Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. S. McNeilly et al., “Design Study for the Conversion of the Oak Ridge Isochronous Cyclotron from an Energy Constant of K=90 to K=300 MeV”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-11, pp. 626-629.
[n] A. Moretti, J. W. Dawson, R. M. Lill, J. J. Peerson, and M. T. Rebuehr, “Radio Frequency Superconducting Studies at Argonne National Laboratory”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 186-188.
[n] Z. X. Shao, H. Gao, L. Wang, and H. Y. Zhang, “Design of Beam Position Fast-Correction Magnet Power Supply for HALS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4967-4969. doi:10.18429/JACoW-IPAC2018-THPML124
[n] J. Chavanne, “Insertion Devices at the ESRF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 654-657.
[n] J. Chen et al., “A Novel Non-Linear Strip-Line Kicker Driven by Fast Pulser in Common Mode”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2345-2348. doi:10.18429/JACoW-IPAC2019-WEPMP018
[n] A. E. Gustafsson, S. Calatroni, R. Seviour, and W. Vollenberg, “New Methods for Thin Film Deposition and First Investigations of the use of High Temperature Superconductors for Thin Film Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC047, pp. 2995-2997.
[n] A. A. Garcia, B. Dehning, G. Ferioli, and E. Gschwendtner Geneva, “LHC Beam Loss Monitors”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM14, pp. XX-XX.
[n] M. Kanazawa et al., “Beam Test of the Acceleration System with the DDS in HIMAC Synchrotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P048, pp. 2347-2349.
[n] J. L. Wilson, A. E. Fathy, and Y. W. Kang, “Investigation of Using Ferroelectric Materials in High Power Fast RF Phase Shifters for RF Vector Modulation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH194, pp. 3248-3250.
[n] P. Messmer et al., “Simulation-driven Optimization of Heavy-ion Production in ECR Sources”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROBAB01, pp. 3786-3788.
[n] M. Popovic et al., “Innovative Magnetron Power Sources for SRF Linacs”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 473-475. doi:10.18429/JACoW-LINAC2022-TUPOPA30
[n] B. Morris and R. B. Saethre, “Final Conversion of the Spallation Neutron Source Extraction Kicker Pulse Forming Network to a High Voltage Solid-State Switch”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 240-242. doi:10.18429/JACoW-NAPAC2019-MOPLO03
[n] Y. M. Park et al., “Development of SC Bus-Line for The KSTAR Superconducting Magnet”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU475, pp. 491-493.
[n] A. V. Zlobin, E. Z. Barzi, D. Turrioni, Y. Ivanyushenkov, and I. Kesgin, “Advantages and Challenges of Nb3Sn Superconducting Undulators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2734-2737. doi:10.18429/JACoW-IPAC2018-WEPML025
[n] D. M?ñder et al., “Status and Development of the MYRRHA Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 432-434. doi:10.18429/JACoW-IPAC2018-MOPML017
[n] Z. Duan et al., “Status of the Compton Polarimeter Project at BEPCII”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1621, unpublished.
[n] G. Vashchenko et al., “Characterization of the Electron Beam from the Thz Driven Gun for AXSIS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 509-511. doi:10.18429/JACoW-IPAC2017-MOPIK006
[n] M. I. Bikchurina et al., “Measurement of Parameters of Neutron Radiation on the Accelerator-Based Epithermal Neutron Source”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 337-339. doi:10.18429/JACoW-RuPAC2021-TUPSB53
[n] K. Fong, T. Au, X. L. Fu, R. Leewe, and Q. Zheng, “RF Cavity Resonant Control Using Mimimal Seeking Sliding Mode Controller”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOPO017, pp. 99-102. doi:10.18429/JACoW-CYCLOTRONS2022-MOPO017
[n] Y. C. Nie et al., “Simulation of Hydrodynamic Tunneling Caused by High Energy Proton Beam in Copper through Coupling of FLUKA and Autodyn”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 204-207. doi:10.18429/JACoW-IPAC2018-MOPMF046
[n] R. J. Krisciokaitis and K. W. Robinson, “A Magnetic Bottle with Electrodes for Trapping Low Energy Electrons”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 110-113.
[n] J. R. Delayen and S. Chattopadhyay, “Advances in ERLs and Microwave Superconductivity for Lepton Accelerators, Colliders and Light Sources”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper FRXMA02, pp. XX-XX.
