Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Yonehara et al., “RF Integration into Helical Magnet for Muon 6-Dimensional Beam Cooling”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP062, pp. 274-276.
[n] T. Kramer, T. Stadlbauer, M. J. Barnes, M. Benedikt, and T. Fowler, “Risk Assessment of the Chopper Dipole Kicker Magnets for the MedAustron Facility”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO022, pp. 3388-3390.
[n] V. Petrillo et al., “The MariX source (Multidisciplinary Advanced Research Infrastructure with X-rays)”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4199-4202. doi:10.18429/JACoW-IPAC2018-THPMF058
[n] A. Miura, K. Moriya, and T. Miyao, “Application of Carbon Nanotube Wire for Beam Profile Measurement of Negative Hydrogen Ion Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 5022-5025. doi:10.18429/JACoW-IPAC2018-FRXGBD3
[n] H. Hassanzadegan, M. D. Donna, A. Jansson, H. Kocevar, T. J. Shea, and M. Werner, “Implementation Issues and First Results of the ESS Beam Current Monitor System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 745-747. doi:10.18429/JACoW-IPAC2017-MOPIK095
[n] Z. Sun et al., “Inverse inference of initial beam profile and key parameters based on automatic differentiation method”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 702-704. doi:10.18429/JACoW-LINAC2024-THPB033
[n] W. Fischer et al., “Observation of the Long-range Beam-beam Effect in RHIC and Plans for Compensation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH104, pp. 2158-2160.
[n] A. K. Tiwari, R. K. Arora, and P. R. Hannurkar, “Design and Simulation of Multibeam Klystron Cavity”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA137, pp. 509-510.
[n] P. Raabe, H. L. Hartnagel, and W. Heinrich, “Rigorous Computer Analysis of High-Frequency Pickup and Kicker Devices for ESR Stochastic Cooling”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 919-922.
[n] A. P. Zhukov, A. V. Aleksandrov, and Y. Liu, “Longitudinal Laser Wire at SNS”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOCYB3, pp. 12-15.
[n] C. Matejcek, K. Aulenbacher, and S. Friederich, “Low Energy Beam Transport System for MESA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1461-1464. doi:10.18429/JACoW-IPAC2019-TUPGW028
[n] C. A. Andre et al., “Beam Induced Fluorescence (BIF) Monitors as a Standard Operating Tool”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD60, pp. 185-187.
[n] V. N. Aseev, S. Bragin, S. A. Gavrilov, P. I. Reinhardt-Nickoulin, and O. Volodkevich, “Beam Simulation and Measurements at Beam Line to RADEX Experimental Area of INR Linac”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 251-253. doi:10.18429/JACoW-RUPAC2016-TUPSA016
[n] A. Ts. Amatuni et al., “The Yerevan Electron Accelerator: Status and Development”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 406-409.
[n] C. Gerth and C. Behrens, “Measurement of the Slice Energy Spread Induced by a Transverse Deflecting RF Structure at FLASH”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD31, pp. 371-373.
[n] R. Ainsworth, S. Chaurize, I. Kourbanis, and E. G. Stern, “Transition Crossing in the Main Injector for PIP-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3347-3349. doi:10.18429/JACoW-IPAC2017-WEPVA039
[n] H. I. Rutkowski, “Induction Linear Accelerators for Physics Diagnostics”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP40, pp. 154-156.
[n] J. H. Shao et al., “Recent progress of short pulse dielectric two-beam acceleration”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 640-643. doi:10.18429/JACoW-IPAC2018-TUYGBE3
[n] J. P. Holzbauer et al., “Test Shipment of the PIP-II 650 MHz Transport Frame Between FNAL to STFC-UKRI”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 750-754. doi:10.18429/JACoW-SRF2023-WEPWB070
[n] G. B. Bowden et al., “Microwave Cold-Testing Techniques for the NLC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP085L, pp. 2056-2058.
