Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Karantzoulis, “A Generalized Orbit Correction Scheme”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE004, pp. 1142-1144.
[n] P. Schwaller and M. Montani, “Technology Incubator to promote the Foundation of New Businesses From Lab to Business (L2B)""”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEILA002, pp. 184-184.
[n] S. A. Bogacz, “Beam Loading Optimized Filling Patterns for Partially Filled Storage Rings”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5V044, pp. 1697-1699.
[n] G. Devanz, “Power Coupler Developments for High Intensity Linacs”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TH104, pp. 722-726.
[n] Frank Stocker, Howard Fenker, Ron Schailey, “Test and Calibration Beams at the Superconducting Super Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 890-893.
[n] V. Schoefer, E. Aschenauer, H. Huang, V. Ptitsyn, F. Meot, and V. Ranjbar, “Stable spin direction measurements at RHIC with polarized proton beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 515-518. doi:10.18429/JACoW-IPAC2023-MOPL004
[n] Roman Tatchyn, “Design Features of a Planar Hybrid/Permanent Magnet Strong-Focusing Undulator for Free Electron Laser (FEL) and Synchrotron Radiation (SR) Applications”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V048, pp. 3530-3532.
[n] G. Ha, A. DeSimone, and B. N. Temizel Ozdemir, “Deflecting cavity-based multifunctional longitudinal manipulator for CSR-mitigated bunch compression”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1192-1195. doi:10.18429/JACoW-IPAC2025-TUPM014
[n] A. Bank and P. Forck Gesellschaft f??r Schwerionenforschung, “Residual Gas Fluorescence for Profile Measurements at the GSI UNILAC”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM18, pp. XX-XX.
[n] R. Averill et al., “Superconducting Solenoids for the Polarized Electron Spin Control System of the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P008, pp. 3407-3409.
[n] C. Fischer, “Improved CLIC Performances Using the Beam Response for Correcting Alignment Errors”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC14, pp. 731-733.
[n] H. J. Choi et al., “Operation Status of HLS System Installed to Measure Ground Change of Large Scientific Equipment in Real Time”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 245-248. doi:10.18429/JACoW-MEDSI2018-WEPH18
[n] H. Henke and M. Filtz, “Envelope Equations for Transients in Linear Chains of Resonators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 901-904.
[n] M. Borland et al., “Recent Progress and Plans for the Code ELEGANT”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper WE3IOPK02, pp. 111-116.
[n] M. Schlapp, R. Trassl, R. W. McCullough, J. B. Greenwood, and E. Salzborn, “Characterization and Recent Modification of a Compact 10 GHz ECRIS for Atomic Physics Experiments and Spectroscopic Investigations”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W004, pp. 2705-2707.
[n] S. V. Kuzikov, S. P. Antipov, O. A. Ivanov, A. A. Vikharev, and A. L. Vikharev, “Novel Concepts of a High-Brightness Photoinjector RF Gun”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 397-400. doi:10.18429/JACoW-FEL2017-WEA04
[n] S. Yu. Taskaev, D. A. Kasatov, A. S. Kuznetsov, A. N. Makarov, I. M. Shchudlo, and I. N. Sorokin, “Problems and Prospects of the Tandem Accelerator with Vacuum Insulation”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper FRCB01, pp. 465-466.
[n] E. Cicek et al., “Implementation of an Advanced MicroTCA.4-based Digitizer for Monitoring Comb-Like Beam at the J-PARC Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 219-222. doi:10.18429/JACoW-LINAC2022-MOPORI02
[n] T. O. Raubenheimer, “A Formalism and Computer Program for Couple Lattices”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1313-1316.
[n] Z. N. Liu, H. B. Chen, J. Shi, and H. Zha, “There-Dimensional Simulation of a C-Band 32-Beam Klystron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4190-4193. doi:10.18429/JACoW-IPAC2019-THPTS038
[n] R. B. Fiorito, A. G. Shkvarunets, T. Watanabe, and V. Yakimenko, “Advances in Optical Transition and Diffraction Radiation Emittance Diagnostics”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT089, pp. 4224-4226.
