Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Xu, R. Fischetti, O. Makarov, S. A. Stepanov, and N. Venugopalan, “Mechanical Design of New Dual Pinhole Mini-Beam Collimator With Motorized Pitch and Yaw Adjuster Provides Lower Background for X-Ray Crystallography at GMCA@APS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 387-389. doi:10.18429/JACoW-MEDSI2016-THAA03
[n] G. C. L. van Heusden, R. Reumers, and N. van Schaik, “The HF Phase Measuring Equipment of the Eindhoven AVF Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-04, pp. 353-354.
[n] J. Susta, “Development in Fabrication Methods”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-32, pp. XX-XX.
[n] M. Ferrario and L. Serafini, “Multi-Bunch Dynamics in RF Photoinjectors through an Envelope Equation Approach”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP06D, pp. 1271-1273.
[n] J.-L. Revol et al., “ESRF Upgrade Phase II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOAB203, pp. 1140-1142.
[n] S. U. De Silva, “Compact Superconducting Crabbing and Deflecting Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TH1A02, pp. 753-757.
[n] S. Weisse, “TINE Video System ÔÇô A Modular, Well-defined, Component-based and Interoperable TV System Undergoing a Redesign”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUY04, pp. 64-66.
[n] S. Matsumoto, S. Michizono, H. Tsutsui, Y. H. Chin, and S. Fukuda, “Simulation Study of the Bunching Section of X-Band Klystrons”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4042, pp. 490-492.
[n] S. Suphakul, S. Rimjaem, and C. Thongbai, “Beam Dynamics Simulation and Optimization of Electron Beam Properties for IR-FELs at Chiang Mai University”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD34, pp. 445-448.
[n] D. V. Neuffer, R. P. Johnson, and C. Y. Yoshikawa, “Use of Harmonics in RF Cavities in Muon Capture for a Neutrino Factory or Muon Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN106, pp. 2957-2959.
[n] R. D?Âlling, “Investigation of Space-Charge Compensation with Residual-Gas-Ion Energy Analyser”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP15, pp. 83-85.
[n] H. Koiso, A. Morita, Y. Ohnishi, and K. Oide, “Lattice Design for SuperKEKB”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP044, pp. 2591-2591.
[n] H. G. Blosser and J. W. Butler, “Experimental Facilities and Resolution Capability of the MSU Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63D02, pp. XX-XX.
[n] T. Meinander, A. Naves de Brito, and S. Werin, “Operation of a Narrow Gap, Short Pole Undulator at MAX I”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 651-654.
[n] A. R. Vrielink, M. H. Nasr, and S. G. Tantawi, “Derivation of a Finite Element Formulation From a Lagrangian for the Electromagnetic Potentials”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3208-3210. doi:10.18429/JACoW-IPAC2017-WEPIK111
[n] M. Martini and C. R. Prior, “High-intensity and High-density Charge-exchange Injection Studies into the CERN PS Booster at Intermediate Energies”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT028, pp. 1891-1893.
[n] D. Mancini et al., “Active Optics Control of the VST Telescope with the CAN Field-Bus”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP057, pp. XX-XX.
[n] G. Hutter, E. Gerards, W. Gutowski, U. Hansen, W. Hartmann, and N. Hartwich, “A New Generation of Solid State Amplifiers for Accelerators”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1909-1912.
[n] D. Huang, H. X. Deng, C. Feng, D. Gu, Q. Gu, and Z. T. Zhao, “Suppression of Microbunching Instability via a Transverse Gradient Undulator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 300-303. doi:10.18429/JACoW-IPAC2015-MOPJE008
[n] D. Wildman, “Transient Beam Loading Reduction During Multi-Batch Coalescing in the Fermilab Main Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 410-413.
[n] D. A. Lind, “Central Orbits in the Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A17, pp. 76-78.