[n] J. Xu, “Study on a Longitudinal Damper System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1061-1064.
[n] X. J. Deng, A. Chao, W.-H. Huang, and C.-X. Tang, “Microbunching Enhancement by Adiabatic Trapping”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 635-637. doi:10.18429/JACoW-FEL2019-THP020
[n] M. Peiniger, M. Hein, N. Klein, G. M??ller, H. Piel, and P. Th??ns, “Work on Nb3Sn Cavities at Wuppertal”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E04, pp. XX-XX.
[n] G. Goin, J. Briaud, and L. Le Polotec, “Status Report on the CNRS Orleans' Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-12, pp. 129-132.
[n] A. Oeftiger, V. Isensee, O. Boine-Frankenheim, and E. Kazantseva, “Developing a Physics-Informed Gaussian Process Model to Construct an Uncertainty-Quantified Machine Model Using Bayesian Optimization”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5125, unpublished.
[n] M. Ferianis, A. Bucconi, G. Gaio, G. Mian, M. Predonzani, and F. Rossi, “The Copper Free FERMI Timing System: Implementation And Results”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM087, pp. 398-402.
[n] J. Ferm?®, F. Ripouteau, J. L. Belmont, G. Laborie, and G. Goin, “Grenoble Cycloton Progress Report”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A18, pp. XX-XX.
[n] M. Kondo et al., “The Osaka University RCNP 230-cm Isochronous Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-14, pp. 95-98.
[n] B. Friedrich, S. Eisebitt, T. Noll, W. Lu, T. Roth, and A. Madsen, “Mechanical Design of the MID Split-and-Delay Line at the European XFEL”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 50-53. doi:10.18429/JACoW-MEDSI2016-MOPE22
[n] A. H. Saab, “High Voltage, High Power Solid State Switch for Modulator Applications”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2535-2538.
[n] I. V. Agapov et al., “SASE Characteristics from Baseline European XFEL Undulators in the Tapering Regime”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP056, pp. 159-163.
[n] E. Haebel, “Higher Order Mode Suppression in Accelerating Structures”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 307-312.
[n] E. Roussel et al., “Influence of a Non-uniform Longitudinal Heating on High Brightness Electron Beams for FEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1535-1537. doi:10.18429/JACoW-IPAC2015-TUPWA053
[n] S. Assadi et al., “The SNS Laser Profile Monitor Design and Implementation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG054, pp. 2706-2708.
[n] A. Ratti et al., “The SNS RFQ Commissioning”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU412, pp. 329-331.
[n] M. Izawa, T. Koseki, S. Sakanaka, T. Takahashi, K. Hass, and Y. Kamiya, “Operation of New RF Damped Cavities at the Photon Factory Storage Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D033, pp. 758-760.
[n] W. Liu and Y. Jiao, “Generating Ultrashort X-Ray Pulse in a Diffraction-Limed Storage Ring by Phase-Merging Enhanced Harmonic Generation with Normal Modulator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1371-1374. doi:10.18429/JACoW-IPAC2018-TUPMF051
[n] H.-D. Nuhn, E. T. Scharlemann, and R. Schlüter, “Alignment and Magnet Error Tolerances for the LCLS X-Ray FEL”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA17, pp. 231-233.
[n] L. S. Shirshov et al., “Superconducting Transformers for Study of High-Current Superconducting Cables”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC008, pp. 340-342.
[n] M. Reiser, “Recent Advances in Collective Ion Accelerators”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3355-3360.
[n] L. Ma, P. Shi, K. Xue, J. Cao, and L. Wang, “The Tune Measurements in the BEPC Storage Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D053, pp. 522-524.
[n] C. J. Liaw, R. Schroeder, and R. Sikora, “Study of the RHIC BPM SMA Connector Failure Problem”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS095, pp. 649-651.
[n] T. P. Wangler, “High-Power Linac for a US Spallation-Neutron Source”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP40, pp. 749-751.