[n] C. F. Fluder, M. Pezzetti, A. Tovar-Gonzalez, K. M. Mastyna, P. Peksa, and T. Wolak, “Status of the Process Control Systems Upgrade for the Cryogenic Installations of the LHC Based ATLAS and CMS Detectors”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1215. doi:10.18429/JACoW-ICALEPCS2019-WEPHA050
[n] M. Meena, A. Pathak, and R. Varma, “RF Design, Optimization and Multiphysics Study of a β = 1, 1.3 GHz Single Cell Accelerating Cavity for High-Intensity Compact Superconducting Electron Accelerator (HICSEA)”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 41-43. doi:10.18429/JACoW-LINAC2022-MOPOJO08
[n] S. W. Jang, “Development of Button BPM Electronics for the Bunch by Bunch Feedback System of 4GSR”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 332-334. doi:10.18429/JACoW-IPAC2022-MOPOPT038
[n] A.-S. Muller and J. Wenninger, “Measurements of Tune Shifts with Amplitude at LEP”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA129, pp. 2885-2887.
[n] M. N. Noir, P. B. Biedrawa, S. F. Fargier, J. W. Jasonek, and M. Sosin, “Development and Qualification of Micrometre Resolution Motorized Actuators for the High Luminosity Large Hadron Collider Full Remote Alignment System”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 243-246. doi:10.18429/JACoW-MEDSI2023-THOAM01
[n] K. Togawa et al., “Emittance Measurement on the CeB6 Electron Gun for the SPring-8 Compact SASE Source”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THBOC03, pp. XX-XX.
[n] G. C. Pappas, D. Lu, M. Schram, and D. L. Vrabie, “Machine Learning for Improved Availability of the SNS Klystron High Voltage Converter Modulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4303-4306. doi:10.18429/JACoW-IPAC2021-THPAB252
[n] A. Gallo et al., “Design of a Multi-Cell, HOM Damped Superconducting Cavity for the Strong RF Focusing Experiment at DAFNE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT060, pp. 3505-3507.
[n] C. Charrondi?â, M. Cabon, K. Develle, and M. Guinchard, “Ground Vibration Monitoring at CERN as Part of the International Seismic Network”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1695-1698. doi:10.18429/JACoW-ICALEPCS2017-THPHA134
[n] T. W. Hardek and W. E. Chyna, “Common Anode Amplifier Development”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3959-3962.
[n] N. Hayashi et al., “Development of the Beam Diagnostics System for the J-PARC Rapid-Cycling Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAD003, pp. 299-301.
[n] K. Hanke, J. Sanchez-Conejo, and R. Scrivens, “Dispersion Matching of a Space Charge Dominated Beam at Injection into the CERN PS Booster”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT054, pp. 3283-3285.
[n] D. F. Sutter, B. L. Beaudoin, and L. Dovlatyan, “Off Axis Dependence of Current Dependent Coherent Tune Shifts in the UMER Ring”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 422-425. doi:10.18429/JACoW-NAPAC2019-TUPLM22
[n] S. Thielk, R. Agustsson, P. Carriere, and S. Kutsaev, “Evaluation of low-loss alumina material for high-power RF windows”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4373-4376. doi:10.18429/JACoW-IPAC2023-THPA174
[n] D. Greene et al., “Status of coil-dominated discrete-cosine-theta quadrupole prototype for high rigidity isotope beams”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2854-2857. doi:10.18429/JACoW-IPAC2024-WEPS67
[n] Y. Iwashita, “Pisces II: 2.5-D RF Cavity Code, An Extension of Superfish”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-73, pp. 239-241.
[n] M. Quattromini, M. Del Franco, L. Giannessi, and C. R. Frascati, “Fast Multipole Approximation of 3D Self Fields Effect in High Brightness Electron Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP050, pp. 3315-3317.
[n] F. Braun et al., “Investigation of onset field variations in diversely fabricated samples through field emission scanning microscopy”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS68, unpublished.
[n] A. T. Vasilenko et al., “Experimental Research of the Closed Orbit Expansion Effect in the Strong Focusing Cyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1862-1866.
[n] U. Ristau, M. Bueno, S. Fiedler, T. Gehrmann, D. Jahn, and V. Palnati, “Marvin Update ÔÇÖ the Robotic Sample Mounting System at the Embl-Hamburg”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 163-166. doi:10.18429/JACoW-PCaPAC2018-THP03
[n] W. Asztalos, F. Pellemoine, P. Rath, S. Bidhar, and Y. Torun, “Bayesian optimization scheme for the design of a nanofibrous high power target”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1762-1765. doi:10.18429/JACoW-IPAC2024-TUPS45
[n] J. R. J. Bennett, “A Vacuum System for the ESS Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO016, pp. 2544-2546.
[n] T. Goldman, “An Active Particle Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2569-2572.
