JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	V. Zvyagintsev et al., “DEVELOPMENT, PRODUCTION AND TESTS OF PROTOTYPE SUPERCONDUCTING CAVITIES FOR THE HIGH BETA SECTION OF THE ISAC-II HEAVY ION ACCELERATOR AT TRIUMF”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEDAU01, pp. XX-XX. 
[n]	A. H. Ninane, J. L. Martou, M. Nemry, and F. Somers, “A VMEbus General-Purpose Data Acquisition System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 265-268. doi:10.18429/JACoW-ICALEPCS1991-S06SA05
[n]	C. Contreras-Martinez et al., “PI Loop Resonance Control for the Dark Photon Experiment at 2 K using a 2.6 GHz SRF cavity”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 847-851. doi:10.18429/JACoW-SRF2023-WEPWB109
[n]	G. Rakowsky, B. Bobbs, J. Brown, P. Kennedy, and G. Swoyer, “Performance of Rocketdyne Phase-optimized Pure Permanent Magnet Undulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2733-2736. 
[n]	M. T. Switka, K. Desch, T. J. Gereons, S. Kronenberg, D. Proft, and A. Spreitzer, “Progress on Distributed Image Analysis from Digital Cameras at ELSA using the RabbitMQ Message Broker”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 449-452. doi:10.18429/JACoW-IBIC2023-WEP046
[n]	M. P. Howell et al., “Status of Spallation Neutron Source Cryogenic Test Facility (CTF)”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA28, pp. 1292-1294. 
[n]	P. Baxevanis, Z. Huang, and R. D. Ruth, “A General Method for Analyzing 3-D Effects in FEL Amplifiers”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD22, pp. 81-84. 
[n]	M. Akhyani, M. Eshraqi, and S. Fatehi, “Design of a Low-Frequency Proton Extraction Line for High-Pulsed Magnetic Field Neutron Scattering at ESS”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4051, unpublished. 
[n]	L. Trevisan et al., “Final Design of Control and Data Acquisition System for the ITER Heating Neutral Beam Injector Test Bed”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 612-616. doi:10.18429/JACoW-ICALEPCS2023-TUPDP043
[n]	J. Smolucha, A. R. Franck, S. L. Lackey, and K. Seino, “A New Architecture for Fermilab’s Cryogenic Control System”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 96-99. doi:10.18429/JACoW-ICALEPCS1991-S02SRU11
[n]	R. Lorenz, “Beam Position Monitors in the TESLA Test Facility Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC14, pp. 2631-2633. 
[n]	S. Miller et al., “Optimization of a mini-channel beam dump for FRIB operation”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 125-128. doi:10.18429/JACoW-HIAT2025-TUP01
[n]	S. Proskin, A. Amoroso, A. Anderton, M. Hu, R. LaFave, and A. Mishin, “New linac designs by High Energy Sources R&D Group at Varex Imaging”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1050-1052. doi:10.18429/JACoW-IPAC2025-TUPB037
[n]	S. Keckert, R. Kleindienst, J. Knobloch, and O. Kugeler, “Design and First Measurements of an Alternative Calorimetry Chamber for the HZB Quadrupole Resonator”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB067, pp. 739-743. 
[n]	D. Gorelov et al., “LANSCE Accelerator Modernisation Project Studies at LANL”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL134, unpublished. 
[n]	H. Hayano et al., “Diagnosis of the Low Emittance Beam in ATF DR Extraction Line”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP09H, pp. 466-468. 
[n]	A. D. Yeremian, R. H. Miller, and J. W. Wang, “Next Linear Collider Test Accelerator Injector Design and Status (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-18, pp. 89-91. 
[n]	R. W. Hamm, D. W. Mueller, and R. G. Sturgess, “A 30-kV Proton Injector for PIGMI”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H17, pp. 309-312. 
[n]	V. V. Shirokov et al., “Compact Tandem Accelerator Based Neutron Source for the Medicine”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT121, pp. 1422-1424. 
[n]	H. Gong et al., “A new rf design of the two-mode transverse deflecting structure”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1983-1986. doi:10.18429/JACoW-IPAC2024-WEPC14
[n]	A. Berges, B. Fishler, C. Pino, J. Joshi, M. Britton, and T. Johnson, “The LCLS-II modular optical delivery system: lessons learned”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1533-1537. doi:10.18429/JACoW-ICALEPCS2025-THMR005
[n]	M. Saifulin et al., “ZnO(In) Scintillation Light Spectra Investigation for Heavy Ion Detector Application”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 294-295. doi:10.18429/JACoW-IBIC2022-TUP29
[n]	S. Wohl et al., “BL31-FaXToR, hard X-ray micro-tomography and radiography at  ALBA: current status and ongoing improvements”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1670-1674. doi:10.18429/JACoW-ICALEPCS2025-THPD039
[n]	T. Limberg, Ph. Piot, and F. Stulle, “Design and Performance Simulation of the TTF-FEL II Bunch Compression System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI049, pp. 811-813. 
[n]	D. Todd et al., “High intensity Ti-50 beam production for superheavy element research”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 207-210. doi:10.18429/JACoW-HIAT2025-WEY02
[n]	H. Witte et al., “Test magnet for the EIC Rapid Cycling Synchrotron”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1517-1519. doi:10.18429/JACoW-IPAC2024-TUPR45
[n]	S.-H. Jeong et al., “Programmable Power Supply for AC Switching Magnet of Proton Accelerator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE060, pp. 3508-3510. 
[n]	P. Van Trappen et al., “SPS Beam Dump System (SBDS) Commissioning After Relocation and Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2530-2532. doi:10.18429/JACoW-IPAC2022-THPOST039
[n]	I. Chernyavskiy, A. Vlasov, and T. Antonsen, “Modeling of single-beam and multiple-beam klystrons by the TESLA-family of large-signal codes”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR34, unpublished. 
[n]	M. Ruprecht, P. Goslawski, F. Kramer, and M. Ries, “Compensation of Transient Beam Loading with Detuned Cavities at BESSY II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3056-3058. doi:10.18429/JACoW-IPAC2017-WEPIK056
[n]	A. Vnuchenko et al., “Preliminary Simulation of CERNÔÇÖs Linac4 H? Source Beam Formation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2947-2950. doi:10.18429/JACoW-IPAC2021-WEPAB141
[n]	J. Tamura, Y. Kondo, T. Morishita, F. Naito, and M. Otani, “Acceleration Efficiency of TE-Mode Structures for Proton Linacs”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 177-179. doi:10.18429/JACoW-LINAC2022-MOPOGE13

For LaTeX

Use Complete Form

For BibTeX

References

Back to search