[n] G. Schmidt, M. Grewe, T. Weis, and K. Wille, “Modelling the Magnet Lattice of DELTA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE024, pp. 1193-1195.
[n] Y. Bao et al., “Beamline Design of EMuS - the First Experimental Muon Source in China”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1574-1576. doi:10.18429/JACoW-IPAC2018-TUPML020
[n] M. Katoh, A. Araki, Y. Hori, T. Kasuga, and Y. Kobayashi, “The Proposed Low Emittance Lattice for the PF Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 636-639.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Yonehara et al., “RF Integration into Helical Magnet for Muon 6-Dimensional Beam Cooling”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP062, pp. 274-276.
- T. Kramer, T. Stadlbauer, M. J. Barnes, M. Benedikt, and T. Fowler, “Risk Assessment of the Chopper Dipole Kicker Magnets for the MedAustron Facility”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO022, pp. 3388-3390.
- V. Petrillo et al., “The MariX source (Multidisciplinary Advanced Research Infrastructure with X-rays)”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4199-4202.
- A. Miura, K. Moriya, and T. Miyao, “Application of Carbon Nanotube Wire for Beam Profile Measurement of Negative Hydrogen Ion Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 5022-5025.
- H. Hassanzadegan, M. D. Donna, A. Jansson, H. Kocevar, T. J. Shea, and M. Werner, “Implementation Issues and First Results of the ESS Beam Current Monitor System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 745-747.
- Z. Sun et al., “Inverse inference of initial beam profile and key parameters based on automatic differentiation method”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 702-704.
- W. Fischer et al., “Observation of the Long-range Beam-beam Effect in RHIC and Plans for Compensation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH104, pp. 2158-2160.
- A. K. Tiwari, R. K. Arora, and P. R. Hannurkar, “Design and Simulation of Multibeam Klystron Cavity”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA137, pp. 509-510.
- P. Raabe, H. L. Hartnagel, and W. Heinrich, “Rigorous Computer Analysis of High-Frequency Pickup and Kicker Devices for ESR Stochastic Cooling”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 919-922.
- A. P. Zhukov, A. V. Aleksandrov, and Y. Liu, “Longitudinal Laser Wire at SNS”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOCYB3, pp. 12-15.
- C. Matejcek, K. Aulenbacher, and S. Friederich, “Low Energy Beam Transport System for MESA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1461-1464.
- C. A. Andre et al., “Beam Induced Fluorescence (BIF) Monitors as a Standard Operating Tool”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD60, pp. 185-187.
- V. N. Aseev, S. Bragin, S. A. Gavrilov, P. I. Reinhardt-Nickoulin, and O. Volodkevich, “Beam Simulation and Measurements at Beam Line to RADEX Experimental Area of INR Linac”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 251-253.
- A. Ts. Amatuni et al., “The Yerevan Electron Accelerator: Status and Development”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 406-409.
- C. Gerth and C. Behrens, “Measurement of the Slice Energy Spread Induced by a Transverse Deflecting RF Structure at FLASH”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD31, pp. 371-373.
- R. Ainsworth, S. Chaurize, I. Kourbanis, and E. G. Stern, “Transition Crossing in the Main Injector for PIP-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3347-3349.
- H. I. Rutkowski, “Induction Linear Accelerators for Physics Diagnostics”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP40, pp. 154-156.
- J. H. Shao et al., “Recent progress of short pulse dielectric two-beam acceleration”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 640-643.
- J. P. Holzbauer et al., “Test Shipment of the PIP-II 650 MHz Transport Frame Between FNAL to STFC-UKRI”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB070, pp. 750-754.
- G. B. Bowden et al., “Microwave Cold-Testing Techniques for the NLC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP085L, pp. 2056-2058.
- J. Xu, “Study on a Longitudinal Damper System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1061-1064.
