source for the ESS Facility”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB076, pp. 1008-1010.
- S. Adam and M. Humbel, “Integration of Compute-Bound Tasks in the SIN Control System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-04, pp. 418-421.
- H. Tian, C. E. Reece, W. Sommer, O. Trofimova, and L. Zhao, “Analysis of the Topographic Transformation of Niobium Surfaces Under Controlled EP Conditions”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO081, pp. 422-425.
- C. R. Ader, M. L. Alvarez, J. S. Batko, R. Campos, M. W. McGee, and A. C. Watts, “Accelerator Vacuum Windows: A Review of Past Research and a Strategy for the Development of a New Design for Improved Safety and Longevity for Particle Accelerators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2237-2239.
- A. A. Litvinov, I. K. Sedlyarov, and A. G. Tribendis, “Set-up for Nb Surface Quality Checking Using HC3”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87F02, pp. XX-XX.
- M. Borland, “Tutorial on Accelerator-Based Light Sources”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOAS1, pp. 702-706.
- M. Alabau et al., “Effect of the Non-Linear Magnetic Fields on the Emittance Growth in the ATF Extraction Line”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP075, pp. 2670-2672.
- R. J. Steinhagen et al., “Results of the LHC Prototype Chromaticity Measurement System Studies in the CERN-SPS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC098, pp. 1290-1292.
- A. Penirschke, A. Angelovski, M. Hansli, R. Jakoby, and T. Mahn, “Development of a Modified Six-Port Discriminator for Precise Beam Position Measurements”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WECYB1, pp. 495-499.
- S. Sudo et al., “Large-scale Fusion Research System Integration Based on the Superconducting Large Helical Device and Plasma Simulator at NIFS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUD005, pp. 352-354.
- T. T. Arkan et al., “LCLS-II Cryomodules Production Experience and Lessons Learned at Fermilab”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 709-714.
- A. M. Opekunov, “Experimental Studies of Electron Beam Characteristics of High Power CW Resonance Accelerator”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 289-291.
- A. Van Ginneken and T. Borak, “Beamstop Experiment at 29.4 GeV”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 746-748.
- K. I. Kuzmenkov et al., “Production of Intense Metal Ion Beams at the DC-60 Cyclotron”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 504-506.
- A. N. Shein, “Prospects of Creating a Modern Resonance Electron Accelerator”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 295-297.
- I. V. Agapov and G. Geloni, “Towards Realistic Modelling of the FEL Radiation for the European XFEL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPEA006, pp. 1173-1175.
- P. J. Bryant, “AGILE, A Tool for Interactive Lattice Design”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B03, pp. 1357-1359.
- R. K. Jobe, M. J. Browne, M. Flores, N. Phinney, H. D. Schwarz, and J. C. Sheppard, “Computer Control of the Energy Output of a Klystron in the SLC”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 735-738.
- H. G. Blosser, M. M. Gordon, and D. A. Johnson, “Proposed Michigan State University Trans-uranic Accelerator Facility”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A06, pp. XX-XX.
- E. D. Hudson, “Oak Ridge Model Magnet Studies”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59B05, pp. 104-109.
- S. Rowan et al., “CSCM: EXPERIMENTAL AND SIMULATION RESULTS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3988-3990.
- W. X. Cheng, B. Bacha, Y. Hu, O. Singh, and H. Xu, “NSLS2 Visible Synchrotron Light Monitor Diagnostic Beamline Commissioning”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPF21, pp. 369-373.
- T. M. Putman, R. A. Jameson, and T. M. Schultheis, “Application of a Digital Computer to the Control and Monitoring of a Proton Linear Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 21-27.
- J. J. Espinosa, J. F. Cardona, and D. C, “Non Linear Space Charge Effects on Transverse Beam Stability”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN011, pp. 3247-3249.
- C. Liu et al., “Transverse Beam Emittance Measurements with Multi-Slit and Moving-Slit Devices for LEReC”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 486-489.
- R. M. Lill, J. T. Collins, G. Decker, L. Erwin, J. Z. Xu, and B. X. Yang, “Studies of APS Storage Ring Vacuum Chamber Thermal Mechanical Effects and their Impact on Beam Stability”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM050, pp. 265-268.
