Warning
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] M. P. Kelly, “High-Performance SC Cryomodule for CW Ion Accelerators”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TU304, pp. 387-391.
[n] H. Lippek et al., “MTCA.4-based clock and timing distribution for PETRA IV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4115-4118. doi:10.18429/JACoW-IPAC2023-THPA065
[n] G. Bisoffi et al., “First Operation of PIAVE, the Heavy Ion Injector Based on Superconducting RFQ's”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE040, pp. 2621-2623.
[n] M. A. Allen and R. A. McConnell, “Operation of the Spear RF System”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 373-378.
[n] G. A. Krafft and M. G. Tiefenback, “Compensation of RF-Induced Energy Spread in the CEBAF Injector Chopping System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 426-429.
[n] W. Assmann et al., “Tritron Progress Report”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper B-06, pp. 47-50.
[n] X. Yang et al., “High-precision characterization of MeV electron interactions for advanced nano-imaging of thick biological samples and microchips”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper FRAN02, unpublished.
[n] R. Ferdinand, N. Pichoff, R. Duperrier, and J-M. Lagniel, “TOUTATIS, the CEA/Saclay RFQ Code”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB19, pp. 839-841.
[n] M. Slodkowski and A. Dysko, “Managing shifts in the NA61/SHINE experiment: development of the shift scheduler system”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1814-1819. doi:10.18429/JACoW-ICALEPCS2025-THPD096
[n] E. Cenni, G. Devanz, O. Piquet, and P. Bosland, “Gamma diagnostic development for ESS cryomodule prototypes in CEA Saclay”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA142, unpublished.
[n] P. A. Schmelzbach et al., “Steps Towards a 3 mA, 1.8 MW Proton Beam at the PSI Cyclotron Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE035, pp. 2405-2406.
[n] K. Dewhurst, C. Maccani, M. D'Andrea, P. Hermes, D. Mirarchi, and S. Redaelli, “Predicting the multi-turn channelling efficiency of a 7 mrad-bending silicon crystal in the Large Hadron Collider for TeV-range proton energies”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1144-1147. doi:10.18429/JACoW-IPAC2024-TUPC64
[n] C. S. Simon et al., “New Electronics Design for the European XFEL Re-entrant Cavity Monitor”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA15, pp. 83-86.
[n] M. J. Barnes and G. D. Wait, “Algorithm for the Deflector Plates of the 1 MHz Chopper for the Kaon Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2883-2886.
[n] K. Bongardt, A. P. Letchford, M. Pabst, V. G. Vaccaro, and L. Verolino, “Filamentation Effects and Image Charges in High Beta Proton Transfer Lines”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP065L, pp. 1224-1226.
[n] A. Chabert et al., “Superconducting Booster Cyclotron Studies at GANIL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2802-2805.
[n] D. Reschke, “Infrastructure, Methods and Test Results for the Testing of 800 Series Cavities for the European XFEL”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THIOA01, pp. 812-815.
[n] J. Hirschman et al., “High-throughput, low-latency X-ray characterization for attosecond XFEL diagnostics: A heterogeneous approach”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOP046, unpublished.
[n] M. Kyprianidis, V. Baglin, G. Bregliozzi, and G. Cattenoz, “Vacuum tolerance limits for LSS7: balancing performance and radiation exposure”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7108, unpublished.
[n] F. Armborst et al., “Initial user operation of SLS 2.0”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2014, unpublished.
[n] O. Azzolini et al., “Metal Additive Manufacturing for Accelerator Technologies (MAAT project at INFN)”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7182, unpublished.
[n] B. Surrow, A. Deshpande, and J. Pasukonis, “eRHIC Detector Design Studies - Implications and Constraints on the ep(A) Interaction-Region Design”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP049, pp. 3043-3045.
[n] M. Valette, K. Drees, C. Hetzel, G. Robert-Demolaize, J. Bellon, and B. Bhandari, “Electron Storage Ring Collimation and Abort System design for the Electron Ion Collider”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA050, unpublished.
[n] W. T. Weng, “Operation of the Brookhaven AGS with the Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3726-3731.
[n] H. Ao et al., “High Power Conditioning of Annular-Ring Coupled Structures for the J-PARC Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP089, pp. 1053-1055.
[n] S. M. Khan, M. Gehlot, H. Jeevakhan, and G. Mishra, “Hall Probe Magnetic Measurement of 50 mm Period PPM Undulator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2744-2746. doi:10.18429/JACoW-IPAC2022-THPOPT064
[n] S. Saadat, M. Boland, and P. Kallakuri, “Multimethod signal processing for comprehensive tune coupling characterization at Canadian Light Source”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2909-2912. doi:10.18429/JACoW-IPAC2025-THPM106
[n] I. A. Morozov, P. A. Piminov, and I. S. Yakimov, “Precise Analysis of Beam Optics at the VEPP-4M by Turn-by-Turn Betatron Phase Advance Measurement”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 79-81. doi:10.18429/JACoW-RuPAC2021-WED04
[n] V. Kamerdzhiev et al., “Beam Instrumentation for the COSY Electron Cooler”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB48, pp. 468-470.