[n] G. Benedetti, J. Campmany, and Z. Mart?¡, “Low Horizontal Beta Optics for ALBA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3461-3463. doi:10.18429/JACoW-IPAC2016-THPMR035
[n] M. Portillo, T. A. Barlow, J. A. Nolen, and Jr., “Design Layout of an Isobar Separator Based on 5th Order Calculations”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH073, pp. 3015-3017.
[n] R. Baartman and Y.-N. Rao, “Investigation of Space Charge Effect in TRIUMF Injection Beamline”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE014, pp. 1578-1580.
[n] O. S. Br??ning, “Overview of the LHeC Design Study at CERN”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOZB201, pp. 40-43.
[n] N. Simos, P. Hurh, and Z. Kotsina, “Long Baseline Neutrino Experiment Target Material Radiation Damage Studies Using Energetic Protons of the Brookhaven Linear Isotope Production (BLIP) Facility”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3C04, pp. 471-475.
[n] P. M. McIntyre, A. D. McInturff, and A. Sattarov, “Rapid-Cycling Dipole using Block-Coil Geometry and Bronze-Process Nb3Sn Superconductor”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS035, pp. 512-514.
[n] G. Viguier, Y. Huriez, M. Ounsy, K. S. Saintin, and R. Girardot, “COMETE: A Multi Data Source Oriented Graphical Framework”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMAU012, pp. 680-682.
[n] E. J. Minehara et al., “First Lasing of the JAERI FEL Driven by the Superconducting RF Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4016, pp. 800-802.
[n] A. Romano, G. Iadarola, K. S. B. Li, and G. Rumolo, “Macroparticle Simulation Studies of the LHC Beam Dynamics in the Presence of Electron Cloud”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2081-2084. doi:10.18429/JACoW-IPAC2017-TUPVA018
[n] K. Kamakura et al., “Design of a Sector Magnet for High Temperature Superconducting Injector Cyclotron”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOA2C01, pp. 27-29.
[n] Y. Xie and M. Liepe, “First Results on Cornell TE-type Sample Host Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC082, pp. 2402-2404.
[n] H. Gassot, “Mechanical Stability of the RF Superconducting Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO039, pp. 2235-2237.
[n] A. M. Koehler, “Medical Treatment and Diagnosis Using 160 MeV Protons (Invited Paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 586-603.
[n] J. R. Delayen and G. K. Davis, “Microphonics and Lorentz Transfer Function Measurements on the SNS Cryomodules”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP21, pp. 662-664.
[n] P. Mandrillon et al., “Recent Activities of the Cyclotron Laboratory in Nice”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VI-05, pp. 248-251.
[n] Y. Baconnier, P. Faugeras, K. H. Kissler, W. Scandale, and B. de Raad, “Extractiion from the Cern SPS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1434-1437.
[n] M. Izawa, Y. Kamiya, T. Koseki, and T. Takahashi, “HOM Coupler for the Damped Cavity of High Brilliance SR Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP21C, pp. 1776-1778.
[n] L. Wang, J. Cao, and Z. Zhao, “Beam Measurement with Synchrotron Radiation for BEPCII Storage Ring”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB74, pp. 249-251.
[n] L. Vos, “Tune and Stability of High Intensity Bunch Trains in the CERN SPS and LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A12, pp. 1176-1178.
[n] W. Urbanus et al., “Simultaneous Transport of N+ and N+2 Beams through a F0D0 Channel”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-46, pp. 161-163.
[n] J. B??rger, J. A. Dammann, L. Hagge, J. Iversen, A. Matheisen, and W. Singer, “Towards Industrialization: Supporting the Manufacturing Processes of Superconducting Cavities at DESY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP15, pp. 489-491.
[n] V. A. Lebedev, R. J. Pasquinelli, and D. Sun, “New Equalizers for Antiproton Stochastic Cooling at Fermilab”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP16, pp. 202-205.
[n] D. Oline, F. Krispel, and L. Sagalovsky, “Simulation of Magnetic Optics in the Focusing Magnet of a Medical Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1807-1810.