- R. L. Warnock and J. C. Bergstrom, “Coherent Radiation in Whispering Gallery Modes”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP119, pp. 1710-1712.
- J. K. Pozimski et al., “PAMELA - A Model for an FFAG based Hadron Therapy Machine”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN076, pp. 2880-2882.
- D. W. Reid, “RF Power Sources for 1990 and Beyond”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO2-3, pp. 29-32.
- S. Franke et al., “Integration of the Moment-Based Beam-Dynamics Simulation Tool V-Code into the S-DALINAC Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN002, pp. 235-238.
- P. Jain, D. P. Chakravarthy, A. K. Ray, and P. Roychowdhury, “Inhomogenous Field Wien Filter Design”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA014, pp. 354-356.
- L. Dallin et al., “Canadian Light Source Status and Commissioning Results”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF007, pp. 2269-2271.
- M. Huck et al., “Experimental Characterization of the Coherent Harmonic Generation Source at the DELTA Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA005, pp. 2132-2134.
- C. Schmidt, R. Noble, J. Palkovic, and F. Mills, “Redesign of the Low Energy Section of the Fermilab Linac to Improve Beam Brightness”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-56, pp. 188-189.
- Z. Geng, V. Ayvazyan, and S. Simrock, “Architecture Design of the Application Software for the Low-Level RF Control System of the Free-Electron Laser at Hamburg”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS010, pp. 798-800.
- R. P. Fliller et al., “Beam Transport and Diagnostics for the NSLS-II Injection System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP006, pp. 1096-1098.
- P. J. Chou, H.-P. Chang, C.-C. Kuo, and W. T. Liu, “Design Status of Transfer Lines in TPS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP002, pp. 2261-2263.
- Z. Shahriari, G. A. Dumont, and K. Fong, “Norm-optimal Iterative Learning Control to Cancel Beam Loading Effect on the Accelerating Field”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3824-3826.
- F. Sakamoto et al., “Development of the High Resolution Electron Beam Profile Monitor for Medical Use X-Band Linac”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11020, pp. XX-XX.
- M. Sawamura et al., “Fabrication of Superconducting Spoke Cavity for Laser Compton Scattered Photon Sources”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2177-2179.
- J. I. M. Botman, H. L. Hagedoorn, R. J. W. Stas, and R. W. de Leeuw, “Orbit Dynamics in a Low Energy Electron Linear Accelerator”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP045L, pp. 944-946.
- A. Zholents et al., “A Collinear Wakefield Accelerator for a High Repetition Rate Multi-beamline Soft X-ray FEL Facility”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper FRB02, pp. 993-998.
- E. Traykov, T. Adam, E. Bouquerel, and C. Maazouzi, “Development of mass-dependent focusing techniques in quadrupole mass filters”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4065, this conference.
- M. Rosing and W. Gai, “The Transverse Forces in Wakefield Accelerators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 243-246.
- V. A. Verzilov, “Progress with Low Intensity Diagnostics at ISAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD081, pp. 885-887.
- C. S. Chen, K. T. Hsu, K. H. Hu, S. H. Lee, T. S. Ueng, and C. J. Wang, “Control Interface of New White Circuit for SRRC 1.5 GeV Booster Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B19, pp. 1838-1840.
- Y. Li, Z. P. Li, W. B. Liu, and J. Peng, “XAL Applications Development for CSNS Transport Lines”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 98-100.
- L. Zhang, S. An, Y.-S. Cho, Y. M. Li, and Y. Z. Tang, “Control System for a PEFP FPC Baking System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP166, pp. 940-942.
- O. I. Meshkov et al., “Experimental Comparison of Performance of Various Fluorescent Screens Applied for Relativistic Electron/Positron Beam Imaging”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper WEOB02, pp. 558-560.
- E. Nebot Del Busto et al., “Measurement of Beam Losses Using Optical Fibers at the Australian Synchrotron”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WECZB3, pp. 515-520.