[n] K. Nakayoshi, Y. Fujii, T. Nakadaira, and K. Sakashita, “Development of an Expert System for the High Intensity Neutrino Beam Facility at J-PARC”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 154-158. doi:10.18429/JACoW-IBIC2018-MOPC18
[n] H. Smith, T. Constant, K. Crook, J. Fitch, and T. Taylor, “Radiation and Electrical Safety Systems for PEP”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2800-2803.
For LaTeX
Use Complete Form
For BibTeX
References
- G. S. McNeilly et al., “Design Study for the Conversion of the Oak Ridge Isochronous Cyclotron from an Energy Constant of K=90 to K=300 MeV”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-11, pp. 626-629.
- A. Moretti, J. W. Dawson, R. M. Lill, J. J. Peerson, and M. T. Rebuehr, “Radio Frequency Superconducting Studies at Argonne National Laboratory”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 186-188.
- Z. X. Shao, H. Gao, L. Wang, and H. Y. Zhang, “Design of Beam Position Fast-Correction Magnet Power Supply for HALS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4967-4969.
- J. Chavanne, “Insertion Devices at the ESRF”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 654-657.
- J. Chen et al., “A Novel Non-Linear Strip-Line Kicker Driven by Fast Pulser in Common Mode”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2345-2348.
- A. E. Gustafsson, S. Calatroni, R. Seviour, and W. Vollenberg, “New Methods for Thin Film Deposition and First Investigations of the use of High Temperature Superconductors for Thin Film Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC047, pp. 2995-2997.
- A. A. Garcia, B. Dehning, G. Ferioli, and E. Gschwendtner Geneva, “LHC Beam Loss Monitors”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM14, pp. XX-XX.
- M. Kanazawa et al., “Beam Test of the Acceleration System with the DDS in HIMAC Synchrotron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P048, pp. 2347-2349.
- J. L. Wilson, A. E. Fathy, and Y. W. Kang, “Investigation of Using Ferroelectric Materials in High Power Fast RF Phase Shifters for RF Vector Modulation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH194, pp. 3248-3250.
- P. Messmer et al., “Simulation-driven Optimization of Heavy-ion Production in ECR Sources”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROBAB01, pp. 3786-3788.
- M. Popovic et al., “Innovative Magnetron Power Sources for SRF Linacs”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 473-475.
- B. Morris and R. B. Saethre, “Final Conversion of the Spallation Neutron Source Extraction Kicker Pulse Forming Network to a High Voltage Solid-State Switch”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 240-242.
- Y. M. Park et al., “Development of SC Bus-Line for The KSTAR Superconducting Magnet”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU475, pp. 491-493.
- A. V. Zlobin, E. Z. Barzi, D. Turrioni, Y. Ivanyushenkov, and I. Kesgin, “Advantages and Challenges of Nb3Sn Superconducting Undulators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2734-2737.
- D. M?ñder et al., “Status and Development of the MYRRHA Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 432-434.
- Z. Duan et al., “Status of the Compton Polarimeter Project at BEPCII”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1621, this conference.
- G. Vashchenko et al., “Characterization of the Electron Beam from the Thz Driven Gun for AXSIS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 509-511.
- M. I. Bikchurina et al., “Measurement of Parameters of Neutron Radiation on the Accelerator-Based Epithermal Neutron Source”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 337-339.
- K. Fong, T. Au, X. L. Fu, R. Leewe, and Q. Zheng, “RF Cavity Resonant Control Using Mimimal Seeking Sliding Mode Controller”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOPO017, pp. 99-102.
- Y. C. Nie et al., “Simulation of Hydrodynamic Tunneling Caused by High Energy Proton Beam in Copper through Coupling of FLUKA and Autodyn”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 204-207.
- R. J. Krisciokaitis and K. W. Robinson, “A Magnetic Bottle with Electrodes for Trapping Low Energy Electrons”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 110-113.
- J. R. Delayen and S. Chattopadhyay, “Advances in ERLs and Microwave Superconductivity for Lepton Accelerators, Colliders and Light Sources”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper FRXMA02, pp. XX-XX.
- K. Nakayoshi, Y. Fujii, T. Nakadaira, and K. Sakashita, “Development of an Expert System for the High Intensity Neutrino Beam Facility at J-PARC”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 154-158.
- H. Smith, T. Constant, K. Crook, J. Fitch, and T. Taylor, “Radiation and Electrical Safety Systems for PEP”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2800-2803.
Back to search