[n] L. Coull, D. Hagedorn, G. Krainz, F. Rodriguez-Mateos, and R. Schmidt, “Electrodynamic Behaviour of the LHC Superconducting Magnet String during a Discharge”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP017G, pp. 2240-2242.
[n] S. I. Kuptsov, “THE AUTOMATIC RADIATION CONTROL SYSTEM OF THE INR LINEAR ACCELERATOR (TROITSK)”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUKP04, pp. XX-XX.
[n] T. J. Zhang et al., “Beam Loss by Lorentz Stripping and Vacuum Dissociation in a 100 MeV Compact H- Cyclotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP111, pp. 5035-5037.
[n] R. Maier and U. Hacker, “Beam Diagnostic for COSY-Juelich”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1574-1577.
[n] T. Kii et al., “Design Study on THz Seeded FEL Using Photocathode RF Gun and Short Period Undulator”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUAAU03, pp. 196-199.
[n] V. Litvinenko, “Optics-Free FEL Oscillator”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOOA002, pp. XX-XX.
[n] D. W. Hewett and R. O. Bangerter, “The HIF Transport Code FOCI”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 369-371.
[n] T. S. Duh, “THE CURRENT STATUS AND FUTURE PROSPECTS OF TR 30/15 H-/DCYCLOTRON FACILITY AT INER IN TAIWAN”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P20, pp. XX-XX.
[n] R. Rata, S. C. Lee, and R. J. Barlow, “FLUKA Simulations for Radiation Protection at 3 Different Facilities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1940-1942. doi:10.18429/JACoW-IPAC2016-TUPOY018
[n] G. Prete et al., “The SPES project: an ISOL facility for exotic beams”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper MO-07, pp. 9-11.
[n] E. F. Higgins and J. E. Griffin, “High-Speed Beam Position Electronics for Accelerator Control and Diagnostics”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1574-1578.
[n] R. Cimino, M. Commisso, T. Demma, D. Grosso, N. Mahne, and A. Giglia, “Experimental Efforts at LNF to Reduce Secondary Electron Yield in Particle Accelerators”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MIT03, pp. 46-49.
[n] A. Burrill et al., “BNL 703 MHz SRF Cryomodule Demonstration”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP033, pp. 891-893.
[n] C. Matthews et al., “Exploring causes of Beam Loss at CEBAF”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6381, unpublished.
[n] D. Shuman, W. Barry, S. Prestemon, R. D. Schlueter, C. Steier, and G. D. Stover, “Stray Field Reduction in ALS Eddy Current Septum Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT067, pp. 3718-3720.
[n] A. Gotz, E. T. Taurel, P. V. Verdier, and G. Abeille, “TANGO - Can ZMQ Replace CORBA ?”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB07, pp. 964-968.
[n] H. Liebermann, H. Podlech, U. Ratzinger, and A. Sauer, “Design of a Superconducting CH-Cavity for Low- and Medium Beta Ion and Proton Acceleration”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB042, pp. 2820-2822.
[n] J. G. Kalnins, H. Kim, and D. L. Nelson, “On Formation of an Electron Ring in a Cusped Magnetic Field”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 473-477.
[n] M. Pekeler et al., “Design of a Superconducting Half Wave Resonator Module for Proton/Deuteron Acceleration”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP36, pp. 124-127.
[n] J. Qiang, L. Li, and Z. Wang, “A New RFQ Model and Symplectic Multi-Particle Tracking in the IMPACT Code Suite”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 562-566. doi:10.18429/JACoW-HB2016-THPM7Y01
[n] A. Jackson and H. Nishimura, “Single Particle Dynamics in the LBL 1-2 GeV Synchrotron Radiation Source in the Presence of Magnetic Imperfections, Magnet Displacement Errors and Insertion Devices”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 482-485.
[n] Y. M. Peng, J. Y. Li, C. Meng, and H. S. Xu, “STUDY OF THE RAMPING PROCESS FOR HEPS BOOSTER”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1521-1523. doi:10.18429/JACoW-IPAC2019-TUPGW052
[n] J. Pradhan et al., “Characterization of Superconducting Cable for K-500 Superconducting Cyclotron Magnet Coil”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM204, pp. XX-XX.