- P. J. S. Barratt et al., “High Stability Operation of the ISIS Pulsed Spallation Neutron Source at 200 micro-A”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP094G, pp. 584-586.
- P. R. Hanley, A. W. Haberl, and A. Taylor, “Water Cooled Targets for Intense Ion Beams”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 933-938.
- R. Tarkeshian et al., “Conceptual Ideas for the Temporal Overlap of the Electron Beam and the Seed Laser for sFLASH”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH051, pp. 363-366.
- M. L. Neubauer, A. Dudas, and A. Krasnykh, “S-Band Load Design for SLAC”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO18, pp. 975-977.
- L. P. Yang, “Web-based Real time Database Access for BEPC II”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP114, pp. 898-900.
- A. Blednykh et al., “Microwave Instability Studies in NSLS-II”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 655-658.
- C. G. Limborg et al., “Comparison of PARMELA Simulations with Longitudinal Emittance Measurements at the SLAC Gun Test Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG022, pp. 3216-3218.
- F. A. DePaola, R. Faussete, S. K. Sharma, C. J. Spataro, A. K. Jain, and M. S. Jaski, “Mechanical Design Challenges Building a Prototype 8-Pole Corrector Magnet”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 50-52.
- B. S. Wang, Y.-C. Chien, Y. T. Li, C. Y. Liu, K.-B. Liu, and Y. S. Wong, “A Digtal Regulation Controller Prototype for the TPS Booster Power Supplies”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3570-3572.
- L. R. Dalesio, “The Ground Test Accelerator Control System Database: Configuration, Run-Time Operation and Access”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1693-1695.
- Y. F. Sui, J. Cao, and L. Ma, “Wire Scanner for Transverse Beam Parameter Measurements in BEPCII”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC099, pp. 1293-1295.
- M. J. Barnes, O. Bjorkqvist, and K. Kodama, “Beam Induced Power Deposition in CERN SPS Injection Kickers”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3490-3493.
- D. Horan, A. Nassiri, and C. Schwartz, “Phase Loop Bandwidth Measurements on the Advanced Photon Source 352-MHz RF Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P017, pp. 3111-3113.
- A. Valentinov, A. Kadnikov, Y. Krylov, S. Kuznetsov, and Y. Yupinov, “Control System of the Synchrotron Radiation Source SIBERIA-2”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA04, pp. 2199-2201.
- A. C. Starritt, A. Pozar, and Y. E. Tan, “Orbit Feedback and Beam Stability at the Australian Synchrotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3805-3807.
- C. Leemann, “CEBAF Design Overview and Project Status”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87A09, pp. XX-XX.
- H. Witte and J. S. Berg, “Quadrupole Magnet for a Rapid Cycling Synchrotron”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3428-3430.
- J.-Y. Raguin, I. Wilson, and W. Wuensch, “Progress in the Design of a Damped and Tapered Accelerating Structure for CLIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB003, pp. 2724-2726.
- G. A. Westenskow, F. M. Bieniosek, D. P. Grote, and J. W. Kwan, “A Multi-beamlet Injector for Heavy Ion Fusion: Experiments and Modeling”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRYAB01, pp. 3777-3781.
- S. Gustafsson and C. Pagani, “Effect and Control of the Dee to Dee Coupling Capacitances”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-11, pp. 370-373.
- F. D. Dziuba et al., “First Performance Test on the Superconducting 217 MHz CH Cavity at 4.2 K”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 953-955.
- J. T. Maniscalco, D. Gonnella, D. L. Hall, P. N. Koufalis, and M. Liepe, “Pulsed Field Limits in SRF Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2341-2343.
- D. R. Douglas and A. J. Dragt, “MARYLIC:mystuff The Maryland Lie Algebraic Transport and Tracking Code”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2442-2445.
- E. L. Hoyt and E. L. Garwin, “Accelerator Vacuum Problems: In-Line Oil Trapping Between the Stanford Linear Accelerator and the Beam Switchyard”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 740-743.
- M. G. Billing, V. S. Aleksandrov, N. Yu. Kazarinov, E. A. Perelstein, and M. N. Sazonov, “The Simulation of the Beam Dynamics in the High Current Cornell Electron Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH016, pp. 2878-2880.