[n] E. C. Raka, “Measurement of the Linear Coupling in the Brookhaven AGS”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1938-1941.
[n] C. C. Jensen, “A 40 kV, 3.1 $Omega$ PFN for the Main Injector Abort Kicker”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P084, pp. 1284-1286.
[n] J. Seeman et al., “A Single Beam Multibunch Instability at CESR”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2561-2563.
[n] Z. Ni, L. Li, J. Liu, J. Luo, and X. Zhou, “Design of a Component-Oriented Distributed Data Integration Model”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 202-205. doi:10.18429/JACoW-ICALEPCS2021-MOPV032
[n] F. Jafari and O. Meusel, “Confinement of Electron Clouds in a Bending Magnet”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4055, unpublished.
[n] H. Rafique, R. B. Appleby, J. L. Abelleira, A. M. Krainer, and A. Langner, “Proton Cross-Talk and Losses in the Dispersion Suppressor Regions at the FCC-hh”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1763-1765. doi:10.18429/JACoW-IPAC2017-TUPIK037
[n] H. Tian and C. E. Reece, “Evaluation of the Diffusion Coefficient of Fluorine during the Electropolishing of Niobium”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO060, pp. 738-741.
[n] M. Kireeff Covo et al., “Vacuum Electron Devices in the 88-Inch Cyclotron”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 154-156. doi:10.18429/JACoW-NAPAC2022-MOPA45
[n] F. Naito, “The JAERI/KEK Joint Project and Its Performance”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH102, pp. 564-568.
[n] M. Han, Y. Lu, and Z. Wang, “Design and optimization of water-cooling scheme for a 162.5 MHz three-gap rebuncher cavity”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS097, unpublished.
[n] T. Kanemura et al., “High power targetry devices at FRIB: challenges, status and plan”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 20-25. doi:10.18429/JACoW-HIAT2025-MOZ03
[n] R. Veness et al., “Installation and Test of Pre-series Wire Scanners for the LHC Injector Upgrade Project at CERN”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 412-414. doi:10.18429/JACoW-IPAC2017-MOPAB121
[n] F. Havart et al., “Building on experience: renovation of the SNIFFER gas and fire protection system for the LHC experiments”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1595-1600. doi:10.18429/JACoW-ICALEPCS2025-THPD014
[n] K. T. Son, K. Seol, S. Bae, D. Y. Lee, and H. J. Kim, “Status and performance of 150 kW RF solid state power amplifiers for the RFQ cavity”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB046, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- M. P. Kelly, “High-Performance SC Cryomodule for CW Ion Accelerators”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TU304, pp. 387-391.
- H. Lippek et al., “MTCA.4-based clock and timing distribution for PETRA IV”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA065, pp. 4115-4118.
- G. Bisoffi et al., “First Operation of PIAVE, the Heavy Ion Injector Based on Superconducting RFQ's”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE040, pp. 2621-2623.
- M. A. Allen and R. A. McConnell, “Operation of the Spear RF System”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 373-378.
- G. A. Krafft and M. G. Tiefenback, “Compensation of RF-Induced Energy Spread in the CEBAF Injector Chopping System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 426-429.
- W. Assmann et al., “Tritron Progress Report”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper B-06, pp. 47-50.
- X. Yang et al., “High-precision characterization of MeV electron interactions for advanced nano-imaging of thick biological samples and microchips”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper FRAN02, unpublished.
- R. Ferdinand, N. Pichoff, R. Duperrier, and J-M. Lagniel, “TOUTATIS, the CEA/Saclay RFQ Code”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THB19, pp. 839-841.
- M. Slodkowski and A. Dysko, “Managing shifts in the NA61/SHINE experiment: development of the shift scheduler system”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1814-1819.
- E. Cenni, G. Devanz, O. Piquet, and P. Bosland, “Gamma diagnostic development for ESS cryomodule prototypes in CEA Saclay”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA142, unpublished.
- P. A. Schmelzbach et al., “Steps Towards a 3 mA, 1.8 MW Proton Beam at the PSI Cyclotron Facility”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE035, pp. 2405-2406.
- K. Dewhurst, C. Maccani, M. D'Andrea, P. Hermes, D. Mirarchi, and S. Redaelli, “Predicting the multi-turn channelling efficiency of a 7 mrad-bending silicon crystal in the Large Hadron Collider for TeV-range proton energies”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC64, pp. 1144-1147.