[n] J. Lei et al., “RF Study And Cold Test of an S-band Spherical Cavity Pulse Compressor”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2429-2431. doi:10.18429/JACoW-IPAC2018-WEPMF033
For LaTeX
Use Complete Form
For BibTeX
References
- S. Xu, R. Fischetti, O. Makarov, S. A. Stepanov, and N. Venugopalan, “Mechanical Design of New Dual Pinhole Mini-Beam Collimator With Motorized Pitch and Yaw Adjuster Provides Lower Background for X-Ray Crystallography at GMCA@APS”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 387-389.
- G. C. L. van Heusden, R. Reumers, and N. van Schaik, “The HF Phase Measuring Equipment of the Eindhoven AVF Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper E-04, pp. 353-354.
- J. Susta, “Development in Fabrication Methods”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-32, pp. XX-XX.
- M. Ferrario and L. Serafini, “Multi-Bunch Dynamics in RF Photoinjectors through an Envelope Equation Approach”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP06D, pp. 1271-1273.
- J.-L. Revol et al., “ESRF Upgrade Phase II”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUOAB203, pp. 1140-1142.
- S. U. De Silva, “Compact Superconducting Crabbing and Deflecting Cavities”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TH1A02, pp. 753-757.
- S. Weisse, “TINE Video System ÔÇô A Modular, Well-defined, Component-based and Interoperable TV System Undergoing a Redesign”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUY04, pp. 64-66.
- S. Matsumoto, S. Michizono, H. Tsutsui, Y. H. Chin, and S. Fukuda, “Simulation Study of the Bunching Section of X-Band Klystrons”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4042, pp. 490-492.
- S. Suphakul, S. Rimjaem, and C. Thongbai, “Beam Dynamics Simulation and Optimization of Electron Beam Properties for IR-FELs at Chiang Mai University”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD34, pp. 445-448.
- D. V. Neuffer, R. P. Johnson, and C. Y. Yoshikawa, “Use of Harmonics in RF Cavities in Muon Capture for a Neutrino Factory or Muon Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN106, pp. 2957-2959.
- R. D?Âlling, “Investigation of Space-Charge Compensation with Residual-Gas-Ion Energy Analyser”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP15, pp. 83-85.
- H. Koiso, A. Morita, Y. Ohnishi, and K. Oide, “Lattice Design for SuperKEKB”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP044, pp. 2591-2591.
- H. G. Blosser and J. W. Butler, “Experimental Facilities and Resolution Capability of the MSU Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63D02, pp. XX-XX.
- T. Meinander, A. Naves de Brito, and S. Werin, “Operation of a Narrow Gap, Short Pole Undulator at MAX I”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 651-654.
- A. R. Vrielink, M. H. Nasr, and S. G. Tantawi, “Derivation of a Finite Element Formulation From a Lagrangian for the Electromagnetic Potentials”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3208-3210.
- M. Martini and C. R. Prior, “High-intensity and High-density Charge-exchange Injection Studies into the CERN PS Booster at Intermediate Energies”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT028, pp. 1891-1893.
- D. Mancini et al., “Active Optics Control of the VST Telescope with the CAN Field-Bus”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP057, pp. XX-XX.
- G. Hutter, E. Gerards, W. Gutowski, U. Hansen, W. Hartmann, and N. Hartwich, “A New Generation of Solid State Amplifiers for Accelerators”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1909-1912.
- D. Huang, H. X. Deng, C. Feng, D. Gu, Q. Gu, and Z. T. Zhao, “Suppression of Microbunching Instability via a Transverse Gradient Undulator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 300-303.
- D. Wildman, “Transient Beam Loading Reduction During Multi-Batch Coalescing in the Fermilab Main Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 410-413.
- D. A. Lind, “Central Orbits in the Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A17, pp. 76-78.