- J. S. Fraser, E. R. Gray, G. W. Rodenz, and R. L. Sheffield, “High-Brightness Photoemitter Injector for Electron Accelerators”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1791-1794.
- P. Gayet, A. Juillerat, H. K. Kuhn, M. Rabany, and J. C. Wolles, “Experience with the Multi-Year Implementation of an Industrial Control System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B17, pp. 2432-2434.
- Y. Suetsugu, A. Morishige, Co. Ltd, K. Shibata, Y. Suzuki, and M. Tsuchiya, “Beam Test of a Movable Collimator (Mask) with Low Beam Impedance”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD038, pp. 1511-1513.
- T. Nakamura et al., “Low Emittance Operation of the SPring-8 Storage Ring by Damping Partition Control”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH088, pp. 2665-2667.
- R. J. Dejus, M. S. Jaski, and S. Sasaki, “Spectral Performance of Circular Polarizing Quasi-Periodic Undulators for Soft X-Rays at the Advanced Photon Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP076, pp. 307-309.
- J. Irwin, “Computation of Lattice Maps Using Modular BCH and Similarity Composition Rules”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAC18, pp. 2871-2873.
- D. Einfeld et al., “Performance of the 800-MeV Injector for the BESSY Storage Ring”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3103-3106.
- H. Ohkuma et al., “Beam-Performance Improvement of the SPring-8 Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB025, pp. 881-883.
- W. Bruns, “Error Sensitivity of a Double Side Coupled Muffin-Tin”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2107-2110.
- R. W. de Leeuw, J. I. M. Botman, H. L. Hagedoorn, C. J. Timmermans, G. A. Webers, and I. F. van Maanen, “A 10 MeV Injection Beam Transport Line for a Racetrack Microtron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2417-2420.
- A. M. Sessler, “Laser Accelerators”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3145-3150.
- J. Wei, “Stachastic Cooling with a Double RF System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 833-836.
- H. Weise, “The TESLA XFEL Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOYCH01, pp. 11-15.
- N. Sei, H. Ogawa, K. Yamada, and M. Y. Yasumoto, “Near-Infrared Free Electron Laser Experiment with the Storage Ring NIJI-IV”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH073, pp. 147-150.
- S. J. Smith et al., “2D-3D PIC Code Benchmarking/Anchoring Comparisons For a Novel RFQ/RFI LINAC Design”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1194-1197.
- A. Facco et al., “ISAC at TRIUMF: Recent Achievements and Future Goals”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOD17, pp. 247-249.
- G. A. Westenskow, “Relativistic Klystron Two-Beam Accelerator Studies at the RTA Test Facility”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP29, pp. 393-395.
- T. Sakai et al., “Research and development of coherent terahertz sources at LEBRA linac, Nihon University”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 611-614.
- D. Brandt, “Lattice Modifications for the LEP Energy Upgrade”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 403-406.
- A. L. Romanov, I. Koop, E. Perevedentsev, and D. B. Shwartz, “Luminosity Estimation and Beam Phase Space Analysis at VEPP-2000”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA04, pp. 889-891.
- A. Enomoto, “Construction Status of the KEKB 8-GeV Injector Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E202, pp. 292-294.
- C. Schwartz, J. Carwardine, and T. Fors, “A Localization Algorithm for Strong Sources of Orbit Motion in the APS Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH078, pp. 1390-1392.
- A. Ijspeert and P. Sievers, “Recent Developments of Beam Dumps and Targets at the SPS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2841-2844.
- F. Blas and R. Garoby, “Design and Operational Results of a One-Turn-Delay Feedback" for Beam Loading Compensation of the CERN PS Ferrite Cavities"”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1398-1401.
- L. Thorndahl, “Multi-frequency Acceleration for the CLIC Drive Linac with Beam Loading and HOM Compensation”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1138-1141.
- K. R. Kim, J.-H. Jang, M. H. Jung, S.-K. Lee, Y. M. Lee, and T. K. Yang, “Feasibility Studies on the In-Vivo Experiments at the MC-50 Cyclotron Using a Prototype LEPT System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP010, pp. 1312-1314.