[n] S. J. Brooks and S. A. Bogacz, “Permanent Magnets for the CEBAF 24GeV Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2792-2795. doi:10.18429/JACoW-IPAC2022-THPOTK011
[n] K. Meisner, “RF Synchronous Transfer into Specific Buckets Between Fermilab Main Ring and Tevatron Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2522-2525.
[n] G. L. Dou, “Simulation and Analysis of HIMM-IC Beam Dynamics with OPAL”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEAO02, pp. 152-155. doi:10.18429/JACoW-CYCLOTRONS2022-WEAO02
[n] M. Crane, R. Mackenzie, D. Millsom, and M. Zelazny, “AMS: Area Message Service for SLC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1966-1969.
[n] C. Caliari, O. Boine-Frankenheim, and A. Oeftiger, “Design of a Proof-of-Principle Experiment for the DLMN Method to Identify Magnetic Field Errors”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper WEA1C2, unpublished.
[n] M. J. Pugh and A. R. MacDonald, “Implementation of a New RF Monitoring System for the SRS Using LabVIEW”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P027, pp. 2508-2510.
[n] J. D. Gilpatrick, “Phase and Synchronous Detector Theory as Applied to Beam Position and Intensity Measurements”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB16, pp. 2563-2565.
[n] V. V. Nesterov and A. R. Donaldson, “High Current High Accuracy IGBT Pulse Generator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA11, pp. 1251-1253.
[n] W. J. Gallagher, “Periodic Structure Studies”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2788-2791.
[n] Sh. Bilanishvili, “Design of Cavity BPM Pickup for EuPRAXIA@SPARC_LAB”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 924-926. doi:10.18429/JACoW-IPAC2021-MOPAB291
[n] R.C. Singleterry Jr., G. R. Imel, and G. E. McMichael, “Moderator/Collimator for a Proton/Deuteron Linac to Produce a High-Intensity, High- Quality Thermal Neutron Beam for Neutron Radiography”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAC12, pp. 149-151.
[n] D. Gupta, S. Aggarwal, R. Singhal, and G. R. Umapathy, “Ripple Pattern Formation on Silicon Carbide Surfaces by Low-Energy Ion-Beam Erosion”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3045-3048. doi:10.18429/JACoW-IPAC2022-THPOMS037
[n] K. Makino, “Rigorous Integration of Maps and Long-Term Stability”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7B002, pp. 1336-1340.
[n] J. A. Rubio, “A Review of Technology Transfer at CERN”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEILA003, pp. 185-189.
[n] M.-E. Couprie, “Undulator Technologies for Future Free Electron Laser Facilities and Storage Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOZB102, pp. 26-30.
[n] S. Gallagher and W. J. Gallagher, “The Spherical Resonator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2980-2983.
[n] G. R. Neil, “A Cost Estimation Model for High Power FELs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAC03, pp. 137-139.
[n] V. P. Kovalev, V. M. Korepanov, B. M. Lavrent'ev, R. N. Munasypov, and B. A. Filatov, “EMIR-M Installation in the Mode of Operation with Plasma Opening Switch”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA21, pp. 1274-1275.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Karantzoulis, “A Generalized Orbit Correction Scheme”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE004, pp. 1142-1144.
- P. Schwaller and M. Montani, “Technology Incubator to promote the Foundation of New Businesses From Lab to Business (L2B)""”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEILA002, pp. 184-184.
- S. A. Bogacz, “Beam Loading Optimized Filling Patterns for Partially Filled Storage Rings”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5V044, pp. 1697-1699.
- G. Devanz, “Power Coupler Developments for High Intensity Linacs”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TH104, pp. 722-726.
- Frank Stocker, Howard Fenker, Ron Schailey, “Test and Calibration Beams at the Superconducting Super Collider”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 890-893.
- V. Schoefer, E. Aschenauer, H. Huang, V. Ptitsyn, F. Meot, and V. Ranjbar, “Stable spin direction measurements at RHIC with polarized proton beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL004, pp. 515-518.
- Roman Tatchyn, “Design Features of a Planar Hybrid/Permanent Magnet Strong-Focusing Undulator for Free Electron Laser (FEL) and Synchrotron Radiation (SR) Applications”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V048, pp. 3530-3532.
- G. Ha, A. DeSimone, and B. N. Temizel Ozdemir, “Deflecting cavity-based multifunctional longitudinal manipulator for CSR-mitigated bunch compression”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM014, pp. 1192-1195.
- A. Bank and P. Forck Gesellschaft f??r Schwerionenforschung, “Residual Gas Fluorescence for Profile Measurements at the GSI UNILAC”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM18, pp. XX-XX.