- X. J. Deng, A. Chao, W.-H. Huang, and C.-X. Tang, “Microbunching Enhancement by Adiabatic Trapping”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 635-637.
- M. Peiniger, M. Hein, N. Klein, G. M??ller, H. Piel, and P. Th??ns, “Work on Nb3Sn Cavities at Wuppertal”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87E04, pp. XX-XX.
- G. Goin, J. Briaud, and L. Le Polotec, “Status Report on the CNRS Orleans' Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-12, pp. 129-132.
- A. Oeftiger, V. Isensee, O. Boine-Frankenheim, and E. Kazantseva, “Developing a Physics-Informed Gaussian Process Model to Construct an Uncertainty-Quantified Machine Model Using Bayesian Optimization”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5125, this conference.
- M. Ferianis, A. Bucconi, G. Gaio, G. Mian, M. Predonzani, and F. Rossi, “The Copper Free FERMI Timing System: Implementation And Results”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM087, pp. 398-402.
- J. Ferm?®, F. Ripouteau, J. L. Belmont, G. Laborie, and G. Goin, “Grenoble Cycloton Progress Report”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A18, pp. XX-XX.
- M. Kondo et al., “The Osaka University RCNP 230-cm Isochronous Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-14, pp. 95-98.
- B. Friedrich, S. Eisebitt, T. Noll, W. Lu, T. Roth, and A. Madsen, “Mechanical Design of the MID Split-and-Delay Line at the European XFEL”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 50-53.
- A. H. Saab, “High Voltage, High Power Solid State Switch for Modulator Applications”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2535-2538.
- I. V. Agapov et al., “SASE Characteristics from Baseline European XFEL Undulators in the Tapering Regime”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP056, pp. 159-163.
- E. Haebel, “Higher Order Mode Suppression in Accelerating Structures”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 307-312.
- E. Roussel et al., “Influence of a Non-uniform Longitudinal Heating on High Brightness Electron Beams for FEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1535-1537.
- S. Assadi et al., “The SNS Laser Profile Monitor Design and Implementation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG054, pp. 2706-2708.
- A. Ratti et al., “The SNS RFQ Commissioning”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU412, pp. 329-331.
- M. Izawa, T. Koseki, S. Sakanaka, T. Takahashi, K. Hass, and Y. Kamiya, “Operation of New RF Damped Cavities at the Photon Factory Storage Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D033, pp. 758-760.
- W. Liu and Y. Jiao, “Generating Ultrashort X-Ray Pulse in a Diffraction-Limed Storage Ring by Phase-Merging Enhanced Harmonic Generation with Normal Modulator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1371-1374.
- H.-D. Nuhn, E. T. Scharlemann, and R. Schlüter, “Alignment and Magnet Error Tolerances for the LCLS X-Ray FEL”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA17, pp. 231-233.
- L. S. Shirshov et al., “Superconducting Transformers for Study of High-Current Superconducting Cables”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC008, pp. 340-342.
- M. Reiser, “Recent Advances in Collective Ion Accelerators”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3355-3360.
- L. Ma, P. Shi, K. Xue, J. Cao, and L. Wang, “The Tune Measurements in the BEPC Storage Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D053, pp. 522-524.
- C. J. Liaw, R. Schroeder, and R. Sikora, “Study of the RHIC BPM SMA Connector Failure Problem”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS095, pp. 649-651.
- T. P. Wangler, “High-Power Linac for a US Spallation-Neutron Source”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP40, pp. 749-751.
- G. Schmidt, M. Grewe, T. Weis, and K. Wille, “Modelling the Magnet Lattice of DELTA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE024, pp. 1193-1195.
- Y. Bao et al., “Beamline Design of EMuS - the First Experimental Muon Source in China”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1574-1576.
- M. Katoh, A. Araki, Y. Hori, T. Kasuga, and Y. Kobayashi, “The Proposed Low Emittance Lattice for the PF Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 636-639.
Back to search