- S. Karstensen, M. E. Castro Carballo, J. M. J?ñger, and M. Staack, “XFEL Machine Protection System (MPS) Based on uTCA”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA01, pp. 906-909.
- R. Schmitz, “What's behind an Accelerator-Control-System?”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WECOMA04, pp. 13-15.
- B. A. Sobhani, “Video Compression for areaDetector”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO36, pp. 1290-1290.
- T. V. Zolkin, Y. Kharkov, I. A. Morozov, and S. Nagaitsev, “A Model Ring With Exactly Solvable Nonlinear Motion”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOODB2, pp. 78-80.
- betatron, cyclotron, extraction, field, target, “Control of Betatron Oscillations in a Cyclotron by Use of an On-Line-Computer”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1087-1091.
- N. Tokuda, S. Arai, T. Fukushima, T. Morimoto, and E. Tojyo, “Acceleration Performance of a 50-MHz Split Coaxial RFQ and the Design of a 25.5-MHz Prototype”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 938-941.
- L. Sch?ñchter, “Electron Cloud in the Region of Weak Vertical Field of the Wiggler”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD031, pp. 1994-1996.
- A. Fedotov, R. L. Gluckstern, I. Hofmann, and H. Okamoto, “Application of Envelope Instability to High-Intensity Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG002, pp. 2592-2594.
- J. R. Delayen and S. U. De Silva, “Design of Superconducting Parallel-bar Deflecting/Crabbing Cavities with Improved Properties”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP099, pp. 1021-1023.
- D. Bogard, J. L. Hamel, P. Hulin, and J. Payet, “A Versatile Multi Processed Control System for MIMAS”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1129-1132.
- Ya. V. Shashkov, A. A. Mitrofanov, N. P. Sobenin, and V. Zvyagintsev, “Higher Order Modes Damping for 9-cell Structure with Modified Drift Tubes”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC17, pp. 356-358.
- Z. XY. Guo, “Engineering Design and Fabricate Technology for Superconducting Magnets in Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper FRAO03, pp. 364-367.
- U. Becker, M. Zhang, and T. Weiland, “Two and Three Dimensional Simulations of Dark Current on TESLA-Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C07, pp. 397-401.
- D. Giove et al., “RF High Power Tests on the First Module of the ACLIP Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP075, pp. 4950-4952.
- G. P. Gallerano, A. Doria, E. Giovenale, G. Messina, I. P. Spassovsky, and C. R. Frascati, “Compact THz FELs and Their Potential in Biological Applications”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP032, pp. XX-XX.
- N. Ohuchi et al., “Design of the Superconducting Magnet System for the SuperKEKB Interaction Region”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEODA1, pp. 759-761.
- W. Singer, D. Proch, and A. Brinkmann, “Diagnostic of Defects in High Purity Niobium”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D07, pp. 850-863.
- L. Shang, W. Wang, J. Hong, Y. M. Lu, and Y. Zhang, “The Upgrading of HLS Linac Modulators”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU451, pp. 434-436.
- J. List et al., “High Power Coupler R&D for Superconducting CH-cavities”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 920-923.
- S. Berry, A. Bouygues, J. Drant, A. Gonzalez-Moreau, C. Madec, and C. Servouin, “Cobotisation of ESS Cryomodule Assembly at CEA”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB024, pp. 438-441.
- C. N. Davids and D. Peterson, “A Compact High-Resolution Isobar Separator for the CARIBU Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP116, pp. 5050-5052.
- K. Prelec and Th. Sluyters, “A Pulsed Negative Hydrogen Source for Currents up to One Ampere”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1662-1665.
- E. Zimoch et al., “SwissFEL Control System - Overview, Status, and Lessons Learned”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 19-21.
- R. E. Meller and M. A. Palmer, “Digital Tune Tracker for CESR”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP215, pp. 504-506.
- Z. Y. Yao et al., “ISAC-II Style QWR Cryomodule for VECC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPTEV008, pp..
Back to search