- R. Averill et al., “Superconducting Solenoids for the Polarized Electron Spin Control System of the MIT-Bates South Hall Ring (SHR)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P008, pp. 3407-3409.
- C. Fischer, “Improved CLIC Performances Using the Beam Response for Correcting Alignment Errors”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC14, pp. 731-733.
- H. J. Choi et al., “Operation Status of HLS System Installed to Measure Ground Change of Large Scientific Equipment in Real Time”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 245-248.
- H. Henke and M. Filtz, “Envelope Equations for Transients in Linear Chains of Resonators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 901-904.
- M. Borland et al., “Recent Progress and Plans for the Code ELEGANT”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper WE3IOPK02, pp. 111-116.
- M. Schlapp, R. Trassl, R. W. McCullough, J. B. Greenwood, and E. Salzborn, “Characterization and Recent Modification of a Compact 10 GHz ECRIS for Atomic Physics Experiments and Spectroscopic Investigations”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W004, pp. 2705-2707.
- S. V. Kuzikov, S. P. Antipov, O. A. Ivanov, A. A. Vikharev, and A. L. Vikharev, “Novel Concepts of a High-Brightness Photoinjector RF Gun”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 397-400.
- S. Yu. Taskaev, D. A. Kasatov, A. S. Kuznetsov, A. N. Makarov, I. M. Shchudlo, and I. N. Sorokin, “Problems and Prospects of the Tandem Accelerator with Vacuum Insulation”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper FRCB01, pp. 465-466.
- E. Cicek et al., “Implementation of an Advanced MicroTCA.4-based Digitizer for Monitoring Comb-Like Beam at the J-PARC Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 219-222.
- T. O. Raubenheimer, “A Formalism and Computer Program for Couple Lattices”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1313-1316.
- Z. N. Liu, H. B. Chen, J. Shi, and H. Zha, “There-Dimensional Simulation of a C-Band 32-Beam Klystron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4190-4193.
- R. B. Fiorito, A. G. Shkvarunets, T. Watanabe, and V. Yakimenko, “Advances in Optical Transition and Diffraction Radiation Emittance Diagnostics”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT089, pp. 4224-4226.
- C. F. Fluder, M. Pezzetti, A. Tovar-Gonzalez, K. M. Mastyna, P. Peksa, and T. Wolak, “Status of the Process Control Systems Upgrade for the Cryogenic Installations of the LHC Based ATLAS and CMS Detectors”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1215.
- M. Meena, A. Pathak, and R. Varma, “RF Design, Optimization and Multiphysics Study of a β = 1, 1.3 GHz Single Cell Accelerating Cavity for High-Intensity Compact Superconducting Electron Accelerator (HICSEA)”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 41-43.
- S. W. Jang, “Development of Button BPM Electronics for the Bunch by Bunch Feedback System of 4GSR”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 332-334.
- A.-S. Muller and J. Wenninger, “Measurements of Tune Shifts with Amplitude at LEP”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA129, pp. 2885-2887.
- M. N. Noir, P. B. Biedrawa, S. F. Fargier, J. W. Jasonek, and M. Sosin, “Development and Qualification of Micrometre Resolution Motorized Actuators for the High Luminosity Large Hadron Collider Full Remote Alignment System”, in Proc. MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper THOAM01, pp. 243-246.
- K. Togawa et al., “Emittance Measurement on the CeB6 Electron Gun for the SPring-8 Compact SASE Source”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THBOC03, pp. XX-XX.
- G. C. Pappas, D. Lu, M. Schram, and D. L. Vrabie, “Machine Learning for Improved Availability of the SNS Klystron High Voltage Converter Modulators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4303-4306.
- A. Gallo et al., “Design of a Multi-Cell, HOM Damped Superconducting Cavity for the Strong RF Focusing Experiment at DAFNE”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT060, pp. 3505-3507.
- C. Charrondi?â, M. Cabon, K. Develle, and M. Guinchard, “Ground Vibration Monitoring at CERN as Part of the International Seismic Network”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1695-1698.
- T. W. Hardek and W. E. Chyna, “Common Anode Amplifier Development”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3959-3962.
- N. Hayashi et al., “Development of the Beam Diagnostics System for the J-PARC Rapid-Cycling Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAD003, pp. 299-301.
- K. Hanke, J. Sanchez-Conejo, and R. Scrivens, “Dispersion Matching of a Space Charge Dominated Beam at Injection into the CERN PS Booster”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT054, pp. 3283-3285.