- G. Benedetti, J. Campmany, and Z. Mart?¡, “Low Horizontal Beta Optics for ALBA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3461-3463.
- M. Portillo, T. A. Barlow, J. A. Nolen, and Jr., “Design Layout of an Isobar Separator Based on 5th Order Calculations”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH073, pp. 3015-3017.
- R. Baartman and Y.-N. Rao, “Investigation of Space Charge Effect in TRIUMF Injection Beamline”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE014, pp. 1578-1580.
- O. S. Br??ning, “Overview of the LHeC Design Study at CERN”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOZB201, pp. 40-43.
- N. Simos, P. Hurh, and Z. Kotsina, “Long Baseline Neutrino Experiment Target Material Radiation Damage Studies Using Energetic Protons of the Brookhaven Linear Isotope Production (BLIP) Facility”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3C04, pp. 471-475.
- P. M. McIntyre, A. D. McInturff, and A. Sattarov, “Rapid-Cycling Dipole using Block-Coil Geometry and Bronze-Process Nb3Sn Superconductor”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS035, pp. 512-514.
- G. Viguier, Y. Huriez, M. Ounsy, K. S. Saintin, and R. Girardot, “COMETE: A Multi Data Source Oriented Graphical Framework”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMAU012, pp. 680-682.
- E. J. Minehara et al., “First Lasing of the JAERI FEL Driven by the Superconducting RF Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4016, pp. 800-802.
- A. Romano, G. Iadarola, K. S. B. Li, and G. Rumolo, “Macroparticle Simulation Studies of the LHC Beam Dynamics in the Presence of Electron Cloud”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2081-2084.
- K. Kamakura et al., “Design of a Sector Magnet for High Temperature Superconducting Injector Cyclotron”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOA2C01, pp. 27-29.
- Y. Xie and M. Liepe, “First Results on Cornell TE-type Sample Host Cavities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC082, pp. 2402-2404.
- H. Gassot, “Mechanical Stability of the RF Superconducting Cavities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO039, pp. 2235-2237.
- A. M. Koehler, “Medical Treatment and Diagnosis Using 160 MeV Protons (Invited Paper)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 586-603.
- J. R. Delayen and G. K. Davis, “Microphonics and Lorentz Transfer Function Measurements on the SNS Cryomodules”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP21, pp. 662-664.
- P. Mandrillon et al., “Recent Activities of the Cyclotron Laboratory in Nice”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VI-05, pp. 248-251.
- Y. Baconnier, P. Faugeras, K. H. Kissler, W. Scandale, and B. de Raad, “Extractiion from the Cern SPS”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1434-1437.
- M. Izawa, Y. Kamiya, T. Koseki, and T. Takahashi, “HOM Coupler for the Damped Cavity of High Brilliance SR Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP21C, pp. 1776-1778.
- L. Wang, J. Cao, and Z. Zhao, “Beam Measurement with Synchrotron Radiation for BEPCII Storage Ring”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB74, pp. 249-251.
- L. Vos, “Tune and Stability of High Intensity Bunch Trains in the CERN SPS and LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A12, pp. 1176-1178.
- W. Urbanus et al., “Simultaneous Transport of N+ and N+2 Beams through a F0D0 Channel”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-46, pp. 161-163.
- J. B??rger, J. A. Dammann, L. Hagge, J. Iversen, A. Matheisen, and W. Singer, “Towards Industrialization: Supporting the Manufacturing Processes of Superconducting Cavities at DESY”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP15, pp. 489-491.
- V. A. Lebedev, R. J. Pasquinelli, and D. Sun, “New Equalizers for Antiproton Stochastic Cooling at Fermilab”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP16, pp. 202-205.
- D. Oline, F. Krispel, and L. Sagalovsky, “Simulation of Magnetic Optics in the Focusing Magnet of a Medical Accelerator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1807-1810.