- C. S. Simon et al., “New Electronics Design for the European XFEL Re-entrant Cavity Monitor”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA15, pp. 83-86.
- M. J. Barnes and G. D. Wait, “Algorithm for the Deflector Plates of the 1 MHz Chopper for the Kaon Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2883-2886.
- K. Bongardt, A. P. Letchford, M. Pabst, V. G. Vaccaro, and L. Verolino, “Filamentation Effects and Image Charges in High Beta Proton Transfer Lines”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP065L, pp. 1224-1226.
- A. Chabert et al., “Superconducting Booster Cyclotron Studies at GANIL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2802-2805.
- D. Reschke, “Infrastructure, Methods and Test Results for the Testing of 800 Series Cavities for the European XFEL”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THIOA01, pp. 812-815.
- J. Hirschman et al., “High-throughput, low-latency X-ray characterization for attosecond XFEL diagnostics: A heterogeneous approach”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper MOP046, unpublished.
- M. Kyprianidis, V. Baglin, G. Bregliozzi, and G. Cattenoz, “Vacuum tolerance limits for LSS7: balancing performance and radiation exposure”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7108, this conference.
- F. Armborst et al., “Initial user operation of SLS 2.0”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2014, this conference.
- O. Azzolini et al., “Metal Additive Manufacturing for Accelerator Technologies (MAAT project at INFN)”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7182, this conference.
- B. Surrow, A. Deshpande, and J. Pasukonis, “eRHIC Detector Design Studies - Implications and Constraints on the ep(A) Interaction-Region Design”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP049, pp. 3043-3045.
- M. Valette, K. Drees, C. Hetzel, G. Robert-Demolaize, J. Bellon, and B. Bhandari, “Electron Storage Ring Collimation and Abort System design for the Electron Ion Collider”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA050, unpublished.
- W. T. Weng, “Operation of the Brookhaven AGS with the Booster”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3726-3731.
- H. Ao et al., “High Power Conditioning of Annular-Ring Coupled Structures for the J-PARC Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP089, pp. 1053-1055.
- S. M. Khan, M. Gehlot, H. Jeevakhan, and G. Mishra, “Hall Probe Magnetic Measurement of 50 mm Period PPM Undulator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2744-2746.
- S. Saadat, M. Boland, and P. Kallakuri, “Multimethod signal processing for comprehensive tune coupling characterization at Canadian Light Source”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM106, pp. 2909-2912.
- I. A. Morozov, P. A. Piminov, and I. S. Yakimov, “Precise Analysis of Beam Optics at the VEPP-4M by Turn-by-Turn Betatron Phase Advance Measurement”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 79-81.
- V. Kamerdzhiev et al., “Beam Instrumentation for the COSY Electron Cooler”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPB48, pp. 468-470.
- E. C. Raka, “Measurement of the Linear Coupling in the Brookhaven AGS”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1938-1941.
- C. C. Jensen, “A 40 kV, 3.1 $Omega$ PFN for the Main Injector Abort Kicker”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P084, pp. 1284-1286.
- J. Seeman et al., “A Single Beam Multibunch Instability at CESR”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2561-2563.
- Z. Ni, L. Li, J. Liu, J. Luo, and X. Zhou, “Design of a Component-Oriented Distributed Data Integration Model”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 202-205.
- F. Jafari and O. Meusel, “Confinement of Electron Clouds in a Bending Magnet”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4055, this conference.
- H. Rafique, R. B. Appleby, J. L. Abelleira, A. M. Krainer, and A. Langner, “Proton Cross-Talk and Losses in the Dispersion Suppressor Regions at the FCC-hh”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1763-1765.
- H. Tian and C. E. Reece, “Evaluation of the Diffusion Coefficient of Fluorine during the Electropolishing of Niobium”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO060, pp. 738-741.
- M. Kireeff Covo et al., “Vacuum Electron Devices in the 88-Inch Cyclotron”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 154-156.
- F. Naito, “The JAERI/KEK Joint Project and Its Performance”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH102, pp. 564-568.
- M. Han, Y. Lu, and Z. Wang, “Design and optimization of water-cooling scheme for a 162.5 MHz three-gap rebuncher cavity”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS097, unpublished.
- T. Kanemura et al., “High power targetry devices at FRIB: challenges, status and plan”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOZ03, pp. 20-25.
- R. Veness et al., “Installation and Test of Pre-series Wire Scanners for the LHC Injector Upgrade Project at CERN”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 412-414.
- F. Havart et al., “Building on experience: renovation of the SNIFFER gas and fire protection system for the LHC experiments”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1595-1600.
- K. T. Son, K. Seol, S. Bae, D. Y. Lee, and H. J. Kim, “Status and performance of 150 kW RF solid state power amplifiers for the RFQ cavity”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper TUPB046, unpublished.
Back to search