- D. F. Sutter, B. L. Beaudoin, and L. Dovlatyan, “Off Axis Dependence of Current Dependent Coherent Tune Shifts in the UMER Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 422-425.
- S. Thielk, R. Agustsson, P. Carriere, and S. Kutsaev, “Evaluation of low-loss alumina material for high-power RF windows”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA174, pp. 4373-4376.
- D. Greene et al., “Status of coil-dominated discrete-cosine-theta quadrupole prototype for high rigidity isotope beams”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS67, pp. 2854-2857.
- Y. Iwashita, “Pisces II: 2.5-D RF Cavity Code, An Extension of Superfish”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-73, pp. 239-241.
- M. Quattromini, M. Del Franco, L. Giannessi, and C. R. Frascati, “Fast Multipole Approximation of 3D Self Fields Effect in High Brightness Electron Beams”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP050, pp. 3315-3317.
- F. Braun et al., “Investigation of onset field variations in diversely fabricated samples through field emission scanning microscopy”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS68, unpublished.
- A. T. Vasilenko et al., “Experimental Research of the Closed Orbit Expansion Effect in the Strong Focusing Cyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1862-1866.
- U. Ristau, M. Bueno, S. Fiedler, T. Gehrmann, D. Jahn, and V. Palnati, “Marvin Update ÔÇÖ the Robotic Sample Mounting System at the Embl-Hamburg”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 163-166.
- W. Asztalos, F. Pellemoine, P. Rath, S. Bidhar, and Y. Torun, “Bayesian optimization scheme for the design of a nanofibrous high power target”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS45, pp. 1762-1765.
- J. R. J. Bennett, “A Vacuum System for the ESS Accelerator”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO016, pp. 2544-2546.
- T. Goldman, “An Active Particle Accelerator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2569-2572.
- S. J. Brooks and S. A. Bogacz, “Permanent Magnets for the CEBAF 24GeV Upgrade”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2792-2795.
- K. Meisner, “RF Synchronous Transfer into Specific Buckets Between Fermilab Main Ring and Tevatron Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2522-2525.
- G. L. Dou, “Simulation and Analysis of HIMM-IC Beam Dynamics with OPAL”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEAO02, pp. 152-155.
- M. Crane, R. Mackenzie, D. Millsom, and M. Zelazny, “AMS: Area Message Service for SLC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1966-1969.
- C. Caliari, O. Boine-Frankenheim, and A. Oeftiger, “Design of a Proof-of-Principle Experiment for the DLMN Method to Identify Magnetic Field Errors”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA1C2, unpublished.
- M. J. Pugh and A. R. MacDonald, “Implementation of a New RF Monitoring System for the SRS Using LabVIEW”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P027, pp. 2508-2510.
- J. D. Gilpatrick, “Phase and Synchronous Detector Theory as Applied to Beam Position and Intensity Measurements”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB16, pp. 2563-2565.
- V. V. Nesterov and A. R. Donaldson, “High Current High Accuracy IGBT Pulse Generator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAA11, pp. 1251-1253.
- W. J. Gallagher, “Periodic Structure Studies”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2788-2791.
- Sh. Bilanishvili, “Design of Cavity BPM Pickup for EuPRAXIA@SPARC_LAB”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 924-926.
- R.C. Singleterry Jr., G. R. Imel, and G. E. McMichael, “Moderator/Collimator for a Proton/Deuteron Linac to Produce a High-Intensity, High- Quality Thermal Neutron Beam for Neutron Radiography”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAC12, pp. 149-151.
- D. Gupta, S. Aggarwal, R. Singhal, and G. R. Umapathy, “Ripple Pattern Formation on Silicon Carbide Surfaces by Low-Energy Ion-Beam Erosion”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3045-3048.
- K. Makino, “Rigorous Integration of Maps and Long-Term Stability”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7B002, pp. 1336-1340.
- J. A. Rubio, “A Review of Technology Transfer at CERN”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEILA003, pp. 185-189.
- M.-E. Couprie, “Undulator Technologies for Future Free Electron Laser Facilities and Storage Rings”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOZB102, pp. 26-30.
- S. Gallagher and W. J. Gallagher, “The Spherical Resonator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2980-2983.
- G. R. Neil, “A Cost Estimation Model for High Power FELs”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAC03, pp. 137-139.
- V. P. Kovalev, V. M. Korepanov, B. M. Lavrent'ev, R. N. Munasypov, and B. A. Filatov, “EMIR-M Installation in the Mode of Operation with Plasma Opening Switch”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAA21, pp. 1274-1275.
Back to search