- L. Coull, D. Hagedorn, G. Krainz, F. Rodriguez-Mateos, and R. Schmidt, “Electrodynamic Behaviour of the LHC Superconducting Magnet String during a Discharge”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP017G, pp. 2240-2242.
- S. I. Kuptsov, “THE AUTOMATIC RADIATION CONTROL SYSTEM OF THE INR LINEAR ACCELERATOR (TROITSK)”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUKP04, pp. XX-XX.
- T. J. Zhang et al., “Beam Loss by Lorentz Stripping and Vacuum Dissociation in a 100 MeV Compact H- Cyclotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP111, pp. 5035-5037.
- R. Maier and U. Hacker, “Beam Diagnostic for COSY-Juelich”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1574-1577.
- T. Kii et al., “Design Study on THz Seeded FEL Using Photocathode RF Gun and Short Period Undulator”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUAAU03, pp. 196-199.
- V. Litvinenko, “Optics-Free FEL Oscillator”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOOA002, pp. XX-XX.
- D. W. Hewett and R. O. Bangerter, “The HIF Transport Code FOCI”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 369-371.
- T. S. Duh, “THE CURRENT STATUS AND FUTURE PROSPECTS OF TR 30/15 H-/DCYCLOTRON FACILITY AT INER IN TAIWAN”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P20, pp. XX-XX.
- R. Rata, S. C. Lee, and R. J. Barlow, “FLUKA Simulations for Radiation Protection at 3 Different Facilities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1940-1942.
- G. Prete et al., “The SPES project: an ISOL facility for exotic beams”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper MO-07, pp. 9-11.
- E. F. Higgins and J. E. Griffin, “High-Speed Beam Position Electronics for Accelerator Control and Diagnostics”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1574-1578.
- R. Cimino, M. Commisso, T. Demma, D. Grosso, N. Mahne, and A. Giglia, “Experimental Efforts at LNF to Reduce Secondary Electron Yield in Particle Accelerators”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper MIT03, pp. 46-49.
- A. Burrill et al., “BNL 703 MHz SRF Cryomodule Demonstration”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP033, pp. 891-893.
- C. Matthews et al., “Exploring causes of Beam Loss at CEBAF”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6381, this conference.
- D. Shuman, W. Barry, S. Prestemon, R. D. Schlueter, C. Steier, and G. D. Stover, “Stray Field Reduction in ALS Eddy Current Septum Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT067, pp. 3718-3720.
- A. Gotz, E. T. Taurel, P. V. Verdier, and G. Abeille, “TANGO - Can ZMQ Replace CORBA ?”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCB07, pp. 964-968.
- H. Liebermann, H. Podlech, U. Ratzinger, and A. Sauer, “Design of a Superconducting CH-Cavity for Low- and Medium Beta Ion and Proton Acceleration”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB042, pp. 2820-2822.
- J. G. Kalnins, H. Kim, and D. L. Nelson, “On Formation of an Electron Ring in a Cusped Magnetic Field”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 473-477.
- M. Pekeler et al., “Design of a Superconducting Half Wave Resonator Module for Proton/Deuteron Acceleration”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP36, pp. 124-127.
- J. Qiang, L. Li, and Z. Wang, “A New RFQ Model and Symplectic Multi-Particle Tracking in the IMPACT Code Suite”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 562-566.
- A. Jackson and H. Nishimura, “Single Particle Dynamics in the LBL 1-2 GeV Synchrotron Radiation Source in the Presence of Magnetic Imperfections, Magnet Displacement Errors and Insertion Devices”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 482-485.
- Y. M. Peng, J. Y. Li, C. Meng, and H. S. Xu, “STUDY OF THE RAMPING PROCESS FOR HEPS BOOSTER”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1521-1523.
- J. Pradhan et al., “Characterization of Superconducting Cable for K-500 Superconducting Cyclotron Magnet Coil”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper WEM204, pp. XX-XX.
- J. Lei et al., “RF Study And Cold Test of an S-band Spherical Cavity Pulse Compressor”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2429-2431.
Back to search